Liczymy pasujące modele…
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
Print worked perfectly with PETG, 0,1mm setting. Infill doesn't matter.
Fuji X100V / X100VI camera filter adapter 49mm - angular version II Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of…
UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…
The xpro-3 has a hidden screen and the idea of hiding my screen to be more in the moment of what i'm shooting. Fujifilm didn't announce the xpro-4 so here's my next best alternative. I was inspired to design this when I saw a seller on…
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more common 52mm filters on Fuji X100 series cameras. Model is designed from scratch using BoltFactory Blender plugin. Adapter…
Fujifilm x100vi shadowbox 4Lx2Wx6H Space is optimized so two batteries can also be included Model sits snug, use the eyelets to pull it out if it is too snug, it does not wiggle much. Model stops below the eyelets so you can leave a strap…
Representative model for a 100v Ubox Single
Redesigned ¼" tripod/accessory adapter for Sony Action Cams. Designed for HDR-AS100, but may also fit HDR-AS200. This adapter replaces the terrible original adapter that only has a single mounting point at the front of the camera. I broke…
A mount for Ubox 100V Lite for Pint/X with; LED UART Controller mount 5V Buck Convertor mount WEMOS-D1-mini (Owie) mount 17 front and rear LEDs (SK6812 144LEDs/meter) *need to be trimmed to 10mm 8 status LEDs (SK6812 144LEDs/meter) *need…
This is a TPU Case for Fujis x100v batterys. It fits for the original and third Party. Not testet with PLA!
Printed in Ultrafuse PLA Pro .2mm layer height with lightning infill.
J’ai créé ce thumb grip en impression 3D pour mon Fujifilm X100VI, en m’inspirant du modèle de JCC. Il s’installe dans la griffe porte-accessoire et améliore la prise en main de l’appareil. Le design est simple, confortable, et n’empêche…
Case for an inexpensive Aliexpress power meter - Deek-Robot DC 100V/10A Power Meter measuring volts, amps, watts. Accepts DC input (minimum 7V) via banana plugs or standard 5521 DC barrel (5.5 x 2.1 mm) jack. Embossed text added in Orca…
I tried many of the thumbgrips available online for the Fujifilm X100VI, but none of them felt right for me (apparently I have short thumbs), so I decided to make my own. The model is designed for upside down printing with supports, which…
This pressure washer comes with a hardwired cord that's about 10 miles long, which gets pretty unwieldy when moving it around. This model adds a little “bollard” on top of the handle, which the cord can be wrapped around. The electric…
I have printed this in both PLA with Bambu PLA support for the interface as well as PETG with a PLA interface. Both work well.
This was my first attempt at 3D modeling, I bought the BIQU terminator extruder and while the included mounting brackets are beautifully machined, they are designed for Voron style printers. This plate should work with most Ender 3 and I3…
Base that fits into the Peak Design Camera Cube X-Small with space at the sides for miscellaneous items/strap/extra lenses. Holder includes 3 SD card slots and 1 dedicated extra battery slot meant for the NP-W126S. Another battery can…
Uses 1x2 bases. Printed using PLA at 10% infill. No supports needed, depending on your printer you may want a small brim.
simple wallmount for tp-link archer vr2100v
Two options: Floorplate: make it in copper/alum 3mm sheet Drill holes: make it in plastic and screw to the box, and use it as a template for drilling
Original model: OLIMEX XDS100V3 Case - by: x3on I've made some changes which i found helpful, see the differences to the original model.
This is a 3D-printable hot shoe thumb grip designed specifically for the Fujifilm X100VI . The geometry provides an ergonomic thumb rest for increased stability during one-handed use, without obstructing access to the X100VI's layout.…
I've printed it in PETG, 0.4 nozzle, seems fine
I used a 0–100V DC 0.36" 4-digit digital voltmeter panel meter, a small switch, and a 9V battery.
A ubox100v mount for the pubbox. Meant to be 3D printed, but could probably be made out of metal. Left model as a .step so it can be easily modified for your needs. Uses m3
simple router mount
The latch broke on my x100v, and it seems like this is impossible to buy or get replaced easily, so I made this. It works, we'll see how long it holds up. May work for other cameras of the x100 lineup, but I don't have any so cannot test.…
This is a mount for the vesc controller https://cad.onshape.com/documents/d5ca45786ce166b6a65e9056/w/74cd2b6ca612b579a78
Toroidní transformátor 230/20 100VA kondenzator 10000uf 50v UNISIAN LCD Player Module MP3 28*64 Display Bluetooth Digital Audio Decoder Board TDM157 USB SD BT FM for Car Home Amplifier GBU8K-DIO / 800V / If 8A /Ifsm 180A TZT MH-ET LIVE…
Original model: OLIMEX XDS100V3 Case - by: x3on I've made some changes which i found helpful, see the differences to the original model.
I've printed it in PETG, 0.4 nozzle, seems fine
Toroidní transformátor 230/20 100VA kondenzator 10000uf 50v UNISIAN LCD Player Module MP3 28*64 Display Bluetooth Digital Audio Decoder Board TDM157 USB SD BT FM for Car Home Amplifier GBU8K-DIO / 800V / If 8A /Ifsm 180A TZT MH-ET LIVE…
Two options: Floorplate: make it in copper/alum 3mm sheet Drill holes: make it in plastic and screw to the box, and use it as a template for drilling
https://www.aliexpress.com/item/1005004652373175.html?spm=a2g0o.order_list.order_list_main.127.67141802BpfpaN
Made for mounting to 1.75" tube, allows bottom access door to be open and external mic plugged in. Tough to find a good print alignment and supports. I did: Arm flat, and supports in the end ‘finger’ areas. Cage up, with ‘tight’ supports…
