1558 modeli
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
I wasn't satisfied with the default Honeycomb Storage Wall inserts; they're press-fits, so the tolerances need to match perfectly. This is a problem when printing with larger nozzles/extrusion widths (which I do frequently for speed) or…
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw . You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping…
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Modified @MadeWithLayers ' design to fit the MK4(S). It screws into the Nextruder and fits your typical 4 mm PTFE tube. By the nature of reverse bowden, it is not necessary to use a quick connector, the tube will get pulled in by the…
This is an attachment for the original Prusa Mini spool holder which allows adding a PC4 M10 quick release adapter for a common PTFE tube. Primarily I use this for a reverse bowden setup on my MK3. Printing: any solid filament 0.2mm layer…
Universal holder for two cell phones. Ideal for placing above a power outlet while charging. Simple and flat design with a recess on the back for mounting with double-sided adhesive tape (e.g.: https://amzn.to/3Zt05iO). Two versions are…
Scale 57 x 74 x 92mm Overseas version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for foreign viewers. The main difference between the two mascots is the cloth around the neck: Japan viewers have scarves while Overseas don…
Aufnahme für Küchenwaage unterm Regal/Schrank
Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…
Wife's Enclave upper storage compartment latch broke down, I 3D scanned the pieces and recreated in F360. I printed with .4 nozzle at pretty much default settings. I added a handful of small paint-on supports to keep the rails from…
Bike Hook for Cargo Bikes (Inspired Design) This is a 3D-printable S-shaped hook designed to hold small bikes or balance bikes on the outside of a cargo bike. The design is inspired by commercially available cargo bike holders , but fully…
Used PETG. Print with (3) perimeters. Standard infill. High end of PETG temps to ensure solid layer adhesion. Press your keyswitch down and the top will release. This design is much more sturdy and less prone to breaking vs the original…
Modified the Bear Upgrade 2.1 optional reverse bowden to fit the original M5 fitting (PC4-M5) used by Prusa for the MMU2 cover. The vslot mount is available in two versions: angled or normal. I bought the fittings here:…
That is my first prototype of a kinetic sculpture/mobile… with a 90mm Earth, 70mm Moon and either a 70mm Venus, Mars or Pluto. That results in a scale of 1 : 141.733.333,3 cm for the Earth 1 : 49.631.428,6 cm for the Moon (of Earth) 1 :…
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
Assembly video Community on discord https://discord.gg/ rWp2CKg
This is a simple head for a Masters of the Universe 2020 Figurine which I designed for a friend of my dad. Due to this, I do not know what the name of the character is but it looks pretty cool. I already uploaded it to Thingiverse, so do…
Inlay is design by myself The monkeys comes from thingiverse from Cathy29 make sure the inlay is fitting - measure your box in the imags you can see my slicer settings (ground layer 0 - wall 1) works for the green and the pink version of…
This adaptor replaces the 8*7.5mm PTFE tube clamped into Prusa's Filament Guide Addon for the standard Prusa Spool Holder. It provides a square tapered hole that 4mm PTFE tube can be pressed into for a Reverse Bowden setup. The PTFE tube…
Příčný držák ke stanu Camper. https://www.printables.com/cs/model/819878-rc-110-scale-roof-tent-stresni-stan-camper
EN: The adapter can be used to rotate the feed direction by 180 degrees. Each arm can be extended up to approx. 8 cm. The following arameters were used for printing: - PETG (silver satin, iron gray) - 0.4 mm nozzle - layer height 0,2 mm -…
Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963
100x160mm signs, with art of a winged imp, reading "(I am) or (Beware) the Imp of the Perverse" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…
Orco from He-man and the Masters of the Universe.
In the Files tab use "Ctrl F" to find the files you need. My takes on the creatures from Monsters of the Multiverse are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the…
This model was created by Amao chan over on thingyverse. Check out the original creator: https://www.thingiverse.com/amaochan or the original post: https://www.thingiverse.com/thing:6086143 This is just a reupload!
Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84
The transverse flute is thought to be one of the oldest musical instruments. It was first made of bone or wood. Today, the simple models are usually made of plastic, and we can make them with a 3D printer. Although this is a simple flute,…
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…
Keyrings available here: https://s.click.aliexpress.com/e/_DmRrLOZ
I really liked nobodyinperson 's idea.. I didn't like that the notches were visible and decided to make my own remix. CONCEPT The concept is as follows (for those who are seeing this for the first time): The insert is slotted in 6 places…
I've seen this Spiderman PS4 faceshell on thingiverse and I wasn't sure if HappyMoon had uploaded it to Printables yet or not so I figured I would share it with this community in case anyone hadn't seen it. It looks like an awesome…
I know this is gonna be hella useful for all the spider-man cosplay groups! If im completely honest… 50%of the work was pressing the spacebar real quick to go trough all the trailers frame by frame whenever this was on screen I made this…
Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.
This is my Inverse Kinematic Paint Mixer, as seen at https://youtu.be/FnnN7typFP0 These printed parts combined with the following non-printable parts will make an automated mixing station for your small paint bottles (up to 45mm…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. Two sliding dog clutches are provided on the main shaft. Gear ratios: 1.38, 1.00, 0.78, reverse 1.86 and…
Smaller scale heart box from- Jewelry Box with dividers (http://www.thingiverse.com/thing:3304456) Scaled down to approx 130mm X 130mm
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
Quick model up I did of the Eye of the Universe symbol from the Outer Wilds video game. I found an image online, traced in inventor, and then added the disc behind to hold together all the disconnected sections. The disc is not centered…
Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
Die universelle Arduino Halterung wurde Ursprünglich für das Robocar entwickelt und bietet die Vorteile von einer einfachen Montage und auswechseln des Microcontrollers. Die Halterung wurd passend für folgende Modelle entwickelt: Arduino…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
These brackets allow you to use a reverse Bowden tube to stop the filament from pulling on the extruder and giving inconsistent extrusion. This increased print quality significantly for me. Designed to be used with either my Neptune 4…
holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer
Ender 3 V3 SE - Z axis reverse Bowden mount used in combination with https://www.printables.com/model/602032-ender-3-v3-se-ender-3-se-reverse-bowden-adapter and a spool holder to move the spool from the top of the printer to the right…
💙 Enjoying the Freebies? I love bringing these concepts to life and sharing them with you. If you'd like to support the channel or sell physical prints of my designs, check out the links below: 🔓 Commercial License: […
Stormtroppers, Darth Vader, The Mandalorian and R2D2 wall decorations. Easy print. Interested in more themes? Subscribe to the club for additional designs inspired by gothic, nature, and fantasy aesthetics, from mythical creatures to…
This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…
If you like this model check my other stuff, check out my www.patreon.com/wekster or my youtube channel www.youtube.com/wekster
The Staff of Ra (and its headpiece) might be the worthless piece that Indy proclaimed it to be to Marion, but it still makes a great prop! The original model was posted on Thingiverse by youngs66 back in 2013. The single-sided pieces for…
I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…
English The original model from Thingiverse needs supports, but they are difficult to remove (at least without destroying the model :-)). I have modified the model so that it rests completely on the print bed, so no supports are needed.…
Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only
Turn your everyday card into the ultimate reverse card 😄 This two-piece credit card case is designed to fit a standard bank/ID card while keeping the iconic reverse-card look front and center. The raised border, oval, arrows, and corner…
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
Check the Screwiverse Remixes for other attachments designed for these threaded inserts. These don't fit when the original HSW base/hollow inserts were printed highly overextruded. This is actually something I'd like them to do (that's…
The short drawer should fit underneath removable shelves, allowing for more spaces to be used with the drawers. Any infill, any layer height, supports required.
HO Scale Transformer Station by kabrumble on Thingiverse https://www.thingiverse.com/thing:5089946
Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15%…
HI ! I added a reverse option. I havent printed yet, just sharing it. I hope you like it! You will have to add an extra hole for the lifting rod, and will need an extra servo too. After I printed it, I can find the exact position for the…
Lässt sich mit der Picatinny-Halterung nach unten mit etwas Support einwandfrei drucken. Update 14.02.2024: Der Griff ist als Anbau an eine Adderini zu schwach. Beim Spannen der Adderini über den Griff ist die Picatinny Aufnahme des…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Update 13.04.2023 -Added left side version with correct thread. Reverse bowden set for Prusa i3 MK3S(+). Includes modified OEM Prusa i3 MK3S+ top right z-mount and fs-cover with additional mounting points for PC4-M10 quick fitting…
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup. Note that one of the parts listed is an M10-0.75 x 5mm heat set…
Makes use of a voron style spool holder (Which are super awesome) and attaches to 2020 extrusion. Has an integrated opening for a reverse bowden tube that sits close to the spool, so no overt unwinding. It works really well. The spool…
My sister in law asked for one, so i used vr to make one! The Library of Dreams holds many if not all things, any requests will be met with attempts, for the most part!
A cover for this generic backup camera so it doesn't look as dangly. Affix with double sided tape. The back of this cover is open so it can be installed after the camera. Category: Camera
it reduces shaking of the spool while printing fast infill mounts to the top horizontal extrusion i recommend printing it using 3 walls as it may creep over time requires: 1x m3x10 screw 1x m3 tnut 1x appropriate length bowden tube (for…
Hello everyone :) Attention DC Universe fans . I have designed a very cool string art stand with BATMAN LOGO for you. Both the stand and the Batman string art are very easy to print and use very little filament. The principle behind it:…
Replica of Rose Quartz's sword from the animated show Steven Universe. The sword blade is reinforced with a threaded steel rod during assembly. Photos show the sword after gluing, sanding, and painting. We have a video covering the entire…
This is the standing version of the spool holder, I have already uploaded a hanging version , some parts are the same as the other spool holder so you can reuse them if you change your setup. Introduction: After some experience with my…
Print with 3 walls and 18% gyroid infill. Requires: 2x M6x12 2x M6 3030 T-Nut 1x PC4-01
Das passende Filament findet Ihr unter https://www.3d-printiverse-shop.com/
Edit: the original model has updated to 3.1 which now includes a similar rubber band option, therefore just use the original no need to use this remix, unless it did not work well for you. (e.g. you have a longer rubber band) This version…
Miles Morales into the spider verse inspired face shell Enjoy Category: 3D Printing
Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
A case for the Adafruit ESP32-S2 Reverse TFT Feather. Uses four to six m2x10 screws. https://www.adafruit.com/product/5345 Also included a battery case. https://www.adafruit.com/product/3898 I've updated both back plates to have better…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
BESCHREIBUNG in Deutsch und Englisch DESCRIPTION in German and English Schiffe versenken Spiele den Klassiker zuhause oder unterwegs. Mit der praktischen Aufbewahrungsbox kannst du es überall hin mitnehmen. Drucke das Spiel in den Farben…
You can give it to your friend and tell them to tighten it, but when they start turning it right, it will just fall off of the screw.
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
I needed a cake topper for my wedding, but there was nothing that I could buy that really seemed like it suited us so as a self-proclaimed maker I thought, "I'll just make my own". My wife and I wore some Chuck Taylors for our wedding…
Print a piece of Space History Size : 228.6mm x 152.4mm x 1.4mm (Real Size) The Pioneer plaques are a pair of gold-anodized aluminum plaques that were placed on board the 1972 Pioneer 10 and 1973 Pioneer 11 spacecraft, featuring a…
A quick and dirty miniature approximation of an Ooni Koda pizza oven and pizza peel. My 7-year old daughter requested this, to go with her MGA Miniverse Make It Mini kitchen playset . The scale is appropriate for the epoxy-resin pizza kit…
UBBI adapter to enable reverse bowden capability on stock neptune 4 shroud Features: - Thickened to add more rigidity - Twist locking mechanism with audible snap - Prevents filament tugging and uneven extrusion 🤩 Do you like the design?…
Just another combadge. This time an alternate reality version from Star Trek: The Next Generation. Features separate rank bars so you can print them in different colors. Update December 15 2023 - Made the overall badge thicker to bring it…
🖤 Modernes Wandregal – Versetzte Ablageflächen
Original description from Thingiverse model: I printed mrclauds Motorbike Cruise Control but it never stayed enough to go over bumps and whatnot, I remixed it into this. It allows you to put rubberbands on the front and backside, a nice…
A set of (reverse) Bowden tube mounts for the MK3 series of printers. The extruder side clips over the extruder filament inlet, the frame side requires swapping one of the M3 Z-rod top mount screws for a longer one. This creates a stud…
