Liczymy pasujące modele…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
Tow hook cover at the front as it is no longer available, a 3D part was made. not quite original but good enough. PETG printed.
Print any filament, 0.5 width and mount nvr. Cover2 for mount rtl8812au 150mw reciever. Drill holes for ant where you need.
Made up a wall mount for the 75367 UCS Venator, display the ship at 90 degrees rather then usual 45 degrees. (Due to available mounting space restrictions) Makes use of some of the technic pieces from the sets included stand, I also…
A friend was looking for a Vertial Wall Mount for a UCS Venator 75367. We couldnt find a public solution so I took took the measurements and created my own. Slicer Settings: Layer height: 0.2 Wall Loops: 6 Infill: 25% Overlap: 15%…
I used photos and time period docuemnts to replcate this ww2 radio. The image is of a different file but I don't have the printer to redo it. It should work the same though.
To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).
This model is compatible with the lego system.
WIP model of my NVR Case for use with OpenIPC FPV and Ground Stations. This case is a remix of W's case that he posted on the OpenIPC Telegram page. Thx for getting me started. This case features the following: 50x50x10mm 12v fan slot,…
The case is made for a cheap popular video surveillance board from Aliexpress (46х118mm 9CH NVR). To store the recording, I use an old solid-state hard drive without a case 65x42 mm. This model does not use screws. Assembly sequence:…
I designed these two 3536 brushless motor mounts specifically for an old Cessna 337 Skymaster ARF kit I never got around to finishing. This model was from Nitro Models which does not seem to sell airplanes anymore. I finally dusted it off…
This is an accu holder for the Worx Accu WA3536 Printed without support the way you can see in the picture replaced with version 2… fits better and is more stable
Remixed the excellent adapter - motor mount designed by pmstick to properly fit the D3536 Brushless 1450KV Motor (https://www.amazon.com/gp/product/B084Q62BSK/) in Tarmo5. The motor mount (pmstick design) and pinion (supplied with the…
This is a front bumper retainer for my 2000 WJ Jeep Grand Cherokee Limited. I'm assuming it is the same for all 1999 - 2004 WJ Jeep Grand Cherokees, and you can't really mistake this for any other body fastener I have seen. It is fully…
This model is compatible with the lego system.
When I bought my Samsung Jet 75 I got an extra battery pack with it. I create this holder so you can hang it on the wall and store the battery there. I printed it with 30% infill and I used the Prusa color change option for the orange…
This model is compatible with the lego system.
This model is compatible with the lego system.
IKEA KALERUM (305.536.50) Drill Guide – PAX Door Handle Template (256 mm) This 3D-printable drill guide is made for installing the IKEA KALERUM handle (305.536.50) on IKEA PAX doors with clean, repeatable results. It sets the two handle…
I usually use 3536 Outrunners ( eg.Turnigy ) so the Motor Mount provided with the 3Dsets Torq - Model 19 ( Hustle and Megnetic Pack) is to short. I exended both accordingly Printed in Prusament PETG 3 Perimeter 15% Infill - PRUSA MK4S
This model is compatible with the lego system.
Motor Mounts for the Turnigy Aerodrive SK3, 3536 size, 1400kV. Incorporates holes for the motor mounting screws. One is 90 Deg angle; the other has 7 Deg tilt off vertical. Print with the motor side (the side with the big hole) flat on…
Hinge Fix for Harbor Freight LED Work Light SKU: 59536 I have had a few of these lights and the hinges always break on them. Thankfully, this is a super fast and easy print (mine was 30 minutes for both sides!)! I printed this from ABS on…
Ich habe die Originalclips für die Halterung des Kühlergrills vom Audi 80 B3 nachgebaut. OEM 893853663A
This is a LEGO compatible file that works as an adapter to allow for the VEX 200mm Travel Omni-Directional Wheel to work with LEGO Technic Axles. There is a 4mm version and a 3mm version. The 4mm version will fit perfectly, and the 3mm…
Sport Cub S2 motor mount for Turnigy 3536 motor
Ich habe auch den Passenden Schlüsselanhänger dafür ;-)
These printables are add-ons to the model of SC-536 WWII radio made by Ted Cooper. It contains asymmetrically shaped press-to-talk switch button, more resebling the historical one, concave shaped micro/earphone lids more resebling the…
SCHÜCO 253655 with the corresponding pin for the door. Full kit The model is a bit simplified for easier printing and install. Should be even stronger, print with PET-G as minimum, 3 walls minimum, 30% infill Print the pin with support as…
ORGANIZER GT536 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Basic model of the generic lift pads you will see for Bendpak and Danmar lifts. May work for others. Designed to made out of a flexible material so it can be flexed over the metal pads to prevent them from falling off. PLEASE use the…
Didn't find a STEP file for the connectors, so I made one.
A simple Door Knob for our fridge ( IGNIS ARL536-LH ). Came without one so I made one with Fusion. I also uploaded the CAD-Files from Fusion360 for easy modifications if needed.
Box for HW-536 (USB DC-DC buck converter)
My friend made this… you might die of laughter! The original creator will remain hidden… while his creativity flows on the wide and vast internet, or in this case… pure dumbness and stupidity while making 3D models on tinkercad.
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
Wall mount bracket for the TechnoLine WT 536 or TechnoLine WT 538 Projection alarm clock with cable storage compartment. This bracket is used to mount the projection clock on a vertical surface in order to achieve the optimal position for…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
Ich habe auch den Passenden Schlüsselanhänger dafür ;-)
SCHÜCO 253655 with the corresponding pin for the door. Full kit The model is a bit simplified for easier printing and install. Should be even stronger, print with PET-G as minimum, 3 walls minimum, 30% infill Print the pin with support as…
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I've designed a stand for the glorious UCS LEGO Venator (75367), which holds the ship at a 45-degree angle to show more of this cruiser. The stand joints are fully LEGO compatible and fit perfectly for the original stand's designated…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
