240 modeli
Battery Holder for Hama camera tripod (17 mm diameter), using a Zoom Q2n-4K camera. This is an better alternative to Zoom BCQ-2n battery pack using 4 x AA alkaline battery. The case is made for 10000mAh external battery. Internal…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are a lot of online meetings these days, and you see lots of trouble. The most common one is that someone comes into the meeting. I made a sign board for during zoom meetings. A step file is also uploaded, you can mix, change fonts…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
Working from home? Another Zoom meeting? Let your kids, partner, or literate pet, know you're not to be disturbed! This sign is intended to be printed with a color change at the letters, approximately layer 7 or 1.10mm. It's meant to…
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
Cover for the capsule connector of the Zoom H6e recorder
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A viewfinder cover for a Canon PowerShot ZOOM camera. Incudes a tie point to stop it being lost. Note the cap is not square, and only fits with the tie point in line with the lanyard tie point. The lens cap can be downloaded from…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a zoom knob replacemente for the Libec ZC-9Pro
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
During pandemic I made a Pan-tilt and zoom platform for handy-cams in order to replace cameramen during live events. This is the back-up remote to move the motors in their park position when power is out. This remote uses 2 AA batteries…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
This updated version of my Zoom Phone Tripod tilts to any angle, including tilting forward for those awkward zoom yoga classes. Collapses nicely for storage. This version fixes a few issues: the legs snap into place more firmly, the jaws…
This collapsible tripod for your phone will handle all of your Zooming needs. It's easy to print, requires no supports and no additional parts. Features: -The three legs simply snap into sockets in the tripod base -A screw ring is use to…
This is a wall mount for the Reolink E1 Pro and E1 Zoom that uses a french cleat to mount it to the wall. The mount was designed for the camera to be mounted upside down. There were some mounts already on here but I felt like trying…
Here is my design for Reolink E1 Wall mount. No supports required. Assembly: You will need 2 M3x6 screws to attach with the plate included with the camera to the main body. Cover plate is a snap in design. Wall mount via 2-4 screws.…
Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images). My…
This is the launcher: https://www.amazon.com/Zoom-Disc-Launcher-Catch-Net/dp/B01E5UVTQY?th=1
If you place your Reolink E1 / E1 Pro / E1 Zoom Surveillance Cameras in a high position, you will not be able to see much of the room, especially if it is a small one. With this tilted base you will be able to make the camera frame more…
Zoom Inspired Mask Enjoy Category: 3D Printing
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
This is a 10cm tall stand for a Reolink E1 Zoom camera. The cable can be fed in through the hole in the back and fed out through one of the holes in the foot of the stand. Can be printed without support.
The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…
I needed a laptop stand to raise up my webcam for webinars, so I designed this. Print out two of them and you're good to go! This bracket should work well for a medium-sized laptop, but it can be scaled up or down depending on what you…
6-fin and 3-fin variants provided. Photo shows ‘launcher’ and an original disc that I modeled in case my kids lost or broke the original discs. It was kind of fun to see how the different propellers behaved, the 6-blade flying much lower…
This is a toy key for the Melissa and Doug Vroom & Zoom Interactive Dashboard toy . In the photos, the real key is the yellow one and the print is the red. Print settings: Material: PLA Layer height: 0.2mm Infill: 20% grid Print with the…
Updated 2025-12-13: Added f3d and step files The original Zoom H6 case was far too large for to be carried around daily so I made a much more streamlined case to hold the recorder and the XY mic. Print Settings Printer Brand: Prusa…
This is a light duty indoor 1" curtain/pipe mount for a ReoLink E1, E1 Zoom, E1 Pro camera. This requires: 3x 4mm long m3 heat set inserts 2x 6-8mm m3 screws 1x 10mm m3 screws
After my original wobbly Zoom case broke i needed a new one. This one fits perfect. top and botto, are simply hold together by joints with 25mm M3 screws. The Clamps are also installed with M3 screws. In the Inside you get some extra…
Remixed with longer threads from Thingiverse 4327798 to allow the funnel to seal sit deeper and seal the outlet. Works pretty well, but recommend adding a small O-Ring to stop oil from leaking out when pressing the lever
Inspired by Mic zoom h1 holder by Rukey and Rode Shotgun Shock Mount. Parts should be glued together.The tripod screw is supposed to cut itself into the hole. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No…
Has space for the Zoom H1 audio recorder along with two AA batteries, so you can take it with you while keeping it protected. Simply place the recorder in the bottom part along with one or two AA batteries and snap the case closed. The…
The lens cap Canon should have included in the package to protect the objective lens Print instructions Print in PETG at 0.20mm quality setting, with Archimedean chords as top and bottom fill patterns for better aesthetics.
Post-Printing For the top shell led hole, hot glue can be applied as a light guide. Apply it to the hole from the inside of the shell, but not too much or the PLA might melt! After the glue has cured, cut it flush to the surface with a…
Are you annoyed when you switch eyepieces to take a closer look and have to adjust the Focuser every time, and sometimes lose your target? Try the Turret: set the focus for each eyepiece once and leave it be! Much easier, and more time to…
Soufflet de remplacement pour fourche vélo Zoom disponible en deux hauteur 70mm et 90mm. Replacement bellows for Zoom bicycle forks available in two heights, 70mm and 90mm. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Edited April 2, 2024 This ring also fits the Vortex Sonora 4-12x44mm scope. Sonora is the Crossfire II 4-12x44mm branded for sale to dealers. Two of the stubs don't quite line up but close enough to work without alteration. Original Post:…
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing. It requires a M3 hex bolt and nut to secure the gear to the lens. NOTE: You must remove the rubber cover from the lens ring before installation, the same as you…
Zoom levers a) for scopes with a 43mm zoom knob (Big Nikko Diamond). b) for Falcon T series scopes (Falcon T50,T35). c) for Leupold scopes with 34.6mm diameter zoom ring M3 screws and nuts for the joins. M3 x 30mm along with a nut to…
It is my first published design, so I hope you find it well. I created it to be able to see the whole room from a highly positioned stand (tall wardrobe). After printing, just glue all the parts together. My print setup: Res: 0.25mm…
This Transportbox and Decksaver for the Zoom Livetrak L-6 prints without supports and doesn't use much Filament. You can use PLA or any other Filament. It can be easily stored under the L-6, when not in use. Please feel free to adapt the…
Oleg (alias Rozoom@thingivers) has published some nice models: https://www.thingiverse.com/rozoom/designs including an extraordinary Brougham carriage: https://www.thingiverse.com/thing:778237 After I made a test print in 50%-scale, that…
Design know superseded March 2024 This design has now been superseded by the Digital Bird Mark III design which can be found here: Mark III Latest Update 3rd Oct 23 Fixed a stupid error to parts 001_30_20mm Mot_RightH and 001_30_12mm…
Quick wall mount for a Reolink E1 Zoom. Print Settings Printer Brand: Eryone Printer: Eryone Thinker DirectDrive **Rafts:** Doesn't Matter Supports: No **Resolution:** 0.20 Infill: 20 **Filament Brand:** Eryone Filament Color: Matte Black…
I've re-created a ZoomGear for the Sea Frogs Sony housing (https://seafrogs.com.hk/) Lens Support: Sony FE 16-35mm re-used the gear part from https://www.thingiverse.com/thing:5850202 and added a cylinder to match the lens diameter Add a…
A simple iPhone stand I made for use with Apple TV's new FaceTime feature. I needed it to sit in front of my TV set. The stand snugly fits my iPhone 13 Pro Max with an Otter Box case so it should work fine most other models regardless if…
It fits the Zoom F2 field recorder incl. mic and batteries. I was tired of having this flying around in it's OEM bags. Innersize of the bottom case: Depth: 70mm Width: 42mm Height: 30mm Innersize of the lid: Depth: 70mm Width: 42mm…
Holds your Zoom H1n with and without cutout for port access.
This part was made to replace a broken original lid of an old ZOOM H1 portable audio recorder. It was designed with compatibility to FDM-printing and up to 0.2mm resolution in mind. Printing tips: The optimal orientation for FDM-printing…
I wanted a neater more slimline zoom lever for my field target scope so I came up with this. This is designed to fit on Mk1 Falcon T50, its untried on other scopes so I'm currently unsure if it would fit any of the other Falcon scopes. It…
I use this camera to monitor my 3D printer, but I wanted it to be at least level with the print bed, so I designed this stand. Available in 8 cm and 10 cm, total height is 11 cm and 13 cm respectively with a diameter of 9 cm. The stand…
Uses an M3 bolt and nut. One side is meant to face downward, no supports are needed.
This is mark4 of the DIgital bird focus motor designed to work with any of the Digital Bird 3D printable Pan Tilt heads. Mark4 Takes away the need for Left and right hand parts. Both left/Right hand variants can now use exactly the same…
A custom faceplate for Type A/B power plugs (US, Mexico, Canada, Japan) can be used to mount a Reolink E1-style camera, using the mounting bracket that comes with the camera. Recommend printing with support, using PETG with 100% infill.
MistKing Bracket for ZooMed A Top Wedge bracket for a mistking system. Comparable to this product Installation I have not yet printed this yet. Category: Biology
IMPORTANT: Please check your cameras hardware version! For Hardware Version 1 → Select model: E1 Zoom Ceiling Mount - HV1 For Hardware Version 2 → Select model: E1 Zoom Ceiling Mount - HV2 Print Settings Printed on MK4 with PETG, 0.20mm…
Used a M5x0.8 allen bolt and nut. Print with supports for the underside of the hexagon on the nut. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 20 Filament: Creality PETG Black…
I needed to mount my Zoom h4n pro to a microphone stand so i have designed a mounting bracket for it which holds the whole device in place not just by the screw. I have added a screw stl to it so you dont have to search for it. Enjoy…
I've cut the original box for the Zoom H6 down to fit the detachable mic. I never use the mic, but my Zoom H6 is always out, so this gives neat storage. I've added a small rest for the base of the mic. I've used a soft chair foot…
I wanted to build a wall mount and the first one was too close to the cable and it wouldn't bend… So I "quickly" 🙈 modeled the whole camera… It's as accurate as I can make it (<1mm for 98% of the part I think now). It's good enough for…
This is a cover to protect the built-in X/Y microphones of the Zoom H5Studio, and to separate mics from a dead cat. To put on your Zoom H5Studio, rotate 90 degrees and then slide into place. Then rotate back 90 degrees to fit like the…
This is a modified version of Philip's model. * Added relief cut to help with an easier installation * Machine Screws
SD CARD SLOT PROTECTION FOR ZOOM H6 Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 01 Infill: 100% Filament: filaflex filaflex any Notes: second stl is with supports Category:…
I created the mount for the Reolink E1 Zoom for my P1P maybe someone use the same camera
This is a zoom gear for a Nikon Z mount 16-50 lens, for use inside the Nauticam Z50 housing. This design will require a M3 screw and M3 nut to secure the gear to the lens. Print instructions Category: Camera Summary This is a zoom gear…
You can mount the Reolink E1 Zoom to the adapter which you can adapt to the child bed. (see on pictures).
Mounting plate for Zoom F6 to attach velcro. Thereby, the recorder sits very secure in a sound bag. Additionally, you'd need: 4x M4 with 10mm in legth velcro, obviously ;-) Printed with PETG. So support needed. If threads print weired,…
I scaled down Lopatka's original model to fit my old Sigma UC Zoom 70-210mm 1:4-5,6 lens with Canon EF bayonet. I couldn't find any info about what kind of hood fits this older lens. I've seen a few different variations of this 70-210mm…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
Custom Insert for ZOOM F3 Field Recorder Case This is a custom-designed and 3D-printed insert made to fit a compact hard case (remixed from the design by Whity on Printables.com). The insert is optimized to securely hold and organize…
This solar filter body has an ID (inner diameter) of 91mm so it fits snugly over the end of the outer rubber rings of the lens. For reference, 91mm is just over about 3.5 inches in diameter. I printed the pieces separately to eliminate…
A Zoomer. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This solar filter body has an ID (inner diameter) of 84mm so it fits nicely over the end of the lens with just a little play. For reference, 84mm is about 3.25 inches in diameter. I printed the pieces separately to eliminate stringing…
The Zoom L6 is a sweet little mixer but I don't have much confidence throwing it in my backpack. The mixer goes face down in this case with the ledge supporting the body of the mixer. There are two tabs on the lid that can be heated and…
Supporto disegnato per Obiettivo Canon EF 75-300, originale introvabile sul mercato, compatibili mal funzionanti e ed estremamente costosi. Difetto: Viene coperta la possibilità di passare dalla Messa a Fuoco Automatica a quella Manuale…
The threaded hole on my Zoom H2n recorder was damaged (see picture). So I designed a replacement lid for the battery area that integrates a new threaded hole. The recorder can still stand, and the SD card slot remains accessible.
Hi all, Very simple model, but it will be very useful to people who have bought old broadcast lenses that are missing their zoom stick. Or have lost their zoom stick on a modern lens. Zoom sticks are pretty hard to buy as spare parts. The…
This is a binocular adapter designed to fit an iPhone Xs Max to a Celestron 71404-DS 8X42 TrailSeeker binocular using a Tech 21 iPhone case. The items I am using to make photos with this setup: Really Right Stuff's travel clamp with micro…
Set of zoom levers for the Falcon X50 Category: Sport & Outdoors
A print to help with leverage on the zoom knob for a Bushnell Nitro scope. Uses a 10mm M2.5 screw and nut. Designed specifically for the 5-20x44 model but may work with other models.
Punic zoomorphic Askos (late 5th century BC) The use of this type of vessel was frequent among the Phoenicians, Greeks and Cypriots, being related to the afterlife. In Ibiza there are mainly representations of doves (symbol of the goddess…
Suite à la casse du loquet du couvercle du logement des piles d'origine de l'appareil photo de ma fille, j'ai modélisé et imprimé une nouvelle pièce. Fonctionne très bien, plus resistant que celui d'origine. Imprimé en PETG remplissage…
Zoom H1 Coldshoe Shockmount Upgrade your recordings with this shockmount made for the Zoom H1, compatible with coldshoe mounts. It reduces vibrations for crisper sound quality. Download, print, and elevate your audio recordings! More…
The perfect accessory to straddle your precious volumes whilst working from home. Instantly turn your dusty back bedroom into the perfect home study. Everyone on that video call will know you read books and you absolutely 100% know what…
Halter für eine Reolink E1 Zoom an einem Alufrofil von 40X40. Die Löcher bitte je nach Größe des Nutenstein selbst bohren. Und den Originalhalter von Reolink zur Befestigung benutzen.
This is a set of clips that let you mount Firehouse Technology 2-LED strobes to your DJI Mavic drone. There are 4 clips, 2 front facing, 2 side facing. Each of the “pair” is a left and right side. They mount on the arms and easily clip on…
Canon PowerShot Zoom GoPro mount
Da das Stativgewinde ausgebrochen ist, habe ich diese Schale konstruiert. Das Mikro kann ohne Schrauben leicht entnommen
Man. I had so much fun with this. My family is USUALLY pretty sure about when I'm on a call or a video conference call, but, this just makes sure its nice and obvious. Here's some quickfire facts that should help you get started. Summary:…
This case holds a Zoom H2n recorder and some accessories (on the right part): typically an USB cable, spare batteries, a small powerbank, some SD cards… Note that powering the H2n from an USB powerbank removes the need for batteries. The…
I needed a slim solution to safely transport the Zoom Audio Recorder. This cover snaps into place at the front and back of the recorder, protecting the controls and display. It fits well but is not dustproof. I may change that at some…
I needed to mount my Zoom h4n pro to a gopro mounting stand so i have designed a mounting bracket for it which holds the whole device in place not just by the screw. I have added a screw stl to it so you dont have to search for it. Enjoy…
Storage box for the H6 Essential detachable microphone array. Slightly oversized so you can put some foam in the bottom and lid (I used 4mm EVA foam) and potentially on the sides if you are going to be rough with it ;) I printed the lid…
A simple wall mount to allow the E1 Zoom to be hung upside down. I designed this for holding the E1 Zoom above my 3D printer for both recording prints and also monitoring the gym when the printer isn't running. It should be printed on…
This will ensure that you will not accidentally knock your gain while recording! this remix uses 4 M3-30 bolts to act as a barrier. In Cura, you need to use support on the bottom of the print but I opted to clear the supports from the…
I had a Reolink E1 Zoom lying around and needed a camera with a wired connection for my Core One, this is the result. It mounts to the front left corner. The mount requires either eight 6×2 mm magnets or four 6×4 mm magnets. That’s all…
An shockmount (isolator) for the ZOOM H2n. This design uses a silicone band (wristband) to hold and isolate the H2n. The silicon band should last longer than an ordinary rubber band. It should also be easier to put the H2n in the…
The lens hood only works above 25mm focal length of the lens, below the hood is visible in the picture. The mount works both ways as shown in the pictures, it clicks into place in the used position and can be reversed for a compact…
This is a custom-designed two-part (top and bottom) mounting bracket that allows the Zoom F6 audio recorder to sit securely and solidly inside the Orca OR-268 bag. Although the OR-268 is marketed as compatible with the Zoom F6, the stock…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hSylBgY3XrC My first attempt at remix/editing something new for myself last year. It is a mask lens cap for the Sigma 10-20mm with 77mm filter. It should…
This is a custom-designed belt clip for the Zoom H1 portable recorder , allowing you to attach it securely to your belt, pocket, or clothing for hands-free use. The clip utilizes a standard 1/4"-20 screw for mounting, making it easy to…
Robust belt clip for microphone Zoom H4n Pro. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 1.15 Infill: 30% Filament: Design Devil PETG Black Category: Audio
When i changed my octoprint-camera to a Reolink E1 Zoom, i needed a pedestal to place it on the perfect height in my printer enclosure. For this, i designed this pedestal. Use the base to place your camera and the required amount of…
My kids have a cheap mini zoom-o style toy and they needed more disc. Print at 10% infill, no supports, any resolution. Size of disc: 37mm diameter 10mm center with full center bar 3mm height
