Trapped Dice! Fast Print
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments
- Pobrania
- 186
- Polubienia
- 27
- Ocena
- 0
102 modeli
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments
My trapper keeper has a single strap sling that I use, recently in broke. I believe that it could not hold the weight or was jerked apart. I printed the part that broke and so far, it has held up.
This is a model of the Titan Trapper village from The Owl House S2E17 Edge of the World . The model consists of the central tower and five houses. Dimensions Length Width Height Tower 78mm 78mm 150mm House 1 30mm 23mm 19mm House 2 34mm…
Il faut imprimer la trappe coulisse vers le haut. Pas besoin de support mais il faudra bien gratter les coins pour un bon ajustement. La partie OPEN est fournie dans un fichier SVG annexe. Pour le mettre en place utilisez clic droit sur…
Here is my design of the board game "Le Passe Trappe" (also known as Flitzpuck). It's a fast and addictive game for two players. The print contains all required parts, the only extra hardware needed is a rubber band (I've used a hair…
Deutsch: Wenn eine Wespe kommt und sieht das fremde Nest, dann verzieht sie sich in der Meinung, dass da schon ein Wespenvolk angesiedelt ist. (So ist zumindest der Werbespruch). Skalieren Sie wie gewünscht, ich druckte es mit 90%. Nutzen…
I love the (reusable) cable ties and print them out in different sizes all the time. This is another remix from cable ties . They are flexible, made for using TPU or PP! Now, on PrusaPrinters 3D Contest “Cable Organizers” I thought I make…
This is a 6 elix trapezoidal thread screw, it's pretty fun to play with and shows the capabilities of 3d printing. It can also be used to test out your printer calibration on thight tolerance. There are three files, they differs on the…
When using baking soda to deodorize a refrigerator or freezer, we always used to just tear off part of the baking soda box. When you think about it, this doesn't really expose much of the baking soda's surface area to the air, so it's…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Eine Trüffelattrappe für das Hundetraining. Schraubbar, um innen mit z.B. echtem Trüffel aus B-Ware oder mit Trüffelöl getränkter Watte den Geruch herzustellen. Dazu Löcher um den Geruch nach außen zu lassen. Die beiden Teile sind in der…
My take on the trapped ball object. Prints without supports as long as your printer can handle 20mm bridges.
Are you tired of mice eating all of your cheese?! Then it’s time for you to step up your mouse catching skills using our humane mouse trap printed with your own 3D printer! Simply print, assemble, add a bait and catch & release using our…
This hinge uses a joint design that's unique to additive manufacturing, you couldn't make a hinge like this any other way. It's also sized to fit nicely on a 20XX-style extrusion so the pivot point is right next to the outer edge of the…
Love Medical Barrier Film, but hate having it take up space on your desk? Me too! Designed this for the 4” x 6” perforated sheet rolls. This wall mount is designed to have a friction-set dust cover and is usable in either orientation.…
M.A.S.H - Captain John Francis Xavier Trapper McIntyre - 1972-1983
This glasses case prints in place and uses trapped hinges. It also has spaces for 3x1mm neodymium magnets for a closure system. I recommend turning on support to make sure there is no sagging on the bottom of the hinges, but check your…
Name: Fidget Elevator: a mechanical curio curiously without compliant parts Video: https://youtu.be/ji-E1huV4Js Printing Instructions: https://koolfingers.com/3d-prints/printing-elevators/ Ask anyone playing with a Fidget Elevator for the…
Traps for the Trapper class that use 8 mm dice to display the numerical value of a trap. Recommended printing colors: damage traps: red heal traps: blue
We made these 30/xx mm mockups as a cheap replacement for different lock cylinders for environments with low safety requirement like garden gates and others where you not neccessarily NEED a lock but don‘t want to see an eye-catching hole…
An optimized handle that prevents water being trapped between the lid and handle. It needs to be attached with a brass insert nut. The hole for the M5 screw in thehandle is 11mm deep.
One of the first things I made to print on a 3D printer because it's something only a 3D printer can make. The middle nut will spin after all the supports are removed. I've uploaded the SolidWorks part files for this so you can edit as…
A classic assembly puzzle where you have to trap a ping-pong ball between these frames. Requires a standard (40 mm diameter) ping-pong ball. Note: You shouldn't resize the pieces in any way, because they may not fit properly if you do. I…
The Trapper's traps in Frosthaven can have many different effects. These magnetically connecting traps should help with that. The base rotates to indicate the heal/damage value and you can stack as many status effect hands on top as you…
Bonjour, voici un fichier complet pour la trappe d'accès au phare pour BMW E90 et surement d'autres modèles. La trappe ce situe dans le pare-boue. Trappe avec sa "vis" permettant de bloquer la trappe La "vis" est aussi compatible avec les…
An ear-flaps ‘trapper hat’ for our little robot pal Lucky 13. Something to help keep his positronic brain warm on cold winter nights.
petg 100% 0.20 avec support recouper une petite partie du fuselage (voir photo) ce monte et ce demonte avec les 4 vis du train
Minis for Hal and Alena Magic the Gathering's Lesbians from Innistrad Both were quoted frequently in Flavor text of cards in the First Innistrad Block. They showed up in the story of the Second Innistrad Block and were confirmed as a…
Fits up to a 32mm (1.25") wide strap. I use M3 screws and heat-set inserts to attach the handle. Don't use screws that are too long and protrude through the other side of the spool. Stick the tag end of the strap through the center slot…
I wanted to try creating an object with multiple object trapped within one another so I made this. Category: Sculptures
This is a simple nut that's trapped on a double headed bolt. I designed this in Fusion 360 with a 0.5-0.6mm tolerance. I included a small test part and both F3D files along with the actual trapped nut STL file. Print Settings Printer:…
A Funko Pop of Evan MacMillan from Dead by Daylight.
I couldn't get the original hinges to stay in tact. A user Chris Huck posted pictures of their hinges that they created as a work around. All I did was try to replicate that photo. Still a novice at design but it has been working for me…
Discover the fascination of an impossible object with this Trapped Sphere in a Cube Fidget. This model is designed as a seamless print-in-place mechanical illusion. It rotates smoothly in all directions. Perfect as a desk toy, stress…
Just the body and the Encoder cap. I also threw in a Logo front plate. Front plate was printed with 0.2 nozzle to come out nice. Get the rest of the parts from the original. Update: I managed to damage the USB port on my t114 so I made a…
Just a bit of fun Category: Other
Here on this Thingiverse page you will find yourself a very customizable trapped sphere. Use Customizer or download the SCAD file to customize the cube size, hole sizes, and sphere size. Please comment if you have any questions or…
Maybe you won’t be the coolest… but you’ll still have a nice print at home!
This is a revision of the impossible trapped box paired with my maker cube test model. Still functions as a test model with bridging, sharp overhangs, and a small first layer contact patch. This mild torture test will push the limits of…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.20 Infill : 20% Filament Material : PLA
Fits up to a 45mm (1.77") wide strap. (This is a remix of my 32mm version with other changes besides just size.) I use 5mm M3 screws and and 3mm heat-set inserts to attach the handle. Don't use screws that are too long and protrude…
This is a sphere trapped in a dodecahedron. I forgot where I got the dodecahedron but it was somewhere here on Thingiverse. There is a 1mm clearance between the sphere and the cage, and the diameter of the sphere is the same as the…
I had trouble printing a Ball in a Cube. So I designed one for myself with 6 flat side. If it is printed well you shouldn't see where the ball was on the build plate. I hope you don't have much troble printing this. Maybe the cube is a…
I decided to make a dumb sign out of a meme I saw.
Easy to print polyhedron trapped in a cube - its a demonstration of the principles of 3d printing and at the same time a test of the clability of bridges. no supports needed brim recomended, but not necessary scalable
Top half is thick, bottom half is thin. looks as if the stick figure is trying to escape
Just having fun with the formula. This version is meant to have the inner spiral ball trapped inside the outer cylinder. Print the ball first and then while printing the outer cylinder pause the print and add the ball before it finishes.…
I recently purchased a Nature's Way Birds Cedar Hopper Bird Feeder. Unfortunately already 2 birds got stuck in the suet cages because their product doesn't come with a lid / top mesh to close the cages as most do. The first bird didn't…
A sphere trapped in a skeletonized cube. This is a nifty object that will baffle people as they try to figure out how it got in there!
A very simple game to play. You need two elastic bands. Print Settings Rafts: Doesn't Matter Supports: Yes Infill: 20% Filament: any PLA any Category: Games
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Supports required
A Dodecahedron die trapped inside of a cube.
Hinterradfederung, Dämpfer, Attrappe Als Stütze für ausgetauschte Dämpfer, als Deko oder sonst was. Als Modell diente eine X Fusion o2 RL (Lochabstand 19cm) ______________________________ Rear wheel suspension, damper, dummy As a support…
Hier ein Selbstgemachter Schaldämpfer als Attrappe für 6mm Kugeln
Before trying to print this, know that the model is exactly what I intended. My prints so far have been tricky with some surface issues because I'm using a new-to-me PETG HF for white. That aside, I love the results! The round top of the…
This modification solves many problems of the Kentstrapper Verve. The main problem was the gap it had on the y-axis, which was completely removed out thanks to a double LM8U ball bearing. The tensioners on the x and y axes have also been…
Cool design to demonstrate how 3D printing works Print with supports and raft Category: Other
This coaster is part of the Dead by Daylight Killer Series. It is a two colour print. 0,16mm no support Color change at layer 14. Have fun!
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG. 3MF Files Prepared for PLA (With Filament Color Swaps & magnet trapping position) Note 1 : Drop me a comment if you need another icon shape, will upload model as soon as…
Idk what this is. It's funny to print though lol.
bouchon à mettre en lieu et place d'une trappe à eau de camping-car dont on ne se sert plus
Customized version of http://www.thingiverse.com/thing:273099 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=273099 Instructions Using the following options: basey = 75 basex = 190 borderwidth = 2…
I thought about what it would be like in the second dimension and how everything would be different, and how realisation of being observed constantly would be traumatising… which we kind of could be happening to us right now by…
THIS IS MY FIRST MAKE it took me 3 hours an tinker cad for the hive contest
William Afton Head(SpringTrapped), for cosplay? you can use it as a head inside the mask, i made it for same reason. I tried to make more realistic skull for my springtrap suit. You better slise it before printing? because its solid, just…
An extraordinarily detailed 3D printable model of a menacing goblin crouched low, carrying a heavy wooden cage strapped to his back containing a trapped, glowing Jack-o'-Lantern monster. Features sharp toothy grin, stitched cloth…
Just a little demo of some things you can do to create otherwise “impossible” prints. In this case, the cube and ball are printed with no support material, no glue or hardware, and no MMU. To Recreate: print and assemble part #1,…
petit outil permettant de facilement lever la plaque d'accès au skimmer du système desjoyaux, il faut le fabriquer idéalement en ABS ou en PLA mais ne surtout pas le laisser au soleil (forcément …)
Motor mount for the Filawinder geared motor modified to use trapped square nuts rather than heat-set inserts. Category: 3D Printer Accessories
If you are building a Voron, you may want to just buy the functional parts, and then print the rest yourself. Instead of using a house fan (yes, you know you were thinking about it!) to cool you electronics compartment while you print the…
J'ai modélisé cette trappe il y a quelques années mais e ne l'ai jamais publiée ici. C'est chose faite ! Il s'agit de la trappe cache pile pour la console Watara supervision avec les angles arrondis comme l'originale. En photo vous…
This is AI generated using Meshy Ai of the Trapper Raider player icon from Fallout 76. I wanted to make some Fallout cabochons for my beadwork. We have not tested it on our Creality Halot-Light yet. Printer: Elegoo Neptune 3 Pro Program:…
If you are building a Voron, you may want to just buy the functional parts, and then print the rest yourself. This quick print allows you to mount your display to the 20x20 extrusions, so that you can use it while you finish printing the…
A cute agent duck character inspired by modern computer games and tactical action games. A stylized collectible duck with a distinctive agent/operative personality, combining gaming aesthetics, tactical gear and playful rubber-duck…
A cute agent duck character inspired by modern computer games and tactical action games. A stylized collectible duck with a distinctive agent/operative personality, combining gaming aesthetics, tactical gear and playful rubber-duck…
A cute agent duck character inspired by modern computer games and tactical action games. A stylized collectible duck with a distinctive agent/operative personality, combining gaming aesthetics, tactical gear and playful rubber-duck…
Ready-made for prints. If you need more height, cut the model into parts at 9mm or 10mm, then scale the Z-axis of the lower part. JYSK products fit the model: https://jysk.fi/inspiration/tyylikas-ja-moderni-trappedal-sarja…
Elite Trapper Solman Model made by inspiration of game counterstrike 2 The figure stands on its own, remember to scale the model before printing! Model from picuters is printed on my Print profile settings!
Design plus simple, et probablement moins bon, que la pièce originale qui était cassée. Semble faire l'affaire pour le moment. Je pense qu'un re-design complet à base d'aimants serait plus pratique. Peut-être pour une v2… Conseils…
trappe compartiment a piles de remplacement pour jouet
Trappe permettant de passer le câble de charge d un véhicule électrique
Printed upright, with supports for the bottom and the inside. No supports needed for the swords.
There's also a cap that can be attached with the included strap. Use a M3x5 or M3x6 Print the strap in TPU Try scaling up the part if the thread is a bit tight, it worked fine for me.
He was rude to me at wallmart. Sooooo print him if you want i guess…….
A spooky-funny pun gravestone for your Halloween yard or desk: a fictional parody name with a cracked, weathered stone look. Scale to taste. Part of the BySCM Halloween collection. AI-generated model (made with Meshy AI), cleaned and…
the teeth are diamond (girls best friend, not the playing card diamond) shaped to reduce probability of fin damage if you have a fish that is determined to figure out how to take the ride. sized for 3/4" pipe. it has an internal diameter…
3D-Druck-Vorlage eines realistischen Infusionsbeutels als Attrappe zum Spielen, für Airsoft, Cosplay oder LARP.
La pièce a été reproduite par mes soins (novice en modélisation) elle aura peut être besoin d'être collée en place ou chauffée pour tenir. ça dépend de l'état de la pièce qui s'emboite dedans. Merci de faire des propositions ou des…
Clip permettant la fixation le verrouillage de la trappe au sol derrière les sièges conducteur et passagé. Clip used to secure and lock the floor hatch behind the driver's and passenger's seats. Category: Other
⛵ Barrette de fermeture pour trappe de 420 (voilier) Petite pièce technique imprimable en 3D destinée à remplacer la barrette de fermeture d'une trappe sur un dériveur 420 ⚓ Sur mon bateau, la pièce d'origine était cassée / manquante,…
## Design Concept The Ant-Maze Trapper is designed as an ingenious device for trapping ants using a maze-like mechanical structure. It is built with multiple pathways that lead ants into a central reservoir. ## Applications This trap is…
This box uses straps anchored to the bottom and top for hinges and latches to prevent layer separation under heavy load. Larger boxes have a handled top option. The Field Box-Bottom Shell InnerTabbed doesn't work with the Field Box-Top…