76 modeli
Remove the wheels as in the pictures (see picture 4 & 5) Space shuttle : Fixed with wall plug (see picture 8) and Double-Sided Tape for nose gear (see picture 6) Slide the front part (red axle) into the “shuttle hook nose gear” (see…
This model is compatible with the lego system.
I have just quickly added screw holes. I don't trust tape.
This model is compatible with the lego system.
This model is compatible with the lego system.
****************** Long Shaft Servo Discontinued ****************** The long shaft servo was discontinued :(. I removed the alpha 0.1 printable mount for the short shaft motor as it didn't work. I'm working on a new mount that shifts the…
The latch for my screwdriver kept falling out, so now I can print one anytime it pops out and gets lost.
This model is compatible with the lego system.
Need to model this for a work project, may be useful for someone else at some point. ETA: Box_printable will work better for printing Category: Electronics
This model is compatible with the lego system.
lego 2877 71752 98283 15533 30136 30137 20310 2412
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
If you have one of those common double sponge filters for your fish tank, chances are you have had the suction cups fail. Print this instead. Use PETG and 100% infill so it wont float. you are free to use the files however you wish - I…
Dust port cover for Milwaukee 2833-20 Circular Saw
This model is compatible with the lego system.
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A tilted stand for the Lego Space shuttle set. Uses the same holes as the original stand, so no changes needed. Printed with Esun PLA + , 3 walls 15% Gyroid. Supports needed.
Since the rear wheels will come off, I used two Technic Lifarms, thin 1x5, with Axle holes https://www.bricklink.com/v2/catalog/catalogitem.page?P=11478#T=C) and fixed them with two technic pins in the rear wheel bays. You can use the…
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
Mount for Kavan Brushless Motor PRO 2836-850 https://www.kavanrc.com/cs/item/kavan-brushless-motor-pro-2836-850-140396
This is a remix for the flywheel powered car #3566283. So far thing-i-verse has not let me add the remix info in the right place. https://www.thingiverse.com/thing:3566283 Demo and build video on youtube. https://youtu.be/hgVMQ4UHOGA So I…
🔧 About the Model 🖨 Designed specifically for the Core One printer — no extra tuning needed 🧱 Studs are slightly oversized for a better grip 🛠 SolidWorks source file included for easy customization 💡 Tip: When printing with a 0.4 mm…
3D Printed enclosure for RTL2832U + R820T USB SDR if you have lost original one or want to shield it better. Power LED is visible through top hole. Easy to print and assemble. 8 x M3 bolts are required.
US Navy Cryogenics rating for wall art. This is a remix from - https://www.thingiverse.com/thing:3764192 - which I made the model thinner and added the text for the MM Cryogenics NEC 4283. All remix was done in Tinkercad.
Tri-Bahtinov Mask. 283mm outer diameter & 90mm inner diameter. Used this tool to generate the drawing and then Fusion 360 to make the stl. https://satakagi.github.io/tribahtinovWebApps/Tri-Bahtinov_symmetric.htmlWhole mask or Cut in 2…
This is a replica of the Heritage miniature set #1283, "Fire Elemental", from 1981 ( See http://www.dndlead.com/Dungeon-Dwellers/1200s/1283.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 Print Settings Printer Brand:…
Remix version of Los Angeles Lakers logo (multi color) by jim_2835. In this version, the logo will be printed smooth and can therefore be used on a satin or textured plate. Compatible with MMU3 on Mk4
My right fridge door was opening when the left door closed so I designed this part to replace the existing door closer to be stronger. This replaces the original part (MJB62830601) and uses the existing screw. Compatible with model #:…
Deutsche Verkehrsschilder 283, 283-10, 283-11, 283-20, 283-21, 283-30, 283-31 „Absolutes Haltverbot“ in Originalgröße von 600 mm. Du benötigst einen mehrfarbfähigen Drucker oder musst unterschiedliche Elementhöhen mit Filamentwechsel…
The model https://www.printables.com/model/109571-lego-space-shuttle-10283-ceiling-mount allows to mount the Lego Space Shuttle in a more stable manner compared to other mounts. Thus the shuttle can be placed on walls or ceilings in…
Replacement Parking Clip for Nilfisk Elite Series (Repl. 128350157) This is a replacement "parking clip" (tube holder) for Nilfisk Elite vacuum cleaners. The original part is known to be fragile and often breaks after prolonged use.…
This replacement part is available from LG Canada for $6.11 (you rock LG, love your stuff), but designing this was a chance to learn to trace photos in FreeCAD. Attaches to the underside of the R/H door with a single Phillips head screw,…
This is a rough model of a 2836 motor. All the screw holes and overall dimensions are accurate but some of the details have been neglected due to laziness.
Replacement of Karcher vacuum cleaner Foam filter cap - 9.012-283.0. For fixing filter cap use original or 3D printed lock cap originally supplied with normal airfilter.…
Case per Sdr-Rtl 2832u Noolec formata da due parti, cover superiore ed inferiore. Per unire le due metà usare 4 viti TCEI M4 da 37mm e relativi dadi che verranno incassati nelle sedi.
This is a replica of the Heritage miniature set #1283, "Water Elemental", from 1981 ( See http://www.dndlead.com/Dungeon-Dwellers/1200s/1283.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 Print Settings Printer Brand:…
This is a replica of the Heritage miniature set #1283, "Air Elemental", from 1981 ( See http://www.dndlead.com/Dungeon-Dwellers/1200s/1283.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 Print Settings Printer Brand:…
A small detailed floodlight at 1:14 scale fitted with an 2835 SMD strip. Other SMD types strips could be used. An original design on Fusion. The floodlight is contained in the mounting bracket with a 2mm screw on one side, or fixed with…
TT interier - bt283 Category: Models
This is a replica of the Heritage miniature #1283, "Earth Elemental", from 1981 ( See http://www.dndlead.com/Dungeon-Dwellers/1200s/1283.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 Print Settings Printer Brand:…
The Vivitar 283 requires a battery holder for AA batteries that's frequently missing. This requires some copper tape to connect the two terminals. You'll have to keep the batteries held together as you slip it into camera. I appreciate…
recreation of Victory Motorcycles clip-on style fork guard (Polaris #5438283). this is as close to a 1:1 recreation as I could get and should clip on no problem I've seen $150 on an OEM pair. Of course these won't be of the same quality…
Our Whirlpool front load washer had a drum baffle (Whirlpool Part Number WPW10283356) fall off during the course of normal laundry. This model is not an identical replacement, but has worked rather well as a replacement in our washer. I…
I liked the mount system from @3DprintSOS but as my printer is located in my basement I had to add some lights to it, otherwise the camera was kind of useless. I had a spare 10cm piece of SMD2835 LEDs so I created two mounts, one where…
Ich habe eine Möglichkeit gesucht, einen Ausleger für eine Dahua HDBW2831E-S-S2 Überwachungskamera an einem 140mm Holzbalken zu befestigen ohne Löcher oder Schrauben im Balken zu benötigen. Außerdem hab ich noch ausreichend Platz für…
Large Drink Coaster I designed in honor of FRC Team 2834, The Bionic Black Hawks. https://team2834.com/ Two sizes: 106mm and 111mm
I got tired of the stylus or the thumb drive falling on the floor when I was using the printer, so I designed this holder to attach behind the touchscreen so that they would be secure but accessible. I used FreeCAD, so that file is…
A small detailed floodlight at 1:14 scale fitted with an 2835 SMD strip. Other SMD types strips could be used. An original design on Fusion. The floodlight is contained in the mounting bracket with a 2mm screw on one side, or fixed with…
Remix of Bigmac76`s Skymule motor mounts with an extended shaft of 27mm to enable a 2830 motor to fit flush with the outer edge. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Supports: Yes Resolution: 0.2 Infill:…
This part is a direct copy of the original power cable strain relief of older Quickmill espresso machines. I made it based on a 02835, but it will most likely fit other models too. Category: Kitchen & Dining
test carenado trainer top flite sierra para motor 2836
This fidget spinner is engineered to give the greatest moment of inertia possible. Read the "How I Designed This" section for more information. My own build uses steel weights to weigh in at 10oz (283g) but if you have the money for…
This is to replace a Snapper mower speed lever anchor part number 7032830YP. The biggest functional difference between the actual part and this part is that the mounting hole is circular instead of square. My mower didn't have the square…
This part is more of a temporary solution for myself and is meant more as an inspiration for an improved design. Installation is as follows: install manometer with the fixed capillary tube inside the machine route the capillary tube to…
Nose cone for a rocket with a body tube having the interior diameter of roughly 32.6 mm (1.283 inches), about what a BT-55 is which is the closest standard Estes size to a 34 mm inner diameter. One piece, printed with a 1 mm wall…
Washing Machine Anti-Vibration Foot Damper This TPU anti-vibration foot damper was designed for the INDESIT OMTWE 81283 WK EU washing machine. It fits the original hexagonal adjustable feet with a rubber base and helps reduce vibration,…
This adapter holds both, a normal and bottomless portafilter in Quickmill machines with integrated mills. It is compatible with the standard metal holder, to be placed on top. Secure it in place with just some double-sided tape. A small…
As my Philips Cucina HR2931 food processor was skipping gears, and had issues with starting, after disassembly I discovered that a gear wheel was missing some teeth. I hate wasting the whole food processor over it, so this is recreation…
Pixel TW-283 Remote Control Gridfinity Holder
This was a design for our Zanussi ZDT 6252 dishwasher, the door latch/catch part number 4055283925, but the same part is used in many other compatible models, even from other brands. I've seen Electrolux and AEG just to mention two,…
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
This part avoids the degradation of the plastic water tank of a Quickmill machine. The holes in the part have a slight curvature, guiding the tubes towards the center of the water tanks. This avoids the hot water and steam directly…
This is a replacement lever/handle stop designed for the Pfister 974-283 and 974-285 faucet cartridges. The original part tends to wear out or snap, so I modelled a printable version that fits the spline and sits properly in the housing.…
The old version (037906283C) of the valve had a cap. The new version (06H906283B) doesn't have a cap, but it does have a hose with a filter 06H133583F I suggest upgrading the valve cover for the new one. A simple cover will prevent dust…
This is a quick-printing, easy-to-use snap on light cover for the PixelPRO TW-283 wireless camera receiver. (The receiver may say "TW-283RX", but it is the same thing) This can be used for many purposes. In my case, I want to use it for…
Note: AI was used to assist in naming components, cleaning up the timeline, mirroring parts I did by hand, and assisting me learning the Fusion 360 UI. Model: Claude Opus 5 via MCP. Human effort was used with a Dial Calipers measuring the…
3-Bromo-5-chloro-2-methoxypyridine (C6H5BrClNO, CAS 102830-75-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Whatever the filament colour, each atom reads clearly thanks to its engraved symbol. Most…
****************** Long Shaft Servo Discontinued ****************** The long shaft servo was discontinued :(. I removed the alpha 0.1 printable mount for the short shaft motor as it didn't work. I'm working on a new mount that shifts the…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
This model is compatible with the lego system.
This was a design for our Zanussi ZDT 6252 dishwasher, the door latch/catch part number 4055283925, but the same part is used in many other compatible models, even from other brands. I've seen Electrolux and AEG just to mention two,…
The old version (037906283C) of the valve had a cap. The new version (06H906283B) doesn't have a cap, but it does have a hose with a filter 06H133583F I suggest upgrading the valve cover for the new one. A simple cover will prevent dust…
This is a quick-printing, easy-to-use snap on light cover for the PixelPRO TW-283 wireless camera receiver. (The receiver may say "TW-283RX", but it is the same thing) This can be used for many purposes. In my case, I want to use it for…
A lid for ÖNSKLIG. The fit is not perfect. Printer failed mid print and had to print some parts and glue them. Category: Containers
ORGANIZZATORE GT283 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
