Wyniki wyszukiwania: wider

Sortowanie

415 modeli

P
PrintablesTridense

Wider Headphone hanger - Under desk w/ cable management

Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for cable management Fits up to 45mm wide headphone bands Screw holes are 40mm apart center to center Max screw width 5mm Max screwhead width 10mm

Pobrania
1580
Polubienia
141
Ocena
4,9
P
PrintablesHogwing

Wider Hinged Hip Joints for Dummy 13

There are 3 hip options included: Standard width flexible, wide flexible, and wide non-flexible. Shown in the photos is the wide flexible version.

Pobrania
1377
Polubienia
375
Ocena
4,25
P
PrintablesTinwhistler

Wider KitchenAid Accessory Holder

See my improved version 2 here ! ---------------------- Here is a clever, sleek storage solution for a stand mixer’s attachments—each piece is suspended like a kitchen gadget display! All mount neatly under a shelf and ready for action,…

Pobrania
1024
Polubienia
392
Ocena
5
P
PrintablesRaafk
Pobrania
1007
Polubienia
158
Ocena
5
P
PrintablesSage Lin

Wider body tray for Creality Ender 3 V3 SE\KE

Remixed with the original tray for wider tray body making it easier to catch extrusion when hotend is at left most pos

Pobrania
845
Polubienia
140
Ocena
4
P
PrintablesPapaNoah

Can Cover remix - for wider mouths

This is a Remix of the Can Cover Version 2 by dalrmat. It is designed for people where the mouthpiece of the original Version is too small. Protect your drink from insects. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts:…

Pobrania
716
Polubienia
103
Ocena
4,75

51mm Espresso dosing funnel - Wider

Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.

Pobrania
654
Polubienia
66
Ocena
4,75
P
PrintablesMythor

Easy Print Piggy Bank (wider coin slot)

This Easy Print Piggy Bank is remixed from boniilloo's original as I needed the coin slot to be slightly wider to accomodate Australia's 50c piece, which measures around 32mm at its widest. This likely could have been accomplished by…

Pobrania
629
Polubienia
136
Ocena
4,82
P
Printablesnpburns224

Toothpaste Squeezer for Wider Tubes + more

Modified the original model with the following changes: Elongated model to support toothpaste tubes up to 60mm wide Added stand to hold tube upright once it's short enough Added “fins” to help to squeeze the toothpaste more gradually for…

Pobrania
595
Polubienia
64
Ocena
4,91
P
Printablesszuszu

Improved MK4 Fan duct - wider

The original model did not have centered outlets on either side of the nozzle. I added 1.2mm. My MK4 is from November 2023 and using with improved fan door: https://www.printables.com/model/621424-improved-mk4-fan-door

Pobrania
589
Polubienia
84
Ocena
4,95
P
PrintablesFrankWL

Biegevorrichtung für Widerstände (Bending device for resistors )

Biegevorrichtung für Widerstände, Dioden, etc. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Filament: Anycubic PLA green Category: 3D Printing

Pobrania
574
Polubienia
40
Ocena
4,6
P
PrintablesUnicorn3D

Wider and longer underdesk drawer (15x29.5x7.3cm)

The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…

Pobrania
539
Polubienia
252
Ocena
0
P
Printablesvg1

Filament Spool Clip v5 - Wider Mounting

Keep Your Filament Tidy – Now Stronger Than Ever (V5) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 5 , featuring wider mounting. Ideal for…

Pobrania
497
Polubienia
39
Ocena
5
P
PrintablesBaRoN30s

SIMPLE INCENSE STICK HOLDER - WIDER BRIM

This is a copy of another I download But noticed the brim wasn't as wide as it could be & the ash was falling all over the place. Also, the centre hole was too small for the cheap incense sticks I was buying. So redesigned it with a wider…

Pobrania
471
Polubienia
43
Ocena
5
P
PrintablesJoesTinman

Y-Splitter with wider entry for PC4-M10 Push-fit

I tried about 5 different version of the Y-splitter but the filament kept snagging on the edges of the entry of the tube. Finally decided to create my own version. This version takes into account the wider 2.5mm inner diameter of the…

Pobrania
456
Polubienia
32
Ocena
5
P
PrintablesChris G

Wider Honeycomb Shoe Rack

This is a wider version of the honeycomb shoe rack as the original didn't fit most size 13 shoes. I kept the hexagon pattern at the same size and added one column for a 20mm wider version. It now fits the widest shoes I had on hand to…

Pobrania
422
Polubienia
49
Ocena
5
P
PrintablesHitLuca

Wider PCB Din Clip (Voron 0)

Nothing fancy, just a wider version of the original din clip (4mm wider)

Pobrania
403
Polubienia
32
Ocena
5
P
PrintablesStuart Wyre

Bambu P1S & X1C Spool Holder Adapter for Wider Spools. Clips on - No Tools Required

I was disappointed to find that the Bambu P1S single filament holder is not long enough to accept some filament spools, in particular some Prusa spools. I didn’t want to screw anything permanently to the printer, so designed a clip on…

Pobrania
393
Polubienia
37
Ocena
5
P
Printablesdoctorg

DJI Tablet Mount with Wider Hook

I widened the section on the hook to use when the tablet is in a thick case. There are 2 versions, one for an 8" and one for a 10" tablet.

Pobrania
384
Polubienia
39
Ocena
5
P
PrintablesPetehagoras

Core One modified "bowden-bend" with wider radius

Especially when in use with the MMU3 community edition, there is more space to the top. A wider radius on the bowden bend leads to a smoother loading procedure, what enhances reliabilty of material changes Additionally I found it helps a…

Pobrania
371
Polubienia
70
Ocena
4,91
P
PrintablesTheCableGuy96

Anycubic Mini Air Purifier Stand for Bambu Lab Printers - Wider & Taller

The original model of this was designed to support both the Elegoo and Anycubic mini air purifiers. But I always found the Anycubic ones didn't fit properly. They always broke at the bottom when I pushed them all the way in as they should…

Pobrania
365
Polubienia
101
Ocena
4,75
P
PrintablesFlx_Mark

SUNLU S2 Dryer Spool Mod - Thin/Wider spool bearing, larger hole sizes - Sensor free

It uses 608 zz 8x22x7 bearings. Print on PETG or some material witch can handle heat. 4 walls 4 bottom 4 top 15% infill Little support on back side stand. Brim of 10mm for the Shaft and about 6mm for bottom Spacers. I printed in Garolite…

Pobrania
365
Polubienia
51
Ocena
4,86
P
PrintablesEddoWagt

Wider Stackable Keycap Storage Tray

This is a remix of the Stackable Keycap Storage Tray by SpikedSynapse. I made the trays wider to accomodate a full row of F keys next to eachother, so you can fit 12 units of keys in a row. I also made a taller version available for…

Pobrania
355
Polubienia
45
Ocena
0
P
PrintablesFoebik

Meta Quest Pro Speaker Amplifiers (Wider)

Found the original version from MeltsPlastic to be great, but found that that in order to have them over the Quest Pro speaker slot, they were a little to far forward for me. This left some mids and a fuller sound stage on the table. I…

Pobrania
349
Polubienia
25
Ocena
5
P
PrintablesJimmy_H

V-Spooler Wider Cam Tooth Carrier

This is a fix for the V-spooler. The Cam guide stuck and I had no luck with it. But another user on bambulabs had made a wider guide and a larger cam tooth. so I made the files myself and now it works a treat.

Pobrania
332
Polubienia
42
Ocena
5
P
PrintablesHeine Sørensen

Kingroon KLP1 riser 30mm and higher and wider TPU feet

Well just a 30mm spacer for the top (print 4) and some caps for the M3 hardware uses 20x M3x40 hex screw. And the feet , print in TPU (print 4)

Pobrania
318
Polubienia
24
Ocena
5
P

GepRC Mark4 side cover v002 + v003 (wider arms hole) + STEP

First version was very lightweight, also easy to install. This version more strong and more crush ready. Also some different design v002 and v003 difference only arms holes, v003 much wider to fits more arms variations. This is an…

Pobrania
317
Polubienia
10
Ocena
0
P
PrintablesNikorasu

Low-Poly Spiral Twist Vase (wider)

This is a Low-Poly Spiral/Twist Vase, with a faceted light-reflecting surface, inspired by the Low-poly Rose Twist Vase by Riskable , and made wider to fit more flowers. Looks great in shiny and multi-color filaments, and sparkles when…

Pobrania
314
Polubienia
47
Ocena
5
P
PrintablesKrypt0niT

Sponge holder with wider space

Basically the same model i remixed but with wider space for your sponge

Pobrania
308
Polubienia
77
Ocena
4,83
P
PrintablesRichiH

Cable management clip for Ikea Besta, Billy, and other 18mm (or wider) furniture with Tesa Powerstrip / 3M Command strips

A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…

Pobrania
305
Polubienia
61
Ocena
0
P
PrintablesRobin Grape

Fanatec V3 pedal wider face plate

Based on Fanatec's pedal faces that comes with the Clubsport V3 pedals. Just 25 mm wider on one side. Fits all pedals and can be mounted upside down. I use this on my throttle and brake pedals. Both with the extension on the left side of…

Pobrania
301
Polubienia
42
Ocena
4,75
P
PrintablesThijmnesoy

Butterfly Comb with wider teeth

I made this remix of the butterfly comb because I heard that a comb with wider teeth and the teeth further from eachother was better for your hair.

Pobrania
300
Polubienia
19
Ocena
2,67
P
PrintablesWes

Protective Face Shield with Wider Coverage to Temples, covered top

This is a remix of the Prusa Protective Face Shield RC2/RC3 to extend the face shield so that it wraps around closer to the temples to provide more side protection, and adds an integrated top cover similar to the Prusa top cover. I also…

Pobrania
299
Polubienia
3
Ocena
0
P
PrintablesIVDx Consulting

A wider dry-filament box for 3-D printing

This is a somewhat wider dry-box for filament rolls wider than 70mm. Some necessary files and construction details are found in the earlier project. I personally prefer the first version, but I made a couple of these for rolls which were…

Pobrania
284
Polubienia
46
Ocena
0
P
PrintablesJPMakesStuff

Organizer bin wider and reduced height compatible with Ryobi Link

This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. This bin is wider than a normal bin on one side, use the extra space at the end of a Link rail or to fill a…

Pobrania
254
Polubienia
48
Ocena
5
P
PrintablesChrisFo8390

Filamentalist V2 / more sturdy / wider spools

Update 01/12/2025: QOL Changes und TPU Roller added + LED Mod, if used on NightOwl! UPDATE 05/16/2024: Modded roller_idler and counterpart, its now easiear to print, build-in support removed. To build this, you need: 8x100mm rods (2x)…

Pobrania
249
Polubienia
76
Ocena
5
P
PrintablesRobinek70

Gravity Broom Holder - wider 8mm

8mmm wider to accomodate slightly larger broom handles

Pobrania
248
Polubienia
27
Ocena
5
P
PrintablesTimmaey

Push Bottle Opener with improved hook and lever + wider opening

Additionally you'll need: 3 x M3x20 mm screw (or 1 M3x20 mm and 2 M3x16 mm screw for the version with the threaded inserts) 1 x M3x30 mm screw 1 x rubber band

Pobrania
247
Polubienia
24
Ocena
0
P
Printablesamorim

Improved MK4 Fan duct - wider and heat inserts

All credits to Juan Puchol. Great job! This is a remix of szuszu's wider version. In summary, this version is 1.2mm wider, and instead of screwing into plastic, it features heat-set inserts. Instructions: Insert 2x M3x5x4 heat inserts…

Pobrania
246
Polubienia
49
Ocena
4,8
P
PrintablesLP3D

Modular wire management tray with wider gaps

Modified version of @salacious_sloth's excellent wire management tray, with wider gaps between prongs.

Pobrania
242
Polubienia
57
Ocena
4,83

Dice Tower - No screws, Thicker tray arms, Wider hinges

Change log: V4 (1/10/24) - Update hinges

Pobrania
239
Polubienia
31
Ocena
5
P
PrintablesRhys Burrows

(1mm Wider) Baratza Encore (ESP) Dose Cup Riser

Increased the width 1mm overall for a more snug fit. Perfect fit that requires force to remove

Pobrania
237
Polubienia
21
Ocena
5
P
PrintablesAndune

Power strip mount for wider power cords

One of my power strips was wider than normal on the cable end. This design expands the cable opening to just above 3cm.

Pobrania
232
Polubienia
32
Ocena
5
P
Printablesbobofox

Spool wider border or smaller axle diameter (BambuLab AMS, Hydra and non-Hydra)

For my Bambu (AMS, no Hydra) X1C it is nice to have a spool with a smaller axle diameter. This way 1kg of filament fits on this spool without scratching at the feeders. The spool with the wider border helps Hydra Systems to have more…

Pobrania
228
Polubienia
45
Ocena
5
P
PrintablesF.L.o

even wider carriages

I had the problem with approx. 50% of the printouts that the ball bearing could not turn at all / only with difficulty. Even with the Remix from cmyk which increases the tolerances somewhat. (I suspect that it often jams under the ball…

Pobrania
227
Polubienia
20
Ocena
5
P
PrintablesMihai-Gabriel

Wider elephant iphone holder

Wider elephant iphone holder

Pobrania
220
Polubienia
19
Ocena
5
P
PrintablesFozi

Wider 20mm Micro Swiss Direct Drive Cable Management (Ender 3)

[ UPDATE: August 10, 2022 ] I remodelled the extruder part so that it connects to a drag chain (see here: https://www.printables.com/model/256682-cable-management-with-drag-chain-for-micro-swiss-d [UPDATE: January 29, 2021] I remodelled…

Pobrania
211
Polubienia
27
Ocena
4,8
P
PrintablesDieti

Multi-Use Case longer & wider Version

This is another version of Multiuse-Csae. It's longer and wider. On this model, use also a section of 1.75mm filament inside the hinge to connect the lid to the base.

Pobrania
210
Polubienia
37
Ocena
4,6
P
PrintablesGhostguy6

Wider 2 Slot Holder for Comfort Grip Pliers to Fit Honey Comb Walls

A slightly wider holder to fit the comfort grip pliers like Craftsman, Mastercraft of Kobalt. The original file printed with a slot width of 14.3mm and unfortunately was a very tight fit for my pliers and you could see the bulging on the…

Pobrania
209
Polubienia
33
Ocena
5
P
PrintablesDocHertz

Beretta 87 Target wider grip

The Beretta 87T has a very narrow grip, and it is hard for anyone with an average or larger hand to get a proper hold on it for correct finger placement on the trigger. To improve my grip, I created custom grips tailored to my hands.…

Pobrania
209
Polubienia
11
Ocena
5
P
Printablesrhn

Best Spoon Rest Ever - Now for wider utensils

Really like the original model by wbu, but like a lot of other people I have a lot of utensils that are too wide to sit in the slots, and too unstable if I put them in sideways. So I decided to simply remove one of the prongs to turn two…

Pobrania
205
Polubienia
19
Ocena
5
P
PrintablesWill.i.am

Wrench organizer 9-19 Remixed with longer wider slots

Great design by Skedmannen3D. Tweaked the slots a bit wider and deeper for my wrenches to fit. Used an M3 x 35 mushroom head screw PLA or PETG 30% infill 0.2 layer height No supports nor brims required. Category: Tool Holders & Boxes

Pobrania
205
Polubienia
34
Ocena
5
P
PrintablesGremlin

Beer/Pop Can Opener/Protector remix for all/wider can clips

Printed in PLA with support 0,2 layerheight 0.4 nozzle 15% infill

Pobrania
200
Polubienia
19
Ocena
5
P
Printables43D PRINT

Wider and higher version of tmealy's Baofeng UV-5R Button Guard

wider and higher construction. Better hiding buttons and volume wheel.

Pobrania
195
Polubienia
25
Ocena
0
P
PrintablesAsus1357

Wider and narrower remix spool holder

remix of https://www.prusaprinters.org/prints/146757-spool-holder-with-bearings which is a remix of orginal model https://www.prusaprinters.org/prints/62910-use-m3-screws-spool-holder-for-prusa-mini-flexible both great models! While the…

Pobrania
192
Polubienia
52
Ocena
4,67
P
PrintablesPeliX3D

mechanical iris V2 | wider tolerances | print in place | fidget

After receiving feedback from some people on the first version of this mechanical iris that the tolerances were too tight, I have now created an adjusted version of the model. This way, even those with less-than-perfectly calibrated flow…

Pobrania
189
Polubienia
30
Ocena
0
P
PrintablesClumsy Badger

Leatherman Wave Belt Holder (Wider 45mm belt loop)

Remixed to allow for a wider belt (increased belt loophole to 45mm) Print with standard supports (everywhere) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Amazon…

Pobrania
189
Polubienia
27
Ocena
5
P
PrintablesKnorbert

Reuseable Spool for the Prusament Refill System Wider Holes for AMS Lite

Remix of the reusable spool for the Prusament Refill System with enlarged holes for the Bambu Lab AMS Lite. The new holes have a diameter of 53 mm, as the original 51 mm holes were not large enough for the Bambu Lab AMS Lite, which…

Pobrania
188
Polubienia
14
Ocena
0
P
PrintablesKuusetsu

SKR Mini E3 V3 Mini Case, but longer (and wider)

In my journey to upgrade my Ender 5 Plus, I found myself opening and closing the electronics box at the base of the printer a LOT. It quickly became a pain, so I went hunting for a new enclosure for my board… one that was easier to get…

Pobrania
183
Polubienia
21
Ocena
5
P
PrintablesAriannus

USB holder for wider drives

Usb holder for 30 pendrives, 12 sdcard and 10 microsd and a tray. Most of my drives were too wide to fit drives into both rows of USB slots. Added some extra space between the rows. USB slots come out to tight on my printer so I scale it…

Pobrania
182
Polubienia
7
Ocena
5
P
PrintablesMax

CNC Drag Knife (wider remix)

This is a very crude remix of giufini drag knife. I was getting some bending so added some extra side support support to strength it in the direction it was bending. This helped, but I also reduced my depth of cut to further assist.

Pobrania
179
Polubienia
19
Ocena
0
P
Printablesmm404

Decorative Q-tip Holder (25% wider and thicker remix)

I printed mine with (Prusament Signal White) PETG and 30% infill, except of the shell, which I set to 4 perimeter walls (which makes most of the cup solid). !!! NOTE !!!: The Holder Shell is tapered on one side. This side is meant to be…

Pobrania
176
Polubienia
30
Ocena
4,5
P
Printablesmiak3D

Wider Bambu poop chute with curve

I ran into issues with the chute jamming up due to being so narrow, it wouldnt scale properly so i made a couple wider versions for myself in f3d. There is a 15mm wider version and a 20mm wider version that uses the same magnets as the…

Pobrania
176
Polubienia
33
Ocena
5
P
PrintablesPorco0321

Incense stick holder wider

Simple cut, scale up and paste of the original by jurassic73, done within Bambu Studio.

Pobrania
173
Polubienia
13
Ocena
0
P
Printablesgrtych

V3 KE Nebula Cam X Axis Mount - Wider View

v2: Offset the camera slightly inwards to avoid a small collision with the top of the Nebula pad - when utilizing the factory mounting location. v1: Moved bottom of camera mount further away from edge of bed for a wider up close viewing…

Pobrania
170
Polubienia
25
Ocena
0
P
PrintablesCraig Heath

Vertuo Pop Wider Drip Tray and Insert

The “Pop” model of the Nespresso Vertuo coffee machine comes with a drip tray designed for Nespresso's own “Vertuo Gran Lungo” mugs. To use normal sized mugs you need to remove the drip tray, which is not ideal. I liked Matt Rayner's…

Pobrania
169
Polubienia
16
Ocena
4

Wider AMS Helper

Wider version of the popular AMS feeder helper with scalable parts in the .3mf file (Bambu Slicer). Original versions were wither too tall, or not wide enough, causing filament to wrap around the helper. --- 🤕 Disclaimer: This, like the…

Pobrania
163
Polubienia
31
Ocena
0
P
PrintablesRobour

Wider base for phone stand

Base for thicker phones or tablets. Works with my phone stand design.

Pobrania
163
Polubienia
13
Ocena
5
P
PrintablesTimo Verberne

Guess Who? Travel game edition with 24 flaps (Wider with bottom REMIX)

Remix which has a 5mm bottom. (twice the height of the original in total) & wider flaps. 30mm outside width. It feels a lot more solid and doesn't bend. The original flaps felt a bit to small so I enlarged the width from 20.4 to 30mm.…

Pobrania
157
Polubienia
17
Ocena
0
P
PrintablesDwayne Hollars

FlashForge Adventurer 5M (AD5M) Enclosure Lid Holder - Wider

A wider version of the lid holder created before: https://www.printables.com/model/890592-flashforge-adventurer-5m-ad5m-enclosure-lid-holder/files

Pobrania
155
Polubienia
21
Ocena
5
P
PrintablesBramI

DIN rail mount Raspberry Pi 4 Armor Case (wider grips for case) - flat position / horizontal mount.

Adjusted grips at the side to support the GeeekPi Raspberry Pi 4 Case. Allows fixing in a standard electricity cabinet (DIN rail)

Pobrania
153
Polubienia
14
Ocena
0
P
PrintablesIceman

Aquarium Water Change Diffuser Wider Hanger

Just modified the hander to work with aquariums that have a fixed wide trim at the top. See pictures… It'll need M4 x 16mm screws. The diffuser for the hanger can be downloaded here;…

Pobrania
152
Polubienia
25
Ocena
0
P
Printablesjeloneal

Skadis Abstandshalter (größeres Senkloch) - Skadis spacer with wider countersunk hole

Die Abstandshalter von @lansolo81 funktionieren hervorragend. Allerdings steht der der Senkkopf der Spaxschrauben etwas über das Skadisbrett heraus. Der Remix behebt dieses kleine Manko durch ein etwas weiteres und tieferes Senkloch, das…

Pobrania
152
Polubienia
17
Ocena
5
P
PrintablesEvan
Pobrania
151
Polubienia
45
Ocena
5
P
PrintablesDaniel

#0100 Monopoly Player Tray / Organizer with wider properties area

It is the same great Monopoly Player Tray / Organizer by BuildX but the left tray for the properties cards is wider for the new wider properties cards.

Pobrania
150
Polubienia
19
Ocena
0
P
PrintablesKyle

Bambu P1S/X1C Spool Holder Adapter for even Wider Spools.

Bambu P1S/X1C Extended to support up to 3kg spools Original: https://www.printables.com/model/655060

Pobrania
144
Polubienia
11
Ocena
0
P
Printablesmathewsamuel

Anycubic Mini Air Purifier Stand for Bambu Lab Printers - Wider & Taller - Left Side UPDATE

The Air purifier should now sit flush with the body of the X1 Carbon, giving you more space from the bed.

Pobrania
137
Polubienia
33
Ocena
5
P
PrintablesSEARS

Ikea UPPSPEL and SKÅDIS Drone fpv holder slightly wider version

Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame (Speedybee Master 5 V2) but was too tight to rest under the arms…

Pobrania
135
Polubienia
19
Ocena
5
P
PrintablesCapt_Napalm

Wider MLOK Railcover - 2 Slot w/ Diamond Grip Texture

Contoured 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…

Pobrania
133
Polubienia
23
Ocena
5
P
PrintablesRobert

Update thicker and wider plus longer pin bambu cardboard and small spool ring bambu lab ams

This filament holder is multifunctional. You can use it for a cardboard spool but also for a small one I hope it will help you I must say that I have not yet tested the nut and pin, but I have tested the spool holder this is especially…

Pobrania
132
Polubienia
15
Ocena
2
P
PrintablesBASt

eSun HIPS (and more?) wider roll rings for Bambulab AMS

Most eSun rolls will fit in the AMS. Especially the black rolls However, the clear plastic eSun HIPS rolls are rolled to the brim and therefor interfere with the filament entry in the AMS. A riser doesnt work here, as this only brings it…

Pobrania
131
Polubienia
18
Ocena
0
P
PrintablesMatthew

USB Logitech Unifying/Nano Receiver Keychain w/wider hole

A remix of my prior USB receiver attachment with wider holes allowing for a narrower metal loop.

Pobrania
131
Polubienia
4
Ocena
5
P
PrintablesDarkBrave

Wider Gridfinity Deburring Tool Holder (1x1x6)

I made this little 1x1 Gridfinity module to hold this deburring tool I found on Amazon and its ten extra blades. I based the module itself of the parametric Gridfinity modules Zack Freedman provided on his initial Gridfinity video . I…

Pobrania
131
Polubienia
12
Ocena
0
P
PrintablesFrederoo

Wider 1.9" 12mm hex RC beadlock rims

A remix of the neat 1.9" 12mm hex RC rims that use an internal beadlock design to clamp the tire to the rim. Included are only my favorite bead ring as you can reuse the original ones if need be (go check out the original design, it's…

Pobrania
130
Polubienia
23
Ocena
0
P
PrintablesChris Hill

MK4 x-carriage with wider cable channel

When swapping complete nozzle assemblies on the MK4 it is necessary to remove the thermistor and heater cables from the cable channel in the x-carriage, and then feed the replacements into this channel. The opening of the cable channel is…

Pobrania
127
Polubienia
27
Ocena
5
P
PrintablesNigel W
Pobrania
126
Polubienia
14
Ocena
0
P

Wider Pencil Box - Print in place.

This is a wider version of pencil box by @YogiTech. All print parameters are the same, no supports, some bridging. Space on the inside in: Length: 190mm Width: 70mm Height: 19.8mm

Pobrania
124
Polubienia
11
Ocena
4
P
Printablesjwyse

Wider Voron 0 Screw-Fit DIN Cleats

This is a simple remix of Geoff's screw-fit DIN cleats for the Voron 0, extended so that controller boards can be mounted further from the center / closer to the edges of the back panel to make room for a cable duct + Klipper Expander…

Pobrania
124
Polubienia
23
Ocena
5
P
PrintablesMediaMan3D

Makerbot Robot - weaponized & wider joints

I blended the widened hip, knee, and ankle joints of the Maker Faire Robot remix from tuxcat to include the weapons from steveweber314's remix: http://www.thingiverse.com/thing:841695 http://www.thingiverse.com/thing:454960 If you've got…

Pobrania
123
Polubienia
12
Ocena
0
P
PrintablesDoudnikov

Tech Deck Holder - Wider base

Remixed the model to have a larger base

Pobrania
122
Polubienia
12
Ocena
0
P
PrintablesPro Star

Biegvorichtung für Widerstände

Mit dem kann man die Wiederstände Biegen damit es beim Löten Schöner aussieht.

Pobrania
122
Polubienia
12
Ocena
5
P
PrintablesJascha

V2 ~0.4mm wider tolerance on female connector

TonieWabe +0,4mm - Modulares Regal für Toniebox-Figuren. TonieHive +0,4mm - Modular shelf for Toniebox figures.

Pobrania
118
Polubienia
16
Ocena
4,75
P
PrintablesWade Weppler

Wider handle for 6U Gridfinity Drawers, with better fit

Chipp's handle didn't fit the 6U remix ( https://www.printables.com/model/571092-6u-gridfinity-modular-drawer-system ) so I designed this. It's wider and the tabs fit more tightly. Add some CA across the whole handle and it should feel a…

Pobrania
116
Polubienia
18
Ocena
5
P
Printablescaste1200

HSW - Needle file holder (wider remix)

Just a remix to fit needle files with plastic grips. Print without supports

Pobrania
116
Polubienia
15
Ocena
5
P
Printablesalienryes

Pi4 SSD Case Base with Wider SSD socket

I just added some width to the SSD socket as my lead had a plug too large for the original opening.

Pobrania
114
Polubienia
18
Ocena
5
P
Printablesjg

Utility Blade Storage Module Gridfinity [v2] 2mm Wider

Originals tolerances were too tight when printed with my current .6mm nozzle setup, so I widened the blade area by 2mm (1mm each side). This model is a bit loose (but usable) for RapidEdge serrated utlility blades, but now fits the stock…

Pobrania
113
Polubienia
27
Ocena
5
P
PrintablesNorag

Slightly wider base

Increased the size to fit a desk with a thickness of 60mm.

Pobrania
112
Polubienia
10
Ocena
0
P
PrintablesDragoon

iphone wall mount - wider cable hole

This works with an iphone se 2022, i widened the power plug hole to allow for the 3rd party charger my wife uses.

Pobrania
106
Polubienia
9
Ocena
5
P
PrintablesA4O Labs

Octo-Chip-Clip (3x Wider!)

Triple G Workshop's Octopus Chip Clip … just a bit wider. A bit more than 3x. Enjoy!

Pobrania
105
Polubienia
17
Ocena
0