119 modeli
I made this model to keep my CalDigit TS3 Plus and a G-Drive SSD tidily on my desk. Prior to this they were leaning on each other and liable to be pulled over etc. Simple print, no supports required, prints in 2 hours, looks great in…
Wydruk około 3,75 €–4,59 € nettoWstępna wycena jednego wariantu
Case for the MKS DLC 32 v2.1 board and the MKS TS35-R display. The tube for wires is used with a diameter of 12 mm Корпус для платы MKS DLC 32 v2.1 и дисплея MKS TS35-R. Трубка для проводов используется диаметром 12 мм
I could not find a ready made case, so I decided to design something by myself the case is for the Makerbase MKS TS35 V2.0 touchscreen (shipped with MKS robin nano V3) it is the one with a control button but no reset switch maybe someone…
F3Z and STEP files
Used material: 6x DIN 912 M3x10 - 4x for TFT, 2x for cable winder 4x DIN 7380 M2.5x6 for MKS-Pi (or any other similar screws) 10x M3 heat inserts - 4x for TFT, 2x for cable winder, 4x optional for mounting. I plan to add MKS-Pi + TS35 on…
We have the Caldigit TS3+ USB docks at work and very small desks. I designed this to move the docking station to the underside of the desk to save space and remove the cluttered appearance of the cables. These and the Dell WD19 version…
This is a remix of devin's underdesk mount. I've made the following changes: cut out hole in the floor for better heat dissipation removed overhangs so it prints with no supports added chamfer to the screw holes so it interfaces better…
Work in progress
My goal was to design a CalDigit TS4/3 under desk mount that would fit my needs: Multiple mounting options, under desk, desk top, wall mount etc. Tabs that to retain the dock but allow for easy removal should you need to remove the dock…
This is the case and the mount for MKS Pi-TS35 TFT Screen on Voron 2.4R2
Simple articulating mount for the Makerbase TS35 v2 screen (with encoder). Mounts as a replacement for the tower top cap. I'd suggest X tower, since that one is the closest to the mainboard and only one actually close enough to reach with…
I switched my ender to klipper because a raspberry pi is just too expensive and the sonic pad is a "rather" closed system (at the time of my upgrade, it could change), I selected the solution of MKS. Since the layout of the raspbarry 3 is…
This is a case for the MKS Pi touch screen with hinge for mounting to extrusion. I created this to add KlipperScreen to my SuperRacer, which has the Pi in the top, using this mount . You can mount it to the frame with a 2 or 3 M3 screws…
Case for MKS DLC32 board and TS35 screen for TwoTrees engraver TTS55 or TT5.5S. You need : - 2 screws M3x10 for frame 20x20 mount - 2 Tnuts M3 for frame 20x20 mount - 7 screws M3x10 countersunk head - 8 screws M3x5 for the board and…
This holder mechanically attaches to the multiboard using threaded screws (see https://www.printables.com/model/980088-multiboard-compatible-bolt-for-small-thread ) The caldigit generates significant heat, so there is a clearance between…
PET-G Prusa Orange Layer 0,2mm 3x perimetr Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Notes: PET-G Prusa Orange Layer 0,2mm 3x perimetr Category: Electronics
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Dust Collector upgrade for Rigid Table Saw (model #TS3650) The original dust collector port attachment has only a 2.5" port for a…
Box for MKS DLC32 board with box for TS35 LCD display. I use it for my laser. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Plastika Trček PETG any Category: 3D…
If you’re looking to measure larger quantities than what measuring spoons offer, you can also print these clever measuring cups. Made by OogiMe, the popular designer of kitchen and baking 3D printable models, these measuring cups allow…
I wanted to make a saw sled for my Ryobi RTS30. Since this is a contractor saw, it doesn't use a standard miter slot. I searched the webs and didn't find one for my saw. Using the original Miter Bar as a guide I made this. The saw is full…
Case for the mks pi ts35 lcd.I drilled the holes for 40x20 or 20x20 profile. It was created in Fusion 360 for use in a corexy that I built myself.It worked without any problems.
Under-desk mount for the CalDigit TS3 Plus Thunderbolt 3 Dock
Screws that you need: 4x M3x10; 4x M3x15; 4x M3 Nuts; I have printed with PETG, but also PLA is good.
for Kingroon KP3S Pro V2 LCD link (MKS TS35 LCD) https://ko.aliexpress.com/item/1005004545952372.html?spm=a2g0o.order_list.order_list_main.12.1c46140ftQM0RC&gatewayAdapt=glo2kor https://youtu.be/TQIzUf1kfEM
This mod doesn't require any additional parts beyond what's in the original Bill of Materials (BOM). The parts have been designed to accommodate the original logo inserts. Printing instructions STLs are oriented correctly No support…
Компактный корпус для размещения сенсорного дисплея TS35-R (без ручки) размером 121х76х23 мм для крепления к конструкционному профилю 20х20 или 20х40. Данный дисплей работает с платой DLC32, которая работает с чпу и лазерными граверами и…
I made it for my build of a Laser Engraver. It was printed without support on Ender 3V2.
STILL WORK IN PROGRESS! To Print the full raiser please visit https://cults3d.com/de/modell-3d/werkzeuge/creality-k1-max-deckelerweiterung becaus it is not a free model so i will not provide the original files! UPDATE 07/01/24 Fixed the…
I've created a mount for the MKS TS35 touch display which comes with the MKS PI. When the MKS PI is mounted inside the case it's pretty useful to have the display attached. It also comes with a stylus holder and stylus. To mount this you…
VELA DEL NACIEMIENTO LITOFANO, #CHRISTMASXCULTS https://cults3d.com/:1582995
This Adapter is for all QIDI users who want to upgrade to the MKS-Pi system for using Klipper in the future. You can order this system on amazon here: Makerbase MKS-Pi with preinstalled Klipper To add the screen to your X-Max, you also…
LEGO Commer TS3 Ecurie Ecosse 1959
This is a case for mks ts35 display, i made two versions, with hole for encoder and other without, and i not test fit de back side. Any sugestions i repair the model. Print Settings Printer: FlyingBear Ghost 4S Supports: No Resolution:…
The back has been modified to accommodate the bracket created by Oleg Romanov. The screw holes have been adapted to fit the new bracket. I've also enlarged the holes in the piece that rests on the profile to accommodate the M5 screws.
Creality K1/MAX LCD housing for MKS PI-TS35 for board swap to MKS PI or MKS Skipr
Version of 2022 Updates: More strong; Small improvements; Back plate without screws; Can be placed on the right or left side of the printer; Version compatible with insert nuts(I used M3x3x4.2mm insert nuts); Version without Reset button;…
Mount for the MKS PI-TS35 display. The file lcd_case_front should be rotated 180°that the face is down on the build plate. Printed in ABS with standard Voron settings, 4 walls, 40% infill etc.
Adapted RailHolder and Slide for Rigid TS3650 10" table saw with miter fence. The original model I found and printed had the wrong channel size, so I had to create this one to match the channel on my fence. Use two of the 6mm knobs for…
A clamp to hold your TS3+ power supply under the desk. Screws are needed! Screwholes have a 3mm diameter.
This is a remix add-on for the HAUNTED HOUSE LAMP WITH LITHOPHANE 3D on Cults3D. I found that not enough light got into the moon. So, made this in Microsoft 3D Builder Category: Art
I made a simple mount for the MKS TS35 pi screen that uses the holes in the frame of the MK1 rook. 3mm self tapping screws hold the screen in place.
Since step file was never uploaded dis just some small modification using Prusa Slicer.
I designed a unit that can both hold a laptop and a compartment for TS3+. Design has holes for ventilation. The foot goes to the back part for heavier laptops.(With the help of a lighter it will melt its self down to the place)
MKS PI board was designed by Makerbase to replace the Raspberry Pi to run Klipper firmware. Board allows for easy connection of an ADXL345 3-Axis Digital Gravity Sensor Acceleration Module. The case houses both the MKS PI and MKS TS35…
These pieces are meant to core magnetize the Weilong GTS3. I printed these with a Bambu Lab X1C at a 0.08mm layer height, with brims enabled at 5mm width for adhesion. At least for the X1C, I've had trouble with getting the printer to not…
This is my design of MKS TS35 V2.0 screen mount for Flsun Q5 - version 2. This screen comes with Robin Nano v3 board, I bought the board and decided to make this mount. It uses the standard screen hole of Flsun Q5. No cutting or any…
A front mount for MKS TS35 screen for the Voron Trident machine. It was designed as drop in replacement of Mini 12864 holder and has only one single printed part. The MKS TS35 is larger than the Mini 12864 one, so the panel is 4mm taller…
I designed this slide to fit my Rigid TS3650 table saw to use the featherbaord and printed it in PETG (PLA would work well). I made it for the 6mm version of the featherboard and used a 50mm bolt with the knobs in the original build and…
Makerbase LCD TS35-R stand
This is the ducting adapter I used in my TwoTress TS3 Enclosed Laser Engraver video, it allows you to connect the stock 6mm ducting to another 120mm fan and 4" ducting to exhaust the smoke. Category: Parts
Halterung MKS PI-TS35 fuer Voron Trident oder 2.4 gedruckt in ABS der Touch Screen ist 30 Grad geneigt passt an Stelle des eigentlich vorgesehenen Displays es werden 4 Schmelzgewindeeinsätze M3 und 4 M3 Schrauben benötigt
Adapter to use a Vedella soldering iron with the Dremel workstation.
Had one with the same problem. Found the same problem with the file. Slicer said nope. Found a missing face and an internal extra shell. Fixed those, made sure face normals were all good and it not only slices nice now but it's 1/6 the…
This is a mount you can print that will attach your Cal Digit TS3+ and power brick under you desk. Designed for for us with these screws , #6 x 5/8" pan head w/ #2 phillips/#1sq.
Mount for Voron Switchwire
Modified Rpi Bracket to fit the new Opi 3-LTS controller
With this mount you can install a Makerbase PI TS35 touchscreen on X-Plus. I am using it with a SKIPR motherboard. Use the original screws to attach the adapter to the printer, then you can use small self threading screws to secure the…
Compatible with all FLSUN that use originally TFT24
A minimalist mount which locks the Audioengine D1 DAC on the top of CalDigit TS3 Plus dock.
I really like this dock, but it sits a bit too close to the desk and the cables that come out the back interfere with other stuff I have behind it. This riser fits into the grooves on the bottom of the dock and lifts it up about 15mm.…
This is a replacement part for number TH100067, table saw belt guard. This is an obsolete part, in itself and as a cover set. Instead of printing the swivel mounting tabs pins, I used two 5mm screws through threaded holes (no need to…
Housing - DLC32 V2.1 Board with TS35-R Touch-Display for Laser 3 Parts plus Feeds With a hole for RESET-Button And Mount for 40x40mm Fan Category: DIY
These adapters let the Easy Omniwheel mount onto a Feetech STS3215 servo, commonly used in the LeKiwi and HuggingFace SO-ARM100 arm. The EasyOmniWheel_to_FeeTech_Hub.stl is the easiest & quickest to print and seem to work okay on a LeKiwi…
This is minimalistic Amazfit GTR3/GTS3/GTR4/GTS4/T-Rex2/Cheetah charging stand. Original model was created for round Mi Band charger. I recreated the similar model from scratch when I have switched to Amazfit GTR3. Requirements: M3x12mm…
Mount using original screen holes for the MKS TS35 Screen. Support Required. Used M3x8 bolts and nuts to attach screen to holder and original bolts to attach mount to printer. Step file included for modifying
Reduction to PI TS35 display for ENDER 6/ CR10S
NOTE: This part has not been printed/tested yet. It might tip… I needed a clean-looking stand for my laptop and a spot to put my Caldigit TS4, so I created this laptop stand. The stand sits at a 20 degree angle, and I can easily adjust it…
Bracket compatible with flat mesh skirt for Ender 3 NG . Dedicated for MKS Pi-TS35 display case. Bracket requires 4x M3 heat set inserts to connect with the skirt and 4x M3x8 screws to secure the display. Case requires 4x M3x8 screws. For…
Panel mit Schalter für einen Kosel Pro mit einem Makerbase MKS-TS35 Display. Der Schalter hat einen Durchmesser von 16. Die Lüftungslöcher dienen auch zum befestigen der Schrauben.
Mount\bolts directly in place, using the factory grab handle mount location use pet g required to have new button head m6 x 25 mm bolt to replace stock bolt. Stinger Mounts A pillar mount for 2024-25 Chevy GMC 2500 3500
I needed a mount for a case by "SteFix" here https://makerworld.com/en/models/912392-makerbase-mks-ts35-r-case#profileId. The case is great BUT for positioning and not being in the way of the gantry movement of the cnc i needed to lift it…
I remixed the model using original Voron CAD models, since the skirts were at completely wrong scale to the whole 3D printer. Skirt STLs need to be flipped after importing into slicer. I also added Multibody variant of the faceplate if…
Combined two models to make a TS35 screen panel for the Ender 3. V1.0 - Added some support at the joint to support the weight. v2.0 - Cleaned up protruding spots and added a 40mm fan vent hole. There is some minor artificating inside the…
Vertical stand to hold a Caldigit TS3 Plus dock and two external SSD drives
Similar to other brands, this shortens the cable more neatly than the included do-hickey Category: Audio
Adapts https://www.printables.com/model/282522-pi-tft50-mount to accept https://www.printables.com/model/273885-mks-pi-ts35-box
This is a remix of: https://www.printables.com/model/640821-btt-tft35-spi-displayadapter-for-sidewinder I made it, because the measurements didn't match the dimensions of the normal Artillery Genius "not the pro". Now it fits like a glove…
Clips on the bottom allow fence to slide. Printed on side for strength. Designed in Onshape, Public space.
Parametric screen panel SCAD for Anycubic Predator, designed and rendered for MKS PI-TS35. Uses BOSL2 library, commit: f9e6e67acfbfd2a3c620c59e57d0d9023037bb35 .
Original build: https://cults3d.com/en/3d-model/game/mech-battle-arena I printed a bunch of these mech battle arena parts and assumed I could build some combination of the parts for a "two map battlemat" but it required an additional 25mm…
A colleague of mine broke his choke handle while starting his TS360. As this is quite old and we live in France, it was fairly expensive to get a new one. I designed it and printed in PLA first, but the layer adhesion was not optimal, so…
for mounting use 4 M3*6 FHCS and 4 M3*6(up to 10mm would work) BHCS
Modified the part called BTT Mini12864 Case Adapter to now fit the MKS Pi case mount created by TownDrunk. https://www.printables.com/model/280841-case-for-mks-pi-ts35-touch-screen It is designed to be installed at the bottom of the…
I designed this holder in a pinch. It is not the prettiest, but it is sturdy and fitting my needs. Namely: Does not require drilling any holes in my tabletop Hang on my under-desk cable tray ( model I use ) Hardware While the holder does…
MKS TS35 new display case Category: 3D Printer Parts
Panel to add a DC Barrel Connector for mks-pi-ts35-box without reprinting the enclosure. Print on the side, no support needed. Diameter of through hole is 8mm. I used the connector as one of the picture
Esse Painel para Display do MAKERBASE MKS TS35 / MKS TS35-R ela serve para esses dois tipos de tela, pra vc q gosta de fazer seus projetos ou mudou a tela da sua impressora acho q este painel pode te ajudar, deixando tanto os projetos…
Wall and ceiling mounts for the satellite speakers for the Philips HTS3565D/37 DVD Home Theater System. Currently in beta, the ceiling mounts haven't been tested yet and there is no center speaker mount yet. Ceiling mounts are designed to…
This is the modification to replace the stock TFT screen with the Touchscreen TS35 with Mks Pi mounted on the back. The design has a 3510 24v fan mounted on the side to cool both the Pi and the screen. It also has built-in cable…
About https://www.cambrionix.com/products/thundersync3-c10
I'll admit this is pretty niche, but I have two CalDigit TS3+ units and they don't stay upright on my cluttered desk. So I made a small stand for them. Easy print, works well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
This is a custom made handle for the TS32. I didn't like the stock handle and the fact that you need two hands to reach the Buttons. This version also stops it from rolling over and the paint won't get scratched so easily. If you have…
I have printed this and saw the mistakes I made and changed them but didn't reprint to test. Category: 3D Printer Parts
