Liczymy pasujące modele…
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Wydruk około 7,95 €–9,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
This is a filament buffer and spool within an 'Ikea drybox 365+ 10.6 liter' for the MMU2s. I wanted my filament-spool, but also the whole route to my MMU2, in a dry and protected environment. So I designed a buffer within the largest…
Made in Tinkercad. with a view to use it as an amusement ride in my N gauge model railway running on Z gauge track. Modelled from a photo of the "Ajax" Saddle Tank steam locomotive, working at Chatham Historic Dockyard. An open topped…
Holders to center the honeycomb plate under the laser for the XTool D1 Pro. These holders fit inside the enclosure allowing the enclosure to sit flat on the table. I have also included 1 inch risers to lift the machine so that the height…
Fits factory charger for Scanwatch 2, secured by friction. Includes a path for routing the charging cable several ways.
I love these containers. We travel a lot for weekends and want to take beans with us. This is a compact way to pack them without needing to bring a big container. Re-upload of i0i0 model. Description straight from their Thingverse…
Hi everyone, This soap holder is from 2-components, printable just in 1 hour. Optimal printing parameters. Supports not necessary. Layer high 0.3mm Recomanded materials: PLA PETG Assembly instructions bellow: Put the “grid-support”-(2) on…
The charging stand is tested with the 42mm version, but it should work with the 38mm as well. It requires supports when printing. Leave a like if you like the charging stand! Print settings: supports required
Change History Update (4-06-26): (Optional) Added a blank analemma plate for those who want to experiment with their own analemma curves & text. Check the file folder: Blank Analemma Plate. Update (12-07-26): The file…
Adapter to connect regular arm bands to Withings Pulse HR fitness trackers
Change History Update (9-02-26): Fixed a tolerance issue between the hour plate & alidade. The fix is found under: PG_heliochronometer-hour_plate_assemblyv2.3mf & PG_heliochronometer-hour_platev2.stl Update (31-03-26): (Optional…
Fits factory charger for Withings ScanWatch Nova, secured by friction. Scaled and slightly adapted for ScanWatch Nova.
I had the problem that my robot vacuum cleaner constantly wanted to climb on the scale. The wall mount solves the problem. I have glued a bit of felt (from felt furniture gliders) in the holder, so the scale slides out and in nicely.
A foot and a center cap for the original Withing Smart Scale The center cap is a capacitive button originally but if you don't care about waking the scale up to only see the weather, you don't need it for it to work.
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Two part model, print the “ring” and “foot”. The ring which holds the charger itself snaps into place. Due to draft angles on the charger itself this can be tricky to put in, take your time to not break it. Once it is in it will hold very…
Name: Fidget Elevator: a mechanical curio curiously without compliant parts Video: https://youtu.be/ji-E1huV4Js Printing Instructions: https://koolfingers.com/3d-prints/printing-elevators/ Ask anyone playing with a Fidget Elevator for the…
Feet on scale tend to break off and disappear. Can't buy them from Withings. Printed in ASA.
Tested with 38 and 42mm version requires support to print Leave a like, if you like it!
I cut out some smaller versions of the original inside this simple star.
Replacement foot for the Withings Body scale
This is the SOUTHERN HEMISPHERE VERSION. For the NORTHERN HEMISPHERE VERSION, please refer to this printable instead: Super Accurate Heliochronometer Sundial - 2025 by 3DMason | Download free STL model | Printables.com The northern &…
Hi everyone, This cable clamp-support it's printable just in 18 min. Necessary to insert 2-3mm wide cable ties and it's allready for fixing wires. Standard printing parameters. Supports not necessary. Layer high 0.2mm Recomanded…
You can print it without support. 3 walls with 10% infill :)
Spinception ! 3 spinners within a single one, Inception-Spinner ! This was made using 625ZZ for the center and MR115 for the 3 others with 8mm exa nuts. Still work in progress Print part 1 x 2 and part 2 x 3 You can use glu or not, depend…
Introducing the PocketCatch, the ultimate solution for keeping your essentials organized and in one place. Made from sustainably sourced plastic, the PocketCatch is not only eco-friendly but also durable and long-lasting. The catch…
Usually, I needed my Withings BPM connect or my Withings Thermo I was lying in bed and was too lazy to get up ;-) So, I designed this mount for a bed or wall (I simply used power strips to attach). Since there was still room in it, I also…
A simple remix of honei's BPM Connect and Thermo holder. I don't have a thermo, so I took the model, sliced it up in Tinker CAD to use the side that was sized for the BPM connect itself. I also added a small screw hole on the back for…
I printed this plan and realised it didn't fit my Withings scan watch, so I took the inspiration from the plan and designed my own stand. Made this plan , but it had some flaw so I create a new one which work perfectly! Its made of two…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
A split-form transformation figure showing one side as human and the other as a hulking monster breaking through. Prints in two parts that press fit together, so no AMS is required for the two-tone look. Tree supports are required. The…
Case for the Withings BPM Connect blood pressure meter with sliding lid. The lid locks in place with a small lip. There is also a lid part without the logo added in case you want to use the box for other cases: The inside is roughly…
This is an extremely simplified version of Circle Packing algorithm for filling the area of a circle with other circles. It by no means is anywhere near as complicated or accurate as real-world circle packing algorithms and I'm sure could…
A stand for withings steel hr smartwatch Print Settings Printer: Darky-pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: PLA PRO PLA gray Category: Accessories
Holder for my scale to hang under the washbasin commode. Print one of them mirrored.
Hi everyone, This organiser is from 5-components, printable just in 1 hour. Printed in 2 colours (You can use your favorite colours). Optimal printing parameters. Supports not necessary. Layer high 0.3mm Print time 59 min. Recomanded…
The Withings Body Scan scale has a retractable handle that can be mounted using an included adhesive wall mount. However, the wall mount that comes with the unit uses a strong adhesive strip that will potentially pull paint off a wall and…
For mounting the Buddy3D camera within the enclosure, a small bracket has been designed and tested.
A simple dice holder to allow you to carry up to 27 standard dice inside. the file requires 4 3mmx2mm magnets to hold the lid on and can be finished by painting the dice numbers to make it stand out more When printing you will need to…
Chargeur pour scanwatch couplé avec un chargeur pour téléphone. J'ai aussi ajouté un modèle sans le chargeur pour téléphone
This is a mount for the Withings / Nokia Home camera because it doesn't really come with one. This has opening for all of the ports at the back of the camera and even openings on either side for the microphones on the camera. I have…
Fits factory charger for Steel HR. Meant to holds by friction, but at least on my own printers and slicers I have notices that the quality of the friction fit depends somewhat on the printing orientation.
The feet on the Withings personal scale are weak. This design is better than the original.
sind it was missing i made an additional model
The first 47 digits of Pi inside the Pi symbol inside a Pie. This model was published on 3/14 at 1:59pm (the first 6 digits of pi) [I may have miscounted so I originally thought there were 50 but there are only 47 :( ] Note: Depending on…
Created this to replace my broken Withings Go Clip
This piece is a collage between "Once Upon A Time" bookmark by @Ninomalbinho and some random picture frame. It can be used to conceal wall or door imperfections. Looks and works very well when hanged on your kids bedroom door as sort of a…
Handle wall holder for Withings Body Scan to be screwed to your wall. I did not trust the glue tape variant that was included with the scale for the long term. So I made this one to be fixed with screws to your wall. Parts needed: 2x…
I printed this plan and realized it didn't fit my withings scan watch, so I took the inspiration from the plan and designed my own stand. If you print it, and it works for you, please rate it and post a make, that would be highly…
A really simple model - a set of simple framing corners for the Withings Body+ scale, to keep the scale in one place (my Roomba likes to push the scale around). I used 3M 111 primer to improve 3M VHB tape adhesion to my PETG filament…
Hang your Withings under a PC monitor and keep your desk clean! Fits to: Withings Steel HR 36mm Geniue USB Charger What you need: Printed STL parts Superglue Double-sided tape (10mm VHB tape is preferred) Steps: Print STL parts Fix two…
A replacement clip for the original Withings Pulse Wristband. Basically all you need is a Withings Pulse as well as a generic watch band. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: Yes Infill: Yes…
A simple double hook that hangs over an oval closet rod to instantly add two extra hanging spots. Perfect for keeping handbags off the floor and easy to grab. Description A clean, practical organizer for your wardrobe: just slide it onto…
This 3D-printable design solves the age-old problem of misplaced TV remotes. Simply print the mount, attach it to the underside of your coffee table or end table, and slide your remote securely into place.
A mount for a standard (Wi-Fi) surveillance camera with a 73mm diameter base and rotating camera head. A cutout in the frame allows for the connection of the power cable to the camera base. You can attach the mount directly to the inner…
Plastic feet for extruded aluminum outdoor furniture from Design Within Reach - LUCCA model that is no longer produced and they no longer provide replacement parts or support. I recommend printing 100% infill and in something UV resistant…
https://www.flamark.hr/en/products/mabo/ Printed with 0.2 layer height and a “fake” layer instead of supports.
I was playing around with Tinkercad and created this ball within a square within a circle. Printed in PETG on a WUXR- WXR
Since the Body Scan 2 didn't come with a wall mount for the handle I decided to create one. I built it as two parts to make it easier to print without supports. I printed them on my Core One+ with the ".20mm Balanced @COREONE HF0.4" print…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Vacuum Pump Holder for IKEA SKÅDIS — Keep Your Filament Storage Pump Within Reach If you store filament in vacuum bags, you already know the pump is always somewhere it shouldn't be. This holder mounts directly onto your IKEA SKÅDIS…
My robot vacuum pushed my Withings scale against the wall and I feel like that could impact its measurements. This spacer fixes that. Not really groundbreaking complex, just a simple clip that goes onto the feed of the scale and spaces it…
This comes from the most pivotal moment of the Tony Robbins event Unleash The Power Within. It's about reclaiming oneself from all the garbage thoughts that we all experience and the knowledge that we are not our thoughts and that those…
USE PRINT PROFILE PROVIDED Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup - Infill: 100%…
Withings watch charging station has a spot for the charging dock and a hollow core for storing the USB cable. The USB part can be pulled out of the station without releasing the whole cable, giving a more organized look while keeping…
This is an Ikea Skadis stand designed for a Withings Scanwatch 2 and its charger. Usage is pretty simple- pop the charger into the bottom recess and hook onto your Skadis. Print settings are flexible but unfortunately you do need to…
LHW 1 · Rev. A – Wandhalterung für den Handgriff der Body-Scan-2-Waage Der Handgriff der Withings Body Scan 2 hängt nach dem Messen am Kabel herum oder liegt am Boden. Mit diesen beiden Halterungen hat er einen festen Platz an der Wand:…
Meet TidyOrb™ — where cable chaos meets spherical serenity. Engineered as a seamless union of form and function, TidyOrb™ is your minimalist cable dock disguised as a smooth, futuristic orb. With a precision-cut internal groove and a…
die empfindlichen Kanten der Glasplatte der Withings Body Smart Waage können auf harten Badfliesen schnell brechen. 4 der Teile ausdrucken. Waage umdrehen, die kleinen Bumper um das Füßchen legen und über den Rand drücken. Ich habe meine…
The Watch Stand – Compatible with Withings ScanWatch Nova The Watch Stand is a 3-part 3D printable stand compatible with Withings ScanWatch Nova. The stand consists of a base plate with extra slots for rubber feet or pads, a support stem,…
English: Repair Kit for Withings Body+ Scale – Restore Body Composition Analysis This repair kit is for the Withings Body+ scale , for cases where the body analysis function (measurement of body fat, muscle mass, and water content) is no…
A space-saving, under-desk/shelf pull-out drawer mount designed specifically for the Withings Body Scan and other large smart scales with handles. It keeps your floor clear while keeping the scale easily accessible. Key Features &…
“I am the architect of my own destruction.” Prince of Persia - Warrior Within Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear. Low Material…
Handle Wall Mount for the new Withings BodyFit.
Change History Update (4-06-26): (Optional) Added a blank analemma plate for those who want to experiment with their own analemma curves & text. Check the file folder: Blank Analemma Plate. Update (12-07-26): The file…
A simple double hook that hangs over an oval closet rod to instantly add two extra hanging spots. Perfect for keeping handbags off the floor and easy to grab. Description A clean, practical organizer for your wardrobe: just slide it onto…
This is an Ikea Skadis stand designed for a Withings Scanwatch 2 and its charger. Usage is pretty simple- pop the charger into the bottom recess and hook onto your Skadis. Print settings are flexible but unfortunately you do need to…
Holder for my scale to hang under the washbasin commode. Print one of them mirrored.
A split-form transformation figure showing one side as human and the other as a hulking monster breaking through. Prints in two parts that press fit together, so no AMS is required for the two-tone look. Tree supports are required. The…
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
Change History Update (4-06-26): (Optional) Added a blank analemma plate for those who want to experiment with their own analemma curves & text. Check the file folder: Blank Analemma Plate. Update (12-07-26): The file…
MODEL This model is a fan art of the Lion Sword from the videogame Prince Of Persia Warrior Within modeled entirely from scratch using official artworks, concept arts and in-game screenshots as reference, with details and some…
