Liczymy pasujące modele…
This is an io shield for the Z440 motherboard. This is required if you recase your Z440 like I did. To get this to fit properly in my case i had to use some side cutter wire snips to trim the tabs slightly but it's otherwise a very nice…
Wydruk około 2,72 €–3,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Werkzeug zum öffnen der Uhr (Batteriewechsel) Batterie: SR920SW / V371 Empfohlene Druckeinstellungen Infill: 20% Infill Layerhöhe: 0,15mm Print instructions Infill: 20% Infill Layerhöhe: 0,15mm
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…
BMW Z4 E85 Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…
Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…
Here I have a pretty basic model for inserting another HDD into the HP Z440 Workstation's drive bay. Unlike the default caddy, this one is friction fit as well as requires four drive screws instead of being toolless. Here is my tinkercad…
A simple Light mount for the Prusa Mini that uses a simple USB light bar (links below). also includes a 3030 extrusion cover to cover the USB cord going down the Z axis extrusion. This version takes a bit longer to print because it allows…
A remix of https://www.prusaprinters.org/de/prints/42868 by Radmaster and https://www.prusaprinters.org/de/prints/41894 by Zelrick This is a mix as two pieces that i like on my Prusa Mini ;-) The pieces have the same position and cant use…
I just took MZ4520's model and deleted the book
This version of the Z42 Prusa Mini light mount is an evolution of the original and is designed to hold a LED light strip. You can wire your own or you can purchase a sewing machine light kit (USB, no soldering involved), install it and…
Close your eyes, rest your head comfortably on the stock in a shooting position and open your eyes. What do you see? Are you looking directly into the scope or from below? When properly adjusted the cheek riser you should be looking…
I pulled the STL into onshape and tried my best to replicate it, but that isn't always easy. It fits exactly the same as the original, except with better clearance near the jets (see the photo of the original's clearance). V1.2 update:…
Récupérateur de douilles pour CZ457 LRP 2 versions, une à "cliper" dessus, et une avec ressort. Pour la version à ressort, il vous faut, donc, un petit ressort, et coller ( ou visser M2 ) les pièces, Casings recuperator for CZ 457 LRP 2…
This is a phone holder for a Samsung Galaxy Z Flip 5/6 to allow you to take advantage of the cover screen in the folded position and use your favorite navigation and audio apps in a 2002-2008 BMW Z4. The mount is cut away on the sides to…
Original cover was warped, so i made a new one. v3 - fixed incorrect location of the hole for screw. v2 - after printing, noticed small reinforcements are no necessery and make cover warp. after removing them everything looks ok.
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. This version has a…
Since I had medium scope rings available after grabbing my Pro Varmint I needed a little more height for a cheek weld. So I played around and designed this model. The original model “Cheek22mm” is what I went with for my comfort. In turn…
Ram cooler with support for the Z440 stock ram fans. -Printed with PLA+ at 50% infill(a few extra grams compared to 10% so that's your call, I just wanted guaranteed stiffness) -Several revisions later and it's a tight fit with better…
voditko retezu YAMAHA YZF450 chain Category: Vehicles
This is simply a baseplate for skinny CZ plastic magazines to make them easier to handle. It does not increase magazine capacity. It is a bit longer and taller than the model remixed from. I have included several versions. A basic one so…
I designed this model as a drop in replacement for the OE ash tray in my BMW E89 Z4. The shape accommodates cups/bottles as well as other odds and ends. Printed upright in 0.1mm PLA with 5 perimeters and 20% rectilinear infill. Organic…
Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…
Alex Zahnrad Z42-M1-H8,5-SW8,6 Die Kürzel heißen : 42 Zähne Modul 1 mm Höhe 8,5 mm Schlüssel weite der 6kt. Bohrung 8,6 mm Dies teil habe ich als Ersatzteil für einen Mini-Papier-Schredder für einen netten Kollegen kreiert.
LA101, CZ457 Single Shot Mag I use for Benchrest shooting with double feed ramps to lift and align bullet into chamber minimising contact to increase accuracy. Taken from my M14 adaptor grafted onto modified CZ mag to fit the LA101 or CZ.…
Reupload because I deleted it by mistake. For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament…
DRZ400 mount for Trail Tech Vapor and OEM light bar. Uses factory mounting bracket and hardware. you will need a couple screws, washers, and nuts to mount the Vapor mount to the factory bracket. You'll also need to use your big brain to…
I recently purchased an E89 Z4 and noticed quickly that there isn't an obvious place to store a drinks bottle when out and about. I knocked up this quick model which can be velcro'd into place on the bottom. October 2024 updates. Now up…
Key tag in the shape of a BMW Z4 E85 phase 2
Tired of picking up your Logitech Z407 remote to switch audio sources? This print bring the buttons that are on the bottom of the Logitech Z407 Dial/Puck/Remote out to the front. Now you can just leave the remote on your desk. To…
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…
This is a remix of this model with added ventilation holes for increased airflow. I use it with my HP z440 but it likely could fit similar models like the Z240. https://www.thingiverse.com/thing:4783713 My Tinkercad model:…
This Adapter converts the e85 into a double din keeping vent functionallity. This is a work in progress. please feel free to remix and modify as there is still work to be done: Vent shape redesign Front facia redesign Vent back shape…
This is my design for Logitech Z407 speakers that allows low profile horizontal mounting of the speaker using the upright mount position. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15-25 Filament: Uzy Galaxy Black PLA
Kulička natahovací páky CZ 457, Bolt knob CZ457
Easy to replace your Washer Cover. Print left or right side cover. Paint it. Pull out the Washer System with your fingers (that's the hardes part ^^). Slide on cover. Done.
Just playing around with designing various bolt knobs for my CZ457 rifle. I have confirmed the threads work but for the initial start of the threading make sure you are lined up well and it goes on straight. I printed mine using carbon…
This is the current version of the LED light holder and filament guide that I've used on the MK3 for several years. Recently updated to use a simple sewing machine LED strip, so no soldering unless you really want to. Sewing machine LED…
When looking over all the sheet holders out there I noticed a missing style. So, I whipped up one with a smooth, curvy 50's vehicle vibe. Print instructions The print in the picture is printed in Prusament PETG Ultramarine Blue, .2 Layer…
This is empty chamber indicator for CZ457 action and a cold bore cap for the barrel. Parts: (2) 6 x 3 mm round magnets for ECI (3) 6 x 2 mm round magnets for CAP (1) CAP (1) ECI
I have designed a speaker holder that connects Logitech Z407 speakers to Nema 100 holes. The speakers are simply attached to the holder. Finally, I used double-sided adhesive tape to ensure that the speakers are parallel to the monitor.…
Print the top near where the skate bearings mount with a modifier and 100% infill. The first balancing stand is actually untested, the 2nd balancing stand is tested, but if you push it the wrong way, without a lot of infill, it affects…
Joined feet so they don't break during removal from buildplate. Also added built-in connection between body and neck.
A Horizontal stand for the logitech Z4 speakers
This is a magnetic empty chamber indicator (ECI) for a CZ457 action. Has a hole to add a banner flag as required. Parts: (2) 6 x 3 mm round magnets (1) ECI Insert
You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)
I do a lot of rimfire Benchrest. I have tried several single shot sleds yet none have really produced a positive result. I came across Steve's sled and printed it out. I like how the bullet sits within the sled as well as the angle in…
This is modified from the original with the following changes. Hole added to the side to mate with the pin of the screwless slim DVD bay of the Z440 case. PCB space modified to hold the PCB from a different brand of thicker 14mm adapter.…
I used Corwell CNC to have it cut out of carbon fiber sheet. It may work printed but it would have to be pretty thick.
I got annoyed seeing empty spaces for screws with atx trays. -May need a pair of pliers or 4mm socket to tighten standoffs. As long as you aren't going too hard, the standoffs will stop once snug. -The opening is more than enough to clear…
5/8 Cheek Rest Spacer Fits Victor Titan Universal Cheek Pieces. Made to specifically fit a CZ 457 Pro Varmint stock.
Suzuki DRZ400 replacement Front Brake Hose Clamp. Model number 59243-03B01. I broke my clip after hitting a cow with my bike (no jokes). From the pieces I had left I designed this replacement clip. Print in PETG to allow enough…
This is just another oil filter tool to loosen and tighten your cars oil filter at service time. The difference is that this one is strong and can be printed without supports. I found a bunch of models online that are great, but I…
A present for a friend Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No Category: 2D Art
This allows for mounting of the Z440's memory fans directly above the ram in a case agnostic way. I printed this in PETG.
This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…
This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…
Nothing fancy just a CZ457 22LR Mag holder I made for my safe. Holds 7 mags total I made mine from Carbon infused PLA 3 perimeters 20% infill I attached mine with Goop glue and let it sit over night before use. I edited this model after…
Dust cover for the front shock absorber of the suzuki drz 400 s/e motorcycle. The cover is in two parts. Both parts are for the right motorcycle shock absorber. A left version can easily be created in the slicer using mirroring. Prachovka…
Made to replace the original ball on my CZ457. Have 2 designs included; preferred the beehive style pictured due to the other having some slightly sharp edges however that might be your preference.
CZ 457 Bolt Knob – Smooth & Criss-Cross, Two Sizes (M6) Tired of the tiny factory bolt knob? This set of replacements gives your CZ 457 a more comfortable, confident grip — whether you're at the range or out in the field. Six variants are…
In short this was designed to give me options for Length of Pull for my CZ457 Pro Varmint with the Boyds wood stock. There are 3 models, 25mm, 20mm and 15mm The fit is not perfect around the edges but I got it close. Once mounted it is…
This is CZ457 ECI magazine block. Fit a CZ457 or 455. Use a one inch key ring to connect the banner with ECI.
I wanted a more convenient way to switch the Prusa Mini on/off so this remix of the display holder to accommodate the the original power switch at an angle on the back. It also covers the top of the display control board to prevent…
This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment). There are two Bosch fruit pulping attachment models that use this part : Fruit pulping attachment MUZ8FV1 , with Spare part: 0103…
This is both a “regular” height baseplate, and a “tall” one to improve handling of skinny CZ .22LR rifle magazines. This version specifically fits METAL magazines. I have a separate version posted to fit plastic ones. There is also a file…
Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp. Printing is done in PETG with 0.20mm height and 0.6mm nozzle. Beside 3D printed parts 4 M3x10 screws are needed and 4 M3 bolts. Also you need rubber strap…
Designed to be as close as possible to the original Logitech Z407 speaker stand. I lost one of them during a move, so I used calipers to measure the one stand I had, created a replica in Onshape, and printed a replacement which worked…
Remix of MZ4250's Baba Yaga Horseman, but recently decapitated for Halloween for use as a hood ornament on the Ghost Car im building for Halloween.
This is something I threw together so I could use aftermarket turn signals in the stock DRZ front turn signal mounts. The specific signals I use this for require an 8mm round hole for mounting. This should work with any other that…
DE: Mich hat die hintere Riemenbügelöse immer gestört wenn man die Hand unter den Hinterschaft legt und ich wollte eine "ebenere" Auflagefläche für einen kleinen Sandsack oder Ähnliches. Schneller Druck in TPU, wird einfach mit einer…
I wanted something different when it came to safety flags and making sure that the action was cleared for RO's and others. So I made this. I based the measurements from my CZ457 Pro Varmint. With a little squeeze the holder pops into the…
This is a replacement for a gear that often fails in the Bosch MUZ4GM flour mill. Printing I recommend slicing with two perimeters and 100% rectilinear infill. While in general it is more effective from a strength perspective to slice…
Used this to fix the internal air diverters in my BMW Z4 e85 dash that were broken and no longer adjustable, Replacing is pretty simple, follow youtube directions for how to slide the vents out (simple once you figure out how to release…
Oil funnel made specifically for filling oil in a Drz400 with the handlebars being in the way
Use this to organize your valvetrain components when rebuilding a DRZ400, it may also fit other bikes. I am almost complete with this it requires a few minor changes (see picture). I am uploading with the hopes someone can change it for…
A custom bracket for the Trail Tech Vapor for a DRZ400 which includes a bracket for the original indicator housing. I designed the bracket so that the indicator housing is angled to suite the design of the Vapor. Two Version…
Extra hard drive slots for an HP Z4 G4 Workstation (made to fit mine, including matching front panel mesh pattern), but should fit most pairs of 5.25" optical slots. Print in temperature tolerant material (PETG tested, ABS/ASA likely…
Got some Logitech Z4 Speakers and they are horizontal underneath my dual monitors. Decided to ditch the stand they came with. Category: Computer
This is my interpretation of the operation of a single bit of memory as used in the Zuse Z1 and Z2 programmable calculators, and later for the Z4 computer. Most information is from pages 218-221 in the book described below. The original…
The cover I had on my car was broken, I made a replacement. Printed in PETG-HF, 0.16mm with 3 wall loops, and Hilbert Curver on the base
Thanks to this project, you can upgrade our beloved HP Z440 with 120 mm front intake fan . This improves airflow to your PCIe cards and internals while also adding the option to install a dust filter , so your system gets cooler, fresher…
motorcycle grips for motorcycle suzuki desperado VZ400 and VZ800, quite comfortable, deliberately made them a little thicker than the original ones. Printed by ABS plastic Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
EBAZ4205 FPGA Case remix of https://www.thingiverse.com/thing:4674827 modified for two push button switches. Print Settings Printer: Geeetech E3D V6 Rafts: No Supports: No Resolution: 0.2 Infill: No Filament: Generic PLA White Category:…
2010 BMW Z4 - E89 - Convertable Original rear luggage cover clamps broke due to age Redesigned with M5-20 Screws and M5 Heatset inserts Print in ABS or ASA
DE: Da ich nichts Gescheites für diesen Einsatzzweck gefunden habe, wurde der Drucker aktiviert :-) Gedruckt in TPU, dann mit Klett auf den Schaftrücken geklebt damit es leicht zum Reinigen abgenommen werden kann. Hat schon 1,5 Jahre…
I like surplus hardware for my mini-homelab and when I wanted to add some additional disks to my Z440, I used these adapters to add them to my 5.25 inch bays. SMART promptly told me they were undercooled and I needed to do something about…
I broke one, so I made one. Hope someone will find it useful. I Don't know if it is compatible to all Hager products. But for me as replacement it works nicely. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Max Rafts: Yes…
DE: einfacher Magazinschuh aus TPU, der über das Original-Magazin (Stahl) gestülpt werden kann um es besser greifen zu können und als Schutz. Zusätzlich kann so noch ein farbiger Akzent gesetzt werden. Je nach Passform des Magazins kann…
just a 3d scan of t he airbox for reverse engineering Category: Automotive
When I started using my resin printers, the need for a drip tray was evident, so here it is. By using the modifiers feature in Prusa Slicer it couldn't be easier to model these items in CAD and then use those modifiers to put perimeters…
Holder for an audio speaker or a mug with a handle. Designed for installation on the right ventilation grille of the metal dashboard of the UAZ469. Fastened with 2 screws. You can insert a can of drink or a bottle with a diameter of up to…
The IRLZ44N is a high-performance N-channel logic-level power MOSFET.
-youll need bolt a few millimeter shorter than oem… maximun 40mm long m6 x 1 -fit all years and fit 14T and 15T sprocket -print with no enclosure but with constant dryer/heater for the filament and creality glue for the build plate -print…
By request, a collaboration with m1xstr, this is a pair of boxes for storage of CZ457, and similar, magazines. Holding either six or twelve magazines, these boxes will accommodate both 5 and 10 round magazines as well as those with…
I'm reuploading my CZ457 stock. The stock is for CZ457 in .22WMR/.17HMR, it also fits a thick varmint barrel. Purpose of this is to have an option for a simple, cheap and reliable ergonomic stock for the CZ457 rifle. The stock has built…
Had to 3d pring one for a larger sprocket while I wait for the larger one to come in the mail Metal one is better (obviously), however, in a pinch, this will do Category: Automotive
