Wyniki wyszukiwania: yeti

Sortowanie

587 modeli

P
PrintablesPeter C

Golf - clicgear - big bottle holder - (25 x 9 cm) YETI Rambler & Thermoflask

Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…

Pobrania
119
Polubienia
10
Ocena
0
P
PrintablesMad Dawg

Yeti VB Stubby

adjusted to fit VB Stubby

Pobrania
10
Polubienia
1
Ocena
0
P
Printablesroblpetty

Car Cup Holder Bottle Adapter (Nalgene, Yeti Rambler)

Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…

Pobrania
5239
Polubienia
771
Ocena
4,75
P
Printableskatech35

Cupholder Adaptor (Yeti Rambler & Nalgene)

I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…

Pobrania
1823
Polubienia
304
Ocena
4,91
P
PrintablesShaneTalksTech

Clamp on desk cup holder for Stanley/Yeti tumblers

I made a cup holder for the larger style tumblers that clamps on the edge of a desk. I have seen other cup holders for these larger mugs but, they are permanently attached to the desk via screws. That is not an option for when I am at…

Pobrania
1297
Polubienia
178
Ocena
4,67

Yeti

Any tips or donations are greatly appreciated ❤️ Or support on Patreon: https://www.patreon.com/printedencounter

Pobrania
891
Polubienia
128
Ocena
4,57
P
Printablesncsandor

Simple Cute Yeti

The warm weather is slowly arriving, Mini Yetis have started retreating to the depths of the freezers and refrigerators, but even so, if we are lucky, we can meet free-roaming specimens. Material: Prusament - Vanilla White Layerheight :…

Pobrania
858
Polubienia
127
Ocena
5
P
PrintablesJim Tinsman

Yeti Lid Holder

My wife wanted a way to store the Yeti lids but didn't want any shelf space used by the holder. I designed a U-shaped holder that attaches to the inside of the cabinet door. I attached them using some double-sided tape. Gorilla tape…

Pobrania
840
Polubienia
166
Ocena
5
P
PrintablesSegan Designs

Yeti Gen2 Tall Can Adapter

This is a screw on adapter for the Yeti Colster 2.0. It adapts to fit a 16oz can. This ONLY fits the new 1/4 turn thread-on cap design. Edit 2023-02-12: Added an extended version to fit 19oz cans based off of another users suggested…

Pobrania
798
Polubienia
90
Ocena
5
P
PrintablesDROO

YETI Tundra™ Cooler Drain Plug

I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…

Pobrania
774
Polubienia
73
Ocena
5
P
PrintablesOstella3D

Yeti 14 oz Rambler Adapter for 2017 Toyota Tacoma Center Console Middle Cup Holder

A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…

Pobrania
771
Polubienia
120
Ocena
5
P
Printablesgbombadon

Yeti fruit - Blox fruits

Roblox Blox Fruit - Yeti Fruit 3 models: 1 all in one with chain which I found tricky to print with supports everywhere and difficult to remove, so I added separate models for the chain and fruit with no chain. Supports - yes.

Pobrania
748
Polubienia
30
Ocena
5
P
Printableskenny.peterson

Yeti Mug Adapter for Car Cup Holders (v3)

> be me >typical monday morning >makes coffee and pours in new yeti mug >was a gift, makes me happy >get in car to go to work >new mug kinda fits in the top lip of the cupholder >eh, I'll just hold it >15 minutes later when a jerk cuts me…

Pobrania
702
Polubienia
80
Ocena
5
P
PrintablesKyle88

SUP (Stand up Paddle Board) Cup Holder - Yeti

Cup holder that holds Yeti 30oz Tumbler to your SUP (Stand up Paddle Board) using the Bunge straps.

Pobrania
692
Polubienia
74
Ocena
5
P
PrintablesKevin Seitz

Cupholder Extender for 2021 Tesla Model Y - fits 36oz yeti water bottles.

This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…

Pobrania
683
Polubienia
79
Ocena
5
P
PrintablesPhill Bond

Yeti 330ml Can Spacer

If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…

Pobrania
628
Polubienia
21
Ocena
5
P
PrintablesShmderden

Yeti Mug Cup Holder

Probably best to print with PETG rather than PLA due to how hot it gets in vehicles.

Pobrania
594
Polubienia
91
Ocena
3
P
PrintablesMZ4250

Yeti Collection

An updated Yeti collection perfect for your tabletop game! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…

Pobrania
554
Polubienia
34
Ocena
0
P
PrintablesNinomalbinho

Yeti-Bigfoot Wall Art #1

A great wall art of a Yeti, Bigfoot or Sasquatch, it has many names. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker

Pobrania
547
Polubienia
102
Ocena
5
P
PrintablesJuliusCaesar

20oz Yeti Rambler Handle

This handle was modelled after the official Yeti Rambler 20 oz Tumbler Handle from this link, YETI Rambler 20 oz Tumbler Handle | Sport Chek . It has a slightly loose fit so that users can add electrical tape to the inside of the rambler…

Pobrania
546
Polubienia
87
Ocena
4,56
P
PrintablesTackleberry

YETI 20oz Tumbler Reinforced Handle

The model is straightforward; print the handle upside-down, and the insert on its side. Use cyanoacrylate glue for the insert. This was originally designed by jasonalday on Thingi, and the insert design remixed by DanBuro on the same…

Pobrania
527
Polubienia
84
Ocena
4,8
P
Printablesloidolt

Yeti MagSlider Replacement

**UPDATED TO INCLUDE VENTILATION SLOTS Since Yeti keeps running out of stock for their MagSlider replacements, I decided to model up my own. This part is a direct replacement for the slider on your Yeti cups that keeps flying off and…

Pobrania
490
Polubienia
77
Ocena
5
P
Printablesnotcolin

14oz Yeti Rambler - Car Cup Holder Adapter

Here’s a quick model for a 14oz Yeti Rambler mug (approximately 100mm diameter at the base). I couldn’t find one that worked for my needs, so I designed this to fit nicely in the 2024 Ford Escape cupholders. The model is based on the…

Pobrania
489
Polubienia
37
Ocena
5
P
PrintablesZacDoesProjects

Yeti Tumbler Lid Holder

5% infill Lids are loose fitting to make it easier to use. March 12 2025: Added holder that had both size lids

Pobrania
489
Polubienia
89
Ocena
5
P
PrintablesDannyji00

Yeti Lid Organizer/Holder

I designed this to hold 4-5 Yeti Lids as they were cluttering up my cabinet. The cutout in the front aligns with the lip of the yeti lid. This is for medium lids — check out the new versions with different sizes here:…

Pobrania
481
Polubienia
49
Ocena
4,78
P
PrintablesBlackLion

YETI cooler

Led not attached to the cooler. It only rest on it or you can glue it.

Pobrania
430
Polubienia
24
Ocena
5
P
PrintablesDannyji00

Yeti Lid Organizer V2 | Holds 5 Yeti Lids and Magslider Magnets | Available for small, medium, or large lids

This 3D printed Yeti Lid organizer is perfect for organizing 5 small, medium, or large yeti lids. There are versions for including either straws or magnets. 2.8" Lids are used on "small" drinkware, including 10oz Tumblers. For more…

Pobrania
419
Polubienia
70
Ocena
4,5
P
Printablesiamstevedavis

Yeti Lid Holder - 3 Sizes w/ Optional Magnet for Satisfying *Thunk*

Yeti Lid Holder https://i.giphy.com/media/zvpds7EGBb5rDojsNq/giphy.mp4 I created this model to hold Yeti lids. It has a 10mm square hole in the base that can hold a 10mm square magnet, if desired. For the yet lids that have the magnetic…

Pobrania
380
Polubienia
39
Ocena
5
P
PrintablesMartin_au

Skoda yeti cupholder

Makes the normal mini-cupholder in a Skoda Yeti a more useful size. Was designed for a 2011 Yeti. Also includes a version for holding 600ml milk cartons. :D

Pobrania
376
Polubienia
62
Ocena
4,75
P
PrintablesCary Ortiz

Bigfoot / Sasquatch / Yeti Lightswitch cover

Have a little fun with this Sasquatch / Bigfoot / Yeti Light switch cover. Should fit most standard size toggle switches. It could be modified for modern wall switches but it would lose the affect. I printed this faceup so the ugly would…

Pobrania
355
Polubienia
50
Ocena
5

Yeti 16oz Colster Can Adapter

Get the best of both worlds with the Yeti 16oz can adapter! This adapter fits perfectly into your 16oz Yeti cup, allowing you to enjoy a 12oz can of your favorite beverage. Enjoy cold drinks for longer with the superior insulation of Yeti…

Pobrania
354
Polubienia
52
Ocena
5
P
PrintablesVidstig

Blue Yeti Desk Stand

The stand in the photo is the 100mm version, but I also include a 75mm version that is a bit smaller. That should fit with the cord. The knob use a normal M6 Hex screw bolt 20mm. Normal 6 sided head (bolt head).

Pobrania
341
Polubienia
30
Ocena
5
P
PrintablesPotatoFi

Blue Yeti Nano Boom Mount MK1

I didn't like how my Blue Yeti Nano mic attached to my microphone boom. It made the Yeti Nano very tall, which made it difficult to use my mouse and keyboard underneath the boom and mic, while keeping the microphone off-camera. I also…

Pobrania
335
Polubienia
25
Ocena
4,67
P
Printablescwcb08

yeti roadie 24 tray

requires support for v1 or flip and print if your bridging is good for v2, two will fit in a cooler. I printed v1 without support and just trimmed and filed the bad overhangs flat to save 50m of filament, thats why I moved the logo and…

Pobrania
331
Polubienia
45
Ocena
4
P
PrintablesBBTheStig

Gridfinity Yeti (30 oz.) Tervis (24 oz.) Lid Storage Bin

3x3 Gridfinity bin to stack 30 oz. Yeti Rambler Lids or 24 oz. Tervis Travel Lids.

Pobrania
331
Polubienia
80
Ocena
5
P
Printablescoffeeandubuntu

Yeti 46 oz Rambler Cup Holder

I couldn't find a cup holder for my Highlander that also fit my new Yeti Rambler 64oz water bottle. Designed one in Tinkercad and it works great! Printed in ASA for UV and heat resistance (don't try using PLA for inside a car). PETG would…

Pobrania
328
Polubienia
29
Ocena
5
P
PrintablesEDnation

YETI cooler divider

Notes Divider similar to the one sold by Yeti Fit the Tundra 45 and 35 model. The divider is exactly the same in both models Print notes STL oriented correctly Size of part on Bed: 275mm x 255mm Very prone to warping due to it's shape.…

Pobrania
319
Polubienia
61
Ocena
5
P
PrintablesKappa090

Yeti Rambler (26oz) Adapter Ford Kuga/Escape

A simple model that adapts the 26oz Yeti Rambler to the TF MkII Ford Kuga/Escape centre cup holders. I haven't test fitted in any other series of the Ford Kuga/Esacpe but it's possible the centre cup holders are the same size, if you…

Pobrania
307
Polubienia
30
Ocena
0
P
PrintablesQuickset45

Not Yeti travel mug handle

Coffee Mug Handle Compatible with yeti rambler coffee mugs.

Pobrania
292
Polubienia
52
Ocena
5
P
PrintablesBuffalo Forge

Very satisfying Yeti Rambler 30 ounce handle

There are a lot of Yeti handle models out there. I like the two-ring ones that support the tumbler at the top and below the beltline. This one prints easily with minimal supports. It screws together with a printed-in-place screw and it…

Pobrania
291
Polubienia
94
Ocena
4
P
PrintablesRem

Yeti Rambler Cup holder Adapter

No supports needed. Recommended to be printed in PETG or ABS for thermals. It fits very snug in the cup holder of my grandpa's 2020 Dodge Ram Requires 4 m3 bolts to attach. Maybe some super glue between the parts if you want the extra hold.

Pobrania
272
Polubienia
30
Ocena
5
P
PrintablesBBTheStig

Gridfinity Yeti (20 oz.) Tervis (16 oz.) Lid Storage Bin

3x3 Gridfinity bin to stack 20 oz. Yeti Rambler Lids or 16 oz. Tervis Travel Lids.

Pobrania
270
Polubienia
56
Ocena
5
P
PrintablesJackspicer

Blue Yeti mic boom arm adapter

Printed settings 0.2mm layer height 10% infill printed in tricolour PLA Knurled for your pleasure to screw it in. Hope it works for you. :)

Pobrania
257
Polubienia
12
Ocena
5
P
Printablesisyork

YETI Can holder

Holds a standard 12oz can.

Pobrania
254
Polubienia
43
Ocena
0
P
PrintablesWatchMonster

YetiCaster Microphone Boom Arm Desk Clamp Replacement

I misplaced my original desk clamp that came with my YetiCaster boom arm. It's easy to find other C-clamps, but it's NOT easy to find a clamp that fits the silhouette of the base of the arm. Attach some self-adhesive padding to the end of…

Pobrania
249
Polubienia
17
Ocena
5
P
PrintablesMupshot

Yeti Koozie top

latest revision of my Yeti / Ozark Trail compatible koozie lid. Cone head lid Version 2 was made by chopping off the top 8mm of revision 3 and replacing with a beveled 45 degree taper. Threads are still standard ISO but they work well…

Pobrania
247
Polubienia
26
Ocena
5
P
Printablesgalagor

clip hood (clip bajo capó) Skoda Yeti VW Tiguan and others

This works on a Skoda Yeti/Octavia/Rapid/Superb or VW Tiguan. Instalado sin problema para sujetar el guarnecido bajo el capó de un Skoda Yeti, es común a otros modelos del grupo VW. Tried and tested on Yeti. the original part OE…

Pobrania
242
Polubienia
46
Ocena
4,75
P

Magnetic Cup Holder - Contigo and Yeti

Basic magnetic cupholder I used when I drove haul truck. Stayed on the doors and cab through large bumps without issue. I recommend ABS if you want a tough one but PLA works just fine. I found PETG to be too brittle in cold weather.…

Pobrania
241
Polubienia
18
Ocena
5
P
PrintablesTim Bradley

Tacoma (3rd Gen) Cup Holder Adapter for Yeti

Tacoma (3rd Gen) Cup Holder Adapter for Yeti

Pobrania
240
Polubienia
21
Ocena
5
P
PrintablesPotatoFi

Blue Yeti Nano Boom Mount MK2

I didn't like how my Blue Yeti Nano mic attached to my microphone boom. It made the Yeti Nano very tall, which made it difficult to use my mouse and keyboard underneath the boom and mic, while keeping the microphone off-camera. I also…

Pobrania
236
Polubienia
15
Ocena
5
P
PrintablesDrew Commins

YETI Rambler Straw Cap

This cap can be used to cover your YETI Rambler ® straw. It has a hole to let you attach it to the straw with a rubber band so the cap is always within reach. If you have problems with flying insects always wanting to share whatever…

Pobrania
234
Polubienia
24
Ocena
5
P
PrintablesEvan

Yeti Rambler Adapter

Built to adapt my standard cup holder on my love seat to hold my 36 oz Yeti Rambler. Category: Replacement Parts

Pobrania
232
Polubienia
29
Ocena
0
P
PrintablesJDM Designs

Yeti Coffee Cup Car Adapter

Lets you use a Yeti Coffee Cup in a standard cup holder No supports needed.

Pobrania
231
Polubienia
27
Ocena
5
P
PrintablesVaporizedKerbal

Yeti Mug Holder for Car Cup Holder

My mom loves her yeti mug, but it didn't fit in her car's cupholders, so I designed this. It works as intended, and she loves it. It should also work with any other mug that is about 100mm in diameter and short enough to not tip over in…

Pobrania
225
Polubienia
40
Ocena
5
P
PrintablesTrevor Mayowski

Tallster for Yeti Colster

Adapter the Colster for tall cans

Pobrania
218
Polubienia
25
Ocena
5
P
PrintablesJavi

Blue Yeti Thread Adapter

Some older Blue Yeti microphones have a larger, non-standard threaded mounting hole, which doesn't fit the standard 5/8" mount on most mic boom arms and mounts. One side of the adapter threads into the non-standard mounting hole of the…

Pobrania
216
Polubienia
10
Ocena
5
P
PrintablesTheChongus

Universal Yeti 14oz Cupholder Adapter

Designed this adapter for my Yeti Rambler mug because I was tired of not having anywhere to put it in my car. Should fit most cupholders, and the hole in the middle allows for some cans to still use the cupholder. Print in ABS or PETG so…

Pobrania
215
Polubienia
49
Ocena
5
P
PrintablesButtercup

Yeti Chug Cap Ice Filter V2 - Revolver Style

I print this in ABS. Use a thicker top, bottom and walls so water can't get into the infill. Mine has been mostly fine in the dishwasher. ABS can shrink a little now and then, so use the top rack or hand wash it if you're worried. Not…

Pobrania
211
Polubienia
47
Ocena
5
P
Printablesairman123456

Yeti Rambler 16 OZ Colster Spacer

A spacer you can 3D print that lets you use the 16 OZ Colster with smaller sized 12 OZ cans. I added a string to it so it is easier to reach in and grab. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…

Pobrania
206
Polubienia
5
Ocena
0
P
PrintablesRobomatic

Yeti mug cupholder

Yeti mug adapter to car cupholder

Pobrania
205
Polubienia
26
Ocena
5
P
PrintablesForeverwinter

YETI 473ml Spacer

Have a YETI 473ml (16oz.) Colster and want to use it with a 355ml (12oz.) can? Print this spacer and throw it in the bottom. NEW: Version 2.0 can accommodate either a 355ml OR a 330ml can depending on which side is up! Great if you have…

Pobrania
205
Polubienia
26
Ocena
5
P
PrintablesIan Black

YETI COOLER SLIDER FOOT

Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…

Pobrania
205
Polubienia
24
Ocena
5
P
Printablesdsimp387

Yeti Lowball Cupholder Adapter

My Yeti Rambler 10oz Lowball was just slightly too big to fit my cupholder, forcing me to have to hold my drink the whole time I'm driving. I made this simple, easy-to-print adapter that now allows me to put my Lowball in my cupholder…

Pobrania
203
Polubienia
31
Ocena
5
P
PrintablesKenkay

30 oz yeti lid and gasket

Here's is a yeti 30 oz lid and gasket i designed Print instructions For best results print standing up with supports

Pobrania
202
Polubienia
20
Ocena
0
P
PrintablesShorco

Yeti Boomer 4 Dog Bowl float splash guard

Made this for a friend who sent me a picture of a similar design. Prevents the dog splashing water while drinking. Sized for a Yeti boomer 4 bowl 150mm diameter Printed in PLA

Pobrania
201
Polubienia
21
Ocena
5
P
Printablestuturuu

Tesla cup holder for 36oz yeti rambler/redbull sized can

Do you keep your rambler on the passenger seat only for it to roll away when you hit the brakes? Look no further for a bottle holder so you can drift through those corners. The hole in the middle is also tapered for easy drop-in of a…

Pobrania
200
Polubienia
7
Ocena
0
P
PrintablesNinomalbinho

Yeti-Bigfoot

A new 3D figurine generated by AI, a Yeti-Bigfoot. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Pobrania
197
Polubienia
34
Ocena
0
P
Printablesmach3d

Yeti 30 oz tumbler handle

I created this to carry my 30 oz Yeti tumbler mug. It's a generic handle that will fit a medium or large hand. Recommend printing upside down (native orientation in the file). Recommend PLA and 20% infill. Use a small amount of supports…

Pobrania
197
Polubienia
21
Ocena
5
P
PrintablesSheepo

Low Profile Blue Yeti stand

I modeled this stand to get the blue yeti microphone out of the way of my monitors. The stand uses the screws/ washers that are included with the yeti. The microphone can swivel up and down a little so you can access mute and volume…

Pobrania
196
Polubienia
13
Ocena
5
P
Printablesmbiersack

Yeti/Ozart Trail / Insulated Mug Handle v2

I needed a simple handle for a friends generic yeti style mug but I didn't like how ( https://www.thingiverse.com/thing:918308 ) needed supports and it ruined the finish on the handle. So I whipped this up in Fusion360 in 15 minutes and…

Pobrania
189
Polubienia
35
Ocena
5
P
PrintablesKenkay

20 oz Yeti Lid and gasket

Here's a lid and gasket for 20 oz yeti I designed Print instructions For best results print standing up and up some supports

Pobrania
187
Polubienia
17
Ocena
2
P
PrintablesJordan

Yeti Cup / Tumbler handle

Original design. I've seen other similar models but I either don't like the handle or the random design on it.

Pobrania
186
Polubienia
35
Ocena
3
P
PrintablesCAR KEYCHAIN

SKODA YETI KEYCHAIN

This unique keychain is a miniature replica of the SKODA YETI, designed with a sleek, compact look at 7 cm by 5 cm . Printed in 3D with a two-color layer change for added depth and visual appeal, it captures the distinctive silhouette of…

Pobrania
182
Polubienia
20
Ocena
5

Yeti Colster Can Cooler - Size Adapters

Enhance your Yeti Colster experience with these can adapters. Crafted with precision and attention to detail, these adapters are durable and perfectly compatible with the Yeti Rambler 12oz and 16oz Tall Can Colster Can Cooler. Upgrade…

Pobrania
182
Polubienia
22
Ocena
0
P

Yeti Blue Mount for Arm System

This is a mount for the Yeti Blue microphone with RostaP's small arm system. Use the original mounting screws for the microphone to mount it to this mount.

Pobrania
178
Polubienia
53
Ocena
5
P
PrintablesTinyRoy

Yeti 16oz Can Cooler Extender for 500ml

Convert your 16oz Yeti can cooler to fit 500ml cans.

Pobrania
178
Polubienia
15
Ocena
0
P
PrintablesEdward Y

Compact Blue Yeti Microphone Stand

A microphone stand for the Blue Yeti USB microphone that will reduce the overall height and footprint compared to the included stand. Does not require any additional hardware. Can be printed in upright orientatation with no supports.

Pobrania
175
Polubienia
18
Ocena
5
P
PrintablesQuietMike

YETI Dog Bowl Riser Stand 64oz 66oz

YETI Dog Bowl Riser Stand for 64oz or 66oz bowls Raises bowl about 230mm at bottom, model itself is 250mm tall print upside down, only needs supports for the indented part where the bowl will go Included is a piece that allows 2 stands to…

Pobrania
174
Polubienia
14
Ocena
0
P
PrintablesSponge

Blue Yeti low Profile Stand

The Original Stand was too high and Heavy. I modify the Mini USB connector slightly to fit at an angle. :-P I have printed the Stand in two pieces and glued them together.…

Pobrania
171
Polubienia
29
Ocena
5
P
PrintablesTarz

Replacement Top Ring for Yeti Colster 16oz Tall Can Insulator

8/6/2023 STL added lid with textured, ribbed side. Textured ring pictured is TPU with 0.20 layer height. This is just a plain vanilla replacement top for the Yeti Colster 16oz tall can insulator. The top fit is quite snug having made the…

Pobrania
170
Polubienia
33
Ocena
5
P
PrintablesChriL

Blue Yeti VIVO Mount

A quick mount for the Blue Yeti microphone so it can attach to a VIVO monitor stand. Designed for a ~35mm diameter monitor stand. .step and .f3d files included. Print instructions Category: Office Summary A quick mount for the Blue Yeti…

Pobrania
167
Polubienia
22
Ocena
0
P
PrintablesNathan Quick

BMW Z4 (E89) double bottle holder for Yeti 12 / 18oz bottles

I recently purchased an E89 Z4 and noticed quickly that there isn't an obvious place to store a drinks bottle when out and about. I knocked up this quick model which can be velcro'd into place on the bottom. October 2024 updates. Now up…

Pobrania
166
Polubienia
25
Ocena
0
P
PrintablesChewey

Yeti 26oz tumbler handle

Just a simple ergonomic handle for the Yeti 26 ounce tumbler with straw. Print upside down with a brim.

Pobrania
164
Polubienia
28
Ocena
0
P
PrintablesTommyC

Large Car Cup Holder Extension ( Frank Green, Yeti suitable)

The Cupholder model was created for the storage of Large drink bottles in the car. It allows the ability to still place your drink bottle in your cup holder. Additional felt has been placed on the outside and inside of the cupholder to…

Pobrania
159
Polubienia
14
Ocena
4
P
Printablescolby lachance

Rivian Cup Holder Adapter for YETI 26

This is specifically made for the Rivian R1S and R1T front cup holders. Feel free to message me if you don't have access to a 3D printer. We will be able to figure something out!

Pobrania
159
Polubienia
15
Ocena
5
P
PrintablesLakeKing831

Yeti Colster Extended Lid

Just an adapter for the 12oz can Coster for the slightly slimmer and taller Coors beer cans or similar can. It's easier to put it on the can first then screw onto holder.

Pobrania
154
Polubienia
22
Ocena
0
P
PrintablesWes Pilley

5th gen 4Runner Yeti cup holder

Should print fine without any supports. I used PETG for mine.

Pobrania
152
Polubienia
29
Ocena
0
P
PrintablesQED_Maestro

Tesla Model 3 YETI 10oz cup holder

Remixed to fit 10oz YETI variety mugs and cups. ~90mm diameter. Designed for 2023 Tesla M3

Pobrania
152
Polubienia
22
Ocena
5
P
PrintablesDesignbySteven

YETI Tumbler Replacement Lid V2

Lost the lid from your beloved Yeti tumbler? Here's a printable replacement. The pocket is designed for a 3/8 x 1/8 magnet or a 10mm x 3mm magnet. The magnet will have to be glued in place, unless you modify the size to fit just right…

Pobrania
150
Polubienia
30
Ocena
0
P
PrintablesBoymeetsmill

Handle for Yeti 30oz Tumbler

Adding a handle to the handle-less. I was envious of mom's Stanley. I wanted to make it easier to get my yeti cup which is handle-less. Fits my Yeti 30oz Ramble tumbler style mug I found the original model, but it had a “built-in support”…

Pobrania
147
Polubienia
17
Ocena
5
P
PrintablesBradW

Yeti Cup Holder GemCar

I found this awesome design by Plastic_Innovations and made a few tweaks. I shrunk it a bit to better fit the Yeti 32oz cup. Its not a snug fit which allows room for something slightly bigger. I installed this in my 2016 gemcar and…

Pobrania
147
Polubienia
21
Ocena
5
P
PrintablesShynd

Magnetic Yeti Slider Lid - Smooth

The original source for this STL needed to be scaled to 1000% in Slicer PE 1.41.3 in order to be correctly sized, and I also did not like the 'YETI' logo on the top. Both issues have been corrected. As the original states, stop print…

Pobrania
145
Polubienia
20
Ocena
5
P
PrintablesTarz

Yeti Hopper Cooler Hitchpoint Grid System Collection - Also Fits 1” Molle Webbing & Straps

Have a Yeti Hopper cooler with their 1” strap and loop Hitchpoint Grid and wish you could make it more versatile? Something extra for tailgates, road trips, or a day at the beach? Here’s a start. These designs were made for “hard” TPU,…

Pobrania
144
Polubienia
28
Ocena
0
P
Printablestrevordj

Yeti Tundra Haul Cooler Divider

I printed this in PLA with 5 perimeters all around, 25% adaptive cubic infill on a Prusa XL. It pretty much takes up the entire print surface of the XL so make sure your print bed is clean. I had more luck with using the smooth PEI bed…

Pobrania
142
Polubienia
24
Ocena
0
P
PrintablesTarz

Yeti 16oz Colster Adapter Lid for Bottles

Four sizes of bottle adapter for the Yeti 16oz Colster. Either should be easily remixed, if needed, to fit your favorite bottled beverage. The large (Lg) and extra large (XL) STLs are the most useful. The small (Sm) is of limited use for…

Pobrania
140
Polubienia
24
Ocena
0
P
PrintablesChuckMcM

Blue Yeti-Nano USB cable strain relief

We got a Blue Yeti-Nano for video conferencing, gaming, Etc. It has great sound, avoids a lot of ambient noise and everyone appreciates the clear audio. It has exactly one “flaw” which is that is uses a micro USB cable to connect the…

Pobrania
137
Polubienia
14
Ocena
5
P
PrintablesTarz

Bugaboo Yeti Rambler or Water Bottle holder

Yet another cup and bottle holder to fit Bugaboo strollers like the Fox 5, that utilize the “mushroom head” style accessory mounting points. This is designed to hold the YetI 30 ounce Rambler and smaller. Supports are not necessary, and I…

Pobrania
137
Polubienia
8
Ocena
5
P
PrintablesDangGiblets

Yeti Rambler 26oz Handle

Slim, sturdy handle for 26oz rambler cup. Should fit well, but some M3 bolts allows for handle to be tightened securely. Model is a 2 piece design to avoid excessive supports. Required is 3x M3 sized heat set inserts and 3x countersunk…

Pobrania
135
Polubienia
40
Ocena
5
P
Printablespralidox

Yeti Can Holder Extension for 16oz cans

Extends Yeti 12oz can holder for 16 oz can so that rubber top can be fitted.

Pobrania
134
Polubienia
18
Ocena
2
P
Printablesthall72

Lego Compatible (13809.dat) Minifig Head Yeti

This model is compatible with the lego system.

Pobrania
133
Polubienia
22
Ocena
0