Wyniki wyszukiwania: woodworking

Sortowanie

223 modeli

P
PrintablesGiando

Solid Woodworking Marking Gauge

This is a woodworking marking gauge, the only thing you will need to add is a 40mm socket head bolt and an hex nut. For the long body I suggest to use Brim to ensure the adherence to the printer bed. The tool in the image is printed with…

Pobrania
7123
Polubienia
3158
Ocena
4,77
P
PrintablesExtrutim

Tetrahedron To Help Surface Treatment | Painters Triangle | Woodworking / Paint Cones

A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…

Pobrania
5406
Polubienia
1373
Ocena
4,93
P
PrintablesEttil Vrye

Parametric woodworking marking-gauge /w fast-lock

This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…

Pobrania
4884
Polubienia
1798
Ocena
4,88
P
PrintablesSovey

Saddle Ruler Square with marking holes for woodworking inches

This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…

Pobrania
1970
Polubienia
701
Ocena
5
P
PrintablesRestoreDoctor

Angle / Corner Clamp woodworking

Hardware: 4 x M10 nuts (self locking) 1 x M10 Washer 1 x threaded rod M10 - 200mm lenght Threadlocker Settings: 0.20mm Standard +custom settings: Wall loops: min. 5 Outer wall: 25 mm/s Infill 30 % supports are not necessary ABS / PETG…

Pobrania
1715
Polubienia
909
Ocena
5
P
PrintablesMartin Th.

Woodworking marking gauge and ruler

Ruler and marking gauge in cm/mm for woodworking. Comes in two lengths 10cm & 20cm with a hole at every mm. Background Searching for a ruler solution to marking wood before cutting, I found the model I remixed. Rebuilt the model from…

Pobrania
1643
Polubienia
409
Ocena
4,85

Featherboard for woodworking, no supports needed, with 1/4", M5, & M6 options for knobs & track slides

You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…

Pobrania
1606
Polubienia
377
Ocena
4,89
P
PrintablesGarage Maker

Router Base (Woodworking)

When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…

Pobrania
1589
Polubienia
96
Ocena
5
P
PrintablesBuildModHack

Corner Radius Jig Router Templates, Router Templates for Woodworking 7 Pcs Set

(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…

Pobrania
1588
Polubienia
339
Ocena
4,82
P
PrintablesIvan Yovchev

Woodworking Knobs for Jigs

In the woodwork shop we often need knobs to finish some Jigs. They can be very expensive so I dicided to print them on my Bambulab A1 3D printer. Aded metric M4 Bolt or Nut with 3 diferent diameters of the body - D20 , D 25 , D 30 Aded…

Pobrania
1424
Polubienia
678
Ocena
4,67
P
PrintablesSovey

Saddle Ruler Square with Metric marking holes for woodworking

This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…

Pobrania
1402
Polubienia
457
Ocena
4,86
P
Printablesdevincody

Sanding Mouse for Woodworking 5in Disk Sandpaper

I printed with 40% infill ABS for better structural rigidity and heat resistance.

Pobrania
1277
Polubienia
313
Ocena
5
P
Printablesdrofmij

UPDATED! V2 Base - Setup Blocks for Woodworking Power Tools (Imperial measurements)

**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…

Pobrania
1171
Polubienia
171
Ocena
4,8
P
Printablescewo

Corner Square for Woodworking

This little helper is often made from aluminium or quickly done with wood. However, I printed a bunch of them to be used with small clamps. Two sizes: 123x123 mm and 79x123 mm Print settings: No fill and no top and bottom layers, only…

Pobrania
1114
Polubienia
272
Ocena
5
P
PrintablesNever0dd0reveN

Woodworking F Clamp Holder

A simple holder for F clamps. Holds 4, 6, or 8 clamps and features holes to screw it to the wall. I print these with 3 walls for extra strength and 20% infill seems to be enough to hold even the heaviest of my clamps. Print Settings…

Pobrania
823
Polubienia
147
Ocena
5
P
PrintablesDiário Maker

Center Finder for Woodworking

This is a center finder for woodworking. With pencil holder and magnets for fixing. Printed on Creality K1C 300mm/s Infil 15% Required items: hexagonal pencil 3x 5mmx2mm round magnets

Pobrania
791
Polubienia
242
Ocena
5
P
PrintablesPurduesi

Woodworking Spacers / Gauges / Setup Blocks - Imperial

Some Spacers / Gauges / Setup Blocks for woodworking. These are really useful when building cabinetry and other projects. In addition to the different thicknesses, all blocks have outer 1" x 2" dimensions so can be used as gauges for…

Pobrania
762
Polubienia
162
Ocena
5
P
Printablesphysicalzero

Woodworking Joint Bridge Clamping Pad

Nice little gadget to help with clamping wood pieces that you are gluing together. You will need to print four of these to properly clamp two pieces of lumber together that you are gluing up. I hope you get some use from these. I printed…

Pobrania
753
Polubienia
156
Ocena
5
P
PrintablesPeter H

WOODWORKING CHISEL SHEATH (PARAMETRIC)

I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…

Pobrania
724
Polubienia
228
Ocena
5
P
Printableskingmob

Woodworking Setup Blocks Metric

Simple setup blocks for woodworking in the Metric system. Several common types of wood thicknesses (6mm, 12mm, 18mm) are included as well as more generic ones. I included 1.45mm because that is the thickness of my saw blade. Blocks can be…

Pobrania
658
Polubienia
154
Ocena
5
P
PrintablesDarrick

F Style Woodworking Clamp Stand

Simple stand to hold F style woodworking clamps on your bench with an included countersunk hole to allow mounting for an assembly fixture or something like that. Printed with .6mm nozzle and three perimeters and a 20% infill. No supports…

Pobrania
629
Polubienia
125
Ocena
5
P
Printables_Alexis_

Parametric woodworking marking-gauge (for 26mm ruler REMIX)

Parametric woodworking marking-gauge (for 26mm ruler REMIX) need small nail Print Settings Supports: yes is better Resolution: 0.2mm ------ Happy Print to the whole community :)

Pobrania
621
Polubienia
129
Ocena
5
P
Printablespex

Square / angle checker for Woodworking (45 and 90 Degrees)

1 x 45 degrees angle checker 1 x 90 degrees square Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: Prusament PLA Grey Notes: Any material does the trick. Category: Hand Tools

Pobrania
617
Polubienia
64
Ocena
5
P
Printablesdevincody

Woodworking Router Plane

Router plane for woodworking joinery. BYO-chisel. Inspired by a youtube video by Rex Krueger: https://www.youtube.com/watch?v=-FdA0ImXjbI&t=2s&ab_channel=RexKrueger I printed 40% infill ABS for the router base and 40% infill PETG for the…

Pobrania
585
Polubienia
236
Ocena
5
P
PrintablesKen226

Small Metric Woodworking Square 100x75x75mm

A small, metric woodworking square. Print in whatever material you like, using any infill amount you like.

Pobrania
497
Polubienia
71
Ocena
5
P
Printablestheworkshope

Woodworking Push Block

Adjustable push block for woodworking table saw work down to 1/4" strip. I sacrificed a few extra features to keep it simple and easy to build. I printed the slider and handle from ABS-GF for some extra strength, but all the main parts…

Pobrania
494
Polubienia
201
Ocena
5
P
PrintablesEttil Vrye

Parametric Assembly Square for Woodworking

This a parametric assembly square to be sure you assembling your parts square. You can define your length, depth and height as you want. I needed them to keep two surfaces square during the assembly using pocket-holes. I printed two of…

Pobrania
488
Polubienia
123
Ocena
5
P
Printablesmadsi1m

Woodworking Marking Gauge Tool REMIX (100% printed, no bolts)

This is a remix of the very awesome Woodworking Marking Gauge Tool https://www.thingiverse.com/thing:2851783 I wanted to make this without any bolts so here is my remix. I have also added an adapter for a brad nail which works better than…

Pobrania
479
Polubienia
118
Ocena
3
P
Printablesgexgecko

Clamp-It Clips 3 and 4-way intersection 3/4 inch woodworking clips

This quick remix of nimel's great Clamp-It Clips adds: 3-way intersection for 3/4 inch boards 4-way intersection for 3/4 inch boards Slightly rounded facing corners to make it easier and cleaner to fit the clamps in place view-holes so…

Pobrania
431
Polubienia
109
Ocena
5
P
PrintablesEmk

Woodworking Joint Bridge

While there's a handful of existing joint bridge models, I didn't find one that met my requirements, so I created this model. Printed using PLA w/ supports and 3D honeycomb infill.

Pobrania
430
Polubienia
94
Ocena
5
P
PrintablesSualpOzel

Woodworking Corner fillet tool

If you want to learn how to remix models you can find on printables.com or how to prepare them for 3D printing with Autodesk Fusion, check out my book: “3D Printing with Fusion 360” on Amazon: https://a.co/d/5ztftox Packt website:…

Pobrania
424
Polubienia
205
Ocena
5
P
Printablesfymetool

Woodworking Measuring Contour Gauge

This measuring tool makes cutting and measuring easier, and is suitable for floor laying, carpet cutting, tooling and so on. Needed additionally: 2x M5x30 countersunk screws 2x M5 nuts

Pobrania
411
Polubienia
83
Ocena
5
P
PrintablesLudoM

Woodworking Marking Gauge Tool

Remix from this design on thingiverse : https://www.thingiverse.com/thing:4569034 I started this remix because I had quite many broken carpenter meters at hand (like many of you I suppose). Minor adaptations of the initial design: adapted…

Pobrania
398
Polubienia
141
Ocena
5
P
Printablesusername1234

Woodworking Clamp Rack Bracket

I needed some clamp racks and i couldnt find one that used a dowel that i liked so i designed this one works pretty good, the best part about it is you can make it as long or short as you want since by cutting the dowel to whatever length…

Pobrania
365
Polubienia
173
Ocena
4,5
P
Printablesndom91

Woodworking Setup Blocks (Metric)

Update: Added new profile that adds two updates. First, it also has the brim ears on 2mm, 3mm, and 4mm blocks to help improve the printing of those "cantilevered" thin pieces that have a tendency to warp. Second, it has labels imprinted…

Pobrania
356
Polubienia
81
Ocena
5
P
PrintablesMartin

Woodworking T-Square Hole Scribe Precision

Size: The holes body: Length*Width=110*38 mm; Length*Width=70*20 mm; Easy install Click - NO Bolt, Nut, superglue!

Pobrania
353
Polubienia
94
Ocena
0
P
PrintablesRaptor_50_Titan

WOODWORKING SMART RADIUS CORNER SET

This is a set of Corner Radius templates from 3" - 8". This set is designed to be used with 3/4" wood. Works great if you have a router but can be done manually with a Jig Saw / Scroll saw but with a bit more finish work. May add a 1/2"…

Pobrania
342
Polubienia
98
Ocena
0
P
Printablesabllatif

Center Finder Woodworking

It can find the center of diameters up to 200 mm. No support is needed to print. No tolerance is added please use your trusted settings for horizontal compensation etc. based on your printer.

Pobrania
335
Polubienia
68
Ocena
0
P
Printablesmkd

Corner bracket for woodworking

I made this corner bracket to add strength and rigidity to my printer table. Parts needed: 4mm*25mm sunk head self-tapping wood screw - 4pcs/support Material: PETG Support: No Wall layers: 8 Top/bottom layers: 7 Layer height: 0.28/0.3…

Pobrania
330
Polubienia
81
Ocena
5
P
PrintablesAH - X1C

Featherboard for (woodworking) router table or workbench

Wanted a simple featherboard for my workbench router and decided that it was better for me to print rather than buy. Fusion 360 files included (but it can get messy when resizing.) I probably could have made the model 1mm thinner and…

Pobrania
320
Polubienia
138
Ocena
0
P
PrintablesHappyAtom

Hex Spade Drill Bit Holder Woodworking Tool Organizer

Drill holes to mount to a vertical surface. Use pan-head screws.

Pobrania
317
Polubienia
85
Ocena
0
P
PrintablesWHerzog

Benchhook / Planestop / Benchdog for Woodworking

This is a Bench hook for use in any workbench like the Black&Decker Workmate or the Festool MFT. I provide the data for two different types of bench hooks: version with a 3/4 inch shaft for use in US-style benches version with a 20mm…

Pobrania
308
Polubienia
77
Ocena
4,33
P
PrintablesAH - X1C

Featherboard v2 for (woodworking) router table or workbench

Wanted a simple featherboard for my workbench router with a a useful amount of adjustment for wider pieces of stock. Fusion 360 files included (but it can get messy when resizing.) I added slots for M4 hardware for use on the flat surface…

Pobrania
307
Polubienia
127
Ocena
5
P
PrintablesTD3D

Linealanschlag, marking gauge, woodworking

Das verwendete Lineal hat eine Größe von 25,8x0,82mm, es sind auch noch weitere Größen zum Download verfügbar. Gerne werde ich auch auf Anfrage noch weitere Größen anbieten. Der Drucker sollte kalibriert sein, um eine genaue Passform zu…

Pobrania
301
Polubienia
51
Ocena
5
P
Printablesendoril

Gauges / spacers set for woodworking mm (Parametric - .scad file included)

These gauges are pretty common, but only in the US ? In Europe, it is very hard to find them, and all seems to be in imperial units. I have made this set to handle the issue. You will find STLs for: 2 to 9mm by 1mm increasing steps 10 to…

Pobrania
296
Polubienia
57
Ocena
4,67
P
PrintablesMike @pix2proto

Foot Offset Jig Template - Woodworking, Cutting Boards - Pixels to Prototype

Offset Jig for quickly positioning and drilling holes for cutting board or woodworking projects. Holes at 1/2" increments from 1/2" to 3". Check out pixelstoprototype.com for projects or to purchase a physical print!

Pobrania
290
Polubienia
60
Ocena
5
P
Printablesmaxelman

Positioning Square for Woodworking

Resize in slicer. I use 150x150x20

Pobrania
289
Polubienia
68
Ocena
5
P
PrintablesAlex Crow

Glue Roller for Woodworking

Faster and more effective way to spread adhesive than traditional brushes or rollers. This custom solution proved to be the perfect answer, allowing for rapid, even application of glue across wide surfaces. And, in a fun twist, it turned…

Pobrania
286
Polubienia
115
Ocena
0

Bowtie Template For woodworking

Works with any type of filament. No Supports needed. Infill: 10-50% This template helps you cut perfect, reliable bowties out of wood (or other materials) easily! It can work with a router or even as a template for hand cutting bowties.

Pobrania
286
Polubienia
76
Ocena
0

Center finder - Center marker for woodworking

Center finding tool for carpentry, woodworking or your shop fast and easy print Printed with PLA, 0.3 layer 20% infill Dislaimer: You are not authorized to sell prints/derivates based on my model. I shared this model only for your…

Pobrania
285
Polubienia
31
Ocena
0
P
PrintablesJacques Mostert

Woodworking corner clamp collection

A collection of corner clamps for woodworking with variations for bench dogs and MFT's. Collection includes: 180mm and 130mm corner clamps Variations with support/alignment for inside and outside corners Variations with single 19mm and…

Pobrania
261
Polubienia
73
Ocena
5
P
PrintablesNicoConex

Multi-function woodworking tool (saw guide, ruler, square)

A multi-function woodworking tool (for left and right handed) scribing ruler 22.5, 45, 67.5 and 90 degree square saw guide for cutting at 22.5, 45, 67.5 and 90 degrees The saw guide is particularly suitable for Japanese saws (kataba style…

Pobrania
237
Polubienia
99
Ocena
0
P
PrintablesOrlando PB

Gridfinity Mega Woodworking Drill Bit Organizer (5x1)

Background: This design fits a 1x5 Gridfinity mount. This Model holds 3 of each common drill bit size, as well as a hex for each. Sizes in mm are: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10. There are also extra size 6 & 3.5…

Pobrania
233
Polubienia
69
Ocena
0
P
PrintablesIvan Yovchev

Center Finder Jig Woodworking

Usefull to mark the center of wood or enything else. Maximum range of 135 mm. No additional hardware required! Professional Carpenter's Pencil Set with Built-In Sharpener - you can bay it from online shops. My design based on the idea of…

Pobrania
224
Polubienia
71
Ocena
5
P
Printablesfryc88

Rubber TPU pads for woodworking clamps

A while ago I purchased online some cheap woodworking clamps. One of them has snapped & I lost that bit, found model already to print, but I also lost rubber anti slip pad, so I have designed same one to print from TPU. I have used TPU…

Pobrania
220
Polubienia
88
Ocena
5
P
PrintablesWilliamWill3D

Butterfly Inlay Woodworking template 5 sizes

5 Sizes of butterfly inlay templates for woodworking. Ideal to use with flush cutter. Just screw them to a piece of wood and cut a bigger tenmplate. 128mm 89mm 59mm 48mm 37mm

Pobrania
218
Polubienia
65
Ocena
0
P
Printablesmh_3DSolutions

Reinforced 90° Angle Bracket | Strong Corner Support for DIY & Woodworking (No Supports)

A reinforced 90° angle bracket designed for strong and reliable corner connections in DIY, woodworking, and workshop projects. This reinforced 90° angle bracket is designed to provide strong and stable support for corner joints and…

Pobrania
217
Polubienia
72
Ocena
5
P
PrintablesFrick

DustLock - Woodworking Dust Collection Twist Lock Mechanism (4")

This is a two-part system for 4" dust collection found on most woodworking power tools. The pieces are easy to print and create a soft locking mechanism that allows you to quickly transfer from one tool to another but still get a positive…

Pobrania
216
Polubienia
44
Ocena
5
P
PrintablesJEO

Woodworking Glue Bottle Opener

Trying to pull the top open on a previously used bottle can be difficult. This will lift it up easily with leverage. It will slide in and work either direction (as pictured). There is an 8mm hole in the handle for hanging or a 10mm recess…

Pobrania
215
Polubienia
60
Ocena
5
P

90 Degree Corner Woodworking Jig

This tool is designed to make your woodworking projects a breeze, allowing you to achieve perfect 90-degree angles.

Pobrania
211
Polubienia
17
Ocena
0
P
Printablestsarrrstudio

Gridfinify - 90 Degree Positioning Squares Right Angle Clamps Woodworking Carpenter Tool

Gridfinify - 90 Degree Positioning Squares Right Angle Clamps Woodworking Carpenter Tool Holds 4 x Positioning squares and additional storage in the center

Pobrania
210
Polubienia
36
Ocena
0
P
PrintablesJareq

Woodworking T-type (90°) clamp for 18mm plates

T-style clamp for 18mm thick plates. 3-Way 90-Degree Helper

Pobrania
207
Polubienia
36
Ocena
5
P
PrintablesZerthron

Metric Spacer/Gauge Block Set/Woodworking Shims with Gridfinity combatible Box

I made this simple Gridfinity Box with Metric Spacer/Gauge Box in 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm thickness. I colorcoded each Spacer and also labeled them with white numbers. Each Spacer also has the corresponding radius on…

Pobrania
201
Polubienia
43
Ocena
5

Assembly Square - woodworking

A durable assembly square designed for precise 90-degree alignment during woodworking, cabinet making, and other joinery projects. Features stepped edges for versatile positioning, multiple clamping points, and lightweight construction…

Pobrania
198
Polubienia
39
Ocena
5
P
Printablesgrond

Woodworking Marking Square

Marked in eighths and sixteenths. Holes are sized for Pentel Graphgear 1000 .9mm or smaller. Uses M3 bolts for assembly, or you could print the STL in a complete piece if you felt daring and didn't mind a ton of support material. I…

Pobrania
196
Polubienia
62
Ocena
5
P
PrintablesSablebadger 3D

Marking Gauge - Traditional Woodworking Tool

In addition to 3D printing one of my hobbies is "traditional" aka Hand Tool woodworking. One of the tools that I use a lot is a marking gauge, and it never hurts to have extra around. So I thought I would model it up and see how well it…

Pobrania
193
Polubienia
51
Ocena
5
P
Printablesgexgecko

Woodworking Metric 'T' Scriber for easy drilling and cutting offset lines (only 10g filament!)

This Metric T-scriber allows you to draw a parallel line to a workpiece for drilling or cutting distances from an edge. cm on long axis, mm on short axis Usage: 1. Align the edge with the workpiece, text up 2. Insert a pencil into the…

Pobrania
193
Polubienia
47
Ocena
5
P
PrintablesMiGarro

Clamping Jaws for Woodworking bench with 20mm holes

I printed this part in PETG with a resolution of 0.2mm and supports just touching the buildplate. The piece must be printed lying down to have more resistance. I have attached some pictures of the slicer so you can see how it was printed.

Pobrania
191
Polubienia
79
Ocena
5
P
PrintablesRPR Designs

Heavy-Duty Woodworking Small Clamping Square

Achieve perfect 90-degree corners every time with this Heavy-Duty Clamping Square series. Unlike basic squares, this design features internal reinforced ribbing , providing maximum structural rigidity while remaining lightweight and…

Pobrania
188
Polubienia
18
Ocena
4,67
P
PrintablesGeert

Customizable & Parametric Bench Dogs for Woodworking

I've removed the metal reinforcement option since it's not needed and I've ruined too many cutting edges on it. These are printed in PLA, slice with 100% infill on the head joint (see the included 3mf).

Pobrania
186
Polubienia
58
Ocena
0
P
PrintablesMartin Th.

XS Woodworking marking gauge and ruler 1-55 mm

Ruler and marking gauge in cm/mm for woodworking. New version with 1-55mm and more compact in other dimensions as well. Check out the full size versions here: https://www.printables.com/model/359539-woodworking-marking-gauge-and-ruler The…

Pobrania
185
Polubienia
72
Ocena
5
P
PrintablesSirrGalahaad

Woodworking Magnetic Couplers

A few woodworking couplers for the DIY minded. 4 inch dust collector main hose coupler. Coupler with reduction to 2.5 inch Coupler with reduction to roughly 43.5mm 4 inch to 2.5 with a 45 degree sweep 4 inch to 1.5 4 inch to 2.125 Use…

Pobrania
181
Polubienia
88
Ocena
0
P
PrintablesPEMP

Woodworking ruler wall rack

Prints vertically without supports. I used PLA.

Pobrania
165
Polubienia
42
Ocena
5
P
PrintablesFrick

F Style Woodworking Clamp Holder

A simple holder for F-style woodworking clamps. Included is a countersunk hole in the back of the design for easy mounting to a shelf or other wood system. I use this design with a number of F-style clamps. Print multiple and you can just…

Pobrania
164
Polubienia
28
Ocena
0
P

T-track End T-bolt Insert - Woodworking - FAST PRINT

T-track End Insert Save your valuable t-track stock. Perfect for woodworking jigs, sleds, assembly tables, CNC, downdraft or other work table tops. This convenient end insert allows for a clean solution for you to drop your t-bolt or hex…

Pobrania
163
Polubienia
44
Ocena
0
P
Printablesjflick

Woodworking machine 4" to 2 1/2" vacuum adapter

I made this for my Jet band saw to adapt the 4" port to 2 1/2" shop vac hose. 3.953" ID x 2.288" ID Blender file included in case someone needs it.

Pobrania
161
Polubienia
37
Ocena
5
P
PrintablesNiuthon

Saddle Square - Metal/Woodworking 3D square

Small but solid 3D square with ruler for metalworking and woodworking, especially convenient for square steel profiles. Arms are 60 mm long. Made for marking cuts on steel to weld. Print with at least 4 walls for sturdiness, and 20% infill.

Pobrania
159
Polubienia
43
Ocena
0
P

Vacuum Adapters for Woodworking

I hate cleaning up all the sawdust after doing projects for the house. So I decided to make a few adapters for my shop vacuum to catch the dust before it can be blown everywhere. The models that I have tested this with are: Shop-Vac Model…

Pobrania
156
Polubienia
71
Ocena
0
P
PrintablesXTramp

Woodworking Measuring Contour Gauge V2

Ich habe ein ähnliches, professionelles Tool gesehen und wollte selber ein ähnliches konstruieren. Dann habe ich dieses von @fymetool gesehen, das fast meine Erwartungen erfüllt. Ich habe es um ein 624Z-Kugellager ergänzt, damit man auch…

Pobrania
153
Polubienia
49
Ocena
5
P
Printablesqsuire

Woodworking doweling jig

I wanted to assemble furniture using dowels but I couldn't find any model that was accurate and sturdy enough to withstand the heat from drilling. This jig is designed to assemble 18mm panels with 8mm dowels. Making 1x jig 2x spacers 4x…

Pobrania
152
Polubienia
53
Ocena
5
P
PrintablesNozzle
Pobrania
151
Polubienia
34
Ocena
5
P
PrintablesRPR Designs

Heavy-Duty Woodworking Medium Clamping Square

chieve perfect 90-degree corners every time with this Heavy-Duty Clamping Square series. Unlike basic squares, this design features internal reinforced ribbing , providing maximum structural rigidity while remaining lightweight and…

Pobrania
151
Polubienia
13
Ocena
0
P
PrintablesWhoKnowsWho2

Various Dust Collection adapters for woodworking tools

Got tired of trying to hook up the 4" dust collector hose in my garage to various tools. Made a 96mm coupler for the hose to connect to a Ridgid R45171 Table saw (opening 63mm), Ridgid R4331 Planer that was used and missing the adapter…

Pobrania
150
Polubienia
47
Ocena
0
P
PrintablesSpani

Woodworking Square

Simple woodworking square to check 90 and 45 degree angles. Dimensions of print: 50mm x 50mm x 20mm Print Settings Printer: i3 MK2S Rafts: Doesn't Matter Supports: No Resolution: .35mm Infill: 15% Notes: I printed with small brim to…

Pobrania
145
Polubienia
45
Ocena
0
P
Printableskaje

1-2-3 Blocks (also Metric) - for Woodworking

1-2-3 blocks (metal blocks 1" x 2" x 3" in size, or metric 25mm X 50mm X 75mm) are commonly used in machining. Many woodworkers also use them as a convenient aid for spacing and supporting work. However, machinist 1-2-3 blocks are…

Pobrania
145
Polubienia
35
Ocena
5
P
PrintablesJB3Designs

Woodworking Project Brackets for 2x3 Lumber

A bracket to build woodworking projects like a 3D printer stand using 2x3 lumber. These brackets are strong, but they are not meant for large heavy duty projects. This design is based on many of these style brackets found in hardware…

Pobrania
140
Polubienia
65
Ocena
0
P
PrintablesCreativeRabbitt

90° Corner Clamp Adapter for Quick-Release Woodworking Clamps

An upgrade for universal quick-release woodworking clamps, adding adapters/attachments/clamping pads that enable clamping elements at a 90-degree angle . • Application: Very useful for assembling boxes, shelves, plexiglass sheets, wooden…

Pobrania
138
Polubienia
33
Ocena
1
P
Printablescommodore64

Woodworking jig - 2" rounded corner

2" Radius jig for rounding the corner of countertops or wood up to 1 ½" thick. Use with 1/16" router bushing and flush cut bit.

Pobrania
136
Polubienia
48
Ocena
0
P
PrintablesJouni Lindqvist

Remix Solid Woodworking Markin Gauge for Mechanical Pencil

Remix of Giandos modell for a 0.5mm mechanical pencil. The diameter of the pencil is 9mm. U need Giandos original “Central Body” and “Screw” models Printed in PLA, 3 walls, 35% infill, no supports or brim

Pobrania
132
Polubienia
48
Ocena
5
P
PrintablesNn

Woodworking Marking gauge

Redesigned Giando's wodworking gauge from scratch using Fusion 360 to accept a square carpenters pencil. Giando's original for round pencil here: https://www.printables.com/model/67670-solid-woodworking-marking-gauge Fusion 360 file and…

Pobrania
119
Polubienia
46
Ocena
0
P
Printablespoprhythm

Woodworking Marking Tools hangers for Wall Control

This uses the DDD Printable Wall Control System ( github ) to mount the marking tools. Here are the items that are fit for these mounts: MulWark 5" Spring-Loaded Center punch Narex Marking Knife Wheel Marking Gauge Pica-Dry Use the Angle…

Pobrania
118
Polubienia
39
Ocena
5
P
PrintablesVincent

Woodworking Ruler Set Wall Mount Hanger

Holds the set of three woodworking rulers commonly found on Amazon.

Pobrania
113
Polubienia
29
Ocena
5
P
Printablespadouk

Woodworking chuck rest M33x3.5

For M33x3.5 sized woodturning chuck, to rest it on the wall Print instructions Printed in ABS or ASA, reinforced with a 23 mm dovel (the chuck is quite heavy) glued inside the part Slice in 0.3 mm

Pobrania
111
Polubienia
23
Ocena
0
P
Printablesalexan_e

Parametric woodworking marking-gauge (for 15mm ruler REMIX)

Marking gauge remixed to fit my 15mm x 0.8mm ruler. I have reduced the slot width and increased the hinge radius by 0.2mm because the original one was not locking the ruler. Use a small nail or a wire to hold the hinge in place I have…

Pobrania
111
Polubienia
29
Ocena
5
P
PrintablesIvan Yovchev

Marking Gauge, Scribe Gauge for Woodworking

Multifunctional Marking Machine Wheel Marking Gauge Wood Scribe Tool Parallel Scriber Sliding Mark Scraper Adjustable Scriber. Adjustable Range 0-180 mm. You can use my models of Knobs : Metric M5 Bolt and M5 insert. Bearing : inside…

Pobrania
109
Polubienia
30
Ocena
0
P
PrintablesRPR Designs

Heavy-Duty Woodworking Extra Large Clamping Square

Achieve perfect 90-degree corners every time with this Heavy-Duty Clamping Square series. Unlike basic squares, this design features internal reinforced ribbing , providing maximum structural rigidity while remaining lightweight and…

Pobrania
109
Polubienia
13
Ocena
0
P
PrintablesPrintMills

Woodworking cabinet setup spacer block .75 x 1.5 x 2.5 inches

Use Case .75 x 1.5 x 2.5 inches Setup block for repeat work. I designed this over lunch to install drawer slides on repeat in the shop. I found myself needing 2 blocks per drawer slide install. I decided to add more holes so you could…

Pobrania
108
Polubienia
24
Ocena
0
P
PrintablesAndrey Savchuk

90 degree angle finder for woodworking

This is a remix of the 100 mm ruler but you can use it to find a right angle!

Pobrania
105
Polubienia
11
Ocena
0
P
PrintablesIvan Yovchev

Woodworking Router Templates / Corner Jig

In woodworking we often need to round corners and for this task we use templates . This jig have different templates with different radius which can be changed without using tools. You can easily add new templates with different radii.

Pobrania
104
Polubienia
36
Ocena
5
P
PrintablesRPR Designs

Heavy-Duty Woodworking Large Clamping Square

Achieve perfect 90-degree corners every time with this Heavy-Duty Clamping Square series. Unlike basic squares, this design features internal reinforced ribbing , providing maximum structural rigidity while remaining lightweight and…

Pobrania
101
Polubienia
11
Ocena
0