P
Printablesthall72
Lego Compatible (14704.dat) Plate 1 x 2 with Socket Joint-8 with Friction Centre
This model is compatible with the lego system.
- Pobrania
- 1442
- Polubienia
- 71
- Ocena
- 0
Wyniki wyszukiwania: 470
Liczymy pasujące modele…
P
Printablesthall72
Lego Compatible (60470b.dat) Plate 1 x 2 with 2 Clips Horizontal (Thick C-Clips)
This model is compatible with the lego system.
- Pobrania
- 886
- Polubienia
- 43
- Ocena
- 5
P
Printablesthall72
Lego Compatible (3470.dat) Plant Tree Oval 4 x 4 x 6
This model is compatible with the lego system.
- Pobrania
- 353
- Polubienia
- 51
- Ocena
- 5
P
PrintablesAJK
AEG Electrolux 8996470604712 Adjustable Tumble Dryer Foot
AEG Electrolux 8996470604712 Condenser Tumble Dryer Foot Visit the AEG Store Print instructions For optimal results, please adhere to the following recommended print settings: Filament Type: PETG. Print Layer Height: 0.10mm Perimeters:…
- Pobrania
- 291
- Polubienia
- 14
- Ocena
- 5
P
PrintablesBen
Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
- Pobrania
- 281
- Polubienia
- 25
- Ocena
- 0
P
PrintablesJwidess
GX470 Backup Camera Mount - Lexus 2006
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
- Pobrania
- 268
- Polubienia
- 24
- Ocena
- 5
P
Printablesanonxyz
ThinkPad T470 T480 T570 T580 T25 24Wh Battery
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
- Pobrania
- 265
- Polubienia
- 19
- Ocena
- 4
P
PrintablesPejek
HDD SSD Hard Drive Caddy Bracket for Lenovo Thinkpad T470 T480 T570 P50 P51 P70 P71 P72 E460 E580 E15 R14 E14 T14 S3 Caddy Holder
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
- Pobrania
- 209
- Polubienia
- 20
- Ocena
- 0
P
Printablestmorris9
Velbon Stratos 470 Tripod Quick Release
Also leaving my quick release behind so I printed a spare. Print 100% solid (really it's not that much material and you want it strong). You need support for the inset, this inset is for an E-clip used to hold the 1/4-20 screw in place so…
- Pobrania
- 184
- Polubienia
- 12
- Ocena
- 5
P
PrintablesPanda Pandowski
AMD 4700S Desktop Kit Cooler 120mm fan adapter
Since there are no official aftermarket coolers for AMD 4700S Desktop Kit, or any 3d printable parts which could help do it with any other cooler. I decided to try something first myself. I noticed that you can easily swap the 80mm fan…
- Pobrania
- 173
- Polubienia
- 10
- Ocena
- 0
P
PrintablesWiseone
Pyrex Round Glass Storage Dish 470ml Lid
I've found the Pyrex 470ml round storage Dishes very useful. Though over time, the plastic lids become stiff and brittle. This 3D print in TPU filament makes a remarkably good replacement lid. The lid is 126mm in diameter and 10mm high…
- Pobrania
- 171
- Polubienia
- 11
- Ocena
- 0
P
PrintablesGeekMystique
Super simple vertical laptop stand (T490s, T470, Acer Chromebook, many more)
Print with 3 walls. No brim required usually. f360 file included.
- Pobrania
- 166
- Polubienia
- 14
- Ocena
- 5
P
PrintablesKOSERO
La Pavoni boiler flange / nut / ring Remover (For the 31104702)
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
- Pobrania
- 158
- Polubienia
- 9
- Ocena
- 5
P
PrintablesBerkay
İbanez s470 pickup frame
The humbucker pickup frame I designed for my Ibanez s470 guitar.
- Pobrania
- 139
- Polubienia
- 21
- Ocena
- 5
P
PrintablesDigital Crunk
ASRock Rack X470D4U IO Shield for SuperMicro SC512 Series Case
The IO Shield that comes with the X470D4U motherboard does not fit the SuperMicro SC512 series chassis. This solves that problem. This was modelled with a SC512F-350B chassis. Print instructions You may need to slightly shave with a sharp…
- Pobrania
- 130
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBurak
Campingaz CV470 stand
Simple, yet stable stand for Campingaz CV470 gas cylinder to make it more stable on a sruface. It is 2 part design for easier transport. Print with ABS or ASA for temperature stability 0.2mm layer, 20% infill. Supports are needed for the…
- Pobrania
- 121
- Polubienia
- 15
- Ocena
- 5
P
PrintablesBoBaCool
Mini cage container - Marklin 44700 container carrier - mini conteneur cage
Mini cage container for Marklin 44700 container carrier wagon Mini conteneur cage pour wagon porte conteneur Marklin 44700
- Pobrania
- 116
- Polubienia
- 8
- Ocena
- 0
P
PrintablesStawiamKlocki.pl
LEGO 75c19 / 47043 / 76257 Black Hose Rigid 3mm D. 19L 15.2cm for Star Wars Anakin's Podracer 7131
I bought incomplete LEGO 7131 Star Wars Anakin's Podracer - the only thing missing was Black Hose Rigid 3mm D. 19L 15.2cm 75c19 / 47043 / 76257 🔗 so quick Fusion360 project and it's done! Print tip! PLA is fine print 0,15mm in lower speed…
- Pobrania
- 110
- Polubienia
- 16
- Ocena
- 0
P
PrintablesDingo
HD7470 Full Height Bracket for GPU
Simple model, printed flat. May suit other graphics cards.
- Pobrania
- 107
- Polubienia
- 9
- Ocena
- 0
P
PrintablesStarstreak Designs
Case 2470 Tractor - 1:16th Scale
Case 2470 Tractor - 1:16th Scale Uses M4 & M2 Screws Uses Chunky Crab Planetary Rims and Tires (See other models from us)
- Pobrania
- 101
- Polubienia
- 13
- Ocena
- 5
P
Printableslolthekidison
XT30 470uf 35v Capacitor Mount
Recommended Print in TPU. No supports needed, Pre orientated. Separates Voltage and Ground. Securely holds XT30 to Capacitor. Solder Capacitor to Pigtail. Press into TPU. Solder to ESC. Capacitors seems to come in at different sizes with…
- Pobrania
- 99
- Polubienia
- 8
- Ocena
- 5
P
PrintablesSethOne
FIVE33 Switchback - TPU capacitor holder 470 uF / 50V
FIVE33 Switchback - TPU capacitor holder 470 uF / 50V
- Pobrania
- 88
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRaphael
wallmount for Logitech MK470 Tastatur
wallmount for Logitech MK470 Tastatur , you need to print the right an the left side.
- Pobrania
- 83
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBrusli009
IO shield for MSI X470 Pro Carbon/AC
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
- Pobrania
- 83
- Polubienia
- 5
- Ocena
- 0
P
PrintablesStarstreak Designs
Case 1470 Closed Station Tractor - 1:16th Scale
Case 1470 Closed Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles
- Pobrania
- 79
- Polubienia
- 10
- Ocena
- 0
P
Printablesthall72
Lego Compatible (2470.dat) Wheel 2.8 x 27 with 8 Spokes
This model is compatible with the lego system.
- Pobrania
- 78
- Polubienia
- 16
- Ocena
- 0
P
PrintablesLukáš Sládek
Vankyo Leisure 470 projector holder
Ceiling mount for the Vankyo Leisure 470 projector. There are 2 versions - one for projecting the image downwards on the table (floor, for sewing with the projector) and the other for the direction forward (projection on the wall, this…
- Pobrania
- 76
- Polubienia
- 14
- Ocena
- 0
P
Printablesomfartal
Thinkpad T470/T480 Smart Card Reader Cover
This is a smart card reader cover for thinkpads. It is designed for T480 but it should work on others too. To make it look perfect, sand with ~600 sandpaper. Height of thinner part: 1.25mm Height of thicker part : 1.5mm Print Settings…
- Pobrania
- 75
- Polubienia
- 19
- Ocena
- 0
P
Printablescaribou
Axial SCX24 High Clearance Suspension Links - GX470
I HAVE NOT TESTED THIS SIZE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
- Pobrania
- 73
- Polubienia
- 16
- Ocena
- 0
P
PrintablesKornel
GPU Bracket RX 470 SERIES AMD RADEON MINIG AND NORMAL
I need this thing and i create this Its 120 mm length and 40mm height I printed this on Anycubic Kobra 2 PRO
- Pobrania
- 70
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBasementLAB
Honda Side Cover Collar for HONDA Fairings - Collarino Carene Laterali - Honda Part Number 84702KV0670
Honda Side Cover Collar - Africa Twin RD03_RD04 and many other models - Collarino Carene Laterali Honda Part Number 84702KV0670 - 84702-KV0-670 The Collar is used on 9 models from 1990 to 2014: Honda VF750C Honda VT1100C2 HondaVT750C2…
- Pobrania
- 59
- Polubienia
- 4
- Ocena
- 0
P
Printablesthemelle
Shimano Big Baitrunner XT-A Long Cast Spool (RD14707)
Got a request to design a spare spool for the discontinued Big Baitrunner XT-A Long Cast from Shimano (Item code RD14707) After some iterations this is what seems to work best. Optimized for FFF. Tight lines!
- Pobrania
- 54
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTexas Jack
470 Nitro Express Cartridge + Brass Case dummy
The .470 Nitro Express is a rifle cartridge developed by Joseph Lang for dangerous game hunting in Africa and India. These files allow you to print an exact replica of this cartridge or brass case. Both the files can also be used to print…
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 0
P
Printables6d6178
PB Swiss Tools PB470 M Adapter Grip
This is a grippy sleeve for the PB Swiss Tools PB470 M 5mm hex to C6 bit adapter. It allows you to use the adapter as a finger bit holder to finger-tighten things that are hard to reach or just need a lot of finger control. All while…
- Pobrania
- 47
- Polubienia
- 16
- Ocena
- 5
P
PrintablesAPz
Funhouse / Road Show animatronic head sector gear (03-8470 compatible)
This is the sector gear that drives character mouths in Road Show and Funhouse pinball machines. The original Williams part number is 03-8470. I recommend printing this out of PETG or stiffer material, although the PLA prototype has…
- Pobrania
- 45
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMadKwad
XT60 470uf capacitor holder
A mount to hold a 470µF capacitor on an XT60 connector. It may not fit all capacitors, the diameter is 10.5mm. Print it in TPU to absorb shocks.
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBenevolensky
GX 470 backup camera mount
This remix is adapted to the Junsun 720p backup camera, the original model needed a small tweak to fit this camera better. Just print and mount, great fit!
- Pobrania
- 39
- Polubienia
- 7
- Ocena
- 0
P
PrintablesStarstreak Designs
Case 1470 Open Station Tractor - 1:16th Scale
Case 1470 Open Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles
- Pobrania
- 39
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKevin
KAON Rear Roof Shelf GME AE4705B/AW4704B Antenna Storage Clamps
These clamps will hold either a GME AE4705B or AW4704B (they can be purchased as a twin pack AE4705BTP) antenna onto the KAON Rear Roof Shelf so that it's out of the way and secured in place. They are designed to allow you to quickly but…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTexas Jack
.470 NE 50 rounds box
Update 30/09/2024 - V2 is now live! Addressed an issue with the lid hinge not generating properly, check again the .stl files if you downloaded previous to this date, now the assembly is gonna be definitely sturdier!…
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
PrintablesWeston Graham
PeliPC 1470 (Version 0.5)
(STILL UPDATING AND UPLOADING NEW FILES) The PeliPc 1470 is my initial design for creating a series of parts that allow PC builders to take mini itx components and put them into a Pelican Case. The novelty with this design however is the…
- Pobrania
- 37
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDotNetWorker
Sherwood PF-1470 turntable record player cover hinge
I drew up this replacement hinge for fixing Sherwood record player, turntable and was surprised how well it works. Mine was printed with hotter settings (PLA) to get good strong interlayer bonding, best printed on side for strength with…
- Pobrania
- 36
- Polubienia
- 1
- Ocena
- 0
P
Printablesrussian_spy
Lenovo thinkpadT-470S vertical stand
A vertical stands for a Lenovo T-470S Needs 4x M4x12mm Counter sunk Screws https://cad.onshape.com/documents/12fb459e04ee54ef71417ee1/w/22e1f91618245641cb708e2b/e/74741ba472c6ee3843f78730?renderM
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPyrobi
Kensington SD4700P Dock Under Desk Bracket
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
Printablesomfartal
Thinkpad T470/T480 Vertical Stand
This is a vertical laptop stand. It's also called as necksaver:) It's designed for Thinkpad T480 but you can use for any laptop which has proper dimensions. The second version is designed to prevent falling etc. But the movement…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLukáš Sládek
Držák projektoru Vankyo 470
Držák LED projektoru Vankyo 470 - montáž na strop, případně zeď. Vytvořen pro šití s projektorem - promítání střihu na stůl/látku/řezací podložku. Přidal jsem i varinatu, kdy se projketor namontuje standardně a svítí na zeď.
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNickNothom
Front Differential Overhaul Plugs for Land Cruiser UZJ 100 / LX470
Useful for power washing, scrubbing, cleaning, and painting the housing without letting any contaminants get inside. Also contains the residual gear oil so it doesn't leak everywhere. Note: The driver's side axle plug fits into the axle…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNiels
Furuno Radio Ocean RO4700 Gimbal
This is an overhead mount for the RO4700 vhf radio. I have not installed it yet, but will post pictures from the final result. Printed in PETG with supports and brim (not necessary).
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBrusli009
IO shield for Biostar X370GTN/X470GTN
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJiří Štivar
Čudlík pro sporák Mora 2470
Doporučuji tisknout s 6 perimetry - kvůli pevnosti - a materiál PC nebo něco podobného, co odolá vyšším teplotám.
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNickNothom
Front Axle Delete Plug for Land Cruiser UZJ 100 / LX470
I need to be able to drive my LX470 while I rebuild the front differential. This plug seals off the backside of the hub where the axle would usually go, protecting the bearings and splines. To install, I put 1 wrap of Gorilla tape around…
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTimid Possum
Replacement Leg for Redstone Model CFI-470-11 Electric Fireplace
Replacement leg for electric fireplace model: CFI-470-11. it may fit other heaters like this as well. I'm still testing it to make sure the leg does not soften in operation. I printed in ABS to be safe(r). Electric heaters are no joke; be…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesClslee Lee
HP ProBook 6470b Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 641831-001. Using by HP ProBook 6475b Notebook PC and HP ProBook 6470b Notebook PC. The left rear foot is different from the…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
Printablesmuddymaker
Thermos Stainless King 470ml/16oz Handle & Base
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Thermos Stainless King 470ml/16oz Handle & Base. No supports…
- Pobrania
- 25
- Polubienia
- 8
- Ocena
- 5
P
PrintablesPavel Novák
Gardena 4000/4700 barrel pump hose suction
You can change part at the bottom of the barrel pump to suck water with hose.
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJusPetBob
47053-1000 4-Pin fan header (470531000)
Instructions: You will need a 4 or more (just snap to size) pin header that can be inserted with a pair of pliers, than just remove the original plastic spacer and press them through until ~3 mm are out the back (just reference other…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 5
P
Printablesgauguerilla
Bamboo Pen CTL-470 tablet and pen holder
modified model to fit my Bamboo Pen. After I unearthed it from storage I first got frustrated by the drivers not being supported, then I found out that there are community drivers out there and that i don't have to deal with new hardware.…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJCF.exe
Epson EB470 projector to Vesa mount adapter
This is an adapter to mount Epson EB470 (and possibly other models) projectors onto Vesa mounting plates. I needed to mount my Epson EB 470 projector to a Vesa arm, and I came up with this. Two thicknesses, pick whatever suits you best.…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMids
Tray dividers for Draper 89470 Storage Cabinet
Just a plate of slightly tapered dividers. Simple, but useful. There's a version for each of the three drawer sizes.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
Printablesxblax
Ambiano Food Dehydrator XJ-14709C0 Filament Drying Extension
Extension ring for the Ambiano Food Dehydrator XJ-14709C0 to dry any standard size spools (some similar dehydrator models might be compatible as well). Multiple rings can be stacked to dry multiple spools at once. The ring is split into 6…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesZbigniew Skoczypiec
soko align 470
soko blade mount for align trex 470. 3x walls 3x top/bottom, 0.2mm layer 25% infill 2 bolt 3x10mm
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBarrnet
Funnel for the hydraulic oil. Compatible with Biglia/Eurotech B470 S2M / B465 S2M / B470 S
This Funnel was designed for make easy to refill the tank of the hydraulic oil because all of the older machines in the workshop where I work leaks oil like blood from a man sick of Ebola. With this funnel I can do the job myself, without…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
Printablesreibuehl
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P
Print with TPU and use double sided adhesive tape to mount the feet.
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
Printablesjohnolinda
HP EliteBook Folio 9470m Drive Cover
This replacement drive cover holds the 2.5 inch drive in place inside the HP EliteBook Folio 9470m. It's designed to be economical with your filament while still being strong and flexible. You will need supports on the screw holes.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
Printablespedrolamas
Pulse LED sensor harness for Landis+Gyr E470 Smart Meter
I've recently had a Landis+Gyr E470 smart meter fitted, but unfortunately it has not been able to connect to the network (bad signal inside) so I just built my own pulse LED sensor (based on Home Assistant Glow) As I wanted to assemble…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEconomyPilot
Replacement headset Jabra Pro 9470
Replacement part for your Jabra headset. I have the pro 9470 and over time the circular mount part that goes near your ear broke. I couldn't locate a replacement and I absolutely could not stand taking phone calls without my headset. Ergo…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 5
P
Printablesungamead
Stand for Thinkpad T470s laptop
Simple stand for Thinkpad T470s. The laptop is standing vertically. I use 10% fill, layer height 0.28mm
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printablesdfeissle
Dell M4700 battery cover
Printed using PETG at .30mm draft preset with supports everywhere on the Prusa i3 M3KS. This cover fits in the battery compartment of the laptop. You may need to move push the eject switch all the way in to lock the cover in place. But…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMarcelismus
Tray for Bosch Sanding Blocks S470/471 (or similar)
I prefer to use the Bosch S470/S471 sanding blocks (or other sanding blocks with 69 x 97 x 26 mm) for superficial sanding of smaller parts.This tray holds the Bosch sanding sponges in place so that you can move smaller objects quickly and…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGunnar Lachmann
Foldable Camping Gas Cartridge Stand for CV470
Update: I added a leg with slotted hole for smaller diameters (not testet yet, feel free) material: no PLA infill 30% 6 perimeters print leg and clamp x3 You need 6 M3 screws an 6 selflocking nuts to release the cartridge simply pust the…
- Pobrania
- 10
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSpaceNeko
Dell Inspiron 3470 SFF 2.5" HDD Mount
A single 2.5" HDD mount for dell SFF inspiron. A lot of other hdd mounts were focused on optiplex SFF mounts so I created this one.
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSTxS
Wandhalter / wall mounting holder for Makita DC1470
Dies ist ein Wandhalter für das Makita Akkuladegerät DC1470
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesh3nk
Molex PWM CAP Molex 47054-1000
This is a cap for PWM Ports (Molex 47054-1000) i.e. for open connectors of a PWM-splitter.
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablessyneboi
Lenovo ThinkPad T470 Media Box Conversion
Lenovo ThinkPad T470 Media Box Conversion This project converts a Lenovo ThinkPad T470 motherboard into a compact media server or NAS enclosure while reusing as much of the original hardware as possible. The laptop had a broken screen and…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
Printablesfermit
uTrust 4701 F contactless reader card holder
uTrust 4701 F contactless reader card holder. Clip it on. Holds card in place. Category: Other
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesreibuehl
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** No Supports: No **Resolution:** 0.2 mm Filament: Bambu Lab TPU TPU-95A Black Notes: Print with TPU and mount…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesПресиян Данаилов
Rotary hammer depth gauge cap for Makita HR2470
It was made for Makita HR2470. The shallower hole is meant to be filled with hot glue (the idea is to be overfilled a bit so the tip of the glue is the point that contacts the surface, so no mark is left there )
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesstuntduck
JB470 Table Parts
The hook and sliding piece for JB470 table. When looking it looks like other JDM campers use the same system so will probably fit there. I printed in PETG and it has been holding up. There is a 3rd piece to the system but mine has not…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSmokinWaffle
Remington MB4700 Shaver Holder / Wall mount
Couldn't find a holder / wall mount for my shaver so I knocked one up in Bambu Studio. It's nothing fancy at all (I'm no 3D Designer!) but it works! Hopefully will be of use to someone. Holes in it to reduce filament usage & make it look…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesstuntduck
JB470 Window Blind slider
This clip will help keep rolling blinds in Vantech JDM campers in the track. Mirror to use for other side of window.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printablesstuntduck
JB470 Window Latch
This is a replacement for the window latch on the right side of JB470 and JB500 windows. If you mirror the model it should work on the left side as well. I printed with PETG When removing the original I hit it with a heat gun for a bit to…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesVoid
Velbon Stratos 470 Tripod Tray
Tray for the Velbon Stratos 470 tripod, I needed somewhere to mount my rear speaker, and this works for me. Don't know if there are many other uses for it.
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCozmogeek
Sony ICD-PX470 voice recorder holder
This may work for other sony recorders that use the same sized enclosure but I have not tested that. it is a pretty tight fit so it may require a bit of size adjustment depending on your printer and material.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Kensington SD4700P Dock Under Desk Bracket
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
P
Printables
Velbon Stratos 470 Tripod Tray
Tray for the Velbon Stratos 470 tripod, I needed somewhere to mount my rear speaker, and this works for me. Don't know if there are many other uses for it.
P
Printables
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P
Print with TPU and use double sided adhesive tape to mount the feet.
P
Printables
IO shield for Biostar X370GTN/X470GTN
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
P
Printables
AN 470 Rivet
So this is a very simple not completely to scale AN470 Rivet. I designed it for a show and tell piece at my work. Category: Learning
P
Printables
.470 Nitro Express
Model of the _ cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth and cheap to…
P
Printables
Lego Compatible (44709.dat) Minifig Gun Blaster with Studs on Sides, Bottom and Front
This model is compatible with the lego system.
P
Printables
Wyse 5470 M.2 SSD bracket
M2 brass insert is needed (affinity link), with L = 2mm or 3mm and D = 3.2mm or 3.5mm. There is also a version with an M2 screw directly into plastic without an insert. SCAD source file attached.
P
Printables
Dell Wyse 5470 Kickstand
Hi, this is a quick kickstand I made for the Dell Wyse 5470 AIO I now use as a klipper host. It is designed to hold the Wyse at about a 75 degree angle, but it might work for other 100x100 VESA All In Ones or monitors. I printed it on my…
P
Printables
JVC HR-D470U loading mechanism reduction gear
This is a reduction gear within the loading mechanism of the JVC HR-D470U that I stripped while fiddling around with the mechanism while trying to get it to reliably load a VHS tape Within the first image, you can see the pulley and the…
P
Printables
Wall/Ceiling Mount for 4702 IP Camera
A wall/ceiling mount for a GV-TDR4702 seris mini fixed rugged ip dome camera. Intended to use the mounting screws that come with the camera to fix the camera to the mount and there are 3 clearance holes for 3/16" tapcon concrete screws.…
P
Printables
Dell Dock spacer for E5450, E5470, E7240 E7440 etc.
IMPORTANT: while this part fit perfectly for me, people in the comments report it's too long. It was printed on my old printer that perhaps wasn't well calibrated, so if it doesn't fit please try the remixed version that's a little bit…
P
Printables
ORGANIZZATORE GT470
ORGANIZZATORE GT470 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
P
Printables
Lego Compatible (35470.dat) Plate 3 x 5 Cloud Shape with 3 Studs
This model is compatible with the lego system.
P
Printables
Lexus GX470 2D Wall Art
I designed a simple outline of the Lexus GX470 (Toyota Land Cruiser Prado) It is easily able to be hung on a wall, or can also stand alone on a flat surface