Liczymy pasujące modele…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
Keycap de charizard para imprimir
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** When you need to make a boba, coffee, or beer run for you and your group while…
Printed in black PETG with 0.2mm layer height, 4 walls and 30% infill. I would recommend using PETG as a minimum, for layer height you could go to 0.24. 4 self tapping screws are required per side. Update 10/11/24: Added modified cup…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…
Low poly Charizard, the iconic Fire/Flying Pokémon. A fierce addition to any 3D-printed Pokémon collection.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to add 3 blades to a…
Window lifter button for Opel Astra H 2000-2006 Printed in pla it didn't last long, I had it printed in resin from a friend and it has been working for 2 years
I liked the design by @Cisco and decided to make an improvement to seal against the bottle to prevent leaks. Screw the bottle on firmly to get a good seal. If you add this to your collection and/or download the model, please click the…
This model is compatible with the lego system.
3D model of tool Stand for INBUS® 70129 T-Handle Hex Key Set 8pcs Dimensions: L- 201,99mm, W - 82mm, H - 43,66mm Support: Not required Download: includes STL files for 3D printing and instructions PDF Additive manufacturing accessory…
I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…
Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've paired a cam action cord tensioner (4mm paracord) with my Action Carabiner.…
Can be used for any kind of projects requiring accurate measurements of the printhead v006 from anycubic vyper.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and designed a 3 loop + 3 blade…
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
My used dishwasher was missing these. STEP included.
Everything you need to fit modern hardware into a mac pro 2006 case. Print in a suitable material with a glass transition temp of 80C+ (i used abs and asa) Refer to this video for details - TBA
I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers. Update 3/14/23: I printed a piece to compare and my measurements…
Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…
um esperimento que pega partes de brinquedos mortos
central locking buttons, both lock and unlock button. Inserting buttons require disassembly and insertion inside the battery case. On top of the board
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a remix of https://www.thingiverse.com/thing:4124587 . Thanks for the…
EDIT: Slightly improved model, made handle smoother. Do not use PLA, it will melt in the heat! Best to print out of PETG for heat resistance and layer adhesion. It can be printed in any orientation, but not without support. Would…
This model I created to mount the wideband in my GMC Sierra 2006.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Includes STLs for both left and right. They screw into the parcel shelf and mine have worked as intended since 2022. Print in PETG preferably to put up with the car getting hot.
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.
rotated the honeycomb pattern to make it easier to print
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
This funnel allows for easier refilling of the engine oil of a 2006 Toyota Prius. It fits into the opening in the engine block snugly and wedges in between other parts of the engine to make sure it does not move around when you pour in…
Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…
Model designed for 1:76 scale, but can be re-scaled to any scale. Comes with supports for resin printers. More models at https://tramfabriek.co.uk/figurines.html
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print in flexible material or make negative for mold and cast from silicone. This part is quite easy to loose as it sits on top of condenser water container if connected to outside drain, but needs to be placed back into place for…
This model is compatible with the lego system.
A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
2006 Ford Fiesta Keychain, to be either cut in slicer to print it flat or printed with supports. (I did not make the car model, I just found it and remixed it) Thank you for downloading my design. Remember to like the model if you…
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
COMMERCIAL LICENSE FULL COLLECTION PRINT INSTRUCTIONS • 8-15% infill. • 6 top layers. • 2-3 outer walls. • Scale to desired opening size. • Supports not used. MODERN MACHINE© STL files are strictly for personal use. Unauthorized resale of…
Compact case for Riden RK6006 power source V0.2B - one piece cover V0.3 - separate body and back cover (easier assembly) V0.3A - cover with banana holes distance 17,4 mm V0.3B - cover with variable banana holes distance (socket) 18,0 -…
Cutout and Drilling Template for Mecruiser Alpha and Beta Transoms. Includes removable 6mm Pilot Drill inserts for 14mm Mounting holes and alignment with Crankshaft Centre Line. I had to remove 10mm from the outside profile so that it…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
Scraper Bar Replacement for Greenworks Part R0200650-00 for 22" Snow Blowers, Tested working great with my SN60L02 but according to Greenworks should work with the following as well: Product Number Voltage Model 2605902 80V SNB403 2610102…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a 6th iteration of my carabiners - this one with an action oriented…
This model is a remix from Thingverse of “CoolDPS DPS5005 Power Supply” by jopereira , Original design . Model is designed for the rk6006 PSU module, I expanded the design to accommodate an internal power supply. Warning 230 Vac mains are…
Als Ersatz für eine kaputte Sterndichtung bei einer Bestway Flowclear 2006l/h. Eventuell auch bei anderen passend. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 90 Filament: any TPU…
Compact case for Riden RK6006 and DPS5005 module, perfect to reuse an ac adapter from an old laptop or other types of PSU. Required Material for the variable PSU: 8 self-tapping screws: 4/5 mm head and 3/2.5 mm thread with at least 1cm…
Print horizontally, or it will break along the layers (see screenshot). I printed it in PETG with 100% infill, swapped out both sides so the car sits flat.
Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series eg. D3004/602006) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4 for tweeter mount and M3 x 3x 4.2 for pod to mount bottom base Need…
Cover for Pressure steering for Air Suspension Fiat Ducato 250
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just another Honda Civic (2006) Gen8 keyholder... Three models inside: Basic Basic with hole Special wheels and hole You need to enable thin walls parameter to printing the stuffs inside the wheel :) Pick your favourite… :) Happy printing!
Overview This collection is my attempt at creating a crypto currency mining server, using a generic 4U Server Case converted to contain Graphics Cards (GPU). You could also use this setup as a neural network trainer, render farm,…
I noticed a unused sliding lock at the base of the magazine. Maybe it was intended for a speedloader, but Zuru but never released to the market. So I made my own speedloader. I printed this on my modified Ender 3 v2 with the following…
Vintage Video Games - Yakuza - Kiryu Kazuma - 2006 3D printable model.
This is a spare part for a Plissee system used 2001-2006. Those parts are no longer available (at reasonable prices) so I decided to model this "Spannschuh" myself. I used Autodesk Fusion 360 for this purpose and tried to replicate the…
Made this for my taifun headlights to run 9006 LEDs because I didn't want to make a conversion harness. So far the base has been able to withstand the heat from the LEDs. Remove the bases that come with the 9006 LED either by twisting or…
This model is compatible with the lego system.
This was designed quite a while ago for a 1st generation Toyota Auris 3door hatchback. Adapter for the back might also fit the 5door hatchback version... i would assume so. Because this is automotive use i would reccomend atleast PETG…
ADI Chrono A custom case for HT-X3006/3005plus chronograph (24mm) ================================================================= FEATURES A case with style 3 parts build, ready for color combinations Tripod mount thread Direction…
This is a bigger headlight dust cap for a BMW R1200GS 2004 model (confirmed but it should fit newer models as well) for LED conversion. Due to a heatsink or a mini-fan usually found on these types of bulbs, the original cap (part number…
I create this one for the garden contest, I printed the black parts in petg and the pink ones in PLA, if only I printed the whole thing in PLA but I had some petg laying around….. The parts are designed to “click” together, I think it was…
Space Transport Vehicles - Soviet Soyuz TMA-7 - 2006 3D printable model.
My center console latch broke, so I 3D modeled this replacement for it to save $9. It is a drop-in replacement for the original part. I simplified the organic curves on the OEM part to make modeling easier, but it still fits and functions…
Solidworks 2017 Part Category: Replacement Parts
Brackets for additional switches Ford Transit ’06 (2006–2013) For single and double switches. Pictures show brackets compared to dummy plug.
Reloading tray for all calibers .223 → Suitable for 243 / 6,5x55 / 308 / 3006 / 9,3x62 etc Steps/stair design, for easier access to the brass casings. Print in desired filament, no support needed.
Carcasa para llave Ford Focus 2006, se imprimen dos partes iguales.
I printed them using ninja flex TPU on a purse mk3 S+ with a .4 nozzle, .2 layer height, 245 nozzle temp, 4 layer wall thickness, 40% grid infill on a texture steel print bed. with bed supports. with these settings I feel it came out…
This is a replica of the miniature H from the Ral Partha set "Dungeon Party" #98-006 from the Adventurers series. (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:RP-98-006h.jpg&oldid=183849 ) "Cleric"…
Design Concept The design draws inspiration from intricate patterns and symbolic elements, often associated with good luck and protection. The artistic details emphasize elegance and cultural significance. Uses These earrings are stylish…
идеально подходит
Silent Hill - The Armless Man - 2006 3D printable model.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
We had new Radson radiators installed over the summer, but within a few weeks one of the tiny clamps holding down the grill on top snapped in half. Buying new ones is rather cheap, but shipping is crazy expensive. Thus I quickly drew up a…
With six compartments and a section for organizing screws, these trays are stackable with a indexing key to stop them from turning and potentially breaking taller watch parts. More variants to follow soon!!!
Passenger Seat
If you own a GTO (and why else would you be searching for this) you know how fragile that dash panel can be. I found out the hard way… twice. I have had this car for 20 years now, and I've taken that panel off a could time in that time,…
I needed a bench power supply and some research turned up the excellent Riden RK6006 and RK6006-BT (bluetooth). Found a new old-stock blower-fan in my stash and built an enclosure around the RK6006, the blower fan, banana jacks, dc-dc…
Modelled these to fit on the cheap chronograph that you can get on Aliexpress (see screenshot). They are replacing the standard plates. I used new M2,5x5mm screws but I think you can also use the original screws with some minor adaptions.…
Broke the rear seat release knob on my 2006 Scion XA and modeled up a quick replacement for it.
I've designed a Trunk curtain retainer for KIA CEED SW (2006-2013) The original numbers are: for left 859371H600, for right 859381H600 This 3D Model was printed with ASA and ABS filaments. This is my third design in Printables, so please…
The original leg is quite fragile and very expensive. So I made it by my own and you can see on the pictures the original (left) vs. 3D printed (right).
Front Speaker Adapter designed for my 2014 Subaru XV Crosstrek for Kicker DSC650 speakers. This replaces Metra 82-8901, so as long as you know your speaker hole spacing should be easy to adapt for other speakers. This should fit most…
Case for Aneng A3006 remixed from lower model, came out rally good case printed with yellow Sunlu PLA inserts with Sunlu PETG Six M3x20 screws required to assembly it. Thank you
xmax 3 rear cover for 3006 fan
![#0067 Collapsible Compact Cup Caddy [Holds 2, 3, or 4 cups]](https://media.printables.com/media/prints/499578/images/4133830_cd432de2-b200-4728-b1e4-267de0e41e25/rl-20230621-030.jpg)
![#0068 [Remix] Flower Pot Watering Can](https://media.printables.com/media/prints/512078/images/4157852_980007bc-de8b-473f-be22-08de4273be77/rl-20230625-035.jpg)
![#0064 Strong and Compact Carabiner + Cord Tensioner [Cam Action, 4mm paracord]](https://media.printables.com/media/prints/461204/images/3785617_41f239c4-c418-4964-8678-70def4743d20/20230423_165614.jpg)
![#0006 [Remix] MK3S+ RHD Nozzle Fan Shroud](https://media.printables.com/media/prints/145116/images/1371542_26bf8b88-7f8f-4fb9-901f-18c71929ea6a/large_display_rl_20210426_12_145116.jpg)
