Liczymy pasujące modele…
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured…
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the…
Although this is designed for a Epson PowerLite Home Cinema 1040, you can redesign the bracket that attaches to the bottom of the projector to align with mounting holes on other models. This is a remix so that the projector is free…
For use on sand (beaches). Might not work so well on other terrain. The bigger diameter (~90mm) gives more room for speed and should work better with bumps. The hexagonal hole is a tight fit depending on your printer tuning. Front wheel…
For the 3mm version you will need 8 M3x12 and the 5mm 8 M3x14. The top front brace was two versions, with built in standoffs and without (will need to print 2 standoffs and brace). Another option is to use the "cut" version, which removes…
This simple design fits into the lid of a Peli 1040, safely holding an Analogue Pocket in place. Without something like this, the Analogue Pocket still fits neatly into the bottom of the case, but falls into the lid if you tip it upside…
Print in PETG using lots of walls and strong infill patterns. Then do a stress test trying to break the mount. If it doesn't budge, carefully use it on a bike.
I printed it out of TPU. Using 1in x 1in low density foam strip on the top lid to hold Pocket in place. Triangle infill seems to work well. 6 top layers will keep the infill from showing through. V7 adjusted pin location for printing with…
got a Rollo X1040 4x6 thermal label printer but wanted a holder for the labels and some other quality of life upgrades I made the post-it note holder area more of a dispenser added TPU feet for below so it doesn't slide around added…
Tolerances are tight enough to work with TPU or PLA.
Designed for Trek Blendr system with duo mount adapter, leaving the second one for any light or cam. You need a standard Garmin (round) mount with the 2 bolts used on garmin stuff. Designed and tested with Garmin Edge 1040. Thanks for…
My set of useful gadgets for the Makita LS1040 miter saws. Preffered filament ABS (for duarbility). ls1040n_dustport.stl - angle adapter for 35mm Makita hose. 1040_clamp+30.stl - 30mm extension for vertical clamp 1040_clamp+50.stl - 50mm…
UPDATE 09.01.2023 Modified it that AP fits with GBA Cartridges.
larger battery holder for WL Toys 104001
This should be paired with my base: https://www.printables.com/model/1320259-analogue-pocket-pelican-1040-adapter Print two straps and they should friction fit in the lid. You can use double sided tape to make them extra secure.
Flexible front bumper for the WLToys 104001 / 104002. Works with default chassis and with the 2mm carbon fibre chassis with my wedge. Print in TPU, model is already in best position, usually no raft and supports needed. Or use tree…
A mounting plate for theHackRF One PortaPack H2 that attaches to the lid of the Peli 1040 case, allowing for the device to be secured within the pelican without accidental button presses.
🖨 Manufacturing Process Type of Machine: FDM (Fused Deposition Modeling) 3D Printer Recommended Printer Models: Prusa i3 MK3S+, Ender 3, Bambu Lab P1P/X1, Anycubic Kobra, etc. Print Technology: FDM only (not compatible with resin or SLA)…
The original bobbin tire in a vintage Kenmore 1040 sewing machine disintegrated. Based on the pieces the original was round on the inside and flat with grooves on the outside edge. I added some knurls to my version. Too bad it's internal…
I upgraded the center gear to use the LC Racing spur gear and part of the regular WL Toys front/rear Diff. I found the instructions for the upgrade here: Once you do this upgrade the gears are exposed and so I created this model to cover…
Print this with latest cura (with arachne engine), 0.5mm width, 0.2mm layer height and perfect bed leveling to have great top surface. You need 30x 5mm M2 countersunk bolts (recommend hex or torx for looks!) + 30x 3mm brass inserts. Long…
Front bumper to replace the original one after updating to carbon fibre chassis 2mm thick with corresponding wedge.
These are replacement tires for the Schuco Micro Racer, model 1040 (Ferrari). These toy cars were made in Germany beginning in the mid-1950s. I created my model based on measurements of the bare wheels and pictures of the tires. There are…
I'm restoring a Makita LS1040 Compound Miter saw for a friend, which also needed the kerf boards replaced. These fit the LS1040. Many other Makita saw models have screw down kerf boards which seem like a better design that this.
I just bought an old Atari 520st(fm) on eBay it was working but one of the capacitors on the 220v side was badly bulged. Since i had a mean well PSU i bought to use as spare for my amiga 1200 and i already built one to use for my A500, i…
PowerCore 10400 Holder for Quest 2 Elite Strap!
Alternative Version of the PicoA10400 shell by Xad & Freddy Pico 10400 Main Project: https://github.com/aotta/PicoA10400 Pico 10400 Alternative Version: https://www.nightfallcrew.com/17/01/2025/picoa10400-flashcart-for-atari-2600-7800/
Requires four magnets with a diameter of 6mm and a height of 3mm For 3mf, load it as a multi-part file. For stl, drag both files together into Slicer and load them as multi-part files. Then set the middle part as a modifier and set the…
Had this PowerBank lying around and needed some battery life for my Quest 2 Standard Strap.
Overview To address the issue of poor sound quality in the rear seats of a Toyota Hiace, we designed a 3D-printed part for installing a Carrozzeria TS-F1040-2 speaker in the ceiling space next to the factory air conditioner. This part…
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
These feet allow for better airflow and raise the keyboard angle slightly. Designed for the x360 1040 G5 with minimal tolerances. Other models might not fit. Use a shock cord to hold both parts together and use some rubber feet to avoid…
Shelf that divides the case in-two, works both with and without the rubber grommet/tray. Angled version included, print with brim and no supports for best results.
Why I made this: I use a Rollo X1040 thermal label printer to print shipping labels at work. I realized that you can buy thermal labels in all shapes, sizes, and colors, so I started using it to print stickers as well! I got one of the…
11,5cm wide front bumper for the WLToys 104001 / 104002. Mountable with two M3*25 screws and preferably two washers.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
I just bought an old Atari 520st(fm) on eBay it was working but one of the capacitors on the 220v side was badly bulged. Since i had a mean well PSU i bought to use as spare for my amiga 1200 and i already built one to use for my A500, i…
These feet allow for better airflow and raise the keyboard angle slightly. Designed for the x360 1040 G5 with minimal tolerances. Other models might not fit. Use a shock cord to hold both parts together and use some rubber feet to avoid…
Why I made this: I use a Rollo X1040 thermal label printer to print shipping labels at work. I realized that you can buy thermal labels in all shapes, sizes, and colors, so I started using it to print stickers as well! I got one of the…
Passt für die Xiaomi Powerbank 10400mAh mit oder ohne Silicone Cover. für Skadis. 3mf Datei mit 0.2mm Schicht, 0,4mm Nozzle, PLA. (OrcaSlicer) -getestet mit Creality K1 Max, Material: eSUN PLA Lite mit 220Grad Nozzle und 60 Grad Bett auf…
Mein erster Prototyp für eine Garmin 1040 Gridfinity aufbewahrung in 3x2. Es gibt einmal die 3mf wo meine Druck Einstellungen sowie negative für die Fingeraussparungen eingefügt sind. Und einmal gibt es eine STL wo einfach nur die…
I needed to put barcodes on inventory but wanted to use lil labels (1.2" x 0.8", here's the ones I am using ). The Rollo X1040 only accepts labels down to 1.57" width, unfortunately. I found this design on Printables (thanks…
I made a blank storage compartment for a Pelican 1040 case and then modified it to make a custom storage compartment for my guitar accessories. The square opening under the guitar slides is to hold a 1/8" x 1/2" x 1/2" magnet that attract…
Restores the original kick of the front axle with the straight carbon fibre chassis. So bottom stiffener and optional top decks will fit without additional stress caused by the bending of the streight carbon fibre chassis. Needs 2*2mm…
