Liczymy pasujące modele…
Zweite Auflage, da die erste recht gut ankam. Anhänger zum beschriften mit DYMO Klebestreifen (12 mm breite) um Schlüssel oder andere Sachen zu kennzeichnen. Ich habe die Außenkontur etwas verrundet und 2 weitere Größen hinzugefügt (20 u.…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This model is based on eedev's fan frame with the pogo pins on the side. In my case i didn't need the cutouts for the pogo pins as I was using the original cables and it was harder to print with supports in PETG. So I removed the cutouts,…
Wydruk około 3,79 €–4,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed. label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one,…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…
This spacer is designed to maximize airflow with minimal noise impact, almost no added noise compared to running the fan unrestricted. I recommend using at least the 20mm version to ensure enough clearance for optimal airflow. 120mm: •…
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
Model of the Noctua A12x25 Model for folk wanting to enter the Major Hardware Fan Show Down. STL, STEP and F3D files are included.
These covers can be used to make the beige Noctua-AF12x25 fans blend better into a custom pc build. There are versions for a single fan a full cover for radiators using 120 mm fans - the design is modular a front cover for radiators using…
Leave a comment if you'd like another file type for this model.
Einfacher Ständer für externe USB Festplatten. Unten am Boden kann man kleine Plättchen aus Gummi oder Filz anbringen. Für eine maximale Festplattengröße von 110 mm Länge und 22mm Dicke. Versionen, für 4, 5 oder 6 Festplatten. Gedruckt…
Perfect fit for Neodymium 12x2mm magnets https://www.amazon.es/gp/product/B008U9SDI4 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Animals
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
PC Intake turbo compresor alternative turbine for Noctua A12x25 made for MajorHardvare's fan competition, the exhaust pipes are for better spreed of air in test radiator, they are not intended to use in pc only the turbine and front cover…
Lightweight baseplate for Gridfinity to use with one 12x2 mm magnet. Printed with a 0.6mm nozzle at 0.3mm layers. The fusion file is included so you can make the grid as big as you want, I included a few that I made for personal use. Here…
Fan mount for a 120mm fan above the psu/graphics card.
This is an adapter to mount a noctua 120mm fan (each version should, e.g. for me NF-A12x25 fan) to a minisforum um 790 pro. This allows for super silent operation. For the assembly first unplug the power supply on your minisforum. Then…
This thing is a quick-release (or snap-on) adapter to mount a Bushnell 12x25 foldable binocular to a standard quarter inch tripod mount. For a binocular with a 12x magnification it makes a huge difference to prevent it from shaking by…
You can organize your cutlery.
The center axis of the original design does fit the m6 and m3 screws, but i super glued them in my assembly anyway. Shown print uses Jessie Premium PLA in Green Ice color. I'm including the freecad file I created in case anyone wants to…
Four different models for mounting 2.5" SSD in a 3.5" HDD rack. Two versions, one holds 12x7mm SSD's with about 1mm of space between them; the other holds 10x7mm SSDs with about 2mm of space between them for better airflow. Both have a…
Elevate your filament sampling experience with these custom-designed Bambu Lab filament swatches , meticulously crafted to showcase infill patterns like never before. These swatches feature unique, see-through designs that make infill…
lego technics brick 12x2
Double version of the NA-IS1-12 Spacer to fit 2 120mm fans side by side. Additionally I modified the inner radius of the spacer to better fit the NF-A12x25 fan. In the picture you can see the size difference compared to the original part.
Uses 12⌀ magnets
Designed to increase surface area like an old biplane, each blade has an overall “airplane style wing” but relieved and angled to possibly “compress” air vertices to orient correctly and exhaust them while and scavenging low pressure…
Modified the mag plate in the original model to support 8 12x2mm magnets . I highly suggest printing the dishwasher sign with the least amount of material as possible so the magnets can hold the sign or get stronger magnets. I had to sand…
Coupling 5x8x26mm NEMA 17 Stepper Motor Coupling 5x12x26mm NEMA 17 Stepper Motor
An index wheel for open-segment bowl making. Two rows of 12 holes allow for offsetting from the previous row. You will need three segments & three aligners to complete the wheel. Glue them to a ø200 circle cut from 7mm ply. Gorilla glue…
The story behind this is that I had sanded down a few 25 mm fans to use them in my build but I wasn't satisfied with the result. Since I have bought a 3D printer I felt like tinkering with these and this is the result. It uses 2 magnetic…
Paint rack designed to hold Vallejo Paints (25mm diameter) at a 45 degree angle. Designed to hold them in a very specific paint box I have. Also has a slot in the back to hold over flow.
This is my submission for the Fan Showdown on Major Hardware's channel. Supports touching buildplate only. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .2 or less Infill: 5 Filament: any PLA any…
Made this keyring magnet holder for sticking my nano torch to work places
These are two versions of a side bracket, made to secure side panels with three 3mm countersunk screws per bracket. The depth of the screw shaft (including countersunk screw head) on a longer side is 8mm in total and on a short side the…
I was looking for a clean way to integrate a lid-mounted fan, and in the two remixed parts saw an opportunity to combine them into what I was looking for.
A spacer for Noctua NF-A12x25 G2 and NF-A14x25 G2 fans designed to reduce the noise when mounted on meshes and grids. In those cases, additonal noise is created by the fan blades passing close to the grid or mesh. This especially affects…
Angepasstes Model für einen Münzkoffer im S-Format. Beispielsweise der Cargo S6 (Google hilft bei der Suche). Hier haben alle Münzen der Lunar 3 Serie in folgenden Stückelungen mit den mitgelieferten Münzkapseln der Perth Mint Platz:…
This is a front lens cap for the objective lens on the Fujinon Techno Stabi 12x28 Image Stabilized binoculars These binos do not have objective lens caps as part of the original purchase. I've tweaked the model so they are a more precise…
An air deflector to help direct air upwards in my sff case and away from my psu intake, on a dual fan NH-D12L set up it mounts to the second a12x25r which has 83x93mm hole spacing, pretty niche use case where the CPU cooler air direction…
Einschlagkappe für Pflanzstäbe 12x2mm Schützt das obere Ende der Stäbe vor Deformation beim Einschlagen
Schlauchanschluss 12x25 zum einkleben.
Schlauchanschluss 12x20 zum einkleben.
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
Einfacher Ständer für externe USB Festplatten. Unten am Boden kann man kleine Plättchen aus Gummi oder Filz anbringen. Für eine maximale Festplattengröße von 110 mm Länge und 22mm Dicke. Versionen, für 4, 5 oder 6 Festplatten. Gedruckt…
Ball in circle gap 0,5mm Gap between Balls 0,3x12=3.6mm i think nice idea, need 2h and create4h .step for better resolution need precision print enjoy
I needed a low profile mount to make a 4s3p pack for a project, just a simple holder with no fuss. Can be scaled appropriately to fit 18650s too.
A simple replacement end cap for curtain tracks with a 12 × 22 mm profile. Designed to close off the track neatly.
Use m3 screws mount up enough Wagos to bring single phase mains power into a project box. The three way connector covers connecting the chassis to ground. The mount holes are 27.5mm apart (compatible with the V connector mount holes)…
