79 modeli
Wanted to make a more sleeker looking cover of my own earlier uploaded Design Print instructions printed on prusa i3 mk3 with PETG 0.15 layerheight The one I printed in the example is a little different because I added an extra Logo on…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed a Garmin Zumo XT mount cover to protect electricity poles of the mount . added a blank face plate so you con easily customize it. Designed in Fusion360 printed om MK3S Print instructions printed in PETG use brim if you having…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in 45 degrees using PETG, support only in plate. You need a M5 hex Nut
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The ZUMO robot comes from POLOLU. https://www.pololu.com/category/129/zumo-robots-and-accessories This is the Arduino UNO version. In order to control it by RC, I made this stand fixed with nylon standofs on the UNO. The RC receiver is…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…
This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…
No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily…
-Print bumper in TPU face down on print bed -Print Visor in ABS or PETG If you like this, please post a review and photos of your creation. Thank you! No supports needed!
A locking mechanism to secure the Garmin Zumo XT into the standard BMW navigation mount. The locking mechanism is split into 2 parts for easy printing and then gluing together. ‘XT Lock Final’ can be used to print the locking mechanism in…
The cover can be printed with any material (ABS recommended) with any layer hight from 0.3 to 0.1 mm The seal has to be printed out of TPU or any other suitable FLEX filament. Even though the seal is optional, concider that a well fitted…
Fits standard 28.6mm motorcycle handlebars and is secured with double sided mounting tape and zip ties. The tape prevents rotation and adds some vibration dampening. Uses 4 M3x16 bolts. You should be able to use any standard key to…
Modular Mount. Baseplate to be added to a GPS Mount/Stant for an Garmin Zumo. Can be changed to a differnet GPS by doing a new GPS Stand. V2 of Garminhold is 1 cm lower above the TFT so it didnt block the airflow.
Same model minus text and logo.
A little clamp to attach the zumo xt to a 12mm bar. I used threaded inserts but you could also drill out the holes and use a washer and nut.
If you use the Zumo XT/XT2 original attachment plate you might wanna use a better cover for the mount. Here is a model that snaps on just like the Zumo unit and covers everything. Print instructions: Might be a good idea to use paint on…
Mount your Zumo on the accessories bar (13 mm) with this bracket. Needs additional hardware to mount: Original mounting bracket 4x M4x25 screw 4x M4 nut 4x Washer, max 10mm If you like my work, consider buying me a coffee:…
Garmin ZUMO XT Dummy for the Touratech Mount. Make your own cover to suite your needs. blank cover included Glue Cover and XT-dummy together. Printed mine without supports Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Simple replacement for original. I have tested this in PETG. It might work better in TPU to help improve water-resistance. Also you may want to shorten it by 2mm or 3mm so it doesn't get accidentally bumped as easily. You must disassemble…
Model of the Garmin Zumo XT2 with attachment plate. Not perfect model* but outer dimensions and mount surface is accurate. Made for base for other designs, feel free to use it to your liking. I have designed holders and will come up with…
Needed to mount my Garmin Zumo XT2 on a BMW 1250 GSA and wanted to use the original bracket. This might also work for the Zumo XT, if the charger is more or less the same as XT2 ( but i have not tried it ). I wanted to mount it without…
Mount for your Zumo GPS, fits 22.2 mm handlebar common on bicycles or motorcycles. Additional hardware needed: 4x M4x35 screw 4x M4 nut 4x Washers max 10 mm If you like my work, consider buying me a coffee:…
Garmin zumo xt mount for bmw 12mm No apto para venta. se agradece que dejen un comentario con fotos y se añada a me gusta.
I created this cover for the mount of my Garmin Zumo 396, so I it would look a little bit better, when I haven't mounted the GPS Unit. Also this should somewhat protect the mount. I would still recommend removing the cover after heavy…
A powered desk stand for the Garmin Zumo XT - and possibly others, the XT2 certainly should also work. You have to source pogo pins, e.g. from AliExpress or eBay. Diameter of the bores in the plastic receptacle holding the pogo pins is…
Zumo XT Mount Cap with Charging Pin Holes
Mounts for the Zumo XT (and maybe others?) and Oxford's heated grips for the AdventureSpec Mini Fairing. There's a pocket where an Airtag can be snapped into on the rear of the GPS mount. Mounts to the fairing face using existing holes in…
These parts allow the Zumo XT to fit into the standard BMW R1250GS Navigator 6 mount and maintains the OEM keyed locking function. The Zumo XT has slightly different dimensions to the OEM system so offset holes need to be drilled through…
Printed it with my Prusa Core One Layer Height :0.25 Infill 40% PEDG
Beschreibung Der Sonnenschutz ist stabil und trotzdem flexibel. Er wird von hinten auf das Navigationsgerät gesetzt und kann im montierten Zustand nicht nach vorn über das Gerät abgezogen werden. Montage: Gerät an einer Schmalseite…
Garmin Zumo XT2 / XT mount cover with Alarm sign and text. It protects the electrical contacts and functions as a reminder or warning that the alarm system is active. Printing Instructions: 0.4 nozzle 0.20mm structural 15% infill no…
Slim mount for Garmin Zumo XT and XT2 gps unit, to use on a 22mm accessory bar. Uses the OEM quickrelease bracket. Requires 4 M4 nuts.
New Zumo XT Mount, I created this Zumo XT mount for my 2005 GL1800. My eyes don't have to drift very far to see the GPS. It is secured with 2 way tape , so easy to remove without a trace. The only downside is that it obscures the turn…
An adapter plate to use the RAM MOUNT phone holder (RAM® Quick-Grip™ XL) on a Garmin Zumo XT mount. With two eyelets at the bottom for attaching a leash for added security. Not tested, but the adapter plate may also work with other RAM…
Voici un support pour le gps zumo xt de chez garmin. il est imprimé en PETG 10% de remplissage il est nécessaire d'avoir deux écrou m6 auto freiner et deux vis FHC M6x60 afin de l'assemblé ensemble. en lien les divers piéces pour le…
standard injection molded mounts have a mounting diameter that is too narrow so I made one with a 16mm diameter for my dad's new BMW R1200 GS. it has mounting holes for recessed M3 hardware
For the Pico-Zumo Support use four M2.5 screws (and two M2 screws for the OLED display). For “Mini Gopro” mounts, use M3 screws and nuts. Other accessories are available here: https://www.printables.com/fr/model/599768-chocobot and here :…
Printed out of ABS and it works fine. Uploading this, the mount lasted allready 2 ½ years with frequent use during all season. Although heat set inserts are needed for the M3 bolts, the M4 bolts, fixing the mount to the handle bar, can be…
no a la venta Adaptador para BMW R1200 R1250GS se agradece que dejen un comentario con fotos y se añada a me gusta.
Replacement seal for a Garmin Zumo dustcap. It could fit other Garmin systems but i'm not sure about that. I printed it without supports or a brim. Printed with flex, Make it a fine print, because it's tiny. Print with the “ribbed” side up.
If it also fits other Garmin holders, please write it in the comments.
Motorcycle cradle mount, stronger than using the car mount. Recommend ASA for this but PETG or even PLA might do as a stop gap. Allows for USB plugin powew which original cradle does not. It should also be possible to power through the…
Another one of those models that are so specific that it probably will be of little to no use to someone else. :) (* I have designed this adapter to fit my Huawei P8 in its outdoor case. But it is easily customizable to a certain degree.)…
Sneezle1980's dummy Zumo is a great solution for when you don't need to bring a GPS, but don't want to stare at an empty Touratech mount nor leave the electrical contacts exposed to the weather. These files are for a Goldwing logo…
Printed out of PETG CF. Needed Materials: 4x M5*45mm Screw 4x M5 Washer 4x M5*10*7 (heat nuts) 4x M4*16 4x M4 Washer 4x M4*4*6 (heat nuts)
Simple stand for your navigator. Made for just storing or perhaps display (not possible to connect USB cable). If you like my work, consider buying me a coffee: https://ko-fi.com/maildannesholkse Check out other Garmin prints in the…
Table stand with adjustable angle. Can be used on table or if you put some rubber on it you can use it on car dashboard as well, and then you can use an angled cable. See pic below. Three different parts to print: Additional hardware…
Rotate the 30x38mm mount by 90 degrees. Needs 4 inserts M4. Best printed with TPU or ASA/ABS. No supports needed.
Mounting materials: 2x socket head screw M6x60 2x socket head screw M5x60 2x self-locking-nut M6 2x self-locking-nut M5 No supports necessary. After printing, pierce the holes with the screws.
This model is a dedicated screen protector for the 6-inch Garmin Zumo XT2. It is a redesign of the original Zumo XT cover to fit the dimensions of the newer generation hardware. Function: Protects the glass during storage, transport, or…
After my Zumo had the rubber cover dissolved after 7 years of external use, I made this to protect from the rain Obs.: Like the internal button of power on/off is made of the same rubber, this project isnt made to make it work, just to…
Apparently these spacers (nr 3 in picture) help with the depth of the Zumo XT on the motormount more/better. I had forgotten mine and lost them, and now the spring loaded electric connectors were bent. Ordered complete new motormount…
A body to go on top of the Pololu Zumo robot. The mounting screw holes match those on an Arduino Uno. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4d3on0ch7Ob
Latch for holder for Garmin Zumo 390. If it also fits other Garmin holders, please write it in the comments.
A quick and dirty design. It fits OK and is attached with double sided tape.
Designed a plate for mounting the Raspberry Pi Zero to a Pololu Zumo robot along with a camera mount. This uses 4 stand-offs to raise the board so that the Zumo base board and onboard motor controller can be used with the RPi. For the…
Brick para Pinypon. Category: Toy & Game Accessories
Garmin Zumo 395 back plate is mounted to the bracket using 4x M4 screws that are included with the Zumo. Press fit M4 nuts from the inside of the bracket. Two halves of the bracket are clamped to the accessory bar using 4x M5 Cap Screws…
Handlebar crossplate for Navigation / GPS mount Yamaha Tenere 700 OFF-THE-ROAD OTR for ZUMO XT Since the crossplate have M5 screws and the base have M4 screws and aren't compatible without a mod of the Zumo base, i made a tiltable…
CFMOTO 650 Adventura / MT Garmin ZUMO XT GPS Mount I drew this up in AutoCad and SendCutSend laser cut this file out of ¼" thick 6061-T6 aluminum, I then cut out my washers, deburred, primed and texture painted. From my seat height and…
This is a spec sized dummy of the Garmin zumo XT2 GPS for motorcycles. The specs of the overall block and screen size are represented as presented on the Garmin website. This model was made just to have an idea of how much space the…
è un adattatore per potere usare più di un dispositivo gps sulla propria moto. Da stampare in PETG o meglio ancora in ABS
I've designed this to mount on my KTM690/GasGas ES700, it should fit on all KTM barclamps, not sure about other dirt or adv bikes. You'll need 4 x M4 10mm bolts and 4 x M4 nuts I printed it with 4 walls in PETG I've mounted a carplay…
Needed a way to store my ZumoXT when not on the motorcycle. Made this holder so i could attach it to the Toolbox and allow it to charge with out damaging the cord and getting lost or scratched. 4 ea = 8x3mm Magnetics
My Zumo 660 cradle wiring bundle has 2 cables that I've never used. One appears to be a 3.5mm audio jack with a round 11mm housing. The other has a 2.5mm hole and an 8mm hex housing. I designed these caps to protect the jacks when not in…
Garmin Zumo XT accessories bar 16 mm
For when you don't want to carry your Zumo XT2 but still want the option to use your phone as GPS without having another mount on your handlebars. Made for the X-Grip with part number: RAP-274-1-UN7U Prints in two parts, assembled using…
A simple Box designed for a Pololu Zumo 32u4 Mini Sumo Robot Three part print on a standard 0.4 nozzle. Should fit snugly together. Doubles as a size guide to check new designs (100mm square frame).
This is a replacement for the Pololu Zumo 32U4 Front IR LED Holder. Remix are welcome! Print Settings Printer Brand: Prusa Printer: Prusa Steel **Rafts:** No Supports: No **Resolution:** 0.2mm Infill: 10% Category: Hobby
I had this celly holder laying around and i came up with idea to fit its mechanism to this coverplate introduced. Garmin isnt the best one to use with premade GPX files like trans euro trail ones, so i made this to use phone apps with GPX.
Under support between mount and existing KTM part is advisable to use 3m double sided tape.
When you already have a Zumo XT installed, this bracket allows you to add a Quadlock phone mount with wireless charging and vibration dampening. The screens end up at about the same height when installing a Pixel 9 Pro phone and Garmin…
Adapter screwed in place of the Garmin Zumo 18-pin bracket for mounting a phone holder. Uses the original screws from the Garmin mount. Designed in my case for my father's Yamaha XVS1300 Midnight Star with SP Connect Plus phone holder. As…
This is a remix of the Zumo XT holder. This holder is suitable for the Zumo XT2. For installation, the original holder from BMW is still used. Needed is twice the spacer and once the adapter. For mounting may require slightly longer…
è un adattatore per potere usare più di un dispositivo gps sulla propria moto. Da stampare in PETG o meglio ancora in ABS
A simple Box designed for a Pololu Zumo 32u4 Mini Sumo Robot Three part print on a standard 0.4 nozzle. Should fit snugly together. Doubles as a size guide to check new designs (100mm square frame).
I've designed this to mount on my KTM690/GasGas ES700, it should fit on all KTM barclamps, not sure about other dirt or adv bikes. You'll need 4 x M4 10mm bolts and 4 x M4 nuts I printed it with 4 walls in PETG I've mounted a carplay…
