Liczymy pasujące modele…
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
A PSU Fan cover/silencer for the Creality Ender 3 Pro / Meanwell LRS-350-24 PSU This model was designed to print the models separately in different colors and fit the embossed letters into the debossed fan cover. If the embossed “GHOST”…
June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be attached to the front with 4 M3 screws. When using my chassis you…
V4 update (September 29, 2024): Removed the ugly circular overhang at the bottom Changed duct geometry for better airflow alignment Supports inside the ducts are no longer needed These toolhead covers allow to install a 5015 or 5020 part…
A mount for the first version of the Picostation, with direct access to the SD Card slot, bootsel button and activity led. The Picostation must use the feet provided, and seat in a slanted way. This allows for the SD Card to be accessible…
Modified from an existing design, fits with a 5mm x 3mm circular magnet. Glue needed by the way if you want the magnet to not fall off whenever you take finger rest off, since I made the hole to be 5.5mm wide. If you'd like it to fit with…
Print however you want to, my settings were pla .4mm nozzle with .15 layer height. The circular hole is designed to accept a 6mmx2mm magnet glued in place(there is a magnet in the mouse so really any small piece of metal glued there…
Simple Logitech G502 mouse pinky rest, no need to replace any original part. Simply attach it to the bottom mouse grooves with any mild adhesive, I used sticky putty, but double sided tape should work fine, the mouse and hand weight will…
This is the grill for my Unimog RC project ; the chassis is here and you can also browse my other models to find other UNIMOG accessories. Mounting is pretty straightforward; glue the black backgrounds (round one for the Mercedes star)…
So, you are like me and your Logitech G502 Hero and Lightspeed travels everywhere with you and you fear loosing the baseplate? Do not worry, luckily I still have mine and was able to model them, before they get lost. Now you can simply…
Public domain model of a Logitech G502 gaming mouse by heraSK . Originally uploaded to Blend Swap .
It was already a great design but made it a little better. ;) Maybe my hands are just large but my pinky, with the original design, kept dragging on the mouse mat. Made the pink rest larger and the small tabs that slide in the mouse…
remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…
Minimal supports are required for the section that connects to the usb slot in front of the mouse. Recommended to add mouse feet/skates on the bottom of the rest.
This print was created using the Rugged Box (Parametric) design by @Whity (thank you!). Designed for the Logitech G502 Lightspeed Wireless Mouse and to be fitted with the molded cardboard insert from the original box's packaging (see…
(old 2020 design imported from Thingiverse) This is not the common 5015 blower. This is a 5020 blower (squirrel-cage radial fan) with dual intakes and a much bigger outlet that is significantly quieter than the 5015 blowers. I've been…
This model is compatible with the lego system.
This is a different 5020 fan model than others posted here, hence posting my version. See e.g. this 5020 fan model . You can use this for in your own designs.
I designed and simulated this air duct to be mounted on the front of the BIQU H2 V2s Lite. There are 4 versions: 1: 5015 blower fan / no BL-Touch 2: 5015 blower fan / with BL-Touch mount 3: 5020 blower fan / no BL-Touch 4: 5020 blower fan…
Artillery X1 & X2 replacement - might fit Genius (not sure) For using 5020 blower fans. I used 5015 fans and they are all very loud so had this fan already and found it much better in every way. I can run it at 40-50% and it still quiet…
Я сделал этот апгрейд системы охлаждения материнской платы по одной причине - уменьшить шум в режиме простоя принтера. Меня не устраивали уже готовые решения, поскольку они рассчитаны на большие 120мм вентиляторы. Габариты очень большие.…
This is the base I have made as a replacement for the G502 Lightspeed. I had to replace the switches on my G502 so I took the opportunity to replace the base with a lightened one. The new base weighs in at 7g compared to the original 23.…
Models These models are for the G502 Proteus Spectrum (model from 2017). There are many revisions of the G502 mouse that are very similar in design, so there's no guarantee that this model will be compatible with your G502 mouse.…
Delta-P fan duct remix for a 5020 blower, compatible with the mk3s(+) You might need 2 longer m3 screws to hold the fan. Use .3mf for preconfigured settings
Uses same 6mm magnets as the original.
This case has two options for storing the mouse. You can store the mouse with the cable wrapped up and contained within the case or you can have the wire outside the case as well. To support my projects and to get commercial use, use the…
This is a Remix Of the 5015 version. I made it compatible for a 5020 Blower fan. You can also find a file to replace the Hotend fan by a 5020 blower. I also made a box for a PCB to regulate the PWM signal noise but it it is compatible…
Both are good mods, but there are something missing on each, so I mashed both together. My finger is slightly longer; my pinky drags on the surface. I printed this on a textured pei sheet, it works ok on my desk mat, didn't catch any of…
Uses the screws and spacers that came with the amplifier board kit. Steps to assemble: 1. First prepare the top part by fastening the spacers with 4 screws on it. 2. Place the board into the bottom of the enclosure 3. Slide the top part…
This is a simple stand I designed for my Behringer Q502USB mixer. Making things more accessible when placed on a desk. It will probably work great for similar ones like the 302 and 802 as well. Might also work with bigger ones like the…
This is a mounting plate that fits into the Jung LS 990 system. The fingerprint sensor R502-F (waterproof) can be inserted from behind and fixed with the clamp. The connection should be positioned downwards. The whole fits onto the Jung…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
A simple friction fit guard to help prevent accidental volume/channel changes during light everyday use. Cutouts on either side provide enough room to make small adjustments to volume and channel knobs without needing to remove the guard.…
Inspired by the Zeromouse from optimum, it weighs around 30-33 grams fully assembled and comes together in mere minutes, just 25% of the mass of the original G502 Hero. It takes 9 screws from the original body and has 4 clickable…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
ergonomic mouse grip
I love this modular case design and use it for lots of things. Recently upgraded my mouse and figured I'd make a case for it since I travel daily with it. The inserts are TPU and printed in gyroid infill (5-10%), with 0 top surfaces so…
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread. You can copy and edit the original file here:…
Hey there, made fitting mounting plates for the carpuride W502 screen - these mounts are compatible with this handlebar mount for quadlock:…
Como en otras ocasiones he dicho, no tengo conocimientos de diseño, pero he intentado mejorar este modelo reforzando una de las paredes que se me rompía cada vez que intentaba sacar los soportes de impresión, y he reajustado un tornillo…
I wasn't super happy with the options available so I just modeled my own. Forewarning, the thumb rest is pretty far forward, It fits my grip nicely. At the very least the skates, PCB and mounting locations are all accurate as a starting…
In the second version I removed the ugly step :)
Stand for a Philips BT5502 Bartschneider printed with an MK3s and DasFilament PLA
Not mantained anymore Switch to this model instead, which I made in CAD myself and it is easier to mantain and create newer versions (and you can also do it yourself because the step files are provided)…
Amp Box for ZK-502L amplifier board ( Link ). Came with some acrylic to screw it to that I did not like. Did a quick design for a mostly enclosed box. Board fits nicely in box. The screws that came with board are used to secure lid to…
5020 FAN https://pl.aliexpress.com/item/1005005075120773.html Enclosure for Sidewinder X4 Plus S1 – designed for mounting a 5020 turbo fan from AliExpress, which is quieter than the original fan. A side-mounted 3010 fan can also be…
Works with the listed mice to reduce scroll wheel weight. Remove the inner plastic piece from the metal outer of the stock scroll wheel. Remount the inner plastic piece to the printed outer. Hyperscroll should still work, albeit not for…
Remixed to fit a 5020 blower Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Unbranded ABS Yellow Notes: Print it at least on ABS, best on Polycarbonate Category: 3D…
Upon the request of another user I have created another cooling duct for the X2. However, this one is designed to use a single 5020 fan. I have used this on multiple prints but have not tested it against the stock cooling solution or…
Wasn't quite satisfied with the original flat version, so I made it curved; then I find the top corner uncomfortable, so I rotated the angles of lever end as well. Made 20 & 25mm versions, you don't want it to be too short since you're…
Gedruckt mit Stützen
Magnet diameter is 6mm Print without supports Reducing the flap height might further improve it
What is this? These printed parts let you install Prusa's MK4S 5020 blower part cooling fan shroud - a slightly modified version, that is - on the Sovol Planetary tool head “high flow” variant as shipped on the SV06 Plus and SV07 series.…
I recommend printing this on glass with hairspray for an extra smooth finish. It is imperative to the proper function of the mouse that the bottom cover is smooth. I've spent a lot of time tweaking the dimensions to get something that…
Thanks to phillip9933 on Reddit for the original design. Here's a link to that one: https://www.prusaprinters.org/prints/69954-logitech-g502-lightspeed-pinky-rest This is my remix of his pinky rest, extended for different grip types and…
Gridfinity Milwaukee Fastback 48-22-1502 Holder. There seem to be at least two sizes of Fastback utility knives. The other size wont fit properly in this case, so check your model number before printing.
This is a fan duct for use with a 5020 (50x50x20mm) blower fan, on a VORON 1.5 printer. To be used with the bracket from SIERRA086. https://www.thingiverse.com/thing:2044610 The model is fully reworked using Fusion 360's "Loft" and…
I wanted the rounded aesthetic of https://www.printables.com/model/294223-epson-115-ecotank-ink-holder but the 4 bottle holding of https://www.printables.com/model/284001-epson-502-ink-holder so I took those ideas and made this model in…
Hardware needed: 2x M3 x 12mm pan head screws (they need to be magnetic)…
单5020风扇完美解决4010风扇噪音问题，另一个风扇接头可以设计个辅助散热模块 不需要支撑
This is a simple ink bottle holder for the Epson 502 bottles that come with various models of Epson EcoTank printers. It holds 1 full set (4 bottles). Print Settings (Ender 5 Pro): Filament: Generic PLA Nozzle: 0.4mm Layer Height: 0.2mm…
Simple no nonsense surface flush mount plate. Will work for ZK-502 and ZK-1002 amps. I have provided a version for both the MT and T versions. ** Please note there are two amp versions! Check which model variant you have to be sure of…
This model is compatible with the lego system.
Update 20241101 : v2 added with an 4mm offset (so the fan hovers with a bit more clearance above the low profile PCIe devices) This is a simple top or front mount for a 92mm fan, for in use with a Silverstone RM400 and/or RM42-502 4U…
I made the 3D printed base for the Logitech G502 X LIGHTSPEED. The charging terminals and the receiver/dongle storage were removed. It fits without the modifitions to the original mouse. Maybe some light touchups will be needed on the 3D…
I currently haven't printed this, however i have printed the version its remixed from Filled in the holes, and moved it so that it can take 2 small screws which should stick to the mouse's built in magnets and will also act as the…
You need: 4x M3 brass thread inserts 4x M3x10 countersunk screws, holes are deeper and longer screws can also be used Printed mine in XPETG by extrudr. 0,15mm layer height for mount, 0,2mm layer height for clip Remixed one file I found on…
Stand for a Philips BT5502 Beard Trimmer
Lightweight shell (and mock-up PCBs) for wired version of G-502. Design is Work-in-Progress, but PCBs are done (to the best of my abilities). Feel free to download it for PCBs or to edit it to your liking.
Remix supports the wired version of the mouse, slides over the strain relief and fits snug. Like with the original can add some mouse feet or as I did 2 layers of electrical tape which works much the same.
A perfect box for your NEO 6502. Print and have fun. !Note: 3mf files are saved with bambu slicer profile and are MMU ready. They won't work in Prusa slicer. For Prusa slicer please use the provided STL files instead. Link to the git hub…
Halterung für eine LGB Decoder z.B.: -55020 -55021 -MD-Electronics Drive L -Massoth eMotion L
I used ASA filament for printing this clip. Maybe PETG works also fine. PLA is not suitable for this use case.
This replaces the stock 4010 Fan with a 5020 Blower. =>>> Significantly less noisy than the stock cooler <<<= Pushes more air, but be advised, noise level will increase. You'll need (2) M3x20 Flatheads with Nuts, or M4 heatset inserts +…
This model is fully compatible with X1, X1C, X1E, P1S and P1P printers. This model is fully compatible with the original BentoBox V2.0 filter. Easy installation. Use 12V (with buck converter) or 24V blower fans. 5015 and 5020 models…
Allows a 5020 blower fan to be mounted sideways for better sideways clearance.
This 3D model is still under development! ########################### Update 28.10.2025 Upgraded all models. There was an issue with Cartographer mount distance. ########################### Update 27.10.2025 A new model has been added -…
For years my LG Magic remote was broken. It's discontinued so I can't get another like it. So I designed this battery cover in Fusion 360. It was a very hard project and took many hours of time, and a dozen test prints, but I learned a…
I remix the 4020 Fan version of this part cooling to support a 5020 Fan instead, I also did some upgrades to increase its printability, by removing some overhangs and improving the cooling ring alignment. Blower: I am using it in my Ender…
Gridfinity storage for Logitech G502 X mouse with the slots to put in the extras, USB dongle, weight and the adapter
I love Gridfinity, and I also love to maximize storage space. I am not generally happy with rectangular bins to store stuff. A cutout shape ensures the right item returns to the right spot in the drawer. In this case, I was able to angle…
Updated on 09-02-24: Added models “Persano_Duct_for_the_CR6_SE_-_Base_V4” and “Persano_Duct_for_the_CR6_SE_-_Base_V4_stronger”, that has some minor improvements. The stronger one has a thin part below that helps the sides to not bend and…
UPDATED Oct 2025 with revision 1. Changes made to better fit the blower, especially the right side screw hole. Still not perfect, but improved significantly. Will update it again when the fit still being slightly off starts to bother me.…
This is the cooling inlet to Eva3 carriage platform to use one 5020 blower fan for a little more air flow then the single 5015 but without the weight of two 5015. But the real reason for this was that I realy like the look of this fan xD…
CARPURIDE W502 SET AVALIABLE AT https://cults3d.com/es/modelo-3d/artilugios/carpuride-w502-set It includes back flat plate for quadlock :)
Desinged for extending jobo 15xx reels for use with 70mm film Very useless, only for test. For nomal 70mm film is 15ft(4.6m), but 15xx reel can only handle 220 film (near 1.6m). T_T Print Settings Printer Brand: VoronDesign Printer:…
Simple dew shield. I covered the inside with velours.
Lever for floppy drive Chinon FZ-502. Used also in Atari XF-551 Floppy (360kB) Spare part.
The new version (v3) has longer slots to lower the duct for the H2 V2S REVO Tight fit. A bolt is not required Credit: https://www.printables.com/model/146957-mad-modular-air-duct-for-biqu-h2-h2-v2s-revo-h2-v2 Print Settings: 0.2mm Layer…
Use screws from base of mouse for mouse buttons.
Added space for a 6*3mm magnet, print at 1.2 and 15% infill, no glue just push fit All credit to fe|ix for modeling the baseplate all i did was add a hole :)
This was inspired by Biny's design (https://www.printables.com/model/294705-eva-3-cooling-inlet-for-5020-fan), but I created it using the original EVA 3 files. I liked the idea of a 5020 blower but wanted something less bulky and easier…
My adapter broke at the beginning of the heating season due to a stiff shaft. I replaced it with this print and so far it's working fine. Printed with ABS+ No support necessary. For bridging there is a disc at the bottom of the screw hole…
Print settings Add a support blocker to the top ⅔ of the model. The slice preview should look like the screenshot below:
ADDED V2 Added newer V2. Has small modifications and it is a bit shorter, but it will work the same as the other. I just wanted to make a better looking version and the end result is better with this one INTRODUCTION: I made this to…
This is a fan adapter for a 5020 fan for part cooling. For those that want a bit more cooling, but dont want to go CPAP just yet.. This fits on the VZ Printhead.
This is a rather simple from-scratch design of a EVA 3 inlet supporting dual 5020 fans. Use 4 M3 heat-set inserts: Two in the main body and two in the auxiliary fan spacer. Use 4 M3x25 bolts to screw the fans to the inlet and the spacer.…
I could not find an adapter for my shop vacuum to my WEN 6502 beltsander. This fits the port pretty tightly and works great. The included Fusion 360 file contains user parameters that can be adjusted to change the Input and Output…
This is a fan duct using 5020 blower fan I use with my SV06 adapted to use Volcano nozzle using melt zone extender and stock heater block. Use at least PETG to print this, ABS/ASA is recommended. You'll need: 24v 5020 blower fan using JST…
