1576 modeli
Vertical Featherboard for the fence of the Bosch GTS10XC. You'll need per set 1x Featherboard 1x Top Bracket 2x Slot Nut 4x Knob (Update 19.12.2022: Knobs designed a bit smaller to ensure better handling) 4xM6 Hex bolts 2x M6x20 for the…
Wydruk około 6,92 €–8,46 € nettoWstępna wycena jednego wariantu
Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…
Wydruk około 11,84 €–14,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an exact scale replica I made in Fusion 360 of the "horizontal (red)" part of the “XCP-DS Fit® universal sensor holder system” found here:…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Remixed the excellent work of Rephlex00 to suit my need. I simply elongated the tabs that hold on to the collar so they'd hang on to it more. As originally designed my 55lb pitties shake the AirTag off when they shake their heads side to…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
SAND EXCAVATION ARM The Dig-arm is the perfect toy to turn digging in the sand into a simple and fun activity. Designed for children and “big kids,” this toy allows little ones to stick their arm in and dig like real builders at the beach…
Wydruk około 33,17 €–40,54 € nettoWstępna wycena jednego wariantu
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Harb is a small excursion steamer that fills both in the harbour and in the lakes of this world at home. What he doesn't like is the rough, open sea. High waves can make him capsize due to the high centre of gravity. Since you don't have…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
Einfacher Absaugadapter um die GTS an eine 50mm Absaugung anzuschliessen. Gedruckt in PETG.
Wydruk około 3,34 €–4,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A model of the hexcore anomaly seen in many different shapes and sizes throughout the second season. Print all the files once. Paint the inside surfaces and internal pieces. This is easier to do before assembling. Glue the internal pieces…
Wydruk około 11,74 €–14,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
bottom part REMIXed for Canyon Exceed CF6
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Men, provide the proof. 30 cm is 30 cm, 12" = 12" no doubt about it. Sometimes men are not believed, but I don't know why that is. With this ruler, which can only be used exclusively by men, the proof can be provided. Every man should own…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
OpenFaceMask is an 3D printable open-source protective mask, that only requires parts which are available in every common household. No gluing, no sewing required! The frame can be pressed together and minimizes print time when using SLS…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This little reprint lets you hand grip and ratchet Xcelite nut driver bits. Nice and firm grip on the tool shaft so it won't drop out, but still easily pressed in and out. To reverse the ratchet, turn the tool over.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This box is designed to fit the Arduino Compatible DC-DC Boost Module with Display - XC 4609 from Jaycar or eBay. Has hole for voltage adjust screw as well as button hole for display change. In and Out holes fit 8mm DC socket panel mount…
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
Improved eccentric blocking system for MFT type workbench with 20mm holes. Printed in PETG, not to be used for hard work ! Details in 3mf file. Système de blocage excentrique amélioré pour établis type MFT 20mm. Imprimé en PETG, non…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: The stamp is designed so that the stamp plate on the stamp foot can be exchanged. This means that different motifs can be stamped with the same stamp handle. (PLA, Prusament mystic brown). The recesses visible from the front and side…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. The Bitexco building is 65.5mm tall, equivalent to a scale of 1/4000 in real life, and can be used for architectural projects or dioramas.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My teacher wife wanted to have a memory game for the kids which she can reuse with customizable paper prints. Thats what came out. The paper square must be a maximum of 4.8 x 4.8 cm. Maybe a bit smaller due to tolerances. On my MK4 it…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
VONT Flash Light Holder 2Video link https://youtu.be/Idu4CmVmfxc 7.50 mm X 50mm Wrist Mount.
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
I have printed two of them, one that fits in my mobile toolbox, the other in the drawer of my workbench. That way, those guides are always where I expect them to be, I know exactly how to position them on my work piece even without…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting plate for cheap USB-microscope to ML3DPrintings Anicubic i3Mega XCarriage MK4. Great for precisely taking a few pictures of delicate pcbs for example. You'll need a M3 heatset insert and a M3x10 screw to mount the microscope clip…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
I also needed to somehow solve the holder for the grinder. So, with permission, I adapted the original author's design @kerngebiet. I'm not very good at modeling and I had a hard time modifying the model in Tinkercard. But for my purpose…
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Haken für die kurze Mittelsäule 055xccsb für das Manfrotto 055XPROB Stativ. Getestet mit 21 Kg Belastung wobei sich der Haken nur leicht verformt. Die Bruchlast habe ich nicht ausprobiert. Für die Befestigung benötigt man eine…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
BoatSilhouette
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Jedná se o náhradní šroubek ke stavebnici bagru Bavytoy. Je to kratší šroubek, který se umisťuje na radlici. / This is a spare screw for the Bavytoy excavator kit. It is a shorter screw that is placed on the blade.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
DE: Dankeschön an Luca, diese Idee macht mir meinen Batterieorganizer noch wertvoller! AA und AAA Batterien haben oft im Bereiche des Plus-Poles eine ringförmige Kerbe. Damit der Hebel bei Vorhandensein besser daran angreifen kann habe…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
EN: Box for 10 different stamp motifs. Material : Stamp handle: PLA, PETG Layers : Stamp handle: 0.3mm, 0.2mm as desired Supports : no Motifs : smiley-2c smiley-2b smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
Protect your table in style! Our 3D-printed coffee coasters combine smart design with humorous texts that will make you smile. Perfect for coffee lovers with a sense of humor – a fun addition to your coffee break or a unique gift for any…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
I wasn't quite sure about the naming (feedback welcome) but this is the current naming scheme: Nozzle Sizes: 0.25, 0.4, 0.5, 0.6, 0.8, 1.0 Types: B -Brass HB - High Flow Brass S - Steel X - Nozzle X R - Ruby O - ObXidian HO - High Flow…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here's a really cool model using support beams as part of the structure. Exclusive for the Prusa Mini, it uses spheres that were originally meant to be planets of the Solar System that accidentally came out looking like this. Really…
Wydruk około 4,31 €–5,27 € nettoWstępna wycena jednego wariantu
🚀 A story you can print! 🌌 After surviving a wild meteor shower and repairing their ship in orbit, Star & Light land on a lonely asteroid for a well-deserved rest. Side by side, they sit gazing at the galaxy, while Gearon , their loyal…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena jednego wariantu
This is a fully functional RC excavator that takes advantage of the wonderous capabilties of 3D printers. It uses micro robotic development parts such as an ESP32 development board that can be programmed via the Arduino IDE, this model…
NEW print-in-place tracked excavator available here ! OR join my Printables club and get it FREE ! Introducing the print-in-place excavator! This is a challenging print if your settings are not refined. Test your overhangs, clearances,…
Print-in-place and Articulated Surprise Egg #4 - Tiny Excavator 'Making of' video: Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock…
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
Brand new cat. Stronger connections and more flex. Úplně nová kočka ;). Pevnější spojení a větší flexibilita.
My take on a Honeycomb cutout style wallet card for Apple Airtags. Once or twice a year I tend to misplace my wallet somewhere. It usually winds up turning up somewhere in the garage or in the car, under the seat! An Apple Air Tag would…
Toy excavator with moving parts. I used 2mm aluminum tig rod as the pivots. Tooth picks or filament may also work depending on the scale. It will need supports on parts of the track base and at the end of the main arm, all included in the…
Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…
Small excavator key chain made for the operators at work. After printing, the two parts will connect together with some even pressure and some rotating, try keep everything as straight as possible. looks good printed with the tracks black…
This is 3D printable model of the Excelsior Class NCC-1701-B Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of the necelles need to be separated into separate model in the…
Excalibur is a pump-action blaster with plenty of power, quick spring swapping, and the ability to swap between full length darts or half length darts on the go!…
Covered freight car, model 11-270. USSR, 1986. Widely used in Russia. Print instructions Two variants of main body: details marked "V" for "vertical" mode, "H" - horizontal (see the picture). Two variants of underbody: one with fixed…
Hello, this is an RC Excavator. Its intended to provide a fun entry level way to get hands on experience with some simple electronic components commonly found in robotics but if that's not your style you can also control it with standard…
Designed with a flange on the right hand edge to rest on the door jamb, and a large flange for the door sit against along the top and the left hand side. Print it flat with the door flange side on the bed - support is needed for the door…
Edit: I have now added a version of the baseboard that can also be printed on a 180mm x 180mm print bed. (untested)The disadvantage of this variant is that you cannot get quite as close to the saw blade with the featherboard. There is a…
This is for the NON NIVOMAT suspension! For further details, please refer to my work in progress, collaborative, P2 XC70 Lift Guide Here! (A PDF Version is also available under the files tab in case the link is broken) This should lift…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
Required for the DXC2 Extruder
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
I love what ProfessorBoots ( https://www.printables.com/@ProfJohnny_823077 ) has done for the 3D printing community. Please support ProfessorBoots for all of his work to make these models come to life. It does take hundreds of hours to…
Approximately 600mm long model of the CAT 395 excavator. The model has working tracks, a rotating floor, and a fully movable arm and bucket. The model is printed entirely in PLA with a resolution of 0.20 for the larger parts and 0.10 for…
Only the one true king may draw the sword from the [book], go on, pull it with all your might, you cannot free it from its--- w-what do you mean it “broke off”?!? Cursed Gauls and their magic potion! A pair of bookmarks based loosely on…
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
And again a simple, customizable OpenSCAD design. This time it's a two component stamp, a generic handle part and an interchangeable rubber part; no gluing necessary, simply print one or more texts and switch them around as you like.…
To view updated version of this model please click here. There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST…
Regal's Prop Shop team worked from WETA's 3D scans of Alexander Skarsgård costume to provide fans the ability to print their own WICKER collectible popcorn container in celebration this unique film opening at Regal theatres 10/23! FREE…
Loved the original design. I have a very small workspace and I cannot reach around or behind the printer so I made the bucket thinner and added a cutaway at the front so I can remove poops.
A featherboard, suitable for the T-slot of the Bosch 10 XC table saw. Heavily inspired by the design of Zeropage, I modified some dimensions by 0,1mm - 0,3mm since the fit was too lose in the original models
Ozito PXC Battery Mount \ Breakout If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…
This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)
For use with the DXC2 Extruder Upgrade Requires installation of original magnets
A 40 scale-foot box car, including coupler boxes and covers. Same as my 50/53 boxcars these are set up to receive bogies/wheelsets from commercial sources, and holes for both are sized to receive a 2mm bolt/screw. The coupler covers are…
Lego Duplo excavator digger bucket and arm piece with joints on each side. Not 100% accurate but fits. You can easily modify my models on onshape.com (they offer free tier with only public models), it's not that different software from…
Release Client! This is the final update unless users come across any issues. If you have one working, you do not need to upgrade. I have run approximately 100 hrs of filament through it at this point in this configuration. Feed tube…
Happy printing!
Machine-battery adapter for a machine that originally uses a Parkside PAB-18 1.5 A1 battery. This adapter enables to mount Einhell Power X-Change batteries to the Parkside machines. Extra stuff you need: some wiring and a soldering…
Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.
Ozito PXC Tool Mount **Edit - added extended version to accommodate belt clips If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee…
This is a kit card of the YF-19 Excalibur from the anime Macross Plus. It was suggested by Koobs7 over on Thingiverse, had a look at it and decided to make it because reverse wing aircraft are pretty cool looking. Normally I would give…
Can be swapped directly out with the original claw attachment pieces. Created to scoop more beans!
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
This design was inspired by Holraven's design. This dock sits in that weird little ashtray cubby between the wireless charger and the shifter. The goal of the redesign: No need to drill/alter/remove anything in the car. Allow the phone to…
about 5.5 ft. reinforced with a combination of .5 and .25 in dowels. have fun. Category: Props
A spinning top that creates an illusion of a floating exclamation mark when spun. Dimensions: Width: 85mm Height: 50mm
This is a fully assembled RC excavator in Fusion 360 using the original STEP files from Professor Boots. All components are constrained with functional joints (revolute and slider), allowing motion studies and kinematic analysis. The rear…
Made it larger, added a cutout for the air vent holes on the X1E, added an embossed logo. Bambu Lab X1E 0.4 Nozzle Textured PEI Plate Bambu PETG Basic 0.20mm Strength @BBL X1C No Supports No Brim
This is a great puzzle to give as a gift because you can hide gifts like money inside the blade, There are two versions of the blade which is detachable from the handle and tip. All the pieces are separate so you can print in different…
Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.
🇩🇰 Velkommen til Danmark Welcome to Denmark! ---------------- Update, April 16, 2024 - We are devastated from the news that a most unfortunate fire destroyed this building of such historical importance. We hope our model brings comfort…
American Car Foundry 50' 6" Boxcar in HO scale. For this model you will need to print the following amounts from the list. 1x Boxcar end 1 1x Boxcar end 2 2x Coupler cover A 2x Coupler cover B 2x Boxcar Side 1x Floor 1x Roof 1x Brake Part…
This is a set of pieces that can be used to recreate the Boba Fett - White figure at 500% scale. This minifigure was included in two promotional sets given away at the New York Toy Fair in 2010. A Presentation Box with Exclusive Book and…
The base piece slots in over the 12v charger, and the magsafe holder snaps into the large piece. The two pieces have been separated to make it easy to print. Only print in PETG or another temperature-resistent filament.
60 Foot Gunderson Double Door Boxcar. Designed to be built after the pieces have been printed. Follow the parts list for all the parts in the boxcar and the detail parts for the boxcar. All parts can be printed with FDM. Most of the…
Summary Speed cube stand that works great with any size: 2x2, 3x3, 4x4, 5x5, etc. Also, created a "double stack" version of the design for a little more artistic look. Double stack does not need raft or support. Check out my other puzzle…
This is a cap that covers the female end of an xconnect cable used for Halloween/Christmas LED lighting. Useful for sealing up unused outputs or power injection runs. I really liked the original design, but was not completely happy with…
Quick and easy print - use any layer height and infill. I printed in PETG, the replacement blades are still consumable so don't expect them to last long. Maybe a nylon or PC filament would be more durable, but PLA and PETG are pretty…
A stable and easy to print adapter to use your Makita batteries with Einhell PowerXChange tools. Fit is pretty thight but not sticking. Included the supports for the Makita locking in the drawing to save supportmaterial. Simply remove it…
Similar shovel for the big Bruder Caterpillar shovel excavator / ähnliche Schaufel für den großen Bruder CAT Schaufelbagger Baggerschaufel If you like it --> press like it :-) Print in use since 7 month / Druck seit 7 Monaten in Gebrauch.…
My kids wanted a extra-wide sieve bucket for their CAT excavator (Bruder no. 02483), so I remixed the existing one as indicated. Print either oriented as-is, or with the opening facing upwards, in both cases with organic supports. In the…
I couldn't find any printable cases for the Samsung Galaxy XCover Pro, so I went through a few iterations to make this one. I kept it simple so that you can add your own embellishments. I had some issues with older versions of Cura not…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Print at the quality you desire, I use 0.2mm layer heights…
I like all models regarding helloween time. Thx a lot to creator SERGIOJRF. I printed all pars in 0.2 layer and 15% infill. Fence and Zero (dog) with supports, dog eyes with rafts.
