Liczymy pasujące modele…
This is a DJI Mavic inspired drone powered by a Pixhawk 4 flight controller. I have attached a parts list for my used components. Therefore, if you want to use different components these might not fit into the 3D model. With this setup…
Spool holder attached to the Prusa MKs frame.
Style A large starburst wall clock in the Atomic-Era Mid Century style. In gold it also looks like it would be at home in a Catholic church or Masonic temple! I used a Silk Gold PLA. Copper or Bronze are also appropriate mid-century…
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…
A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…
Thanks to @Kemmotar for the excellent design of the original. I made a few different sizes, and decided to put my Ender Extender kit to work. The result is marvelous. 30% Infill was used here, in Cubic Subdivision arrangement. I only did…
***Warning: I need to redesign 2 and 9 Blade Prop, please print 3 and 5 only in the meantime.*** (2,3,5,9) Blade Design 3 Blade Propellers are tested and perform very good. 5+9 just 4 fun. I Print with: ASA max 50mm/s 256°C/104°C 0.12mm…
CLAMP HOLDER 80x350 CLAMP HOLDER 50x300 https://www.printables.com/cs/model/752981-clamp-holder CLAMP HOLDER 50x300 mm CLAMP HOLDER https://www.printables.com/cs/model/752981-clamp-holder-50x300-mm
Water spouting frog : https://drive.google.com/file/d/1EwWdHxvZjmnDGIcFG_wjHauetFlx5DhG/view?usp=sharing powered by a solar pump. (only at full sunlight) The frog is attached to the swimmingplatform at the edge of the pool. Print…
I really like this model, particularly as I didn't need to purchase anything except the Keybak. I was able to use all stock that any Voron enthusiast likely has sitting around. Printed in eSun ABS at 248/110, 40% infill with the…
Bahtinov Mask for Canon EF 100-400mm on ET-83C
Pour utilisé un rail de 400mm au lieu du 300mm
🛩 FREE sample of the Blanik L-13 2400 mm RC Glider — full kit available here This is a free sample of my full Blanik L-13 2.4 m scale RC glider. Print these parts to test your printer settings, surface finish, and LW-PLA workflow before…
Updates: Aug-10 2017: 2.0 update. Was not happy with uneven clamping. Increased clamping screws to 6, decrease mounting screws to 2. Tweaked front cap to maybe print better in ABS. Aug-9 2017: Added a notch to outside of rings and inside…
Solar filter for the Canon EF 100-400mm F4.5-5.6L IS II USM (Mk 2) lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy…
Solar filter for the Canon RF 100-400mm F5.6-8 IS USM lens. This solar filter fits snugly on the end of the lens with the lens extended. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You…
02-06-2025 UNW-T6 outer barrel options added --- as part of the big V24 update. the 14mmccw barrels have been made a bit stronger - 14mm CWW barrel tips have been added --- this is a 370mm or 400mm (one piece) long barrel replica made for…
linear rail bath for mgn9 mgn12 400mm
This toolholder can hold up to 4 screwdrivers (I got these: Princore Shop ), 1 brush, 2 tweezers and 1 pliers (I got this: Knipex ) and is mounted to the side panel screws. Feel free to remix it for your own tools :)
Some time ago I started thinking how I can properly enclose my V-Core3 400mm printer. The problematic part was that I decided to build a modified version (OpenFront), which is 265mm taller than the original RatRig printer. Therefore, a…
Adapting Canon Lens EF 400mm 1:5.6 L (Ultrasonic) for Astronomy with ZWO EAD EAF holder is compatible for SCT , Newton or Refractro telescope. Fine manual focus available too. OpenSCAD source code on GitHub BOM 1x Canon Lens EF 400mm…
This solar filter body has an ID (inner diameter) of 91mm so it fits snugly over the end of the outer rubber rings of the lens. For reference, 91mm is just over about 3.5 inches in diameter. I printed the pieces separately to eliminate…
Printed with 0.2 layer height 15% infill. Use it on top of the strings by the bridge. Do not stick it under the strings!
MGN12H 400mm for linear rail upgrades and Voron build modelling MGN12H An MGN12H is a compact linear‑motion carriage designed to run on an MGN12 miniature linear rail. It’s part of the Hiwin‑style “MGN” series commonly used in 3D…
Flip up solar film holder for Canon EF 400mm f5.6 90-91mm internal diameter
Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM
Simply a geometric pattern for my Elegoo Phecda. Maybe someone think it is useful for them too. Either you take the complete Layout dxf for the full pattern or you just pick one of the single patterns. Have fun.
Einfacher und stabiler Kabelkanal den ich für mein Smarthome entworfen habe…
Lenscap for my nikon 400mm F2.8 fron Z-mount Need minimum 4 screws, you can use 2 more to fix the spring part, but not necessary
A filter that fits on the lens hood mount of the Sigma 100-400mm lens. The front of the filter is 80mm square (because squares are easier to cut out than circles). The print also includes a cap that can screw into the bottom and a lid…
Printed in PETG on Prusa MK3s with super glue join. With layer and infill modifier. The holes on the side can be used to clamp the filter material. Unfortunately I have not made a picture of the finished product at the next filter change…
I had trouble finding 400mm skirts for my Trident, they existed for a normal Voron, but no luck with the Trident. I cut up/pasted the original STL's and came up with these. You will need a larger format printer than the usual 220m for the…
Astronomy red dot finder holder for refractor 80/400mm Category: DIY
Simple lens cover for Canon EF 400mm f/4 DO IS II USM Lens - I couldn't find one so designed and printed in PETG
Model created for 300x300mm printers. Print with 0.2mm layer. 3 perimeters 10 to 15% filling. My first project.
Print one for every side, one of them mirrored.
printed with 50% infill (Cubic subdivision), screws at 100%. will need glass for the middle (acrylic warps from water). printed on 220mm x 220mm. added V3 (taller so doesn't break. PETG works much better. printed V3 with 15% infill and…
Solar filter for the Canon EF 100-400mm F4.5-5.6L IS USM (Mk I) lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this…
Note that the tolerances are relatively tight so the the filter can fit over the lens but can also be easily removed when required. Snug but not too tight a fit. Part 1 is the mount that goes over the lens hood. The internal hole is sized…
Improved electronics panels for the VC3.1 400mm to enable mounting of additional PSUs (2x Meanwell LRS-200 or 350W equivalent and 1x Meanwell LRS-150 equivalent), dual SSRs (bed + chamber heater), and fixed mounting for a Raspberry Pi and…
I didn't like storing my Z-system lenses vertically, and putting them in individual cases or my ThinkTank photo carryon was inconvenient and took up too much space. SO I carefully measured my lenses and made fitted drawers/trays for them,…
For 400mm bed. Removed the holes shown in my print, they weren't aligned and not needed. Jig fits snug.
Most of the below is just for historical record. This is a deprecated design. See links below. M-bot v.2; https://www.thingiverse.com/thing:3045974 M-bot v.3; https://www.thingiverse.com/thing:3134348 M-bot v.3.5;…
My desk drawer glider broke, so I made a new one. 400MM doesn't fit in my printer, so I split it in 2, with large fitting that can be glued together. It has 5 3mm countersunk holes in locations for my current drawer.
These sealing plates are designed to be bolted around 3.2mm (0.125 inch) metal AWD plates and help cover up a lot of the gaps for better temperature retention in the enclosure. These are sized specifically for a 400mm V-Core 3.1 with…
What this is A modular leg extension / riser system for LaserTree K-series machines designed to add clearance without sacrificing stability . Key features Modular height: each leg uses 3 stackable sections (100mm each) Stable feet: feet…
Had to adapt some feet for this drone : https://www.thingiverse.com/thing:2221073 I wasn't smart enough, the screws kept me from sliding the battery between the 2 layers...had to install the battery below the quad, and didn't like the…
For when you want to mount a guide scope that needs a base that's a little more sturdy. This was designed with the SV106 and its rings in mind, but it should fit anything that has a Synta style dovetail. The dovetail in this model is 90mm…
This is just some test boxes for a 300mm x 400mm printer. I use it on my Peopoly magneto X. It's only 0.2mm high, so one layer. The boxes are handy because you can make adjustments and peel them off to see how thick the print is while it…
For Rage RC, Top Race, Volantex, ETC
i had a ZR250 quad and wanted a hex but couldn't find much, so i decided to try and make a fully printable frame and arms. every thing is to be self threading using M3 X 10mm. so far this is completely work in progress and im still…
this cable cover is linkable to make it as long as you want. I have included files to offset the joints on the bottom pieces to the joints on the top pieces to add rigidity. this prints with no supports. Due to the size of the bases I…
The standard miter gauge that comes with the Metabo TS sliding table (628900000 ) works but is rather limited. There are plenty miter gauges available that do allow accessories like end stops and extensions. Unfortunately the T track used…
i had a ZR250 quad and wanted a hex but couldn't find much, so i decided to try and make a fully printable frame and arms. every thing is to be self threading using M3 X 10mm. so far this is completely work in progress and im still…
MGN12H 400mm for linear rail upgrades and Voron build modelling MGN12H An MGN12H is a compact linear‑motion carriage designed to run on an MGN12 miniature linear rail. It’s part of the Hiwin‑style “MGN” series commonly used in 3D…
🛩 FREE sample of the Blanik L-13 2400 mm RC Glider — full kit available here This is a free sample of my full Blanik L-13 2.4 m scale RC glider. Print these parts to test your printer settings, surface finish, and LW-PLA workflow before…
🛩 Blanik L-13 — 2400 mm Scale RC Glider, fully 3D printable DOWNLAOD ZIP FOR ALL FILES A full-scale-look, test-flown 2.4 m wingspan Blanik L-13 you can print at home on any 200×200×200 mm printer. Designed for LW-PLA / LW-ASA airframes,…
Váza o výšce 400m. Tištěno na poloviny. Spodní díl tíštěn v normální poloze, horní díl obráceně z důvodu minimalizace spojovací mezery. Poloha dílů zajištěna třemi čepy. Před slepením ověřte vzájemnou polohu horního a spodního dílu.…
DXF file to get a single piece cut out to serve as the rear shelf cover in the VC3.1 400mm. Single piece design is stronger and seals substantially better than the stock printed type most V-Cores came with. Includes a nice TPU gasket to…
Both pieces should print in the orientation they open up. I sized the tongue and groove slots to be a nice medium for both unfilled and filled filaments to allow easy enough removal of the spool mount post from the main body while also…
My take on a led diffuser designed to fit in the T-slots of the ratrig or voron printers. Will only fit 400mm or bigger versions with confidence, maybe a 350 but i don't have one. Printed in ABS-GF with 24V cob led strip. No supports…
The downside of my Canon 400mm DO IS L lens is that the lens foot is teeny tiny and a pain to hold especially with a teleconverter mounted. This model extends the foot over 100 mm and mounts with a screw. Obviously you would want to use a…
Radius Gauge for Ibanez GRG 221, sldprt file attached for any tweaks to accommodate different neck radiuses, also numbering on the gauge was removed.
The Sony 400mm-800mm G lens has a screwed on tripod foot. Most of the time I will likely leave it on, but if removed there is an unpainted hole with an opening into the body of the lens (there's a screw inside, likely for service). This…
This is a remix of a remix of this model: https://www.printables.com/model/1101713-ratrig-vcore4-btt-hdmi7-mount-on-side-of-enclosure . Follow the instructions on this page. For printing I recommend adding a brim and use gyroid infill to…
I made this mount for my Tamron 100-400mm lens because the official one from Tamron is way too expensive. I designed it to mount to my promaster tripod's quick release system, but theres also a hole in the bottom for a ¼ 20 threaded…
I have created a “ First Layer Calibration Test ” for the most common print bed sizes. Load the file with the appropriate size into your slicer and then print like other models. You will then see where your printer still has problem…
Small lens hood for Sigma DG 120-400mm f:4.5-5.6 OS APO HSM. I have and APS-C camera and you cant see it, but on a full frame camera it might cause vignetting at the wider focal lengths.
🛩 Blanik L-13 — 2400 mm Scale RC Glider, fully 3D printable DOWNLAOD ZIP FOR ALL FILES A full-scale-look, test-flown 2.4 m wingspan Blanik L-13 you can print at home on any 200×200×200 mm printer. Designed for LW-PLA / LW-ASA airframes,…
The OG part was too expensive so i made it myself. It mounts on my random cheap tripod because thats what it'll be mounten on. I do want to add a 1/4" thread version so i can be used on any tripod. There are still improments to be made.
One ring is adjustable and doesn't bock lock button. Another one is fixed and may require a little bit of sanding depend
Unfortunately bleugh's fantastic belt tensioner (thanks for that btw) doesn't fit the D9 MK2 400mm version: the Y-axis wheels collide with it when moving the bed to something like >370mm (which happens at every z-calibration). So I just…
This is a simple remix of bLITzJoN's brackets. The changes made are Adapted for 3mm or 4mm glass thickness Recessed the fixing holes so the original bolts can be used Elongated the fixing holes so there is more adjustment to account for…
I was looking for a way to mount leds to light up my build volume, so here's a led holder with M5 bolt-holes and a diffuser which connects to the led holder with 2,5mm strips. The diffuser should be printed in clear PETG with 100%…
Made this to gently guide filament from the side of my printer up and over to the center of lid over the bed. I kept having issues with rougher filaments binding in PTFE when it had anything more than VERY gentle curves. I use this with…
Just took the stl and separated both pices for easier printing and orienting on the printer. Will uploade a picture of the print Print Settings Printer: Aquila Rafts: Yes Supports: Yes Resolution: 200 Infill: 80 Filament: Creality PETG…
This covers the inconvenient hole in the lift-out tray of the Tactix 400mm Toolbox. Install the cover by pushing one of the long edges up through the hole from underneath, then rotating the other long edge up above the hole and push down…
(Abandoned, but published for posterity) This is my design for the V-Core 3, it is still a work in progress but most things are running on my V-Core 3. I'll list the parts i'm still working on below. You'll have to import the step file in…
Note that the tolerances are relatively tight so the the filter can fit over the lens but can also be easily removed when required. Snug but not too tight a fit. Part 1 is the mount that goes over the lens hood. The internal hole is sized…
I printed the model in PLA and PETG with no problems at all. It was printed as per the original.
Lens Hood Nikon F AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D use fuzzy skin to beter look Category: Camera
Bowden tube arm guide mount added to a 400mm led bar to use status led strip as well as Bowden arm.
