Wyniki wyszukiwania: wdr

Sortowanie

Liczymy pasujące modele…

P
PrintablesJirka

Large massive screwdriver holder / Masivní držák pro šroubováky

Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.

Wydruk około 12,57 €–15,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2058
Polubienia
823
Ocena
5
P
PrintablesAK3D

Multi-purpose keychain with screwdriver and integrated rule

This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1436
Polubienia
536
Ocena
4,67
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1244
Polubienia
318
Ocena
5
P
PrintablesMrHanjak

Doctor Who - Sonic Screwdriver 9-10th Doctor (The Ninth/The Tenth Doctor's) 2005 (NO SUPPORTS)

🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
1005
Polubienia
280
Ocena
4,8
P
PrintablesRobC

Screwdriver mount for Ryobi Link

Updated the model to allow for easier removal of the screwdrivers. Organize your screwdrivers using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports.

Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
505
Polubienia
97
Ocena
4,75
P
PrintablesJoaelso

Schneeglöckchen / Snowdrop flower

Für den Stiel habe ich Blumendraht verwendet. Die löcher dafür müssen in der Blüte und im Blatt etwas aufgebohrt werden. Das Blatt ist schwirig zu drucken, ich habe mehrere auf einmal gedruckt, da sollte es kein Problem sein.

Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
390
Polubienia
67
Ocena
4,33
P
PrintablesGuisimo

4mm bit holder gridfinity with screwdriver slot

*Updated part with better fit to gridfinity baseplate and 51 bits

Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu

Pobrania
201
Polubienia
36
Ocena
4,5
P
PrintablesAleksSadowski

Alsado Keychain Screwdriver for Makers and Engineers "Colibri"

Alsado keychain screwdriver for 1/4 inch bits "Colibri" A keychain screwdriver for 1/4 inch bits, including a bit friction fit and a bit compartment. Key Features bit friction fit prevents 1/4 inch bits falling out big keychain hole that…

Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu

Pobrania
169
Polubienia
43
Ocena
0
P
PrintablesSleepyhead

Cordless drill and screwdriver mount, my new Ryobi fits to

On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…

Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu

Pobrania
142
Polubienia
31
Ocena
5
P
Printablescode3

Sy's Peglock - LTT Screwdriver

Adapted Eltord's LTT Screwdriver Hanger to work with Sy's Peglock. Requires "Board Attachment (Universal)" from “Sy's Peglock - Locking Pegboard System.”

Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu

Pobrania
138
Polubienia
17
Ocena
4,67
P
PrintablesNuisance

Stanley STHT070885 Multibit Screwdriver hex bit holder for SKÅDIS

Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…

Wydruk około 3,82 €–4,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
107
Polubienia
19
Ocena
5
P
PrintablesJoaelso

Osterei mit Schneeglöckchen / Easter egg with snowdrops

Osteranhänger für den Osterstrauß Schnelle Druck ca. 14 Minuten Eine schöne Osterzeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen. weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit…

Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
106
Polubienia
11
Ocena
5
P
PrintablesSpacekoaster

Wiha small screwdriver holder

Hello, Here's a remix from the Wiha small screwdriver holder from Colorfabb on Thingiverse (https://www.thingiverse.com/thing:1487220). The holder is made to hold 6 PicoFinish HEX screwdrivers from Wiha. The original design had two holes…

Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu

Pobrania
80
Polubienia
13
Ocena
0
P
PrintablesKevin Barker

Gridfinity Bin for 7.2v Makita DF012D Screwdriver

This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…

Wydruk około 13,82 €–16,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
52
Polubienia
17
Ocena
0

Watchmaking screwdrivers stand

A precision watchmaking screwdriver stand designed to organize and store Bergeon® and other similarly styled screwdrivers, ensuring easy access and a tidy workspace. The stand consists of a base, a top face, and two types of screwdriver…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
44
Polubienia
7
Ocena
0
P
PrintablesLC

Screwdriver and pliers hanger for modular Snap Tool Rack

To be used with Snap Tool Rack wallmount blocks (STR-001 and STR-001B). Step file also available for easier modification

Wydruk około 17,89 €–21,87 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesPavelB

Stand for Parkside PASD 4 B2 screwdriver and 16 bits

I liked the https://www.printables.com/@Satellietje model, but I needed to keep more bits with the screwdriver, so I created similar stand in that way. The screwdriver has bits with diameter of 8mm hexagon (standard is something like…

Wydruk około 4,72 €–5,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
5
Ocena
5
P
PrintablesJoaelso

Osterei Schneeglöckchen / Snowdrop Easter egg

Osteranhänger für den Osterstrauß

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesTFL123

Cordless Screwdriver Set Wall Holder (WORX WX240/KS-Tools 515.3699/Kiprim ES2)

Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey

Wydruk około 14,45 €–17,66 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesHarsesis

Wera 7400 Torque Screwdriver Holder (7440 + 7441)

I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .

Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesAlvomane

Ergonomic Twirler for the Hazet 810R or Inbus Flow 73424 Bit Ratchet Screwdriver like WERA 838 | Ergonomischer Zwirbler für den Hazet 810R oder Inbus Flow 73424 Bit Ratschen-Schraubendreher

EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
4
Ocena
5
P
Printablessrirachachacha

Wera Gridfinity Screwdriver Rack 1x2 - Larger Diameter 14.55mm

Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).

Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
6
Ocena
0
P
Printablesschutz

Pocket Screwdriver Kit

Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…

Pobrania
12 210
Polubienia
5036
Ocena
4,78
P
PrintablesLoboCNC

Screw Holder for Screwdriver

I really like maxwxyz 's Screw Claw , but I'm not fond of printing the thin screw holder fingers in the vertical orientation. I also wanted to accommodate a larger variety of screwdriver sizes. This redesign has all the flexing elements…

Pobrania
10 556
Polubienia
3559
Ocena
4,82

Universal ergonomic screwdriver

Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…

Pobrania
9067
Polubienia
4607
Ocena
4,9
P
PrintablesFreddyZ

ratcheting mini screwdriver

I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…

Pobrania
7430
Polubienia
4011
Ocena
4,69
P
PrintablesPavel

IKEA Skadis screwdriver holder / držák na šroubováky

Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…

Pobrania
7282
Polubienia
1134
Ocena
4,94
P
PrintablesWürth

Würth keychain screwdriver

Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…

Pobrania
7035
Polubienia
1938
Ocena
4,8
P

Revolver | 2-Speed Screwdriver

The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…

Pobrania
6119
Polubienia
2506
Ocena
4,78
P

PocketDriver - EDC Hex Bit Screwdriver w/ Storage

The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…

Pobrania
5707
Polubienia
2212
Ocena
4,93
P
Printablespeaklin

Allen Screwdriver

New Version out now (metric and imperial) Keep your allen keys organized and turn them into a handy screwdriver! Head of screwdriver (black part) can rotate free for even more comfort. Note: You will need to warm up allen key with a…

Pobrania
5579
Polubienia
1048
Ocena
4,81
P
Printablescourroux

Screwdriver Holder Skadis

The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.

Pobrania
5548
Polubienia
814
Ocena
4,9
P
PrintablesWhopperPrinting

Single Piston Engine - Fully Printed Buildable Kit (With Printed Screwdriver!)

Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…

Pobrania
5314
Polubienia
1144
Ocena
4,93
P
PrintablesJake

Gridfinity 2x2 screwdriver hex bit holder stackable version

I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…

Pobrania
4682
Polubienia
583
Ocena
4,94
P
Printablesherbert

Pegboard Screwdriver Holder

I liked the idea of a honeycomb pattern to freely organize screwdrivers and other things from toya ( https://www.thingiverse.com/thing:3018389 ) But the solution had some flaws which forced me to redesign it. I do use Pegboards from…

Pobrania
4661
Polubienia
587
Ocena
4,84
P
PrintablesFinn

Ergonomic Screwdriver - Bit Holder

Use your standard bits in this simple screwdriver. Update I added a folder with STLs that support different sizes of magnets. The original version is still without a magnet, which works well in my case as the tolerances are low enough to…

Pobrania
4370
Polubienia
1511
Ocena
4,98
P
Printablesmaxwxyz

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Pobrania
4365
Polubienia
1816
Ocena
4,86
P
PrintablesStranula

Screwdriver Holder Multiboard - Multiple Mounts

I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…

Pobrania
3620
Polubienia
478
Ocena
4,78
P
Printablesfigterk

LTT Screwdriver Bit Holder (Multiple Sizes)

This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…

Pobrania
3505
Polubienia
436
Ocena
4,86

Honey Comb Screwdriver Holder Screw Mount Remix

I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…

Pobrania
3461
Polubienia
552
Ocena
4,73
P
PrintablesAkinayr

Honeycomb Screwdriver Holder / Shelf Remix for HSW - Multiple Version

There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.

Pobrania
3261
Polubienia
566
Ocena
4,97
P
Printablesblack3dworks

Dewdrop Jewelry Tray

The Dewdrop Jewelry Tray brings elegance and functionality together in a beautifully minimal design. Inspired by the organic shape of a dewdrop, this tray features two smooth, curved sections, making it perfect for organizing rings,…

Pobrania
3201
Polubienia
911
Ocena
4,89
P
PrintablesSTORM DESIGN

Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver for Winder Spool Frame 2 - Modular Design and Winder Spool Holder with Bearings - Modular Design

This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…

Pobrania
3149
Polubienia
236
Ocena
4,83
P
PrintablesJirka

Large screwdriver holder with honeycomb pattern

Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…

Pobrania
3063
Polubienia
881
Ocena
4,83
P
PrintablesFilip Kavan

Multiboard screwdriver holder/shelf

Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…

Pobrania
2940
Polubienia
446
Ocena
4,69
P
PrintablesMKS

LTT Screwdriver, With Ratchet

Introducing the unofficial 3D-printed LTT screwdriver clone, equipped with a removable ratchet mechanism and storage for six bits. Assembly is simple, with potential for minor adjustments using glue if needed. Ongoing enhancements ensure…

Pobrania
2759
Polubienia
1251
Ocena
4,61
P
Printablespltaylor3

Gridfinity Screwdriver Organizers

Screwdriver organizers that are compatible with Gridfinity. You will probably want to print 2 ends, and then how ever many middle pieces to organize your screwdrivers. Inspired by…

Pobrania
2713
Polubienia
341
Ocena
4,79
P
PrintablesMeister Edel

Screwdriver Ventilator & compressed air alternative Toroidal Design

You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…

Pobrania
2674
Polubienia
841
Ocena
4,71
P
PrintablesKieran E

Gridfinity LTT Screwdriver and bit holder

I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…

Pobrania
2411
Polubienia
252
Ocena
4,89
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Pobrania
2229
Polubienia
322
Ocena
4,8
P
PrintablesLeokaldzik

Annoying box, perfect gift box 56 srew, screwdriver

Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…

Pobrania
2209
Polubienia
281
Ocena
4,22
P
Printablesschutz

Pocket Screwdriver Kit v2

Update 3-Apr-24: Added files for different size magnets from various requests. Introducing v2 of the popular Pocket Screwdriver Kit ! Holds straight ¼" / 6mm bits, up to ~ 1" / 25mm in length. This version was re-built from scratch to…

Pobrania
2144
Polubienia
960
Ocena
4,86
P
PrintablesDave Borghuis

Screwdriver holder

Holder for screwdriver (set bought at Gamma)

Pobrania
2087
Polubienia
207
Ocena
4,87
P
PrintablesICT Avatar

Tools modular desktop stand (Tweezer;Plier;Screwdriver) V 2.0

Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…

Pobrania
2019
Polubienia
412
Ocena
4,88
P
Printablesksuszka

Wera Screwdriver Holder

This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…

Pobrania
1923
Polubienia
439
Ocena
4,87
P
PrintablesMelSK

LTT Screwdriver Case

FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Always liked the remixes of this box for other tools so thought I would have a go at creating my own for the LTT Screwdriver.…

Pobrania
1878
Polubienia
399
Ocena
4,95
P
Printablesdaclasen

Skadis Holder for Wera Kraftform Micro Screwdriver

This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…

Pobrania
1779
Polubienia
410
Ocena
4,9
P
PrintablesDSwanlund

LTT Screwdriver Bit Holder - Gridfinity

This is a Gridfinity -compatible screwdriver bit holder for the bit-sets sold by Linus Tech Tips. One of these (1x1x25) blocks will hold exactly one set of 12 bits. They are stackable when empty. LTT's bits are slightly shorter than…

Pobrania
1747
Polubienia
300
Ocena
4,83
P
PrintablesFreddyZ

Print-In-Place ratcheting screwdriver

So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…

Pobrania
1709
Polubienia
415
Ocena
4,62
P
Printablesdavidmakes

iFixit Mako Screwdriver Mount for Ikea Skadis

About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…

Pobrania
1694
Polubienia
294
Ocena
4,95
P
PrintablesMKS

LTT Stubby Screwdriver

This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…

Pobrania
1694
Polubienia
728
Ocena
4,68
P
Printablesmathiasl

Screwdriver Holder

This Screwdriver Holder is more space effective since you can just push or pull the screwdriver right in or out. Fits most screwdrivers and they sit tight and doesn't wiggle. To attach it to the HSW you need the empty inserts*. There are…

Pobrania
1677
Polubienia
254
Ocena
4,97
P
PrintablesBoolean263

Gridfinity 2x2 holder for hex screwdriver bits

My first try at creating a model for sharing. Holder for 64 hex screwdriver bits and a magnetic extension bit. Inspired by LTT Screwdriver Bit Holder , but made “from scratch” in TinkerCAD using this template .

Pobrania
1571
Polubienia
177
Ocena
4,94
P
PrintablesLocalOutlier

Low profile right angle screwdriver handle

I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…

Pobrania
1556
Polubienia
489
Ocena
4,94
P
PrintablesMartin Rigatoni

Reversible Ratcheting Screwdriver

It's my turn again. I wanted to design a reversible ratchet that worked without moving an axle. I wanted it to be as small as possible and I wanted to keep the aesthetic of my first screwdriver keychain . This is what I've got. It's 50 mm…

Pobrania
1545
Polubienia
623
Ocena
4,75
P
Printablesshiura

Print-in-place Palm Ratchet Screwdriver Knob

3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…

Pobrania
1530
Polubienia
270
Ocena
4,71
P
PrintablesReelClones

Multiboard Ultimate Screwdriver Holder!

The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…

Pobrania
1526
Polubienia
139
Ocena
5
P
PrintablesGlennovitS 3D

Compact Bit Driver (pocket size screwdriver)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Pobrania
1504
Polubienia
575
Ocena
5
P
PrintablesPointNemo

Magnetic Precision Bit Screwdriver 4 mm / 6.3 mm

Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…

Pobrania
1472
Polubienia
577
Ocena
5
P

Bosch GSR 12V-15 Battery Screwdriver Holder

Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…

Pobrania
1447
Polubienia
213
Ocena
5
P
Printablesdodasch

Screwdriver Holder Wall Mount

Some holders for screwdriver

Pobrania
1440
Polubienia
147
Ocena
4,92
P
PrintablesAMTprojects

Tiny Travel Screwdriver

What it is A tiny screwdriver, storing seven 4mm Micro Bits (28mm in length) and attachable to a keyring or string on your gear. → Be prepared for that single or few screws that casually pop up, trying to ruin your day. The forces induced…

Pobrania
1434
Polubienia
984
Ocena
4,82
P
PrintablesMarcElbichon

French Cleat Honey Comb Screwdriver Holder Screw Mount Remix

Made this remix for ¾" french cleat Added a single and a dual color version (MMU) Print upside down!

Pobrania
1392
Polubienia
250
Ocena
4,91
P
PrintablesSublevel4

Honeycomb Storage Wall screwdriver holder

I love the Honeycomb Storage wall. I was transitioning from my peg board and I couldn't find a holder for my screwdrivers that worked like I wanted, so I made one. Nothing fancy but it works like I wanted it to.

Pobrania
1371
Polubienia
214
Ocena
4,83
P
PrintablesEltord

LTT Screwdriver Skadis Hanger

I needed a way to hang my new LTT Screwdriver on the Skadis pegboard that I have in my office. This just holds it vertically and it fits inside an angled hole that helps hold it vertical and keeps it from falling over. I've created a…

Pobrania
1361
Polubienia
145
Ocena
4,88
P
PrintablesG4ZO

Ratchet screwdriver (Print in place)

In version 3 The bit can be inserted up to halfway. In version 4 you can insert the bit all the way inside, so that greater torque can be applied before it fails. Version 5 has an upgraded hole for the bit, and also a place to add A small…

Pobrania
1319
Polubienia
210
Ocena
4,67
P
PrintablesBrian.Kuo

SKADIS Screwdriver Holder

Designed to fit a Stanley changeable head screwdriver, your mileage may vary. Make sure to check the dimensions of your screwdriver against this model before printing! You can use TinkerCAD or some other quick modeling software. There's…

Pobrania
1300
Polubienia
158
Ocena
4,91
P
PrintablesErer2001

NOT - LTT Screwdriver - Fancy

GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/580064 In this alternative version the screwdriver body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…

Pobrania
1293
Polubienia
625
Ocena
4,83
P
PrintablesMeister Edel

Universal self locking fastener (Screwdriver, Cables, etc.)

Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…

Pobrania
1243
Polubienia
619
Ocena
4,93
P
PrintablesJeremy White

Gridfinity Wera Screwdriver Tray

This was to hold a set of 12 Wera stainless screwdrivers. The tools were a gift but they look like this set available on Amazon or at Sears.

Pobrania
1215
Polubienia
203
Ocena
5
P
PrintablesWarlock Til

Multiboard screwdriver mount

Slicer settings and other info: 0.4mm nozzle 0.2 layer height PLA Supports enabled (tree supports) 15% gyroid infill Holes centers are placed 30mm apart for the big mount, and 25mm apart for the medium sized one. All files are available…

Pobrania
1212
Polubienia
149
Ocena
5
P
PrintablesAntoine

HSW honeycomb Screwdriver holder remix

This screwdriver holder works really well. Fits all kinds of size and shapes. Just click your tool in and grab it when you need it. For me it is also important that my screwdrivers are hanging straight and not dangling around. I printed…

Pobrania
1200
Polubienia
170
Ocena
4,89
P
PrintablesJouni Lindqvist

Honeycomb wall screwdriver holders

Screwdriver holders which fit Wera size #0, #1, #2, #3 for honeycomb storage wall but will probably fit a lot of other models also. I used layer height 0.2 mm, 3 walls and infill 30% with regular PLA It is a tight fit into the socket, you…

Pobrania
1166
Polubienia
247
Ocena
5
P
PrintablesJEMcats

Screwdriver Bits Chess

Make your own travel chess set or bit storage system. This uses 1/4 inch bits. Click here if the video doesn't work. Print the top layers as a different color to get the alternating colors. I paused the print at the layer and manually…

Pobrania
1161
Polubienia
958
Ocena
5
P
PrintablesPvtDBJackson

Snap-On Screwdriver SDDP42 Handle

Snap-On screwdriver handle modeled by manually measuring one. This isn't exactly functional as-is, since there is no provision for attaching anything to the handle. This is uploaded so that others might remix it into something useful.…

Pobrania
1131
Polubienia
104
Ocena
5
P
PrintablesJohn

Skadis Screwdriver holder

A screwdriver holder for a set of 11 screwdrivers for Ikea Skadis pegboard. Original concept was taken from another design on thingiverse which I can't find now. Printed in PETG.

Pobrania
1061
Polubienia
155
Ocena
4,63
P
PrintablesGamma Blocker

Skådis / Skadis - LTT Screwdriver

Use with Ikea Skadis system and T-Clips to mount (see remix section). Be sure to print a T-Clip to go along with this model. After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate…

Pobrania
1038
Polubienia
154
Ocena
4,94
P
Printablesfigterk

LTT Screwdriver Bit Holder Magnetic Retention (Multiple Sizes)

This is a remix if the inner portion of my original model. This one is intended to be printed with rigid filament (PLA, PETG, ABS, etc.). It has the corresponding number of holes on the bottom to insert 6x3mm magnets for bit retention.…

Pobrania
1018
Polubienia
132
Ocena
5
P
PrintablesCheesus

EDC Screwdriver

Organise your pockets with an EDC Screwdriver. Accepts standard 1/4" hex driver bits. Hex bit can be inserted in end like a typical screwdriver or in the side for additional torque. 2x1/4" hex bits are magnetically retained in the shaft…

Pobrania
1007
Polubienia
282
Ocena
4,71
P
PrintablesMartinBLACK

Screwdriver handle for hex bit

Small and regular size of screwdriver handle for hex bit. Easy to use. Recommended layer height: 0.2mm

Pobrania
1004
Polubienia
102
Ocena
4,84
P
PrintablesArik Shemesh

Multiboard screwdriver holder

The original design is for Honeycomb Storage Wall and there is an adapter ( https://thangs.com/designer/Keep%20Making/3d-model/Honeycomb%20to%20Multiboard%20Snap-974237 ) that fit to the holder, but the spacing of the Honeycomb is…

Pobrania
1000
Polubienia
156
Ocena
3,33
P
PrintablesLelN

Universal Screwdriver Organizer

Naming: sd-holder = screwdriver-holder 7X = 7 slots for screwdrivers Recommended sizes: 7X = 4-5 Screwdrivers 9X = 5-7 Screwdrivers 11X = 6-9 Screwdrivers 13X = 8-11 Screwdrivers 15X = 10-13 Screwdrivers This is only a recommendation !!!…

Pobrania
982
Polubienia
95
Ocena
4,86
P
Printablestyler

Multi-Bit Precision Screwdriver (4mm bits)

NOTE: Although this prints well on my old Anycubic i3 Mega, it does not print properly on my P1S. Because of the increased speed and accuracy of modern printers printing it on the side with the spinner does not offer enough stability. It…

Pobrania
904
Polubienia
117
Ocena
5
P
Printablesforsaken_candy

Multiboard/HSW screwdriver holder

Screwdriver holder for HSW (Honeycomb Storage Wall). Remixed to use the small hexagon inserts, which are easier to remove/relocate. Thanks to @CarbonProp_540499 for the excellent original design. Allows you to easily pull out/insert the…

Pobrania
874
Polubienia
97
Ocena
4,91
P
PrintablesCFairhurst

Compact Screwdriver

I was trying to get a screw in with limited clearance using a pair of pliers and a hex driver bit. Thinking there is a better way, I came up with this. It allows a hex drive screwdriver bit to be used with a minimum clearance but still…

Pobrania
867
Polubienia
115
Ocena
4,9
P
PrintablesRoei Weingarten

14th Doctor's Sonic Screwdriver

Based on photos and videos if the CO toy, which seems accurate to the actual prop. Made in tinkercad For people looking for better screen accuracy, I'd recommended this model Knurled rings by @Wilko, link:…

Pobrania
864
Polubienia
100
Ocena
4,5
P
Printablesdesaster

Gridfinity screwdriver rack

A customizable gridfinity compatible screwdriver rack. This is a bit of a work in progress. It's meant to be printed in multiple parts to avoid having to use supports. The four legs are attached to the matching holes in the top and bottom…

Pobrania
853
Polubienia
104
Ocena
5
P
PrintablesErer2001

NOT - LTT Screwdriver - Simple

GENERAL INFO I separated into 2 version: FANCY → https://www.printables.com/it/model/580045 Custom color accent ring and spinning end cap STUBBY → https://www.printables.com/model/595619 SIMPLE (This) In this alternative version the…

Pobrania
846
Polubienia
246
Ocena
4,89
P
Printablesapembo

Screwdriver Holder

Screwdriver holder, can be wall-mounted or screwed to pegboard. Holds three screwdrivers. In the photo I've printed two, one mirrored so that it holds 6 screwdrivers. Designed so you don't need to lift the entire shaft out of the holder,…

Pobrania
842
Polubienia
92
Ocena
5
P
Printablesmartin

10 pcs Screwdrivers holder wall mount

Holder for 10 pcs screwdrivers kit: https://www.temu.com/cz-en/-11pcs-screwdriver-set-with-magnetic-phillips-flathead-tips-chrome-vanadium-steel-ergonomic-grip-rust-resistant---tool-storage-case-g-601099592124931.html Optionally with hook…

Pobrania
833
Polubienia
303
Ocena
5