Wyniki wyszukiwania: under

Under Desk Drawer

Also check the model out on MakerWorld for BambuLabs printers print-profiles! Update 6th May 2023: Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few…

Focusrite Scarlett 2i2 Under Desk Mount

Does not require support material Print with back face (power cord plugin area) on the print bed

Ford Maverick Under-Seat Divider (FITS)

This is a divider for the Ford Maverick rear under-seat compartment, it utilizes the Ford FITS integrated mounts. The design is comprised of two main parts, the divider and the FITS brackets. The brackets bolt on to the divider using…

Sanjay Mortimer E3D Founder Commemorative Hex Tile

Just a simple hex tile people can print to honour Sanjay, one of the co founders of E3D who passed away on 11/27/21. Assets include Fusion360 and STEP files should anyone wish to modify to fit a hex tile pattern they already use. Gcode…

House under construction in scale H0/HO and TT

I printed everything using 0.1 layer height and without supports . I recommend using fuzzy skin with the bottom part of the house with: fuzzy skin thickness: 0.3 fuzzy skin point distance: 0.3

Building Under Construction

Building Under Construction Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new. These models will help you do…

The Queen of the Underworld

Building Under Construction - Elevator Shaft - Part 2

Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…

Building Under Construction - Cargo - Part 3

Building Under Construction - Cargo - Part 3 Cargo to make your construction site look in use. Ladders to climb to the next floor, control panels, safety fencing, barrels, and more. To add a Diesel Generator to the construction site:…

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

Intel NUC under Desk Mount

I designed a under Desk Mount for my Intel NUC 10 (NUC10i5FNK). It is for the Version without HDD (only PCIe NVMe Drive), the HDD Version is higher... The NUC has 4 Rubberfeets on the Bottom. And there 4 matching Holes in the Holder, that…

(May The 4th) X-10 Thunderwing II Kit Card

“Luke, use the Brrrt” - Fly Gun Jinn (Probably) A while ago I saw a picture (as seen above) of a Photoshop-ed A-10 made to look like a X-Wing. And, seeing that May The 4th is coming up, I thought it would be cool to make a kit card from…

Audient Evo 4 underdesk mount

I didn't like the way the Evo4 looks if it is placed on the desk top in the intended way. Also it is hard to route the cables and to convieniently read and manipulate the controls in this orientation. So i banned it from the top of the…

Apple TV 5th Gen Remote Holder for Under Table or Wall Mount

Overview Hi everyone! This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I…

A-10 Thunderbolt II scale 1-72

NOTICE: I realized after uploading that this needs to be flipped to have the GAU-8 on the correct (left) side. Remixed from MutherFluffer @MutherFluffr_3251745 design. https://www.printables.com/model/1309217-a-10-thunderbolt-ii also…

Bicycle airtag mount under bottle

The holder for the airtag is made of two parts without the need for screwing. Just insert the airtag and slide the parts on top of each other at a 60 degree angle, rotate and snap the latch. After that, just screw it under the bottle…

Underdesk Drawer with Hexagonic Design

An under-desk drawer with a rail that can be mounted under your desk with screws or adhesives. There are 6 holes with a diameter of 5 mm on the rail part for screws, or you can use adhesives if you prefer. The drawer body may need some…

Prusa MK3 - Smaller SideBoxes for some Tools - fits under bed in the back

This is an edited version of this Sidebox ( https://www.prusaprinters.org/prints/974-prusa-mk3-sideboxes-for-some-tools ). I needed a place to place some electronics, like a stepdown converter, on my MK3s. The original box was a bit long,…

Intel NUC Wallmount/Under Desk Full Harness Version

A variation or original minimal design.

Tyrants of the Underdark (2021) Board Game Token Inserts

These are plastic inserts for your cardboard tokens, compatible with the 2021 version of Tyrants of the Underdark.

Monument to Founders of Kyiv

Monument to Founders of Kyiv Figures Depicted The legendary siblings: Kyi , Shchek , Khoryv , and their sister Lybid . (Kyiv is named after the eldest brother, Kyi). Official Name Pamiatnyi znak na chest zasnuvannia mista Kyieva…

Stubby Handle Siren Thunderbolt

This is a Small siren Thunderbolt it is designed for kids, which is why it has rounded corners and a small handle it gives the print a bit more durability than some of the other ones I have found online. The handle prints with supports,…

Urban Arrow Under Seat AirTag Holder

This is my first ever 3D printing model and I am rather proud. I noticed the other AirTag holder on Printables was far too discoverable for my liking. My previous solution to duct tape an AirTag under the seat eventually failed and the…

AK-47 underbarrel picatinny rail

3 parts that are held together with M3 screws you will need 4x M3x20 and 4x M3x12 and 4x M3 nuts

Parametric Laptop Wall/Under Counter Mount (Fusion 360)

The size can be modified in Fusion 360. It's suitable for laptops and anything else that's flat like a laptop.

Floating Nintendo Switch Skadis Holder | No Supports | Under 20g Filament

No need for Supports. I printed it with PLA. I would recommend to print the Twist-Clips with PETG.

Focusrite Clarett/+ 2Pre - Interface Under Desk Mount

This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…

Thunderbolt Logos 3D

These are just thunderbolt logos I needed for a print project (I will add the link to this project here when it is finished - in a couple of days). I created the logos from 2D pictures found by google. Print what ever material you like.…

powertool safety switch includes mmu gcode and still under limit with purge towers

Power tool safety switch lock Lost a couple of the original ones and was just swapping as i needed the tools. Decided to just make my own. I used PETG .4 nozzle .15 resolution suggested (ok with .2) Supports in file (painted on) Brim not…

UnderBin Dividers

This will let you use the mini-bins from @RobertONeill_540978, while still organizing the space underneath. These should fit snuggly into the bins from Dewalt's Toughsystem organizers. There is a separate model if you want to split the…

Furniture Lift - to allow roomba to get under the couch

Parametric Furniture Lifter - for roomba - no more dust rabbits Was always annoyed by the roomba not doing under teh furniture and having to do that by hand.. so i made a quick sketch in fusion 360 to make stands for the legs. and it…

Heewing T1 Undercarriage and Skis

Made two mount plates, one flat and one with slots for landing skids/wheels. The landing legs have 2.5mm hole which I tap to M3 thread and use a M3x8mm screw. A rubber band is used to angle the skids up ~15 degrees during flight. The rear…

USB mount under Prusa Enclosure

Needed a way to hold two USB extension cables… One is from the printer's memory stick slot, the other is from the computer. I don't like plugging the USB stick in and out of the printer directly (so as not to wear out the port) it's much…

Intel NUC Wallmount/Under Desk Mount Micro

Gcode included for PLA 0.4mm. If you print correct way up no supports needed.

VIFLY/other strobe mount for DJI/other drones (under 1g for 250g drone laws)

A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…

Fridge Under-Shelf Applesauce Cup Organizer

Compatible with fridge shelves between 330mm and 343mm deep with a front edge height of up to 10mm and a rear edge height of up to 15.5mm. This was designed for a Samsung Bespoke counter-depth top fridge shelf. This model is designed to…

Samsung Monitor PSU Holder Underdesk

Simple brackets for mounting an external monitor PSU to the wall or under a desk. The PSU this was modelled for came with two of my monitors, both Samsung c24f396fhr (24inch curved 1080p displays). This is designed for Samsung…

Wall art: Deep roots under the rising Sun

At first print with transparent yellow filament, then switch on some black just like on my picture.

Drill or drive pack under shelf mount compatible with Ryobi

A simple mount to keep your Ryobi drill or drive packs under a shelf. Use two business cards as a spacer between one mount and the Ryobi pack to get the spacing right before screwing into your shelf.

Dell docking station UD22 mount under table

Under table cradle for Dell WD15 docking station - we needed a way to mount it near the cable opening in the meeting room so that the cable is maximally long. This screws in right beside it with easy access to the plugs for cables. Use…

Original Prusa Enclosure (OPE) - Cable Managemet Clips for Under the Enclosure

Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside. This clip allows you to place the…

Undershelf mini drawer

I have an Ikea Billy shelf for bedside table, which is very convenient, but always crowded with little things that don't like dust, such as ear plugs. Here is a solution that can easily be resized, a smal drawer that can be mounted…

Cak Digit TS3+ Underdesk Mount

This is a mount you can print that will attach your Cal Digit TS3+ and power brick under you desk. Designed for for us with these screws , #6 x 5/8" pan head w/ #2 phillips/#1sq.

Dyson attachment under-shelf or ceiling mount

Simple 1 screw mount for Dyson attachments, designed to be mounted on a horizontal surface like under a shelf or on a ceiling. Works with both standard and powered attachments.

Elektron Digitakt PSU - Under desk mount

Custom-designed under desk PSU mount for Elektron Digitakt, allowing you to securely attach your Digitakt power supply unit (PSU) underneath your desk. Settings: layer height: 0.2mm Infill: above 15% Required: x2 screws of proper length

Over / Under Extrude Cube

This model is to test if the extruder settings are causing over or under extrusion. Walls are 0.4mm After printing measure the walls. Note: A tolerance of (±0.02mm - ±0.05mm) is normal. Less than 0.4 outside of tolerance, might indicate…

Center finder for wood under 3 inches in width

Center finder for wood that is 3 inches (76.2 mm) or less. you may need to adjust center hole for your pencil diameter. This is tuned to my mechanicl pencil diameter.

PS5 Digital Stand Under desk catagory

Printed with PLA Creality wood filament, the print came out great. I haven’t tested it yet, but I noticed a shortage of not massive PS5 under-desk mounts. Please test how strong it is before mounting and dont blame me if it breaks!

Airtag Mount (Underneath Seat) angle 28 degrees

I had printed Luke Earl's airtag mount for my CUBE sadly it didn't fit my saddle, I simply used the .f3d file to replace the original 40 degree angle with a 28 degree angle. For more strength and a better resistance I printed it in ASA…

Under Desk Astro Mixamp Pro Mount

Under desk mount for astro mixamp pro. Mounting holes are 1/8", overall width is 7.5". Used supports under mounting tabs

Dice Tower - Building Under Construction

Dice Tower - Building Under Construction The Megalopolis is a dangerous place. There's always some sort of villainy afoot, and it often leads to disastrous conclusions. Buildings collapse, highways get blown up by strung out aliens,…

Steinberg UR22 MK II microphone amplifier bracket under desk mount

This is for the the Steinberg The inner width is 160mm the height is 50mm perimeter:2 infill:15% There are holes for screws to mount it - which i did and would recommed. Normally i use double sided tape - which has sometimes problems…

Command Strip(s) Underware channel compatable

Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…

PC 120mm and 140mm fan desk / under desk mount

The fan mount was designed to solve the issue of insufficient air conditioning and the need for cooling on hot days. Its minimalist design is all that's necessary for the fan to operate effectively. To secure the fan, you can use either…

Laptop Under Desk Holder

Simple laptop holder for Asus Rog (model number will be updated)

JetKVM Under Desk Mount (Remix - Slim & added Cooling)

This remix has a reduced the profile (X Axis) so it has a slimmer/narrower profile , it will fit into tighter spots, and corners. I have moved the mount holes to centre of the model, using 3.5x25 screws . And the bracket is good for a…

Kanto YU Remote under desk mount

Simple solution to remove the rare used Remote from the desk :)

Wall art: Deep roots under the sky

Colours: the first: transparent light blue the second: transparent yellow or orange the third: light green the last: black or: the first: transparent yellow the second: transparent red or orange the third: dark green the last: black

Wilfa Svart Uniform - under-grinder coffee coaster

This coaster is designed to catch any stray grounds that fall from your coffee grinder, keeping your countertop neat and easy to clean. It includes seven holes for attaching standard furniture bumpers (9mm - example ) or slip-resistant…

Steam Controller (2026) Magnetic Under Desk Mount

Magnetic under desk mount for the 2026 Steam Controller. The charging / wireless puck is designed to fit into the mount allowing for seamless charging, and a satisfying magnetic retention. Organic supports are recommended for the top…

Fluke 113 Under desk support

Because i have not many place on my electronic desk, i decide to create a support for my Fluke multimeter on the top.

GOCIO E-Bike under seat battery holder plate

First steps in practical 3D modeling! I designed this part to fix a friend’s bike. The original plastic piece (shown in the photos) broke and was loose. This is the best of all humanly possible "worst attempts" to recreate the original—it…

Yubikey Under-Desk Mount

This version was redesigned from scratch to better support a commonly available USB-C extension cable in the US ( https://www.amazon.com/dp/B073XKK9MZ ). The main cable channel has been resized to properly fit that style of cable very…

Under Mounted Phone Holder / Cradle

The design is intended to fit as many phone like devices as I could within the area I had available. Fits devices up to 250mm long & 88mm wide. Though you can put up to 117mm devices if you don't mind the steeper angle having an increased…

Helicopter underslung

If you are a helicopter underslung instructor or work with slingloads, this is the sign for you.

Honda ATV Choke cable Insertable Nut (Under choke puller on handlebar)

Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…

PicoScope 2000 series and under desk mount

This design leaves the bottom of the scope as well as some millimeters at the top open, so that airflow can help cool it.

Hook under shelf

Easy to install under the shelf between the shelf and the wall. You can that hang stuff under the shelf. No drilling or screwing. I recommend printing with 0.2mm layer height and 5 or more perimeters. Printed from ASA this way supports…

Podložka pod kolečka rozkládacího gauče / Pad under the sofa bed wheels

Potřeboval jsem zvýšit rozkládací gauč, aby se mi pod ním nezasekával robotický vysavač / I needed to raise my sofa bed so that my robot vacuum cleaner wouldn't get stuck under it

Supportless model Holder for Totebo underneath Svensas

I've created a remix of Sumi's model to make it better printable. I also removed the ridge on both edges because... time

Royal Enfield Scram 411 Hidden AirTag Holder – Under Passenger Seat

Description This is a two-piece hidden AirTag holder designed specifically for the Royal Enfield Scram 411 . It is made to fit behind the rear side plastic panel, under the passenger seat, keeping the AirTag completely hidden from normal…

Underware - The Ultimate Cable Management Solution

Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…

Under Desk Drawers

Alright this project is growing.. needs a new description. Above Desk Drawer versions now released! Under Desk Bin / Trash Can now released! Under Desk Headphone Holder now released! As a thank you to the success and support that this…

MODULITH 185 Under-Table Starter Kit

Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…

Under Desk Drawer with Double Travel Stops

Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)

Underground corner tunnel for aquarium/ fish tank

Burry the tunnel under your aquarium soil or gravel and let your fish explore it. All the edges are rounded to protect you fishes' fins. With dimensions of 140mm x 140mm and a 37mm roof height, (50mm overall height, including the…

Under Desk Cable Management

Parts for cable management under a desk. They are screwd to the desk and use tie wraps to fasten the cables. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: Doesn't Matter Supports: No Infill: 20 Filament: Any Brand…

Headphone Hanger - Under Desk w/ Cable Management

This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for…

Under Desk Drawer 2.0

Under Desk Drawer 2.0 options: 4 drawer bottoms. Hex (Honeycomb), gridfinity, gridfinity+hex or solid bottom 4 different handle types 2 types of keepers, inside drawer or back of drawer mechanism Optional divider insert I really like the…

Fish tank underground hiding cave

I MADE A REMIX WITH A FLOOR AND A LIP 🔗 This fish tank accessory creates a space under your tank's soil for your pets to hide where you continue to watch them as they play and feed. Dimensions: 15 x 15 x 10 cm. 3mm thick walls Materials:…

Under Desk Cable Holder

Simply mount the holder using a 4 mm screw and slide your cables through the opening. It accommodates cables up to 11 mm in diameter , keeping them neatly in place and helping prevent cable clutter. Features Suitable for cables up to 11…

Floppy Flounder - Articulated Flexi Fish

Update June 29, 2025: Added v3 models in hopes to resolve an issue with the tail breaking off too easily. Update August 8, 2024: Added Detailed_Eyes.stl for those who wish to print the detailed eyes separately. These eyes will fit in…

Under-Desk Cable Holder

This is to be mounted on the underside of your desk to keep your cables well organized. It´s designed so you can add or remove cables on the fly. The opening should fit most cables up to a 12m HDMI Cable i tested it on, haha. Print as…

Under Desk Drawer - higher

higher

Under Desk Laptop holder

Under desk laptop holder sizes from 20mm to 40mm fits almost any laptop Screws Filament Grippers

Under Desk Drawer

Info I designed this drawer so that it perfectly fits on my Prusa MK3S+. If it doesn't fit on your printer you can just scale it down (or up). It has a smooth sliding rail to give you perfect access to all your stuff currently lying…

Under Desk Drawer

Needed bigger under desk drawers with no handles. Too many charging cables to store :) They are pretty sturdy, reasonably deep at 45mm and with the handle on the base of the drawer. Just screw the frame into the desk using the four pre…

Underware for openGrid - Manage your cables lite-ly

This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…

Under-desk headphone holder

Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls

A-10 Thunderbolt kit card

can be printed together the model needs to be glued together or separately in other colours the A-10 is very realistic Print in place kit card , Assembly required need to use a support

Thunder or Toothless

I got a model of Toothless How to Train Your Dragon and used the new paint on color change of the Prusa slicer to turn it into Thunder of the new show Dragons: The Nine Realm s. If you prefer Toothless just remove all the colors or just…

Thunderjaw from Horizon Zero Dawn

The Thunderjaw from Horizon Zero Dawn modeled with CATIA V5.

#Gridfinity Under-Desk Drawer

Drawer with a 4x4 gridfinity baseplate. Added source files, which are mostly parametric. Keep your most used gridfinity storage blocks under your desk for instant grabification!

MODULITH 270 Under-Table Starter Kit

Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…

Laptop under desk dock

Introduction This is an under-desk laptop dock with an integrated ejection mechanism. Slide your laptop on the rails and plug it automatically to a Thunderbolt cable for power delivery and screen and peripheral connections. And when you…

Under-Desk Laptop & Tablet Mount

Under-Desk Laptop & Tablet Mount A clean mounting solution that screws onto the underside of your desk to hold a laptop or tablet. Simple to print, with no extra hardware required beyond standard screws. I used 4 M5 screws to secure it to…

Sans Mask from Undertale

Seeing this epic mask fills you with determination. This is a full scale mask of Sans from the video game Undertale. It is printed in multiple pieces which will need to be glued or melted together. The mask was scaled to my head, which is…

PS5 Under Desk Mount (Disc Version).

There are few ways to mount the PS5 under the desk but since I have a 3D printer I decided to make my own version. Two brackets with slots for self adhesive tape for easier assembly. Printing Print the parts in the suggested orientation.…

MMU Under Shelf Auto Rewind Spool Holders

Inspired by Vincent Groenhuis Auto Rewind Spool https://www.thingiverse.com/thing:3200204 I decided I needed to make under the shelf / Hanging Spool Holders for these. This uses the metal rods and 608 bearings from the Prusa MMU spool…

Hanging Headphone Holder (under desk mount)

I needed to mount headphones to the underside of my desk, so I remixed my old headphone hanger design to accommodate this new mounting requirement. This model also contains infill modifiers around the screw/bolt holes to create a solid…