P
PrintablesMikhail Shulman
Smallrig cheese plate 1681
Minimum settings for fastest print !Very fragile! 0.3 layer height 2 walls 2 top&bottom layers 10%infill (i used Cross Hatch)
- Pobrania
- 977
- Polubienia
- 78
- Ocena
- 5
Wyniki wyszukiwania: 168
Liczymy pasujące modele…
P
PrintablesBuildX
#0168 Paracord Winder + Tensioner
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** The cool paracord tensioner that @SD-3D created…
- Pobrania
- 919
- Polubienia
- 324
- Ocena
- 4,9
P
PrintablesRed-Fathom
HPe Server 2.5 Caddy 651687 gen8 gen9 gen10 Proliant
designed these to fit in the drive drawers for my HPe Blade center. not perfect but they work. they fit a wide variety of HP servers gen8-10. tried to make a version that was easy to remove, but kept the older model in case they really…
- Pobrania
- 554
- Polubienia
- 35
- Ocena
- 5
P
Printablesthall72
Lego Compatible (41682.dat) Bracket 2 x 2 - 1 x 2 Up Centred
This model is compatible with the lego system.
- Pobrania
- 448
- Polubienia
- 22
- Ocena
- 0
P
PrintablesJC
BMW E53 Rear Window Regulator Clip (51357011680)
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
- Pobrania
- 446
- Polubienia
- 19
- Ocena
- 5
P
PrintablesMNA24
RC Car Wall Mount Compatible with FTX Tracer (Also HBX 16889)
Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…
- Pobrania
- 394
- Polubienia
- 45
- Ocena
- 4,67
P
PrintablesMuxoid
VW Beetle BAJA BUG - 1/16 RC (HBX 16889) Adapter
You can find the BAHA BUG body here . You do not need to scale it up the 1/18 scale fits as in the pictures. I used 10lb velcro and you need to use it sparingly as it is quite strong. Body: Here Buy me a coffee:…
- Pobrania
- 350
- Polubienia
- 90
- Ocena
- 5
P
PrintablesAhmed Alsalawi
190E W201 Center console zebrano wood panel plastic buttons support 2016800275,2016802675,20168008,2016800175,2016802475, 2016802475
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
- Pobrania
- 308
- Polubienia
- 16
- Ocena
- 0
P
PrintablesDijonn
BT-168 Battery Tester Gridfinity Holder
This is a 3x1 Gridfinity holder for the BT-168 Battery Tester.
- Pobrania
- 295
- Polubienia
- 26
- Ocena
- 4,8
P
Printablesthall72
Lego Compatible (27168.dat) Cockpit 4 x 2 x 3 with Pinhole, Ball Joints and Clips
This model is compatible with the lego system.
- Pobrania
- 274
- Polubienia
- 33
- Ocena
- 0
P
PrintablesTrob
Guide Bars for table saw miter slot - 168 mm
Thanks to Bwolfey for creating this thing. It works great, but for the purposes of my project, it was a little too long. So I modified it slightly to make this version with the nuts which is about 168 mm. I also modified the nut holes to…
- Pobrania
- 234
- Polubienia
- 54
- Ocena
- 0
P
Printablesthall72
Lego Compatible (41680.dat) Technic Pin with Friction with Click Rotation Ring
This model is compatible with the lego system.
- Pobrania
- 208
- Polubienia
- 33
- Ocena
- 5
P
PrintablesGrant@GranitWorks
Velobuild VB-R-168 Specialized Tarmac SL7 Headset Cover
I printed this part on the Bambulabs P1S using 100% infill, supports and in PETG.
- Pobrania
- 208
- Polubienia
- 15
- Ocena
- 0
P
Printablessdkk
SHARPAL 168H 8" x 3" Sharpening Stone Holder Base
Stone holder, lid and magnetic pocket for the angle guide to be neatly stored. Allows the stone to be used at a nice height. I recommend sticking some rubber dot feet the the underside for grip. or piece of an old bicycle innertube also…
- Pobrania
- 189
- Polubienia
- 25
- Ocena
- 5
P
PrintablesThx And Bye
Replacement for Mercedes A2016830035 ATTACHMENT ANGLE BRACKET
An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…
- Pobrania
- 177
- Polubienia
- 15
- Ocena
- 0
P
PrintablesDuske Technologies
Rackmount Brackets for Allen & Heath DX168
These are rackmount brackets for the Allen & Heath DX168 stagebox.
- Pobrania
- 175
- Polubienia
- 15
- Ocena
- 2
P
PrintablesSplashdown
X27.168 Stepper Motor
Not really for printing. Provided to assist the design of items/enclosures that use X27 steppers. I have also provided the Fusion 360 .f3z in case you want to see the the internals moving. Category: Electronics
- Pobrania
- 133
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMrWhite
Associated - B6 - Front Bumper 91685
Front Bumper for some RC-Cars from Associated. Print with Support
- Pobrania
- 132
- Polubienia
- 4
- Ocena
- 0
P
Printablesdanielkrah
Rundgewinde DIN 168 Flaschendeckel mit GL 40 Gewinde
Ersatzdeckel für Flaschen mit GL40 Gewinde. Es gibt Deckel mit integriertem Flachband. Um einen geschlossenen Deckel zu drucken, einfach den Deckel mit einer flachen Scheibe in PrusaSlicer verschliesen. (Siehe Fotos)
- Pobrania
- 130
- Polubienia
- 13
- Ocena
- 0
P
Printablesavolkov
Replacement NVME holder plug for MAIWO K1689
I bought MAIWO K1689 M.2 NVME/SSD Neclosure to USB-C to be able to connect a NVME board via USB interface. Then I promptly lost a silicone plug it came with it. This is the replacement. This plug will also fit any mount hole that is 4.5mm…
- Pobrania
- 128
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPTZ-M
Peugeot-Citroen Mousse d Etancheite Collect Rh 9676168780
Hood seal / Windscreen support. The insert needs to be adjusted with a knife!
- Pobrania
- 119
- Polubienia
- 16
- Ocena
- 0
P
PrintablesDer Carsten
Anytone AT-D168 UV Desktop Stand
This radio holder is a perfect fit for the Anytone AT-D168 UV, providing a secure and convenient way to keep your radio on the table. I printed this holder using PLA with a 0.2mm layer height. However, for optimal performance and…
- Pobrania
- 109
- Polubienia
- 5
- Ocena
- 5
P
PrintablesHarrie
HBX 16889 (Pro) battery tray (SG 1601 - SG 1602)
Update 20-02-2022 - now a variant with a stronger foot, as the first design was a little fragile Designed this battery tray, which replaces the existing servo mount. This allows for bigger Lipos to be installed, above the servo. (This…
- Pobrania
- 106
- Polubienia
- 7
- Ocena
- 0
P
Printablesthall72
Lego Compatible (1686.dat) Constraction Shell 2 x 4 x 3.333 Shoulder Pad with Bar
This model is compatible with the lego system.
- Pobrania
- 103
- Polubienia
- 20
- Ocena
- 0
P
PrintablesStefan
Box für Sägeblätter mit 20mm Bohrung und 140-168mm Durchmesser
Box mit Haltern für Sägeblätter mit 20mm Bohrung und 140-168mm Durchmesser. Für die Box werden noch 4 Inbusschrauben M3x20mm und 4 Muttern M3 benötigt. Es kann alles mit PLA gedruckt werden, den Schnappverschluss habe ich allerdings mit…
- Pobrania
- 102
- Polubienia
- 8
- Ocena
- 0
P
PrintablesGoodwind
VW Golf Mk3 roof motor pump impeller (type: 1991-1998, code: 1E0871687)
Pokus vytvořit náhradní díl změřením a namodelováním tisknutelné alternativy. Nejspíš bude nutno ještě lehce upravit
- Pobrania
- 94
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPhilipp
Metabo 1688 Absaugadapter
Adapter für das Anschließen von eines 35mm Schlauchs und eines HT-Rohrs. Braucht nicht unbedingt Supports, sieht dann aber nicht so gut aus. :D
- Pobrania
- 94
- Polubienia
- 8
- Ocena
- 0
P
PrintablesGordonShumway
3D printed Containership (Sietas Typ 168 Natahlie Ehler)
Mehr Informationen hier: https://web.archive.org/web/20220319090655/https://makeprojects.com/de/project/modellschiff-aus-dem-3d-drucker Sietas Typ 168 Natahlie Ehler Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
- Pobrania
- 93
- Polubienia
- 6
- Ocena
- 0
P
Printablesaottesen
IKEA Skadis BT-168 Pro Battery tester
Recommend to print with a raft
- Pobrania
- 79
- Polubienia
- 13
- Ocena
- 5
P
PrintablesStefan
Saw blade holder 140-168x20/170-198x20/170-198x30
You can print the large holders on a MK3S+ without skirt and brim.
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDenci Freeri
168mmL x 136mmW x 69mmH large box with slide lid
Customized version of https://www.thingiverse.com/thing:2594893 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2594893 Instructions Using the following options: comp_size_deep = 69 comp_size_x = 136…
- Pobrania
- 72
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLeonardo3Printi
Cookie Cutter Mercedes-Benz A-class A140 (W 168)
This is a cookie cutter for a Mercedes A140 with 60 kW (82 hp). The short wheelbase makes it very agile so they turn around way faster than other cookies and fit it almost every parking lot. Print Settings Supports: No Resolution: 0.1…
- Pobrania
- 61
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJeffrey Westenberg
Sharpal 168H base
Base for the Sharpal 168H diamond stone. Printed in PLA and works great. Might add a lid and magnets later. -----UPDATE-------- V2 uploaded with longer slit to take out the angle guide and features to place round anti slip pads on the…
- Pobrania
- 60
- Polubienia
- 3
- Ocena
- 5
P
Printablesshane
Shock foot for Eachine EC30 / HBX 16889
The original part has broken twice for me now over two different cars. The only part to fail other than the wing, but the PETG replacement holds up well. Replace the original by unscrewing it, this is easier if you remove the two screws…
- Pobrania
- 60
- Polubienia
- 12
- Ocena
- 0
P
PrintablesPTZ-M
Peugeot-Citroen Mousse d Etancheite Collect Lh 9676168880
Hood seal / Windscreen support. The insert needs to be adjusted with a knife!
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 0
P
Printablesn00by
Makita DUM 168 wall mount
Wall mount for makita grass trimmer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes Supports: Doesn't Matter Resolution: 0.4 Infill: 20% Filament: prusament petg Category: Tool Holders & Boxes
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 5
P
Printablesmetasyntactic
Custom Gridfinity Box for BT-168 Battery Tester
Link to Battery Tester: https://www.amazon.com/VTECHOLOGY-Universal-BT-168-Electrical-Equipment/dp/B07KJLBN2H Used the BOSL2 Library as well as Gridfinity-Refined-OpenSCAD for the design
- Pobrania
- 55
- Polubienia
- 7
- Ocena
- 5
P
PrintablesKarel
Lego 42168 - John Deere 9700 Forage Harvester - kostičky
Bližší informace o modelu na stránkách Lega nebo v aplikaci LEGO Builder. Zkompletováno z různých zdrojů na internetu, popřípadě navrženo ve FreeCadu.
- Pobrania
- 55
- Polubienia
- 13
- Ocena
- 0
P
Printableschrbau
2A XL Battery adapter for HBX 16889 RC Car
This is a Battery adapter for HBX 16889 RC Car for batteries up to 2A (35x72mm). Printed in PLA (other material might be better suited), 0.3 layer, 15% infill. Remove the Velcro strap from the car, attach the adapter with cable binders…
- Pobrania
- 53
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMcKeeTech
Allen & Heath AB168/DX168/DT168 Rack Mount
I've been holding off on posting this for months because I keep forgetting to take pictures, but at this point I'm just going to post and hopefully come back later with pictures. These are rack ears for an Allen & Heath AB/DX/DT168…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesChrisGilletti
Dust Cover for Blackzon Slyder, HBX 16889, Reely RaVage and similar
I designed a cover so that I don't have to remove small stones and dust from my RC car every time. This should help the electronics and mechanics last longer. This cover fits to Blackzon Slyder and should also fit all cars built on the…
- Pobrania
- 51
- Polubienia
- 10
- Ocena
- 4
P
PrintablesStefan
Box für Sägeblätter mit 16mm Bohrung und 130-168mm Durchmesser
Box mit Haltern für Sägeblätter mit 16mm Bohrung und 130-168mm Durchmesser. Für die Box werden noch 4 Inbusschrauben M3x20mm und 4 Muttern M3 benötigt. Es kann alles mit PLA gedruckt werden, den Schnappverschluss habe ich allerdings mit…
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 0
P
Printables__get_name
Eurorack Case - 168HP 10U - Designed for Jaspers Stands
This case is designed to be used with a Jaspers synth stand, as such it is angled at 30º so that it can sit vertically when mounted. There are holes in each 3U row for a Topobrillo Eurobus power supply, and 3 different style of covers for…
- Pobrania
- 46
- Polubienia
- 9
- Ocena
- 0
P
Printablesgabar5
16850 li-ion cell 10x5 holder stand
18650 10x5 holder. Simply large holder to 18650 cell li-ion
- Pobrania
- 43
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKaoz3000
Front bumper for HBX 16889, Part Number M16004
Simple replacement for the front bumper part. You can use the Fusion 360 file to increase the wall thickness Haiboxing and similar Manufactors should work.
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichal Poláček
Střešní nosič pro model Range Rover MN 168 v měřítku 1/12
Nožičky a samotná zahrádka se tisknou zvlášť. Nejdříve jsem nožičky usadil do otvorů ve střeše, potom nanesl malé množství vteřinového lepidla a zahrádku usadil.
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSam
Makita LXT 18V Battery Adapter for Meister Craft MAS168
This adapter gives my old cordless screwdriver a new live ;-). The 16.8V battery pack was broken and I did not want to invest in NiMH adapter anymore. But as I use Makita LXT 18V system, I bought a cheap adapter at…
- Pobrania
- 35
- Polubienia
- 10
- Ocena
- 0
P
Printablesaott33
Wera 160/162/168i Screwdriver - Triton Pegboard Holder
Inspired by the following: https://www.printables.com/model/106585-wera-wrenches-395-ho7-sm-wall-mount-ikea-skadis-pe https://www.printables.com/model/139416-wera-scredriver-holder-for-workshop
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPhilipp
Metabo 1688 Nutschiene Parallelanschlag
Ersetzt Teile 142 und 147 aus der Explosionszeichnung der Metabo 1688. Benötigt 2x M6x60 und die dazugehörigen Sicherungsmuttern.
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 0
P
Printablesrauchbar_shop
Asus Monitor Wandhalter MB 168 / Wall holder
in tinkercad schnell für Asus MB 168 Monitorhalter designed ;) hält auch mit drei halter, wie auf dem foto.
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
Printablesshane
Shock cap for Eachine EC30 / HBX 16889
Print on its side for strength, supports will be needed. Go for a shock-resistant filament like PETG and up the wall count. Made for Eachine EC30 but to the best of my knowledge, it will also fit HBX 16889 shocks. Matching shock foot can…
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBoby
Atmel ATMega MCU Flash Adapter for ATMega168/ATMega328
Update 1st April 2020: New design using two parts for easier assembly This adapter allows you to flash a ATMega MCU chip based on the TQFP-32 case (like ATMega168 or ATMega328) directly while being soldered to the board. The necessary…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJohannes G.
Knobs for Metabo TK 1685 / 1688
Replacement knobs for the Metabo TK 1685 and TK1688 table saws. The knobs are close to the originals in size and looks. They take m6 bolts or nuts. They probably also fit other Metabo tools from the same era. There are three options. A…
- Pobrania
- 31
- Polubienia
- 6
- Ocena
- 0
P
Printableszhaffrano
Smallrig 1681 with fillet
Based on Smallrig cheese plate 1681 by Mikhail Shulman Fixed minor geometry at one corner that i feel somewhat asymmetrical 1mm fillet on the sides
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
Printablestew-werkstatt-bvw
Pro K_Klotz Platte 216mm *168mm *24mm mit 16mm Bohrungen allseitige Präzision
Mit diesen Platten können Sie Maschinen und Vorrichtungen beinahe in Werkzeugmaschinengüte herstellen. Beim Aufreiben der 16mm H7 Passbohrung empfehle ich eine Wendelgenutete Maschinenreibahle. Erst feinfühlich vorsichtig links drehend…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 5
P
PrintablesRowan Pulman
HP Pavilion 250 G6 (3168N6W) Laptop: Desktop Conversion
Part Size (L*W) Infill Supports Lid 214mm*193mm >20% Yes Body/Base 208mm*186mm >20% No Pwr Button 14.5mm Dia >30% Yes Additional assembly parts: HP 250 G6 laptop motherboard w/ heatsink, RAM installed M.2 2280 SSD HP wireless card w/…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMurdogk
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
- Pobrania
- 28
- Polubienia
- 7
- Ocena
- 0
P
Printablesctheroux
Dual 16850 Battery Holder Mounting Plate
This is a mounting plate for a Dual 16850 Battery Holder. It allows screwing the battery holder to a surface without having to put the screws inside the battery holder. It prevents damage to the battery that could be made by using inner…
- Pobrania
- 28
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNebw
Casio A168 Uhrenhalterung
Uhrenhalterung für die Casio A168 mit kleiner Schale für Ringe oder Ohrstecker
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBurák
manual gearbox ball socket for mercedes A-class w168 OEM:A0009930161
"Manual gearbox ball socket OEM:A0009930161" Model of a plastic part from 1996-2004 Mercedes-Benz A-class w168. It holds a weight that helps shifting feel smoother. Mine failed and fell completly out, so the shifting felt hard and…
- Pobrania
- 27
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGateIron, LLC
Flywheel, 168mm for goBilda hubs (16mm Square x M4 mounts, 6mm D-shaft, 8mm or 12mm Hex Shaft Fly Wheel)
REVISED: goBilda hubs fit properly now without modification. Please re-download and delete earlier copies. A compact set of flywheels made with Robotics in mind, but useful wherever the storage of rotational momentum is needed. Either of…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPhilipp
Metabo 1688 Rohre Schiebeschlitten Kappen
Der Vorbesitzer der Säge hat die Stangen des Schlittens gekürzt und dabei auch die Stopper abgesägt. Ich weiß also nicht, ob die Kappen auch passen, wenn diese noch vorhanden sind. Mache gerne einen Remix mit Aussparungen, falls…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMaxResStudios
BT-168 Battery Tester Gridfinity with Magnet Holes
This is a 3x1 Gridfinity holder for the BT-168 Battery Tester remixed to include easy-print magnet holes as the original design didnt have them.
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 5
P
PrintablesPhilipp
Metabo 1688 Befestigung Schiebeschlitten
Da Metabo keine Ersatzteile für die 1688 mehr fertigt, habe ich einige Teile neu gestaltet. Zusammen mit einer M6x30 ersetzt dieses Model Teil 56 und 57 des Schiebeschlittens und sichert ihn gegen unbeabsichtigtes Herausfallen.
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAyu
Jadens JD-168BT (Beeprt BY-245BT) thermal printer power brick under table / desk mount dock
This mounts with two double sided tape strips under a desk. Then the power supply brick for the printer can slide into it and clip into place. It can easily be removed if you want to move the thermal printer. Print this with tree supports…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printablesmac310
x27-168 stepper spacer
3mm spacer/washer for x27-168 stepper motor.
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPLAfiller
Torch 16850 battery insert
Many flashlights come with a plastic casing for 3xAAA batteries, but they are also compatible with a single 16850 battery. This is an insert that holds the battery inside. Print without supports. 100% infill I used PLA+ @ 35mm/sec speed,…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichael Brennan
HBX 16890a (16890sa) Rear Wing
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJohannes G.
Zero clearance block for Metabo TK 1685/1688 table saw
This model is a zero clearance block for the fence of the sliding table of the Metabo TK1685/88 table saw. It aims to reduce tearout on crosscuts as it supports the material at the end of the cut. Below an example of a cut in spruce first…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
Printablesaiye
Begode Blitz Pro 168 volt EUC Screen Guard
If you still have your Blitz Pro screen in the upper handle position, but feel like it needs a little protection in case of falls, this is a simple screen guard for you. It uses all stock hardware to install over the screen, and is…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGiovanni1954
ARTE&DISIGN GT168
ARTE&DISIGN GT168 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
- Pobrania
- 13
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTobbY Nowack
Krups Schlüssel für Milchsystem MS-8080016886
Schlüssel um die Düse im Milchsystem ein bzw. auszubauen. Druckdaten für FDM und SLA. Beispiele wurde mit FDM (Prusa MK3) und SLA (Anycubic) gedruckt. Einstellungen FDM: 0.4 er Düse 0.2 mm (0.15 mm) Schichthöhe Infill 50% Druckrichtung…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAltblechkutscher
Beer Crate for BT-168 battery tester
Modified Beer Crate in order to fit the BT-168 battery testers for this popular design here:
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChrisGilletti
stand for 1/16 RC car, HBX 16889 and similar
This is a simple stand designed to prevent the wheels from becoming flat over time. It should fit all RC cars that use the same platform as the HBX 16889. The model can be printed without any supports in 0,2 or 0,25 layer height.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJono
Rugged box for UNO No Mercy, Skip-Bo 168 cards
This is a remix of Rugged box for UNO game cards which has had 20mm added to the centre. This now fits the larger 168 card decks. The uno logo is stretched - but pick your battles.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChrisGilletti
Dust Cover for HBX 16890
Similar to my other model, I created a dust cover for the HBX 16890 to protect it from coarse dirt. Since I don’t know how the motor’s heat dissipation will perform over time, this may not be the final version. You will need an M4x16 or…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAnton
Fat Shark Battery Mod NCR16850
Moded main housing to reuse voltage meter from original fat shark batteries. Covered the volt meter PCB with Super Corona Dope to protect it against ESD and damage. Exposed PCB looks better. Category: R/C Vehicles
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printablesmy
SHARPAL 168H Diamond Sharpening Stone Holder
I created this holder to fix my SHARPAL Diamond stone on a wooden based, this allows me to have multiple sharpening stones aligned on the same base. This holder has two 3mm diameter holes 100mm a part to hold it in place. I printed it for…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesXzander79
Narva 81168WBL Mount Plate
This model was designed to act as a mounting plate that can be glued to mounting surface so that the Narva 81168WBL can be screwed to it. Note that the plate when printing it is required to be paused to insert the nuts that will be…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesstefanmader1984
playmobil 7116800 2 - 6551544
playmobil 7116800 2 - 6551544
- Pobrania
- 7
- Polubienia
- 5
- Ocena
- 5
P
PrintablesHonza Růžička
Box for HomeAssisant sensor SHT-21_Light_Sensor_168
Více informací: HomeAssistant/SHT-21_Light_Sensor_168 at main · HonzaRuzicka/HomeAssistant (github.com)
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesmaniok
Sangtai 6168s clockwork wall mount
A simple wall-mount solution for the Sangtai 6168S clock mechanism. The original movement has no convenient mounting option and requires removal from the wall for battery replacement. This holder attaches with double-sided mounting tape…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRealnuf
stand for mp516803av
This is a portable stand to hold an air water/oil separator. Specifically designed to hold my model mp516803av regulator while air brushing. Having used supports for the 35mm opening filing was necessary to provide clearance for my…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKlassicCole
Anytone D168UV Radio Charger – Gridfinity Holder
This Gridfinity holder is designed to securely store an Anytone D168UV radio charger. The bottom includes spaces for 6 mm × 2 mm magnets, which can be glued in place to make the holder magnetic and compatible with magnetic Gridfinity…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDarek
Flek do obcasa 1176 - 1168 TPU 100% wypełnienie
Końcówka obcasa FLEK
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesThan
GL40 Shaker Cap / Salt Shaker Lid (DIN 168)
This is a custom GL40 (DIN 168) shaker lid designed for easy upcycling, allowing you to turn standard apothecary bottles, medicine jars, syrup glass bottles, or juice containers into a practical salt and spice shaker. It is designed to…
- Pobrania
- 0
- Polubienia
- 2
- Ocena
- 0
P
Printables
Custom Gridfinity Box for BT-168 Battery Tester
Link to Battery Tester: https://www.amazon.com/VTECHOLOGY-Universal-BT-168-Electrical-Equipment/dp/B07KJLBN2H Used the BOSL2 Library as well as Gridfinity-Refined-OpenSCAD for the design
P
Printables
Narva 81168WBL Mount Plate
This model was designed to act as a mounting plate that can be glued to mounting surface so that the Narva 81168WBL can be screwed to it. Note that the plate when printing it is required to be paused to insert the nuts that will be…
P
Printables
Knobs for Metabo TK 1685 / 1688
Replacement knobs for the Metabo TK 1685 and TK1688 table saws. The knobs are close to the originals in size and looks. They take m6 bolts or nuts. They probably also fit other Metabo tools from the same era. There are three options. A…
P
Printables
SHARPAL 168H Diamond Sharpening Stone Holder
I created this holder to fix my SHARPAL Diamond stone on a wooden based, this allows me to have multiple sharpening stones aligned on the same base. This holder has two 3mm diameter holes 100mm a part to hold it in place. I printed it for…
P
Printables
Allen & Heath AB168/DX168/DT168 Rack Mount
I've been holding off on posting this for months because I keep forgetting to take pictures, but at this point I'm just going to post and hopefully come back later with pictures. These are rack ears for an Allen & Heath AB/DX/DT168…
P
Printables
Bicycle Rear shock replacement, hard, 168x..., 185x
I needed a replacement rear shock because it started leaking and while I was waiting for the service kit I made myself this hard shock absorber. It needs to be printed with more infill and thick walls to be strong. I printed with PETG. It…
P
Printables
stand for mp516803av
This is a portable stand to hold an air water/oil separator. Specifically designed to hold my model mp516803av regulator while air brushing. Having used supports for the 35mm opening filing was necessary to provide clearance for my…
P
Printables
HBX 16890a (16890sa) Rear Wing
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
P
Printables
BT-168 Battery Tester Gridfinity Holder
This is a 3x1 Gridfinity holder for the BT-168 Battery Tester.
P
Printables
Metabo 1688 Absaugadapter
Adapter für das Anschließen von eines 35mm Schlauchs und eines HT-Rohrs. Braucht nicht unbedingt Supports, sieht dann aber nicht so gut aus. :D
P
Printables
HBX 16890 Battery Tray
Prints in two pieces. The lower piece can be held in with a zip tie, and has room to use the original velcro strap to connect the battery. Designed for a 75mmx34mm battery (2200mAh 2S), but can hold up to 88mm and maybe more with some…
P
PrintablesStawiamKlocki.pl
Display Stand for LEGO Star War Jedi Interceptor Ahsoka's 75401 / Anakin's 9494 75281 75038 / Obi-Wan's 75135 / Yoda's 75168 75360
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
- Polubienia
- 99
- Ocena
- 5
P
Printables
Lego Compatible (93168.dat) Cylinder 3 x 6 x 2.667 Horizontal with Solid Studs
This model is compatible with the lego system.
P
Printables
Divider 168mm x 440mm (6 sections)
I designed a divider for my kitchen drawer (168mm x 440mm). If you have any suggestions just tell me or change it yourself, in the attached Fusion file.