Liczymy pasujące modele…
I redesigned this from scratch to build my Fusion 360 skills, but it's clearly inspired by the original Prusa Lack handles. There are slight visual differences, but the functional difference is that recesses are added for 20x10x2mm…
Wanted to use this rear frame part remix along with the main parts from the original model, but I didn't have any 5x5mm magnets on hand. I remixed it to work with some spare 10x2mm magnets I had laying around. Parts: (2x) 10x2mm Magnets -…
I have added holes for 10x2 mm magnets
Love this mod, but I didn't have any 5x5mm magnets on hand. I did have some spare magnets in various sizes like 10x2mm, so I remixed the blank front part and side frame part to work with 10x2mm magnets. Also remixed the regular front…
A remix of a remix of a remix! This model has 5 holes for magnets with a diameter of 10 mm and a thickness of 2 mm. Printed with a 0.4 nozzle and the 0.2 mm structural preset on my CoreOne using Prusament PETG Prusa Orange. As you can see…
Changed top magnets from 9.5mm x 2.5mm -> 10mm x 2mm as they are more easily available in the EU
The gauss cannon is a great thing, but I only have 10x2mm Magnets. So I created an adapter, that fits into the referenced model (use the 3mm variant). If you would like to adjust the adapter to your dimension, feel free to change the…
This is a Sharpie holder that fits a standard marker and one or two 10 mm x 2 mm magnets. The marker will fit loosely around the bottom/middle, or a more snug fit near the cap, depending on if you want to take the marker out of the holder…
Hello all, This is a remix of @DominikValecek_94673 's excellent and minimalist design for a print sheet holder (build plate holder). This is rather similar to Dominik Valeček's design, but with 20 x 10 x 2mm magnets. I printed this with…
This is a remix of sidoh's door handles for the Prusa Lack enclosure with 20x10x2mm magnets. They are designed for 2mm thick acrylic sheets (instead of 3mm in the original).
Should be able to print as oriented. I used Prusament PETG Galaxy Black with a 0.4 HF Nozzle and the 0.25mm STRUCTURAL profile for the Core One. Other filaments and settings will probably work just fine.
This Remix uses 2x 10x2mm magnets and a roughly 9mm long piece of TPU filament as Anti-Slip feature. Installation: Cut a 9mm long piece of TPU (or similar filament types) from your filament spool and glue it into the slot of the hook.…
Just a remix to fit magnets 10x2mm For adjustements the step-file is included. Printorientation see on the picture
I adapted the 20mm wider model for a 10x2mm magnet.
A simple tool holder for the tools etc I use regularly when changing filament or fixing a clogged nozzle on the Bambu printers. Cutter Plier Liquid Glue Flashlight Filament clips 2 Allen keys (size 1.5mm & 2mm) Printed in Lime Green PETG…
Make sure to add the pause in your Slicer of choice on layer 12 before printing so you can insert magnets!!!! These are standoffs designed to let you mount boards to metal pieces using 10x2mm Neodymium Magnets. The 3MF files have…
Remixed for 20x10x2mm magnets as I found this size cheaper than Prusa Original size of 20x6x3mm. Example of magnets I bought:…
Original camera was no longer available, so I purchased this webcam on Amazon and it fit perfectly. https://www.amazon.com/dp/B07QP6G5JV (no affiliation) I also spliced a ZH 1.5mm socket (the connector with visible pins) to the end of the…
Easy to paint in your slicer for printing with mmu3 / ams like systems.
Simply slide in a 10x2mm neodymium magnet in the pocket (no glue needed) and glue other 10x2mm magnet to the surface of door etc. I use mine to keep door closed against foam for extra sound proofing my printer in diy enclosure made of…
Have fun and please share your comments and models. Happy printing...
The same model but adapted to fit 10x2mm magnets instead. Also added the baseplate for all the files
Have fun and enjoy, and please share your comments and models... Happy printing...
A small glue on bracket that fits a 20x10x2 magnet which glues into the side of the poop chute design by @KevinV_460266 https://www.printables.com/model/461345-bambu-poop-chute This bracket holds a neodymium magnet strong enough to hold…
I glued them in with super glue. You'll need: 2x - 10mm x 2mm Neodym Magnets I printed mine in PETG. After that i drilled the guide bore with a 4,2mm drillbit. It keeps my filament ptfe guide tube from getting tangled in my prints because…
Added 20x10x2mm rectangular magnet slot. Follow the original model printing advices.
Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man alles was magnetisch ist (Co2 Kapseln leer, leere Hülsen, Schrauben und und und) als Ziel beschießen kann. Der Abstand zwischen den Magneten…
I have different magnets so I made a new one. Solidworks file included.
This Mebus Thermo-Hygrometer Model ATN0120, like "Krontaler" as well, is capable of measuring humidity starting at 20% (in contrast to other relatively cheap hygrometers, that start measuring humidity at 30%). The identical proportions…
ganz einfache halterung zum einfügen von 2 magneten mit den maßen 10x2mm
Simple magnetic pin made of two parts. Insert magnet and glue together. 2 part design prevents magnet from scratching sensitive finishes. Bottom is .2mm thick. Thus, print the bottom layer .2mm thick. I printed the rest with a height of…
If you have a HSW mounted with magnets and it is sliding adding a two rubber feet might be enough. Your HSW will still be removable without wasting powerstrips or something similar. Before that I tried 8 magnets mountes but it kept…
Instead of four 20mmx6mmx2mm N52 magnets, this remix utilizes six 10x2mm magnets.
Hinged card box with inserts for 10x2 mm magnets. Based on tjdesign's card box.
Lootbug with holes for 3 10x2 magnets. These hold very well. Print eyes with a brim. Print Settings: 2 walls, 15% Gyroid infill. Happy Printing!
I remixed the purge bin from @Ed_2353368 for the Core One to allow larger magnets. I could only find 20x10x2 mm magnets on Amazon. https://www.amazon.se/dp/B0DZXQ5MKL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
This is a remix of the original Core One x6 plate holder by Xtr3m3. The original magnet sockets have been changed to fit 20x10x2mm (larger surface area) and 20x5x2mm magnets.
ganz einfache halterung zum einfügen von 2 magneten mit den maßen 10x2mm
Simple magnetic pin made of two parts. Insert magnet and glue together. 2 part design prevents magnet from scratching sensitive finishes. Bottom is .2mm thick. Thus, print the bottom layer .2mm thick. I printed the rest with a height of…
I have different magnets so I made a new one. Solidworks file included.
Have fun and please share your comments and models. Happy printing...
Have fun and enjoy, and please share your comments and models... Happy printing...
The same model but adapted to fit 10x2mm magnets instead. Also added the baseplate for all the files
These trays are designed to hold small screws from your latest disassembly or creation. The linear tray is 5x1 and the square one is 5x5, each segment gets its own 10x2mm cylindrical magnet which can be in any orientation. The two plates…
Bring a touch of desert charm to your fridge or magnetic surface with these adorable 3D printable cactus magnets! Designed with simplicity and aesthetic appeal in mind, these miniature cacti come in three unique styles. Each cactus and…
I wanted a cleaner option that didn't require glue or epoxy. I used 10x2mm round N52 magnets. 10x2mm N52 magnets Amazon https://www.amazon.com/dp/B0F4CDKM9J?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
A Poop Chute for the Bambulab P1S adapted to different magnets (10mmx2mm).
Remix of https://www.printables.com/model/175178-magnetic-case-for-apple-tv-4k-remote with 10x2mm magnets
I needed a way hang some light curtains in my workshop. So I printed these magent holders, while printing added the magnet and then sewed the holder to the curtain. The magnets are from amazon (no affiliate link)
Remix for 2x 10x2mm magnets.
I modified the original STLs in Tinkercad to accommodate 10x2mm magnets which were laying around unused. The original design used 2 different sized magnets but my remix seems to work fine with a single size. Printed with a layer height of…
Great spacer for the glass top of the Bambu Lab X1C, remixed to use 10x2mm magnets
You might need to trim a bit!
Remixed for my magnet size. THANK YOU FOR INCLUDING THE STEP FILE!
