P
Printablesthall72
Lego Compatible (14418.dat) Plate 1 x 2 with Socket Joint-8 with Friction
This model is compatible with the lego system.
- Pobrania
- 1280
- Polubienia
- 71
- Ocena
- 0
Wyniki wyszukiwania: 441
Liczymy pasujące modele…
P
PrintablesPavan Krishna
NACA 4412 Rib
This is a NACA 4412 based rib to build your own wing.
- Pobrania
- 484
- Polubienia
- 12
- Ocena
- 0
P
PrintablesRCFD
Vase mode wing with double wing spars (NACA 4412)
My attempt at the Tom Stanton VTOL wing. With two wing spars (16mm and 8mm) spaced 70mm from each other. Level with another at 0 deg of attack. Wing chord ~180mm Wing height ~23mm Ribs spaced 30mm apart.
- Pobrania
- 436
- Polubienia
- 23
- Ocena
- 5
P
Printablesnean
Mic clamp Sinhaiser md441-u
Mic clamp compatible with Sennheiser 441/541 microphones. This has nothing to do with the original spare part from Sennheiser, nor is it a clone. It has been created from scratch, hours of measurements on the mic, adoptions and iterations…
- Pobrania
- 367
- Polubienia
- 8
- Ocena
- 5
P
PrintablesINVESTEGATE
INMP441 Digital Microphone Mic I2S MEMS Holder Mount Bracket Cap
Hey, i designed a easy cap for the INMP441. If you want to fixate it, just use hotglue or similar. Leave a like if you like it ;)
- Pobrania
- 334
- Polubienia
- 22
- Ocena
- 5
P
PrintablesMarko
LEGO 14417 6039479 plate 1x2 with ball
My kids lost their lego. So I drew them a new one in f360. I also included a step. file if anyone wants to correct the tolerances. Print in PETG
- Pobrania
- 299
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFaruk TOY
NACA 4415 Aerofoil with lines
Above all, I would like to thank my lecturer Burak GÜLER for his inspiration and advice in creating this model. This model based on the NACA 4415 aerofoil and the UIUC Airfoil Database . The model is intended for educational and…
- Pobrania
- 271
- Polubienia
- 5
- Ocena
- 5
P
PrintablesHamzaCinar
KILLFLASH for MB4412 Sniper Scope
Because there is no Killflash on the Market for the MB4412D Sniper Rifle Scope, i designed a killflash on my own. This killflash is maybe not as good as it could be so you are invited to improve it! This basic sample was good enough for…
- Pobrania
- 249
- Polubienia
- 49
- Ocena
- 0
P
Printablesaarrodri
Bambu Lab X1 NOCTUA motherboard/MCU Fan holder for 4410
My motherboard fan sounded like a motocross bike so time to replace. This holder hangs on to the poop chute with double sided tape. No need to remove heatsink, or even remove the old fan if you don't want to. Use the connectors that come…
- Pobrania
- 217
- Polubienia
- 50
- Ocena
- 5
P
Printablesthall72
Lego Compatible (44148.dat) Technic Bionicle Rahkshi Upper Leg Section
This model is compatible with the lego system.
- Pobrania
- 189
- Polubienia
- 30
- Ocena
- 0
P
PrintablesFoden
ESP32 ESP DEVKITV1 case with INMP441
ESP32 ESP DEVKITV1 case with INMP441
- Pobrania
- 164
- Polubienia
- 12
- Ocena
- 5
P
Printablesthall72
Lego Compatible (44138.dat) Bionicle Foot Rahkshi
This model is compatible with the lego system.
- Pobrania
- 163
- Polubienia
- 24
- Ocena
- 0
P
Printableskjbturok
Fan holder 4410 for Bambu X1 motherboard
To replace the original fan of the Bambu X1 motherboard without disassembling the original one. This is a bracket for a 4410 fan (in my case I used a noctua NF-A4x10 5V PWM) to install on the Bambu X1 3d printer without disassembling the…
- Pobrania
- 145
- Polubienia
- 52
- Ocena
- 4,67
P
PrintablesRCFD
Vase mode wing - Single 16mm spar (NACA 4412)
The cutouts are for wire pass through for a upcoming project (as well as a locating hole for fixing the AOA) Chord: 180mm Spar: Center 58mm from the front Length: 250mm Thickness: 23.1mm
- Pobrania
- 139
- Polubienia
- 3
- Ocena
- 0
P
Printablesthall72
Lego Compatible (44144.dat) Bionicle Rahkshi Back Blade, 3 Thick Bladed Fins (Lerahk)
This model is compatible with the lego system.
- Pobrania
- 132
- Polubienia
- 22
- Ocena
- 0
P
Printablesthall72
Lego Compatible (44139.dat) Constraction Rahkshi Kraata Holder
This model is compatible with the lego system.
- Pobrania
- 122
- Polubienia
- 16
- Ocena
- 0
P
Printablesasoli.dev
ESP32 Enclosure with INMP441 mounting for WLED setups
An ESP32 enclosure for WLED setups with an optional housing for INMP441 I2S digital microphone for soundreactive-awesomeness. The ESP32 boards that I use are from AZDelivery ( Amazon Link ) The enclosure has snap-on cover and two design…
- Pobrania
- 111
- Polubienia
- 14
- Ocena
- 5
P
Printablesthall72
Lego Compatible (44136.dat) Constraction Block 2 x 7 x 3 Curved with Forked Axle Hole
This model is compatible with the lego system.
- Pobrania
- 104
- Polubienia
- 16
- Ocena
- 0
P
PrintablesThomas Taffelt
Servo Halter SPT4412LV Stealthburner/CW2 + Upgrade
Bau und Programmieranleitung gibt es auf Youtube #### Neu #### Upgrade Dateien aus dem Video
- Pobrania
- 104
- Polubienia
- 33
- Ocena
- 4
P
PrintablesHamzaCinar
FOREGRIP for MB44 Series, MB4412, CUSTOM TACTICAL GRIP
IF YOU LIKE WHAT I AM DOING, THEN PLEASE GIVE ME A THUMBS UP! And if you think this part is worth it, maybe you can give me some support with a tip? Im working on the publish for the sniper rifles which is the magazine from the MB44…
- Pobrania
- 93
- Polubienia
- 37
- Ocena
- 0
P
Printablesdsnineteen
Keyestudio 5V Relay Modelling Aid (Dummy CAD File) XC4419
A small model of a commonly-sold 5V relay block to use when laying out electronics bays and the like. Not really intended for printing, rather to use as a guide for mounting hole placement and height clearance etc. It's as accurate…
- Pobrania
- 90
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKotyarko_O
Bmw E30 - mirror wiring bottom cover (OEM: 51 16 1 937 441-444, 51 16 1 937 442-443)
Bmw E30 - mirror wiring bottom cover. OEM-numbers: left side: [LHD] 51 16 1 937 441; [RHD] 51 16 1 937 443 right side: [LHD] 51 16 1 937 442, [RHD] 51 16 1 937 444 Modeled for LHD. For RHD just mirror the model in your slicer according to…
- Pobrania
- 75
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSven
Miele valve adjustment for 05104411
This part replaces the original slide valve wich is prone to breaking. Instead of buying the whole thing, you can get going with this. Please mind the instructions at the print settings section! Print Settings Printer Brand: Creality…
- Pobrania
- 72
- Polubienia
- 2
- Ocena
- 4
P
Printablesaarrodri
Bambu lab X1 MCU fan for 4410 Noctua. remixed from two 4410 models into one.
remix to make it easier to mount unmount. Used two different models available into one. Use the connectors that come with NOCTUA to connect the old fan adapter to the new fan as below (listed in order as in stock fab cable): STOCK ===…
- Pobrania
- 69
- Polubienia
- 14
- Ocena
- 0
P
PrintablesStan
Makita P-84414 makstor partition
Works with P-84311 Makstor nr.3-4 P-84327 Makstor nr.3-12 P-84349 Makstor nr.4-5
- Pobrania
- 53
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBLKFSH
Sennheiser MD 441 Microphone Desk Stand inspired by MZT 441
This is a desk stand for the classic Sennheiser MD 441 microphone. I wanted it to look like the original MZT 441 stand you could buy for the microphone, but since I didn't have one myself I modeled it after reference images. Still, from…
- Pobrania
- 52
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSolunark
Mikrofonklemme für MD441
eine M4x20mm Flachkopfschraube und eine 15x1,5mm Unterlegscheibe werden zusätzlich benötigt. wenn die klemme zu fest bzw zu weit hinten sitzt, einfach BEIDE Teile etwas größer skalieren. ich empfehle jedoch nicht mehr als 0,5%, denn dann…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHHobbyist
Scotty 441 Backing Plate
This is a re-creation of the Scotty 441 Backing Plate. It is used to add structure behind 241/244 4-bolt mounts on thin-walled vessels. You can also use it as a spacer, which is what I use it for. Printing Recommendations: Print with ASA…
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJuju
Rallonge clignotant (stay winker) 500cb ref. 33441MY5730
Bonjour, Nos 500cb ont bientôt 30ans pour les plus vieilles (comme la mienne l'année prochaine!). Et généralement si vous avez les clignotants d'origine, ils finissent pendus au bout de leurs fils! Rien y fait même en rachetant la…
- Pobrania
- 38
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHarrdy
Eheim Absperrhahn / stopclock holder - 4004512 4005510 4004412 4005410
This is a custom-designed holder for the following Eheim models: Eheim 4004512 Eheim 4005510 Eheim 4004412 Eheim 4005410 The holders are available in two different sizes, 20mm and 30mm. You can choose between a single holder or a dual…
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
Printables3D Functional Print Art
441 millimeters diameter half circle
it is half circle coping template for outer diameter 441mm. Accuracy is depending on your printer, gluing and other skills to assembly it correctly.
- Pobrania
- 31
- Polubienia
- 0
- Ocena
- 0
P
PrintablesScoobert
Rosewill RSV-L4412U 360mm AIO Bracket
For Rosewill RSV-L4412U 4U server chassis, will support up to 360mm AIO's and fans in push pull. Pressure fit, however if you wish it has enough thickness and height to be screwed in with heat sets on both sides with the stock holes in…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStawiamKlocki.pl
Display Stand for Welly WE22441 DeLorean DMC-12 Time Machine Back to the Future Part 2
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMio Menn
Hydrofoil front wing - gaastra mount - Naca 4412 1300cm² 110span 16chord 9.1 AR
https://cad.onshape.com/documents/35b39d8c8107c2b331d2780e/w/256abfa0e0ee655659f38151/e/91e73e25f4508157b69f15c5?renderMode=0&uiState=6a8b2185bd0b2e6c57989a03
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHarsesis
Wera 7400 Torque Screwdriver Holder (7440 + 7441)
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDavidK
Agilent 34410A Push Rod Repair
New end for the ON/OFF switch push rod
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBerkay
LP 441 Soft Shake Shaker Joining Device
The rubber of the shaker, which was held together with the rubber, broke. With this design I made, you can hold 2 Shakers together. Requires 6 m3 x 5 bolts and 6 nuts.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNutterflies
Oleo mac | Sparta 441 T | corrugated hose spacer
Spacer for any weedeater with 28mm pipe and below 14mm corrugated hose . ASA or PETG recommended works just fine with PLA too 15% infill | support recommended M3 bolt and nut needed.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCodex Fons
Magnetic camera holder for monitoring BOSCH WNA13441 wash dryers with Home Assistant
Smart household appliances tend to be short-lived due to the added complexity creating more points of failure. If you must have some smartness in your appliances, it's sometimes a good idea to add it on as a separate system. This solution…
- Pobrania
- 13
- Polubienia
- 16
- Ocena
- 0
P
PrintablesMatěj Slíva
GP Recharge B441 SKADIS holder
I have made a model for storing my GP battery charger model B441 on IKEA Skadis board. Need a little bit of support for the hooks.
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMuffelkraft
TPU Push-On Tire for Janod Baby Walker (J04410)
This is a push-on replacement tire designed for the Janod Multi-Activity Sweet Cocoon Baby Walker (J04410) . Print it in TPU and simply press it onto the existing plastic wheel — no glue, no tools, no wheel disassembly required . The tire…
- Pobrania
- 11
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMatthew Pitta
Midi Scale Venator Wall Mount 75441
Printed in PETG-CF with 4 walls and 9% gyroid infill.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesmeshvault3d
Alpine A441
Alpine A441 is a 3d printable scale model stl of the real civilian race car for display and diorama builds. Use it for automotive collections, shelf display, scale racing dioramas, and detailed tabletop projects where you want an accurate…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printableswhilex
PeakTech 3441 Multimeter - Wall Mount
Easy print. store the probes as well
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDanny
UWE UT441 Flatbed adapter plate for HE&P Flat Plates
HE&P sell flatbed attachments if you're looking for one, but I had UWE's and wanted to keep using it. https://heprecision.com/
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMiamiMan
MAX4410 amplifier boards enclosures
Small enclosure boxes for MAX4410 headphone amplifier boards, which you can get for cheap from Aliexpress. The lid is designed to be snap fit and can be closed relatively easy, but for opening it you may need to help yourself with…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMA Maker Dad
Handle for Dayton 2X441A Switch
The production guys broke the handle off of the switch for our vent fan to I whipped one up real quick. Printed from ABS, 4 walls, 50% hexagon infill. 3 solid top/bottom layers. This was specifically for the Dayton 2X441A switch but…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printablesmcmotton
Constructa CG441V9/36 dishwasher waterpocket screw wrench
Wrench to unscrew the outlet opening. Loosening the water bag from the machine.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTrueGeometry
Customizable NACA 4415 Aerofoil Section with Reference Lines - Parametric
A customizable NACA 4415 aerofoil wing section with the four classic construction lines printed onto the end face in color: chord line (red), camber line (blue), max-thickness line at 30% chord (brown) and leading-edge radius circle…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAaron's lab
Bosch Front Cord Wrap for Miter Saw 4412, 5412L, 4410L
( USE ABS!!!! ) for Bosch 2610915694 Front Cord Wrap for Miter Saw 4412, 5412L, 4410L this is longer than the normal part.
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTrueGeometry
Customizable RC Wing Rib-and-Spar Structure (NACA 4415)
A built-up RC wing skeleton you can resize in one edit: 13 laser-style NACA 4415 ribs on two spar tubes, root and tip caps, a servo box, and an optional translucent skin - all generated with native TrueGeometry Playground commands, no…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTrueGeometry
Customizable NACA 4412 Wing Rib: Hollow D-Cell RC Rib with Spar Slot (Parametric Presets)
A lightweight, fully 3D-printable RC wing rib: a hollow NACA 4412 aerofoil wall, a closed leading-edge D-cell, two spar webs forming an 8 mm rectangular spar slot, and a hollow aft bay. Built and exported entirely in TrueGeometry…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMuffelkraft
Janod Baby Walker Click Wheel Cap (J04410)
Description This is a replacement click wheel cap for the Janod Baby Walker (J04410) . The original part contains a small internal pin that creates the clicking sound when the wheel/knob is turned . In my case, this pin had broken off, so…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDominik Valeček
Replacement Vacuum Cleaner Opening Button for Concept VP4410 Deeser Ultimate
Replacement opening button for the Concept Deeser Ultimate vacuum cleaner. This 3D printable part is designed to replace the original button used to open the dust bin compartment. The part can be printed using PLA filament and is designed…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAlejandro Landini
Lever, Shift Rod. 63V-44121-01. Parsun, Hidea o Seapro de 9.9 HP y 15 HP
🇦🇷 ¿ESTÁS EN ARGENTINA Y NO TENÉS IMPRESORA 3D? Si necesitás este repuesto listo para colocar en tu motor (impreso en material náutico de alta resistencia), realizo envíos a todo el país. 👉 Podés comprar la pieza física impresa…
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
Printables
Mikrofonklemme für MD441
eine M4x20mm Flachkopfschraube und eine 15x1,5mm Unterlegscheibe werden zusätzlich benötigt. wenn die klemme zu fest bzw zu weit hinten sitzt, einfach BEIDE Teile etwas größer skalieren. ich empfehle jedoch nicht mehr als 0,5%, denn dann…
P
Printables
Bosch Front Cord Wrap for Miter Saw 4412, 5412L, 4410L
( USE ABS!!!! ) for Bosch 2610915694 Front Cord Wrap for Miter Saw 4412, 5412L, 4410L this is longer than the normal part.
P
Printables
TPU Push-On Tire for Janod Baby Walker (J04410)
This is a push-on replacement tire designed for the Janod Multi-Activity Sweet Cocoon Baby Walker (J04410) . Print it in TPU and simply press it onto the existing plastic wheel — no glue, no tools, no wheel disassembly required . The tire…
P
Printables
Skadis holder for Wera 7441 torque driver
Skadis / Skådis holder for Wera 7441 torque driver. 40mm wide so it fits next to another holder. Uses an universal hook from CSD_Salzburg . Please share a make. It's fun to see :)
P
Printables
Janod Baby Walker Click Wheel Cap (J04410)
Description This is a replacement click wheel cap for the Janod Baby Walker (J04410) . The original part contains a small internal pin that creates the clicking sound when the wheel/knob is turned . In my case, this pin had broken off, so…
P
Printables
MAX4410 amplifier boards enclosures
Small enclosure boxes for MAX4410 headphone amplifier boards, which you can get for cheap from Aliexpress. The lid is designed to be snap fit and can be closed relatively easy, but for opening it you may need to help yourself with…
P
Printables
WT32-ETH01 + Step-down + INMP441 mic case
I wanted to create case for home assistant voice command device based on wt32-eth01. Mic should be separated and should not touch the case so i am gonna use soft double-sided sticker. One day I will create the top for the case🙂
P
Printables
Lego Compatible (14417.dat) Plate 1 x 2 with Ball Joint-8 on Side
This model is compatible with the lego system.
P
Printables
Altec Lansing Kids Headphone Band Repair MZX4410
Support piece to repair a broken headphone band. Peel back the foam pad and slide this on. Stick the foam pad back on. Optional - Add epoxy to the broken edges prior to sliding this on for an even sturdier repair. Printed this on the long…
P
Printables
Arris TG6441 Wall Mount
Wall Mount for Arris TG6441. I couldn't find a ready-made model, so I drew it myself and it works great.
P
Printables
Lego Compatible (14419.dat) Plate 1 x 2 with Socket Joint-8 with Friction and Ball Joint-8
This model is compatible with the lego system.
P
Printables
ORGANIZZATORE GT441
ORGANIZZATORE GT441 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
P
Printables
Lego Compatible (44140.dat) Constraction Rahkshi Back Cover with Groove
This model is compatible with the lego system.
P
Printables
Wera 7440 and 7441 Gridfinity Bin
A bin to hold your Wera 7441 and 7440 torque screw driver.
P
Printables
Lego Compatible (2441.dat) Car Base 7 x 4 x 0.667
This model is compatible with the lego system.
P
Printables
Skadis holder for Wera 7441 torque driver
Skadis / Skådis holder for Wera 7441 torque driver. 40mm wide so it fits next to another holder. Uses an universal hook from CSD_Salzburg . Please share a make. It's fun to see :)
P
Printables
WT32-ETH01 + Step-down + INMP441 mic case
I wanted to create case for home assistant voice command device based on wt32-eth01. Mic should be separated and should not touch the case so i am gonna use soft double-sided sticker. One day I will create the top for the case🙂
P
Printables
Lego Compatible (7441.dat) Minifig Hair Flaming
This model is compatible with the lego system.
P
Printables
IMP441 microphone reference model
IMP441 microphone module model. Lengh of the legs match a header and pin combination. End of the pin should be aligned with the bottom of the board.
P
Printables
Holder for Dremel tool stand (HoneyComb) (as pointed out by @MarioVerdejo_1234412 this print is 90 Degrees the wrong way)
Dremel tool stand Holder remel XS17 – 2222 Flex Shaft tool holder for Dremel XS17 Dremel 225 flexible shaft tool holder the top/front/1st cut is slightly smaller to accommodate the smaller middle pipe that has a taper on each end
P
Printablesulf3d
BMW E46 Facelift Front Bumper Tow Hook Cover – OEM 51117044125 / 51110030352
3D-printable replacement front tow hook cover for BMW E46, replacing BMW part numbers 51117044125 and 51110030352. Includes a separate printable spring/retaining clip for secure installation. A functional 3D-printable replacement for the…
- Polubienia
- 4
- Ocena
- 0
P
Printables
Lego Compatible (14417.dat) Plate 1 x 2 with Ball Joint-8 on Side
This model is compatible with the lego system.