514 modeli
The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
This highly realistic modular wall with columns is designed specifically for H0 scale (1:87) model railways and dioramas . The model is fully modular , allowing you to easily create straight or extended wall sections. It features separate…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Print your own 1:492 scale model of the legendary Concorde, the world’s first supersonic passenger jet. Capable of cruising at Mach 2.04, the Concorde could fly from New York to London in under 3.5 hours, cutting typical flight times in…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Designed for maximum realism , it is ideal for trackside scenes, stations, yards, depots, and urban or suburban areas on model railway layouts. The fence features: Accurate proportions based on real FS concrete fencing Clean details…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
In the Netherlands we have this saying: “You can't always roll a six". For when stuff isn't going as you wished. In dutch: “je kunt niet altijd zes gooien” So to prove that wrong I made this silly cube that has six indents on every…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
A demonstration model showing 3 different ways you can make your prints grippy - knurling, fuzzy skin, and contours. The model includes a 2nd part which you can use to define the area for the fuzzy skin. Download, print, and experiment…
Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu
This model represents a realistic H0 scale parking bollard / car park barrier , designed for use on model railway layouts, urban scenes, parking areas, streets and dioramas . The shape and proportions are inspired by common European…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Wolf Cola : Always Sunny in Philidelphia The Public Relations Nightmare.
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
Watery counters are a problem of your past! This super handy soap dish is a stylish addition to any sink or shower. It will also leave your counters, and your bar soap, bone-dry and ready to use. Leave it on the lip of your sink to allow…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
Another soap dish. Inspired by Chinise one. Let soap be always dry and avoid proliferation or bacteria.
Please click if you appreciate my work :) Fake dice always shows 6 Set the fill to 99-100% To always get 6 you have to develop a throwing technique. TIP: take a small nail in pliers, heat it up and insert it into 1 all the way. When it…
2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile Available in two versions: Blank M4 Treaded Suitable for: https://www.item24.com/en-il/profile-5-20x20-natural-37003#description All our designs are free to download and use.…
Meet Kapi, the king of laid-back vibes and quiet confidence. Whether he's hanging out on your shelf, Kapi brings peace wherever he goes. With his soft shape and zen attitude, he’s the kind of buddy that reminds you to take things slow and…
I didn't have room on mine to mount it up and down so I designed this sideways mount. It does not need any supports if printed in the orientation I have pictured.
A rigged Dice V3.0. Fully new Version with Sphere as Base Model, like a real Dice. 4 different versions: one without weight on a specific side (Rigged Dice V3.0 - hollow) one with a weight → so 6 gets rigged (Rigged Cube V3.0 - rigged)…
The original Kobra 3 duct did not properly cool the front and rear of the models, causing failures when we have overhangs or very pronounced angles in these parts. This is my first iteration of the original duct. A front outlet was added,…
PLA works good. For durable spring tension use PETG.
These are simple 20x20 cable raceways to clean up any kind of wiring project. They have holes for M3 screws to mount to to extrusions or you can use VHB tape to mount to a flat surface. I have .stls for 90mm, 110mm, 130mm, and 150mm. I've…
Small aviator for a gift at a model building show. At our exhibition I printed the planes with my Delta printer and gave them away to children. One template is with text and one without for your own text. The model is flat at the bottom…
Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.
SSD tray to replace the original UACC-SSD-Tray
These models can be assembled to create a model of the spinal cord and brain which can be used as a learning tool to understand the motor and sensory pathways between the brain and spinal cord. This model was designed as a physical…
With all of the public group events canceled, now's the time to explore the woods and parks and get in some Geocaching! I wanted to create a fast printing coin that I could leave behind at our finds with the actual Geocaching logo. I…
This decorative model at scale 1:32 is the famous Swiss Railways Crocodile locomotive born in 1919 for pulling freight trains through the Gotthard mountain. This CE 6/8 iii is the third serie built in 1925-1926 and numbered 14301-14318.…
This module is specifically designed for the QIDI BOX , the multi-filament system for QIDI printers. Its purpose is to keep your filament in top condition by preventing moisture from compromising print quality. The design features vented…
Spacers for IKEA wooden train railways. If you connect correct all railways parts you don't need this but sometimes you want to be creative and feels lack of these spacers =). P.S. You can also found other my wooden train designs here:…
I liked the light switch lock remixed by GALACTIC, which functioned as intended. But after printing and installing the lock the light switch somehow would randomly still get switched off. I remixed the design to always keep the light…
So if you ever saw the show "Its Always Sunny in Philadelphia" you'll remember the iconic episode "The Nightman Cometh ". Well, I got crazy and made 3D Printable D&D minis of The Gang in this plays' garb lol Thanks to my friends and…
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
3030 Connector 3Ways Corner Bracket _Profile M4 Thread Suitable for: Resize to adjust dimensions ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may not always fit the…
This model is compatible with the lego system.
Easy to make a funny and cute keychain inspired by a design from Ale Hop Store NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…
10MAY2019: Published my interpretation of a 1:32 (Gauge 1) Southern Railways Bulleid Coach. Some of the smaller, insignificant details, are excluded from the design, or simplified. It was my intention to create a design that shows the…
This model is compatible with the lego system.
I needed to store my angle grinders better and all the models for mounts I could find fit them flat against the wall, which takes up a lot of space that I didn't have, so I made some that fit sideways with the handle pointed out. There…
Whooo’s in love?Nice decoration that can be put wherever you desire. Follow their lead and let love take flight! PRINT IT BIGGER - PRINT IT BETTER The model I printed (look at the picture at the end) was just a test — you should print it…
NoWalls Magnetic Doors and Doorways (OpenLock/MagBall) ======================================================= Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE:* I have added two additional tile doorways. One is full…
Requires no rafts or supports. For a good first layer, I suggest burying the model 0.5-1.0mm into the print bed.
Introduction A simple pair of magnetic holders for attaching flat bellows to a metal lathe as ways covering. I used this 5/8" tall flat bellows available from McMaster Carr: https://www.mcmaster.com/1320K111/ These bellows are made for…
This is part of the Apollo Crawler that transports the Saturn V. The walkways go all the way around the crawler. Below the walkways is a two tier cable tray. Notice that between the two cable trays I added some small black wire. Note:…
Replacement Chamber Heater Cover Unit for Qidi Plus 4 Model Update: I've added a revision to the original model that includes a more curved path towards the outlet which slightly improves the overall air-flow. These models will have the…
Puzzle trays you can stack two ways. For storage they go on top of each other like any plate. But for puzzle making I prefer to stack them at an angle to each other so I can see what each contains with one glance. With the lip cut they…
A modular rack for pegboards with sideways orientation to save space. You can add the individual holder parts based on your needs: one big hole to hang a pair of pliers in, many small holes for allen keys, a small slot for calipers, ……
There are no special considerations for printing. Orient on the print on the flattest face, and print without supports. I wanted a simple, clean, sturdy holder for my tablet while playing flight sims. I use the tablet as a glass panel…
ANG below POL To prawda że żadna naprawdę dobra historia nie zaczęła się od 20.. ale czasem naprawdę potrzebujemy 20 :) ANG No good story starts with 20… but sometimes You realy need 20 :) if You like it please rate it :)
Overview This headphone hook holds your cans perpendicular to your desk, and beneath the surface to reduce the overall footprint. The clamp is fixed with a large printed thumbscrew to ensure there is a sturdy connection to your surface.…
Planetary Gear Spinner Key Highlights Four ways to spin Ring-free planet and sun gears Fully printed Optional ring stand for desk Description This is a fidget spinner that is a standalone two-stage planetary gear system, with no need to…
A FUN ERASER HOLDER THAT ALLOWS YOU TO HAVE ALWAYS A SHARP ERASER!! Share your prints!! The shape of the holder allows to always have a sharp end of the eraser. Simple Assembly STEPS: I used this ERASER : https://amzn.to/3Xae5gQ (This is…
Dies ist eine einfache Führung, um das Filament bei einem Anycubic Kobra 2 Drucker an der Kante des Druckers vorbei zu leiten, wenn man die Spule oben montiert. Ich habe einen Spool-Holder gedruckt und montiert, um das Filament oberhalb…
these are made to work with Dutchmogul's delving decor dungeon walls They are a remix with a lot of custom stuff. I made some curved walls and suport pilars and a double sized door archway as well as a wall remix with a few mm of floor to…
Designed this bracket to use in my Jonsbo D32 mATX PC case, but works with other cases as (see list below). The CPU cables provided with my Corsair SF850 power supply were relatively short and struggled to reach between the motherboard…
This is a new variation of my equipment box that I made back in March of 2020 for the Anycubic Mega I3 Mega. You can check out my older design here: https://www.printables.com/prints/33156-anycubic-i3-mega-clip-on-box This one is a bit…
This version is modified to be built on its side, with supports. A small amount of material was removed to ensure it lies flat. Placing it in this orientation makes it stronger due to where the layer lines form. It will not print without…
Just a simple divider for sideways game card boxes. I specifically used these boxes and they work great. I have two versions, 69x94 is the same size as these official BCW dividers and 69x100 is what I used in the pictures as it forces the…
This model is compatible with the lego system.
You're using a Makita or other Battery Adapter for your Dyson Vacuum and you wonder how to mount it to the wall now? Here's the solution, the sideway wall mount for Dyson Vacuums. Should fit most of the different Dyson models. With a…
OpenForge 2.0 Facade Stone Brick Doorways with working doors Remixed OpenForge 2.0 Facades Stone Brick Doorways to have doors that can be opened/closed. Combine them with the bases from the original set. Credits Based on Devon Jones great…
This is a remix of the platform from pitithom and base from gynovin https://www.thingiverse.com/pitithom/designs https://www.thingiverse.com/gynovin/designs Category: Games
Better Cable Raceways Having built my first Voron V0 I was very disappointed with the traditional cable raceways which came with my build. I also tried to print many other styles however I was always disappointed with them as the legs…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
It is a loaded dice. You have to pouse the print and add a nut into the dice for changing the gravity center
The Always on Time Exotic Sparrow form Destiny 2. Check out http://www.destinystlgenerator.com/ you can make anything destiny into an .stl. with some modification they are printable.
If you want to assemble aluminum profiles 30x30 to make a box
The model was downscaled using those bogies so the scale might be slightly of to Ho or OO scale but it should be close to those scales hope you enjoy :) massive thanks to Beusekomse Baan for making the Gauge 1 Model for Printing
This model is compatible with the lego system.
This is my adaption of a clicker. It get up to 86 dB! The original proifle is with adaptive layers for a smoother look on the rounded edges, if you dont want that for a faster print use the other profile. I would love to see your…
Oo gauge HO gauge track spacer for model railways
Designed up this brush holder to store brushes side ways avoiding degradation of the ferrule. Added some tools at the bottom and a holder for brush cleaner. Printing: 0.2mm Print side 2 times Print back switch supports a bottom Print…
This model reproduces a classic Italian State Railways (Ferrovie dello Stato Italiane) station building , designed specifically for N scale (1:160) railway layouts. The proportions and architectural details are optimized to fit seamlessly…
N gauge oo gauge ballast spreader for model railways railroad
90 degree Angle Corner Connector for Alu_Profile 2020 One Side Rounded 3 Way 24/08/2026 Update, published: 2020 R20-90 3-ways Connector RV1.stl (Geometry cleanup and optimization) 2020 R20-90 3-ways Connector RV1 Special.stl Profile:…
The walkway goes all the way around the crawler. The walkway parts are laid out in the attached photo.
I took the USB Cable Storage Organizer for Gridfinity and turned it sideways
This is a bracket to mount a MeanWell LRS-350 power supply on it's side vertically. I designed this mount to be simple and conscious of the vent holes. The two brackets for one power supply are identical. it has countersunk holes for…
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls, looks "good", isn't too chunky, & prints FDM as one piece w/ no supports. So I made my own. These walkways (or bridges) are…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
H0 Contact Line Mast for 1:87 Model Railways use 0.5mm metal wire as overhead line This is a 3D-printable overhead line mast designed for H0 scale (1:87). The contact wire is positioned approximately 68 mm above track level, which…
Der Halter passt zu Tenways Ebike Ladegerät für das alte und neue Genneration er kann an der Wand befestigt werde oder auch mit Kabelbindern an diversen Objekten.
This model is compatible with the lego system.
My wife has some concrete molds for Merci chocolate, so I thought: “Let’s create a 3D-printable version of this!” 🍫🧱 These are the 4 designs I ended up with 😄✨ Print recommendation: PLA .2mm layer height 15% infill 2 perimeters Update:…
2020 R20-90 2-ways Connector (90°) Suitable for: 24/08/2026 Update, published: 2020 R20-90 2-ways Connector RV1.stl (Geometry cleanup and optimization) All our designs are free to download and use. Your support fuels our creativity, if…
⏰ Parfait pour l’impression FDM en couleur ou en mode monochrome, ce modèle nécessite peu de supports. Faire attention en retirant les supports autour des oreilles et de la montre. En retard, en retard, pour un rendez-vous très important…
Hi, first test was full of success I make an version with 4, and with 12 ways out of this thing: https://www.thingiverse.com/thing:1209927 perhaps 12 ways cant work because they are to colose for glasses standing next to each other Now I…
WIP: If you have any improvements, I'm glad to hear them. Never be without a guitar pick again! The PickCard is a convenient card that ensures you always have picks at your fingertips. Designed to fit in your wallet, it holds multiple…
Another Funny Sign - "I always take life with a grain of salt, plus a slice of lemon and a shot of Tequila" - multi colour print, printed in ZIRO PLA Glitter Twinkling Red and Sunlu Matte white PLA. For more funny signs see my (growing)…
This is a small piece to allow you to mount the filament spool holder sideways. There are many adapters out there already, but I couldn't find one that easily fit past the Z rods (if you have dual Z rods) and didn't require unscrewing the…
A peaceful and heartfelt memorial statue designed to honor a beloved cat. This model features a gently resting cat embraced by angel wings, placed on a heart-shaped base with the text “Always Loved – Forever Missed” . A recessed holder is…
This is version 2: Original model here . I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was…
Same part as original but with flat part to print it sideways.
The flexi pangolin you always wanted, but now you can just print it. It has two tiny supports on one side, but mine just stuck to the plate. Hope you enjoy it if you give it a print.
This model is compatible with the lego system.
This model is compatible with the lego system.
