76 modeli
Waste Water Key for Dethleffs Motorhome Grey Waste, we have glued and put a screw in the tighten it (also put some duck tape on to make sure its tight) at moment its working very well
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Works on the Babytrend Expedition Wagon. Made it to hold a bike on the front if a kid gets tired of riding it. Print with supports for the arches. Infill: 25%+ Layer Height: Works fine with 0.3mm
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
I needed a wall mount for my switch and wanted something else than using the screw holes on the back so I designed this. Print with supports. You need to remove the cables to mount it into the frame but once there, it stays there for you.
Wydruk około 7,71 €–9,42 € nettoWstępna wycena jednego wariantu
Apologies for the absolutely awful photo of the print, the lighting is terrible by the rack. Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack. Likely fits other network switches, but beware that some of the Trendnet…
Wydruk około 3,02 €–3,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gasoline Additive Tank adapter for Ford Focus 3 Trend (HATCHBACK) 2011 (EU/FR). Work perferctly after many tests and uses on my Ford Focus 3 Trend (HATCHBACK) 2011 (EU/FR). Maybe work for other models (US/UK/EU). ONLY to USE BEFORE you…
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Backstory In the midst of 2025, the peak of mini bucket-crazed social media exploded. Some folks went so far as to summon their inner Pokémon trainer and declaring they " gotta catch them all! " My curiosity was piqued to see so many of…
Mario with a pumpkin head. gcode includes organic supports.
Does your significant other keep buying trending water bottles but has no where to put them when taking walks with the little one? Fear not, this water bottle holder will secure even the largest trendy water bottles. Might work for other…
TRENDnet TEG-S762 rack mount for 10-Inch racks as an extension / version on the wonderful shelf for the Lenovo Tiny by Stougaard print. Similar design, holds the switch in place even when pushing / pulling cables into the switch. Same…
A smartwatch stand for my kid's 4G/GPS smartwatch produced by Garett - model Trendy 4G. The magnetic charging cable slides into the slot and is hold there in place.
Print settings: 0.2mm layer height 3+ bottom layers and 4+ top layers 4 perimeters w/ 0.6mm nozzle or 6 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA should work fine but I'm not sure about the latch flexibility Specific build…
The model was originally 2 separate models that I edited and fused together, after many hours of work to make a model almost identical to the new 2025 Volkswagen T-ROC Trend
This model uses the following parts: Parts 100 RPM motor 12V AC Adapter 12V Panel Mount Barrel Jack Speed Controller Canopy Ties Heatset Inserts 11 3x5x4 Heat-set Inserts (4 for base, 4 for front cover, 1 for cam, 2 for bouncer clamp) 1…
This model is perfect if you need to calm down and etc.
Trendy can holder. good for the summer.
Ester cap for RV camper. Fitting my Dethleffs Trend A5887
There's an ongoing trend with the Arch / Dune pattern, including floor rugs, serving trays and much more. This print will provide you with a basic dune pattern in the form of a serving tray. It's suitable for A1 mini, with a size of…
Simple and compact Holder for Digital Angle Rule by Trend. Used for the rule here: You can Buy me a coffee if You feel good doing so :) ( And very big Thank You For interest in my work ) https://www.buymeacoffee.com/warlogh
Im new to 3D modelling so if you can make it better please do give it a remix. I printed in PLA all settings left as standard: Shell thickness 1.2mm density 15% with supports
I switched my PC for my Technotrend PCI-E DVB-CT (V7) Card. Now I need to have a “Low Profile” Slot cover. The original, factory made is long gone. May be useful for you. Printed on the side & enabled “Support on Build Plate only”. I…
A shadow board gridfinity bin for a Trendnet RJ45/RJ11 crimp tool.
Tapa cubre amortiguador gol G5 Trend
Gridfinity holder (1x5x6 units) for the TRENDnet TC-PDT Punch Down Tool.
The Massca M1 has an included bit depth adjustment tool which is easy to lose. This part is designed to slot into the base of the tool and hold the adjustment tool as well as the included allen wrench. Support required on build plate…
Needed some sockets on the countertop and didnt want to spend a fortune buying some especially since I already had some leftover wall sockets. This specifically designed for Trendiswitch sockets but I think socket screw locations are…
BrosTrend S3 1U High-Airflow Rack Mount This custom 1U rack mount integrates a fanless BrosTrend S3 switch into a 10-inch cabinet (Lanberg). Maximum Ventilation: Large top and bottom cutouts expose 100% of the switch’s passive cooling…
a little holder or a small vase in the style of a cube of bubbles 3D PRINTING SETTINGS Standard PLA settings. Infill density 15% Shell thickness 1.2 mm & 1.2mm Support and Adhesion recommended Placement - Touching build plate Measures at…
Remixed holder to use it on thicker handle mount.
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color. Sorry for the abomination of a title but it seems to be working.
Replacement knob for a roughly 12 inch Home trends desk fan.
Please comment, rate, and post a make! A simple mount for the TRENDnet 5-Port Unmanaged 2.5G Gaming Switch . The screw holes are sized for #4 wood screws. Be sure to check out my other models!
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
My original Trend Air Shield had niCad battery with a short lifespan and long charging time. I made this adapter to use readily available Ni-Mh AA batteries. The Ni-Mh batteries and chargers are inexpensive and have a similar voltage.…
Another model of the hook for snap 4, that you can find on printables is great, buuuuut because it has no stopper or regulator bags are hanging too low (sometimes get dirty from wheels), so I've designed this. Requires 1 DIN912 M6x30…
A mount for Trendnet TPE-S44 POE switch for 10" racks. Front plate is by @Diew
very popular!!! lights my life
This holder is designed for the Trend brand pocket hole jig - but it may work with others. Being symmetrical, this holder can hold your jig either way round, and includes detents so you can push down on one end of your jig for easier…
I have a TRENDnet TE100-S5P+ Ethernet Switch which has a broken housing, so I designed this minimal housing for it. I think this is way better than the original one as it has a regular shape which makes it easier to place. I'D RECOMMEND…
I printed this in black prusament PLA. There are two big holes spaced for the media center then two screw holes 120mm center to center, 1.8 mm in diameter. This was perfect for the screws I had on hand and the mounting slots on the back…
This is a holder for a TRENDnet TK-409K KVM. The holder is hanged on the side of an Ikea Ivar shelving system. The TRENDnet TK-409K is a 4 ports Keyboard/Video/Mouse switch. I suggest using 30% infill. Support is not needed. This object…
If you hate burning your Hand at those vending cups or if you just simply want to drink your coffee with style, then this thing is what you've been searching for. This clip is made for cups that have a top diameter of 7cm, a bottom…
Mount for a TRENDnet USB to Ethernet Adapter. Includes two screw holes. Purchased for a Raspberry Pi, great solution for mounting and cable management. Made specifically for the TU3-ETG adapter but sure will fit any model. Best printed by…
Holder for A HITRENDS Power Strip with USB, Featuring 5 EU Sockets, 2 USB-A Ports, And 2 USB-C Ports, Flexible Cable, Individual Switch, Smart Charging (5V/3.4A). It was made by Underware 2.0 Customizer. Link:…
"Trend T7EK" adapter to “Trend GB160” 16mm guide plate that came with the "Trend H/JIG/A/KIT Contractor Hinge Jig" Print with 3 walls and 25% infil for strength. You will need 2x M4 x 6-12 countersunk bolts, they may have came with the…
A carrying case for the UT363. It is crucial to protect such devices from dust and other external factors.
The soap dispenser supplied with Temal Trend bathroom vanity doesn't handle regular soaps but rusts beyond repair. This small ring is an adapter for a regular Bliw soap bottle, allowing it to be placed inside a Temal soap dispenser hole.…
Inspired by nvidia ion gaming of the Nintendo Homebrew Discord, I bring you the American Megatrends Sign! The geometry of this isn't the greatest, so if you can clean it up better than I can feel free to remix it. Included is an STL file…
This holds a Ubiquite USG and a Trendnet TE GP102 POE router. This is one file setup to print on large format printers (Elegoo Neptune Max here). Let me know how this works out if you have the same router setup. If you have another one I…
I have a Leviton 47605-MDU where I terminate the network stuff in my home. I wanted to use the TRENDnet Ethernet over Coax 2.5Gbps Adapter (model TMO-312C) and I didn't want it just hanging in there. This bracket allows you to snap it in…
Case for the Trend DAR/200 Digital Angle Rule. It uses five 4x2mm magnets to stay shut and 1.75mm filament for the hinges. there is also space for a spare battery. I also did a color change at layer 3 & 10 (0.2mm layer height) to…
This is a mounting bracket for the TRENDnet TK-207K KVM. It is a 2-Port USB KVM Switch. The device labeling is upside down. I preferred to have the heavy cables downward.
Printed in ABS for extra strength
https://www.amazon.com/dp/B00BK4W8TQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Has a spot for an embedded m3 nut. You should be able to pause at layer and drop one in.
I created an Soda Trend DeluxeTM bottle adapter for PET-Bottles. With this adapter its possible to adapt small PET-Bottles(500ml) to your Soda Trend Deluxe. Ion my first version the PET-Bottle needed to be maximum filled, to insert the…
Dust-extraction adapter that connects a Trend CRT/MK3 (CRT/MK3/EURO) router table's fence port to a Parkside PPWD 30 wet/dry workshop vacuum hose. Designed to real caliper measurements, not nominal specs: Trend port: 58.3 mm ID / 62 mm…
This is a holder for a TRENDnet TK-207K KVM. The holder is hanged on a unit side of the Ikea Ivar shelving system. The TRENDnet TK-207K is a 2 ports Keyboard/Video/Mouse switch. I suggest to use 30% of infill along with support that…
The original by @remington, was just a little too bit inset into the router base, so I dropped it down 2mm.
This is a new box for the Trendline Feinmechaniker-Bit-Set 32-teilig from German Globus Baumarkt ( https://www.globus-baumarkt.de/p/trendline-feinmechaniker-bit-set-32-teilig-0761060140/ ). It is printed in place and has a movable hinge…
DIN rail mount for Comtrend GRG-4362 XGSPON ONT , used by CETIN in the Czech Republic. Three-part print: a spring-loaded DIN-rail clip plus two screw-on hooks for hanging the ONT.
added a hole for the power cable
We purchased a Trendnet web cam for monitoring our 3D prints. However we found that we wanted to use it with a tripod but it is not designed for that. 3D printing to the rescue! I designed a mount interface between the TrendNet camera and…
I wanted to have a stand for the hair clipper where it's upright to keep the charging hole exposed also, you can secure the stand with double sided tape. As mentioned in the summary, this stand is extremely rudimentary and it uses the…
Shim for the Maco Multi-Trend and Maco Multi-Matic door latch, suitable for both wooden and PVC windows. Used to shim the anti-draught door latch when it does not reach the striker plate.
Needed a wall mounted solution to store all the router table accessories. Created a unit that hold 5 table inserts, the table height adjuster, the spanner for the half inch collet and the trend depth gauge. Has 4 mounting points but is…
This is a gasket made to be printed with 100% infill in flexible TPU filament, or cut out of a true gasket material. It is to be installed as the topmost gasket in a Hitachi carburetor for a first-generation Subaru Justy/Trendy. I don't…
A wall mount for the 80 series of gigabit and POE TrendNet switches. They are all very similar in size. Some will be snug, some will be 1mm or so loose but still be held securely.
This charming number 6 is ready for Christmas, wearing a cute Santa hat and standing like a little character full of personality. The simple, bold shape makes it easy to print and fun to paint – classic red and white for the hat, and any…
This adorable number 7 is all dressed up for Christmas in a cosy Santa hat and standing proudly like a little character. With cute proportions and a clear, bold shape, it’s perfect as a fun festive figurine for desks, shelves, window…
A cap to replace the permanent one on a water trends v-pack chlorine cartridge. Pry off the melted on cap and screw this one on so you can refill the canister with your own chlorine
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color. Sorry for the abomination of a title but it seems to be working.
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
https://www.amazon.com/dp/B00BK4W8TQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Has a spot for an embedded m3 nut. You should be able to pause at layer and drop one in.
Backstory In the midst of 2025, the peak of mini bucket-crazed social media exploded. Some folks went so far as to summon their inner Pokémon trainer and declaring they " gotta catch them all! " My curiosity was piqued to see so many of…
Case for the Trend DAR/200 Digital Angle Rule. It uses five 4x2mm magnets to stay shut and 1.75mm filament for the hinges. there is also space for a spare battery. I also did a color change at layer 3 & 10 (0.2mm layer height) to…
UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…
