Liczymy pasujące modele…
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Wydruk około 1,35 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 21,96 €–26,84 € nettoWstępna wycena jednego wariantu
These are direct replacements for the Whirlpool WDT710PAYB6 Utensil Rack (part# WPW10671904). Save yourself $20. Printing Settings: Print these in a stronger filament like PETG, ABS, etc. Supports needed
Wydruk około 1,76 €–2,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Christmas cookie cutters with star wars theme :)
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
I made this wrench holder for a friend to replace his stock roller bag for his Bosch Professional wrenches. It should also fit other wrenches in similar sizes. I would recommend PETG as the printing material. Furthermore, the lid needs…
Added a Handle Category: Tool Holders & Boxes
It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…
Based on the very good model of ER605 & OC200 Rack Adapters (V2) by Sorcier, I remodelled them to fit 2x TL-SG2210P. It's a heavy device, and 2 of them in this pair of brackets are recommended to be supported, either by support angles or…
Spend $20 for rack-mount ears for my Cisco 10-port switch!? Forget that! These printed ears are MORE than strong enough at 30 percent infill, even with some other stuff stacked on the switch in the rack. My SG300-10P used 12mm long M4…
This is a remix of the 10pc wrench holder of loserkid418 . I added some screw holes to fix it at the wall.
Added a Handle Category: Tool Holders & Boxes
This adapter allows you to rackmount this TP-LINK PoE Switch. It holds both the device and the power adapter. There are no problems with airflow, so the switch doesn't overheat. Simply join the two parts with long screws and it will hold…
200PL and 410PL quick plate compatible design. Now with 375PL model. You can get any length if youn use the OpenSCAD file. Print upside down, no support needed. All holes are tailored for M3 internal hex head screw.
I could not find a hose connector on this site for a specific Shop-Vac hose size and Dewalt Miter Saw Dust collector, so I made one! First model, lets GO! I have the shop-vac hose of 1-7/8" inner dimension at 1.76" for a little more space…
This battery cover mod enhances the stability of the Futaba T10PX transmitter. Designed to replace the stock battery cover, which can cause the T10PX to tip over easily, this mod adds balance and prevents falls, making your transmitter…
I got a request for a version of my bit holders but for 10 bits only so I made this.
3x2x3-ish Gridfinity print to help organize the 10-piece Pittsburgh deep socket set from Harbor Freight. https://www.harborfreight.com/12-in-drive-metric-high-visibility-deep-socket-set-10-piece-67873.html
I had a couple of the body clips on the headlight trim break on me so I modeled up some replacements. These print on their side with no support needed (I modeled all needed supports), you way want to add a brim. Material: ABS Wall loops:…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
This is a simple oil filter 1/2" socket adapter for a 97' Diahatsu Hijet. Filter part number: 16510-81403 and 15601-87703 Shape 14 sided, flat to flat distance of approximately 63.8mm I printed it in Black ABS with 5 walls and 50%…
Reverse engineered quick release plate for Manfrotto 410 geared head and compatible heads
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Imprecion sencilla, no requiere soportes. Tiempo de imprecion. 1 Hora y 15 Minutos, aproximadamente. Requiere una cantidad de 25g de PLA. Modelo impreso en ANKERMAKER 5
A remix of the TagConnectClip to fit the BeagleY-AI between the USB Headers. Adds a nice comfortable handle. Print in PETG with 0.2mm Layer Lines.
This is a handle for draws and cupboards which includes a pattern on the front generated by the Commodore 64 one-liner program 10PRINT. If you want to learn everything there is to know about 10PRINT I highly recommend this great book by…
This is a 6.5" speaker mounting ring that I designed to go into my '97 Diahatsu Hijet doors. Note that the window does not interfere with this location and there is plenty of depth for fairly deep speakers. I used these for the generic…
A friend of mine lost the rackmount wings to their Netgear GSM4210P. The screw holes are for M3 countersunk hardware. Print Settings Printer: Railcore 300ZL Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Atomic Carbon…
I couldn't find a 10" rack mount for a SG2210P which was designed for the ports facing forward. This model has a gate at the back (press in using the bar closest to the "teeth") to stop the switch sliding rearward when you plug in network…
Added a mod if you alredy printed the 8pcs version, just use super glue to attach it.
Pittsburg 10pc 3/8 drive Wall Mount Socket Holder.
Airwaves Gum Case: Holds 10, slides closed for pocket-friendly gum storage.
Note: the reason the image is different is because it was originally designed for another print but I realised it could be its own part
Holder made for Mercusys MS110P, 10-Port switch, 8-Port PoE+ to be mounted in standard 10" rack. Switch can be mounted with screws thru standard wall mount holes but does not need to. Fits pretty tightly. Printed facing down and at 45°…
My original design of a MinSaw for Mr. Baddeley's Ultimate Chopper. Read the README. Print Settings Printer Brand: Prusa Printer: Prusa i3MKS+ Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: PLA Category: Model Robots
I bought reamers of amazon which didn't came in a case, Since this a precision tool, i made a case to protect the reamers and especially their cutting edges. The sizes for the reamers are given in this table, please check the length, or…
This is a file for single print of the Utility Arm frame for Chopper. It goes in Mr. Baddely's Ultimate Chopper. I have modified his files to include provisions for am upcoming trading card dispenser. Important information about this…
Printed with 0.2mm nozzle PETG
9 piece SAE Snapon Wrench holder for 7/8, 13/16, 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8 10 piece Metric Husky Wrench Holder for 19, 17, 16, 15, 14, 13, 12, 11, 10, 8 Both or at least one will fit a large variety of sizes with the taper.…
not so fancy but does the job, for a solid print with pla , i use mine daily printed with ngen flex
Width is 3 units, height 4 units. Use Z height cut in Prusa slicer if you don't need stackability.
Updated to increase the length of Reamer 3 and for color printing.
This project is not finished yet. I am actually testing it and it works just fine. I will try to improve it over time. It was printed with PC Blend Prusament with 60% infill for extra stiffness. I will include the used bolt sizes later.…
Store up to ten (10) Vallejo 0.57 fl. oz. bottles
Here is the Earpick, designed to be gentle when using due to flexible neck and rounded corners. Made for single use and a breakaway base to make storage simpler. Printed at 0.2 layerhight and with 15% infill on a Flashforge 5M (and 5M…
Based on and Remixed from the fantastic solution from Tim Hebel. This version is designed to be a little easier to print and to customise based on the variety of possible components. Print: Recommended minimm of 3 walls (perimeters) with…
Designed for Magents to be glued into place. Required Components 12x3 Magent x 2
Connector housing, Dupont 10Pin 12mm Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ or https://nerd-corner.com/dupont-connector-v1-1/
I wanted to get it modeled and posted, just in case somebody lost theirs. Not sure what materials would be best for engine temperatures. A piece of steel or brass could be used to replicate the stick and the handle could possibly be made…
These are the end caps for the hollow top rails on the tailgate and bed sides of an S110P Daihatsu Hijet Japanese mini truck. These end caps are often damaged or missing on older mini trucks and it may be difficult to source replacements…
Tire Valve Cap for my John Deere Z335E lawn mower front casters. Modified from https://www.thingiverse.com/thing:1513169 by filament_required Modified in FreeCAD. Ender 3 v2, Generic ABS, 0.4mm nozzle, 0.2mm Layer height.
Use any color/filament you would like. Remix and experiment with different models. Make sure to use at least a .2mm resolution because it might snap off easily.
This brace and battery mount/case is designed to hold two(2) SLA (sealed lead acid) batteries to power your droid. The brace fits the standard Chopper frame from Mr Baddeley. Print : Recommended 3-4 perimeters (walls) with 10%-15% infill.…
This is a Wheel Lock Key Holder for Matco Tool-Grid Tool Box organizer system. Holds 10 22mm Hex Wheel Lock Keys however I made the diameter of the sockets 26mm for a loose fit and ease of inserting and removing the keys from the holder…
The files are named the colors that they are supposed to be. To put it together you put the parts into the slot they fit into. The leg with a green top goes on the left. You put the black parts in first, then the yellow parts, then you…
This model is only compatible with the Chinese version of the TL-SG1210P switch. It's not designed to be compatible with the US or other countries/regions' version. For more information about this switch Special thanks to the DeskPi-Team…
Small desktop holder for mSata SSD cards & older Mini PCI-Express wifi cards Category: Organization
Use any color/filament you would like. Remix and experiment with different models. Make sure to use at least .2mm resolution because it might snap off easily.
This project is not finished yet. I am actually testing it and it works just fine. I will try to improve it over time. It was printed with PC Blend Prusament with 60% infill for extra stiffness. I will include the used bolt sizes later.…
New version with better fit and thicker walls for more strength. This is for any printer with a door that has a gap at the top of the door. Mount for a Tapo C101, C110, C111, or C110P2 camera.
This is a support bracket for the 10-Port PWM Fan Hub found on AliExpress: https://www.aliexpress.com/item/1005003283046039.html?spm=a2g0o.order_list.0.0.21ef1802FYO1Yq The board mounts with the double-side tape that came with it.
I created this phone mount base for a phone mount that I bought, since the original clamp mechanism didn't clip on my dash properly. This base is made to fit into the rightmost dash bolt hole. Just remove the cover and the M6 screw.…
Store 10 Dremel Bits and set them securely on any magnetic Surface. Magnets - Harbor Freight: 8mm Neodymium Filament Suggestion - PETG
Redesing and adaptation of old juggernaut impct case Compatible cross with juggernaut mounts Can be moddified to fit any smarthphone Field tested Category: Sport & Outdoors
Bern-Coaster with Stacker for 4, 6 or 10pcs This Coaster shows the flag of Bern and is printed in 4 Colors with single extruder. Color print order: Yellow White (at 1.0mm) Black (at 1.4mm) Red (at 1.8mm) Black (at 2.2mm) If you don't like…
It was designed for a reamers set from Aliexpress (10pcs HSS, 3-12mm), which was sent in a soft package.
Simple case for 10pcs of tweezers. I needed to organize my set which came only in cardboard box which was way too big to use becasue it took to much space.
This is meant to replace the OEM bed latch bushing on a Daihatsu Hijet S210P. It should fit other kei trucks that use similar style latches and protectors. Only one of the 4 latches on my truck had the OEM-style bushing, which was a…
Gridfinity Impact Socket Holder for Performance 10 Piece 1/2 Inch Drive 6 Point Metric Socket Set M593DB
This is a pair of ears to rack mount certain versions of D-Link DGS-1210-10P PoE switch. I have several of these switches. Some versions are wider than others. These fit the 278mm-wide version with eight RJ-45 jacks and a pair of SFP…
This is meant to replace the OEM bed/bumper stopper on a Daihatsu Hijet S210P. It should fit other kei trucks that use similar style protectors. This should also be able to replace these part numbers: OHNO SZ-2127 / DH-2136 Suzuki…
Patas elevadoras para CNC Atomstack A10Pro v2. Base + 4cms, 7cms y 10cms.
Here is a set of simplified meshes of the dash of the '97 Diahatsu Hijet S110P. These are cleaned up and simplified meshes, I had to perform quite a bit of post processing since the source files were hundreds of megabytes. I used MeshLab…
WARNING: Reagents are very corrosive and will eat PLA for lunch. I printed these in PETG which is ok but not as good as PP. So, print in PP if you can. See here: https://prusament.com/chemical-resistance-of-3d-printing-materials/
Hi, To protect rear mudguard I made special feet. 5 holes made in model are aligned wit orignal holes in deck. I reccommend to use PETG due to temperature restistance. Bottom layers = 5 (which is top layer after printing Infill 20%
Updated power bay for Chopper - the details have been added to the model and the yellow detail and triangles are split off on to separate pieces for easier painting before replacement. Print details at 99% for better fit. Category: Props
If you like to update your printer's firmware and it doesn't work via USB port the motherboard doesn't have the bootloader installed. Also if your board just doesn't have enough program space you can upload the firmware directly via ISP…
A phone charging station for 10 phones 28º lean angle for Iphone 15 Pro Max total dimension is 324x160x39mm
By default this type of switch doesn't come with either a rack or a wall mount, but i wanted to mount it on a wall vertically. You need an M3 screw, at least 10mm long. I guess it should work with other switches from the same…
https://s.click.aliexpress.com/e/_mMzDlzd
This model is made for a standard 19 inch network rack. Simply print two of these and they sandwich the switch. The front has a cutout for a nameplate.
Case HDD Festplatte Zidoo Z10Pro um eine über SATA angeschlossene Festplatte unterzubringen. Ein ähnliches Modell existiert hier schon, dieses passte aber nicht auf mein Druckbett von 220x220mm. Die Füsse des Zidoo werden abgeschraubt und…
Just a simple, easy, fast printing light diffuser for the SP10Pro. Friction fit on the head as per my light. Easy to scale up/down a little for clearances. I've included 2 files, one straight off the diameter of the light plus 1.6mm for…
UPDATE v2 16/10/2019 New version, more stable :) Using the beautiful plate designed by Boubobo, I added a support to attach a STARBLITZ AC 50/600 AZ 1 telescope, to have more control over where the telescope points to than the original…
E6 (also E3) 10pf ~ 10uf capacitor labels for Harbor Freight 40 bin organizer (2 values per bin) NOTE: Due to the small font required, cleanup of the print may be required. Try to use dry filament is possible. There seem to be 2 versions…
I was looking for a good way to mount a lens for Chopper's radar eye to my TinyP dome in a way that was secure yet removable, so I came up with this. Uses this lens:…
Magnets 4x3mm (8pcs) No supports
Gridfinity 6x3x4. All my SomeLine cases are 6x3 for uniformity.
An organizer for 10pcs. of 35mm film canisters. Opening in the organizer is Ø34mm. Optimized for Prusa MK3S build plate size. The canister organizer allows to store multiple cannisters in a neat way. As I always have multiple cannister…
Maker Chip Blank Sun/Gear Inspired design with 10 points. 3MF file with multiple parts for easy color change. Play with the colors to make deferent patterns. Designed to print on a multi color printer with 0.25 nozzle but results may…
Maker Chip Blank Hearts design with 10 points. 3MF file with multiple parts for easy color change. Play with the colors to make deferent patterns. Designed to print on a multi color printer with 0.25 nozzle but results may vary. Adjust…
This is an AMX-10P scale model of a real french armoured vehicle for display and diorama use, a 3d printable stl ready for 3d print, 3d print model and military vehicle diorama. It’s ideal for display shelves, tabletop battles, or as a…
Tylnia stopka do Laotie ES10p. Przeznaczona do montażu z oryginalnym błotnikiem. Stopka chroni błotnik przed przypadkowym uszkodzeniem po nadepnięciu. Poprawiona wersja V1
This adapter/platform allows you to easily use a U1/U1R battery with the original battery hold down bar. For simplicity, a U1R battery is recommended, as it will not require adding length to the battery cables or cutting any tie downs for…
I designed these to work with a font size 10 typeset for letter pressing. Included are designs for: 1.76 - EN 3.52 - EM 7.03 - 2-EM 10.55 - 3EM Also included are two leading (or vertical spacers) of 1.17mm height at 50mm and 110mm wide.…
This is a wall mount designed specifically for the Hoover Go Pet HFG10P 011, 0.55 L, 200 W stick vacuum cleaner . The mount allows the vacuum cleaner to be stored vertically against a wall, helping save floor space and keeping the vacuum…
I did not want a server rack cluttered with patch cables that ruin the visual aesthetics of my front panel ! I chose a TP-Link Omada SG2210P switch with the RJ45 ports routed to the rear to maintain a clean design on the front face of my…
Držák senzoru BAUMER FHDK 10P5101
![EXTENDED Hex Pencil cap for snapped pencils (10pcs) [2X TALLER]](https://media.printables.com/media/prints/301014/images/2632520_750a34c3-c35c-4fbc-bf9c-2f59f848a35c/screenshot-2022-10-23-141452.png)
