Liczymy pasujące modele…
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parametric Model Maker: I’ve created a parametric version of this model using the Parametric Model Maker, offering an even simpler way to customise the length to your needs without any 3D editing software. Give it a try here:…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I don't like to throw all of my utensils into one big container, so I've designed this internal divider for the Ikea ORDNING utensils holder. It's designed to snap into place (the upper part has a lip that grips the edge). There's also a…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
A tamper evident, one-time use lock. Once locked, it has to be destroyed, which is evidently visible. I remixed this model so the overhangs print better and tweaked some tolerances.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This is a 3D printable 1/4" to 3/8" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 3/8" to 1/4” adapter here. Important Update: I’ve created a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3D printable 3/8" to 1/4" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 1/4” to 3/8" adapter here. Important Update: I’ve created a…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1.PRINT IT 2.SNAP IT 3.ROTATE IT 4.PRINT ANYTHING BETTER Stop squeaky noises, mesh bed leveling errors, Z wobble, Z axis errors on the Prusa mini+. No tools needed to install this printer upgrade. It might seem useless for some, but I…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
A 40° wedge for the Eufy E340 dual video doorbell, featuring room for wiring. It may also work with other Eufy doorbells if the backplate form factor is the same. The wedge has separate wall and backplate attachment points: a pair of…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created these simple dividers to separate sections of 3-ring binders. They've worked for me for a few years as both dividers and as place-markers. Printing instructions Nothing special - just slice it and print it. I used solid 100%…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
German version Für Schubladen des Sideboards im Büro brauchte ich eine Unterteilung, wollte aber die Schubladen nicht beschädigen - nicht schrauben, nicht leimen, nicht dübeln… somit habe ich Halter konstruiert, welche mit doppelseitigem…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
A tabletop stand for the 7 inch models of the blackmagic video assist monitors, both 3G and 12G versions
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
Monkey Skull Chalice. HOW TO VID.
Wydruk około 14,90 €–18,22 € nettoWstępna wycena jednego wariantu
My family does a lot of video calls with grandparents and the kids faces are always in the bottom of the frame and the angle is just terrible. The phone stand is a must for long calls so just holding it won't do. This stand might not be…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description An affordable Arduino Turntable designed for Time lapse photography. It can also be used for Photogrammetry or Video by adjusting the code. By default it triggers the camera then turns a predetermined number of steps then…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
3D-Printable Microphone Stand for Shure SM7B, SM7dB or many others. Elevate your audio setup with this custom-designed, 3D-printable microphone stand, specifically tailored for the Shure SM7B and SM7dB microphones. Whether you’re…
Wydruk około 4,95 €–6,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What is Print in Place PLUS ? It's adding filament change stops to insert parts . Filament changes are set to 13.4 & 69.4 (for .30mm layers 69.5 ) Do not change color, instead just add tires and restart with same color. Tires will be…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Designed as a stand for the awesome XGIMI Elfin Portable Videoprojector whose size is 19.2 x 19.4 x 4.8 centimeters and weights less than 1kg, but the stand can surely bear heavier devices, just not sure how heavier. [edit] I added the…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
What is Print in Place PLUS ? It's adding filament change stops to insert parts . Filament changes are set to 13.4, 29.6, 53.0, & 69.4 (for .30mm layers 69.5 ) Do not change color, instead just add tires and restart with same color. Tires…
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
You will definitely be on Santa's "nice" list with this Christmas tree ornament. A unique gift for the gamer in your life, whether it's for your significant other, a child, or an entire household of gamers, this ornament is sure to be a…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Is it a quick print? Yes! Is it solid enough to work? Also yes with the good parameters! Is it a very low cost accesory that will save your saw and improve your safety? Still yes! Check the short tree falling video below to see! I didn't…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print two (or more) colored videogame stand. For multi color just make a filament change at 2.2 and 22.2. with 0.2 layer hight. Then you can print the direct with the stand. No Support needed.
Wydruk około 6,12 €–7,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When need for manual rewind of tape
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
A tool for installing SDI Video cables with BNC connectors in tight spaces like on the back side of video equipment. The tool fits the standard Amphenol BNC connector and has a slot for the cable to go. Printed in Polymaker PolyLite PLA…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2 minis and didnt want to disassemble it to…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Furthermore, explore my alternative model: https://www.printables.com/model/638685-divider-diy-storage Suggested print settings: No supports are needed but follow the suggested print orientation for ideal results. "Honeycomb Drawer…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
The 15 degree shim that comes with the Eufy 2k wired video doorbell isn't enough to get a good view at a right angle from the wall the doorbell is mounted on. This 35 degree shim gives a perfect angled view. Print instructions Since this…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I ordered two video doorbells for my front and back doors. As I was trying to install the batteries for the first time, the clip that held firmly in place the plate that covered the batteries broke when trying to remove it. I was refunded…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This extension mount helps get your Ring Wired Doorbell Pro (Video Doorbell Pro 2) into the right position when your door frame is further back than the adjacent siding. By bringing the doorbell flush with the siding, you'll get a much…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keep proprietary files, embarrassing diary entries, and personal documents safe by putting them on an encrypted micro SD card. The tamper-evident design lets you feel sure nobody has attempted to access your files without your knowledge.…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Here are several different kinds of parts organizer drawer dividers. They're listed as Width x Height (in mm) to make it easy to find the ones you need. They fit a variety of manufacturer's bins, including Akro Mills, Stanley, Craftsman,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Keep your fridge tidy with this simple storage divider! Designed to separate items like bottles, sauces, snacks, or leftovers on fridge shelves. just print and slot it into place, no tools needed, and works with most fridges but designed…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
wing divider require 4 M4 washers and 2 M4x20mm screws and nuts (can also use these thumbscrews https://www.printables.com/model/275432-thumbscrew) supports needed for wing divider tips
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
This is meant to connect the divider panels in the original model. The length is not long enough for a typical bag so, instead, I printed three panels and four rods. The middle panel has a rod inserted half way from both sides. It's…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This will let you use the mini-bins from @RobertONeill_540978, while still organizing the space underneath. These should fit snuggly into the bins from Dewalt's Toughsystem organizers. There is a separate model if you want to split the…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bullet journal template has bullet markers (17.5mm from edge) and common shapes used for marking notes and organizing your journal pages. It also has convenient markings dividing a page into a number of evenly spaced rows or columns.…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sink rack to hold you spunge and accessories on a split sink. The space between the pockets is about 1.6 inches. Printing Print upside down. No supports required at 0.2 layer height. Infill and wall at your discretion. Enjoy! And If you…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
This sign can be used to comply with regulations when using CCTV in Denmark. Print is sliced with Prusaslicer with color change at layer 12. Can be mounted with M3 screws. This sign is made by the Customizable Warning Sign script by Stone…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple, lightweight clip-on shelf divider for some 5mm glass shelves. Based on the design of the wire ones you can get from The Container Store, but I didn't want to try the metal on glass shelves. Created in OnShape; there's a larger…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Pen case divider Customizable - Muji pen case divider Customizable version Included parametric Fusion 360 project with easy to edit parameters: add your name or logo to make it yours! MUJI pen case version I've also included a version…
Wydruk około 2,59 €–3,16 € nettoWstępna wycena jednego wariantu
We in Europe do have some sort of a Dollar Store… called Action they got cheap stuff but sometimes they also dump real brands for cheap. I needed to organize some Nozzles, Screws, Gears, and other 3D Printer parts. So I went to the Action…
Wydruk około 5,41 €–6,61 € nettoWstępna wycena jednego wariantu
This light needs articulated mount to be mounted on a light stand – https://www.prusaprinters.org/prints/75428-articulated-mount-for-light-stand-bracket All of the details in a blog post –…
Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu
Designed to fit inside of the 70mm tall x 27mm diameter pill bottles. The divider lets you keep a small supply of pills, with 7 day labeled compartments.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
2 pcs hammer divider fits usg toolbox
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thanks to "Triple G Workshop" for the great shelf stopper. Instead of having to create one myself, I was able to save a lot of time by modifying the existing model. By adapting it to a wire spacing of 30 mm in width and 18.5 cm in height,…
Wydruk około 2,26 €–2,77 € nettoWstępna wycena jednego wariantu
Ce support de vide-poche est spécialement conçu pour s'adapter parfaitement à la Volkswagen Golf 8, au-dessus de la zone de recharge à induction. Il permet de ranger facilement vos petits objets du quotidien, tels que clés, porte-monnaie,…
Wydruk około 4,70 €–5,74 € nettoWstępna wycena jednego wariantu
The divider is designed for a 200mm slot, but you can scale it in length for any other slot size :-) I printed it in 0.2mm layer height, thats sufficient for my use.
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
I needed a divider for the smaller and the bigger part of the fridge, that goods do not fall down. Added cutouts for better ventilation. Printed with PLA at 0.25mm Layer height and 0.4 nozzle.
Wydruk około 7,18 €–8,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a sticker divider for the generic nail polish racks you can buy off Amazon, AliExpress and etc.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This adapter is to be screwed to the PRUSA filament guide. Up to 5 materials can be inserted to make a manual filament change in case of missing the MMU3 upgrade for MK4. I used my old MMU2 Buffer to store the loop after pushing back the…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Large and small drawer dividers for 30- and 39-drawer cabinets. Fits these cabinet models: Craftsman CMST40730 and CMST40739 ArtBin 6830PC and 6839PC Stanley Tools STST40730 and STST40739 Black+Decker BDST40730FF and BDST40739FF FILES…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Organize your cards with style! Smaller size to fit an Ultimate Guard Boulder deck box, which makes it about the same size as a sleeved card, with the tab on top sticking up. Printed with color change in PLA
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Me compré un estabilizador roto, lo arreglé y le faltaba el trípode. Asi que diseñé uno y lo imprimí. Acá los videos Trípode: https://www.instagram.com/lucianociri/reel/C0r-UK9p5Ni/ Estabilizador:…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
Two sizes of cute skulls with women's bow. The model is printed with PLA using PETG supports, but you can use also supports from PLA. The bigger skull have hole 5,6mm (0,22in) The smaller skull have hole 3.5mm (0,13in) Specs: Supports are…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
The Ikea Uppdatera cutlery organizers have some quite long sections, which could be shortened for additional storage. Some sections have straight, some slanted walls. These dividers are used to restrict movement of stored cutlery when you…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
You can print with PLA any color Schwalbenschwanz-Konus Buchsen but by careful. It is possible to loose keys. You can adapt the flow rate in prusa slicer or scale the SSKB a bit bigger to produce pressingfriction. Please take a drop…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A divider for the cards in Colt Super Express that makes it easier to see if a cowboy is on top of the car. There are two versions, one of them has joints that connect the dividers to each other. Works with sleeved as well as unsleeved…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Divider for the game Aleph Null. Prevents the cards from being pushed into each other.
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Základní motivací bylo vytvořit na 3D tiskárně zábavnou, užitečnou, bezpečnou a praktickou pomůcku do výuky na ZŠ. Zároveň by tuto pomůcku měli zvládnout vymodelovat a vytisknout žáci osmých tříd. Na základě velké popularity her Roblox a…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
Shade Cover for Neewer Dimmable 5600K USB LED Video Light One of the lamps still outputs light even when powered down. Something has to be wrong with the switch. In the meantime, I created an insert that would act as a block for the lamp.…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tento tvar byl objeven v roce 2023 - https://arxiv.org/pdf/2303.10798.pdf Nepravidelná dlaždice pro stavebnici k pokrývání roviny. Aby bylo možné model mnohoúhelníku vytvořit, má tloušťku 2 mm, i když se jedná o rovinné útvary.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Záložky do knih na motivy foto-video techniky. Bookmarks based on photo-video techniques.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A simple sign that can be scaled larger. A larger sign may have more clearly defined lettering; however, this is dependent on your printer. PETG was used since this will be exposed to the weather. No supports are needed, and a color…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Obsbot makes some nice tech for taking and producing videos. One of those things is a video converter module. This item allows you to mount the Obsbot video converter to a microphone stand and is offset to allow the stand to be stowed…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like monitoring my 3D prints with Webcams (nozzle-cam) etc. I found this tiny webcam that has despite of its small size a high quality Sony video chip built in. I chose the 1080p 30fps model with autofocus.…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
OpenSCAD parametric divider for Mixit box. Spiral vase mode.
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Fits my Tooltray for Lathetop . Pressfit - if loose glue in place. See also additional Hexkeyholder
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in PLA at 25% infill for a work project Works with the original mounting plate, for a better finish and cable placement Product here for reference
Wydruk około 4,33 €–5,29 € nettoWstępna wycena jednego wariantu
Vytvořit a vytisknout funkční model fotbalového panáčka, který bude použitý pro hraní školního stolního fotbálku.
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
Case for video to VGA converter with glued labels of different inputs/outputs. The two parts are to be connected via bolts and nuts. There are also mounting adapters enabling the case to be screwed to some base plate. The labels are…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Základní motivací je vytvořit na 3D tiskárně zábavnou, užitečnou, bezpečnou a praktickou pomůcku do výuky na ZŠ. Zároveň by tuto pomůcku měli zvládnout vymodelovat a vytisknout žáci osmých tříd. Na základě velké popularity her Roblox a…
Wydruk około 2,56 €–3,12 € nettoWstępna wycena jednego wariantu
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Divided Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
This adjustable set of drawer dividers comes in two heights, 50mm and 70mm, and various lengths from 200 to 520mm. For one divider you have to print two "HxL_TWall.stl" and one "HxL_Connector.stl" file of the same height. The first number…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you can…
Print it and add O-Rings 15,8x3,1 Print Orientation with support for enforces only.
A modular drawer divider system that joins the esthetics of 3D printing and woodworking. 3D-Printed parts All printed parts can be customized to meet your dimensions with the parametric ModularDrawerDivider.f3d file in Fusion360.…
