Ender 5 Plus Bed Level Test Print (350x350)
Very quick and easy bed leveling test. The squares are 20mm each placed on every corner and middle of the bed.
- Pobrania
- 2430
- Polubienia
- 62
- Ocena
- 4,75
Liczymy pasujące modele…
Very quick and easy bed leveling test. The squares are 20mm each placed on every corner and middle of the bed.
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
Sovol SV08 first layer test 350x350mm using the complete print bed and a single 0.2mm layer. With that you can really see if your 1st layer is OK. =) IMPORTANT NOTE: You will need to remove the silicon brush (blue arrow) in the upper…
Collection of screws (ISO 4762 / DIN 912) including : M5x 6, 8, 10, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Hotwheels x IKEA x 3D printer. Introducing the Hotwheels Sannahed Insert display solutions. All you need to do is print 4x either the 10 or 12 rack for your frame insert. This will fit snugly into the frame and you can display 40 or 48…
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
Reinforced in blender and then edges hand smoothed/filleted with dynamic topo sculpting
Prints perfectly on 18cm beds. A bit tolerance added so it can accept a bit wider bottles. Uses same hooks as original file
dimensional test cube, it can calibrate printer and profile for optimal dimensions
75mmx350R Shell This Shell was used in the M4 Sherman Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re going to have a German 88mm (…
Key features Supports the original bolts and screws! Just as stiff as original (when printed correctly) Twice as heavy as original Easy to print without supports Tested print settings that work 3 perimeters 30%+ gyroid infill 0.2mm layer…
This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes on the right side that match the side vents of the Lenovo Tiny PC Bracket is secured to the card…
Hyundai ix35 trunk compartment cover clip
Corner motor bumper for happymodel crux35. Print in TPU and zip tie on. I left a window for a 2nd zip tie but it deformed the TPU too much for me. Not sure if they help but added them since I busted motors on a different quad. Made from a…
Collection of set screws (ISO 4028 / DIN 916) including : M4x 3, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
This mount holds the Runcam Thumb Pro camera on the Happy Model Crux35. I'd recommend printing in TPU with the camera mount facing up with the large flat side down. Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No…
Collection of set screws (ISO 4028 / DIN 916) including : M5x 4, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
Honeycomb storage wall for bed 350x350
Tough PLA is good PETG was bad And I recommend TPU
New version of my old knurled bottle for 2023. Much better design from what I have learnded over the years. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0.25 with 3 shells Notes: When you first…
A replacement for the stock seat recline knob in the Hyundai ix35. The original one in my car was getting janky, so I modeled a new one. It's comfortable to grip, holds up well, and you can print it in whatever color suits your interior.…
I dislike knife blocks with dedicated slots for each knife—they never fit what you have, and there's always a slot missing or an empty slot. So, I took a look at various designs out there and tried to come up with a solution that works…
Angle 40°. Version with mount above the camera stands, and version to use 20 mm holes. I printed with TPU-like filament with supports. P.S. Have not tried to connect GPS yet, will need soft serial for extra UART. P.P.S. Official guide…
print it flat, no supports needed. Print 2 included versions: 35 degree hard mount 10-50 degree adjustable mount
This is the first layer test I use for my larger nozzle. Prints a full layer at .32 thickness. Most of the other first layer tests are designed for .4 nozzle so slicing will result in no print... Print Settings Printer Brand: Creality…
Not the best model but it works. Maybe usb-c port hole need to be little bigger. Print with some TPU. I printed with TPU 96A and it's great. Good luck!
Knurled container
M10 screws with nuts, and added an M5 nut. To print the M5 screw, is it sufficient to scale it down by 50% from the M10
Repair Lock Pin for Honda Transalp 650 M10x35mm This 3D model is a direct replacement for the original fairing locking pins used on the Honda Transalp 650. It is specifically designed to repair or replace the side panel fasteners, which…
I present to you another maze, a little bit harder. This time a 35x35 corridor maze. In slicer, please scale the model by 1000 factor. The model has 3 parts: - the maze and the base - this is complete model (17.4 cm) - the maze (17 cm) -…
I have clients that keep on breaking the original knobs on their printers and thought it would be cheaper and easier to design the knob and print it than to keep ordering new ones.
This desiccant box is sized to fit inside a display cabinet so that it is not visible and hides inside in one of the corners. This is effectively a remake of my "Desiccant Container with Screw Cap" -…
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions. I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates. I also created some small spacers for the sides and the back.…
Angle Connector 35x35mm with 5mm holes for M4 Screws Winkel 35x35mm mit 5mm Löchern für M4 Schrauben
CLAMP HOLDER 50x300 https://www.printables.com/cs/model/752981-clamp-holder CLAMP HOLDER 120x400mm https://www.printables.com/cs/model/828691-clamp-holder-120x400mm
Base for the creation of a MTB mudguard fork Rockshox35 TK Silver
It´s a little box to make unused space accessible. espacially for Pinhole Patterns of Ikea-Method kitchen funiture. Note: I increased the Vertical shell Perimeters to 5, to avoid infill in the Walls. To make everything look smooth, I…
Dies ist eine Schublade mit Halter für 3 Schubladen für die Skadis Wand. Druck: 0,4mm mein Infill=30% Gedruckt mit PLA+ Viel Spaß
Holster für Swissphone sQuad X35 Dieses Holster ist zur Nutzung mit den Standart Gürtelclips, die es auf diversen Platformen gibt, gedacht. Einige Vorteile sind Vorbereitung für Gürtelclips vernünftiger halt am Gürtel stabile Ausführung,…
These printable snap-in 3x35 mm pins are intended as a replacement for the clevis pins in the Mosquito airsoft replica. Link to the Mosquito airsoft replica on Printables:…
The back cover may be needed if the hole in the drywall was poorly done and extends outside of the switch cover. The insert should fit right on and will be held in place by the switch cover screws, just don't over tighten those. Print…
NOTICE: This does not work with 3.5" props, only 3". The 3.5" props interfere with the canopy. I looked for quad frames that would fit, or be easily modified to fit the 03 Air Unit while achieving CRUX35 flight times, but those do not…
🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45 Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für…
Could not find a good parametric box that had all of the adjustments I wanted so I made one and wanted to share
Dies ist eine Schublade mit Halter für die Skadis Wand. Druck: 0,4mm mein Infill=30% Gedruckt mit PLA+ Viel Spaß
After the bottom plate of my Crux35 frame from my 3.5” FPV copter broke twice in a row and I no longer had a replacement, I designed a compatible frame for the 3D printer. The dimensions are designed so that the stiffness of the arms…
Best print in ABS or PETG with supports. Designed for Fat Daddy´s v4 low profile 510 and keystone battery connectors P/N: 228 and 209 Print Settings Printer: MakerFarm i3V Rafts: No Supports: Yes Resolution: 0.2 - 0.3 Infill: 30%…
Print-in-Place Bearing (15x35x11mm) Engineered with tight tolerances to minimize play, it serves as a robust alternative for non-critical mechanical assemblies. Technical Specifications Dimensions: 15mm x 35mm x 11mm (Width). Scalability:…
Bonsai display table (No. 05) rectangular 240x150x35 mm, best for bonsais with rectangular or oval pots. Feel free to scale up or downn until you like the result and it suits your tree.
A cap for the Hyundai ix35 headlights with the corresponding silicone gasket. Print the cap in ASA, ABS, or another material capable of withstanding higher temperatures. The "Gasket [Silicone]" files are not for printing, they are just a…
This is a 3D-printed adapter for the property VESA Mount for the HP OMEN x25f and x35c. The through holes are for M4x40mm bolts.
Mount for iFlight GP8 Category: 3D Printing
Remix of LordS's "Drill Holder" design, size is adjusted to fit the WORX hammer drill model WX354.9
Fixed 20 Deg version. I will publish more fixed angle versions later. Print 2off flat using TPU no supports required. With rocksteady off some intermittent very slight vibration is present in the camera recording and feed. With rocksteady…
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
Plate for a FC - fixed by zip ties
This design is a box with a lid that latches. The lid attaches with a filament hinge. The overall dimensions are driven by the number of rows and columns of compartments and their size. The Fusion 360 design is parametric. This model is…
If you break the shutter trunk lock now you can replace it. Print in PETG, ABS or ASA.
just thought it would be nice to print you own base in the color of your liking the hole is there just drill to the size you need for your light wire foe your LEDS
The small model is lighter but provides less protection, no TPU in view. The large model is heavier but provides more protection, slight TPU in view. Print laying flat on the side, infill density is up to you and your weight requirements.…
I designed this Turtle Basking Area piece that fits on an Ender 3 bed (235x235mm). You have to print two copies. After that it hold on to the glass very tight so you don't need to glue the parts. The upper part is cut for 3mm acrylic…
Comme tout possesseur d’escabeau, je me suis déjà retrouvé perché dans mon salon avec un patin abimé sur l'échelle, des rayures sur le parquet et une perte de stabilité. Plutôt que la réparation habituelle, j'ai pris quelques minutes pour…
This part is printed in tpu and replaces the standard aluminum mount that comes with the frame. It provides more protection for longer camera's such as WS moonlight by mounting the camera further back in the frame. Note: If you have a…
Wallmount: PRint like ever you want Sideplate: Use TPU or something else flexible
---> English Drainstand + Raiser for Flowers and Plants! Drainstand: If you want to messure your EC or pH-parameters befor and after watering it's usefull to use a Drainstand. The Drainstand ist also usefull if you just want to be sure…
Based on the STL files available from HappyModel https://www.happymodel.cn/index.php/2021/09/08/3d-printed-camera-holder-and-antenna-holder-for-crux35-crux35-hd/ Step files included for easy modification
A remix of my sundial model. Instead of a printed hinge (which caused problems with assembly), I used a hinge in the form of an M4x35mm Allen screw. Remiks mojego modelu zegara słonecznego. Zamiast drukowanego zawiasu (który sprawiał…
Need a 35x35mm tripod quick release? This should do the trick. It fits my Sunpak tripod, but should fit most that take a square model with two angled sides. My current configuration with this has a 5/8 inch ¼ 20 bolt through the bottom,…
Simple but sturdy bracket. Countersunk 4mm holes. Made to stiffen up an old table.
Simple functional L Bracket 40x40x35mm with countersunk screw holes.
Angle Connector 35x35mm with 5.2mm holes for M4 Screws Winkel 35x35mm mit 5.2mm Löchern für M4 Schrauben
Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Printed on: Creality 3D K2 Plus Combo Printed in: Creality Hyper PLA black - Prusament PLA Marble Grey…
ATTENTION: Printer with at least 350x350mm bed required. This print is placed in an IKEA Sannahed 35x35 frame between the passe-partout and the back wall, providing a holder for placing a Lego Botanicals set on top, for example. When…
Protector simple de suelo para estanteria modular de 35x35mm en L. Impreso en PLA y con poco filamento. Se puede escalar si tu estanteria es de 40x40 u otra dimensión.
I created this in Onshape to replace a missing tonearm clip for a Sony PS-LX350H. When I bought the record player this part was snapped off and only partly there. I used what was left, and a set of digital calipers to get some…
A fun maze! Size is 35 x 35. Use a 4mm steel ball. You can find the solution in the pictures. Fun toy or puzzle for everyone!
Simple Design, 1cm thick for hanging objects or for other porpouses Dimensiones in mm: 80x35x10
Downloadable parts for this YouTube video: This is a cleat designed to anchor a 1/4 Aluminum Sheet Pan to a milling machine table to protect the table, keep chips out of the slots, and provide a handy place to set tools while working.…
Here is a simple and strong mount for the BenQ Monitors where the adapter mount non longer works. Used was a plate converter Vesa Plate ( https://www.amazon.co.uk/Goobay-63267-VESA-Adapter-Mount/dp/B00GOI0WD2 ) and 6 x M4 45mm bolts.…
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server. You need two of them, just mirror it in the slicer. Go ahead and give it thick layers and many walls, I used 0.32mm layer height and 8 walls. It's surprisingly strong and the only…
This is a camera mount for the Runcam Thumb Pro Camera on a Happymodel Crux35. It protects the camera an provides a fixed camera angle of 25 degrees. Enjoy! Print Settings Printer: Self built Rafts: No Supports: Yes Resolution: 0,2mm…
oops i forgot to upload the .step, the length issue is still around tho its like .2mm to long or something. This needs to be cut out of carbon fiber, it serves no benefits if its just 3d printed.
This is a 6X35mm finder scope based on the following items from surplusshed.com: https://www.surplusshed.com/pages/item/L2075.html https://www.surplusshed.com/pages/item/L14523.html It consists of the following parts: Optical Tube (qty 1)…
It's a replace of the armrest for Hyundai IX35. I printed in horizontally using PETG filament and it works well.
A lifesaver for your kitchen! This practical bag clip is designed to securely seal your opened packages. Simply fold over your bags of chips, coffee, pasta, or frozen foods and slide this clip on. Its specialized inner geometry grips the…
This is a 15x35x8 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 15mm External diameter : 35mm Width : 8mm Balls : 8 POM ball…
https://www.ikea.com/gb/en/p/sannahed-frame-black-80459117/#content https://www.aliexpress.com/item/1005002048512739.html?spm=a2g0o.order_list.order_list_main.77.2a881802ZVR2Nl
This is a remix from link below. I liked the way the Sur-Ron front fender looked also didn't feel like spending $30 on the mx350 plastic, so I resized it to fit the mx350 and added a hole for the bolt. I made two my first attempt came out…
A compact container for storing vegetables in the fridge, helping you keep your food fresh and your fridge organized. Perfect for small vegetables like radishes, shallots, chili peppers, garlic, or cherry tomatoes. The size is designed to…
Its a baseplate for the ZK-FX35 load tester. I did not like the Micro-USB-port so I installed a USB-C-connector (for power supply). The USB-C-connector is from aliexpress and you have to solder plus and minus onto the board (near the…
FX35 Load Module Enclosure – Custom 3D Printed Case This is a custom-designed enclosure for the popular Chinese electronic load module FX35 . The case provides secure protection, reliable cooling, and a clean look for your bench setup.…
antenna holder for crux35 aio fc
Just a simple and easy mod. Category: Other
This is a remix of Matthew Neuforth's PCIe bracket for the Mellanox CX354A, adding an LED window. This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes…
Projekt obudowy do panelu LEB COB 48 chip 40x35 Konstrukcja obudowy pozwala na łączenie lamp pomiędzy sobą w ten sposób możemy budować większe moduły oświetlenia. W projekcie wykorzystano: M2x6 - 2 sztuki - do przykręcenia płytki…
Hehe should fit any random flag with a 5.3mm shaft
between v2 and v3, one is just shorter, and one prints at a offset angle. both seemed to work for me.