Wyniki wyszukiwania: 6t

Veronica : 6th Station of the Cross

Veronica : 6th Station of the Cross calvary in Retz, Lower Austria. Made in 1727

OIT - 6ts freight yard crane (1-148)

Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- 6ts manual operated crane, as it was used on larger…

ipad 6th gen case 9.7-inch model

I've printed mine in PLA, it fits perfectly, looks clean & nice. Designed so that the cutouts on the sides follow the shape of the device, making it easer to reach the buttons. v2 is slightly thicker than v1.

Maximilian Spaulder (Shoulder Armor in the Early 16th Century Maximilian Style)

Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…

1/6th P51 Mustang Cockpit

This is the cockpit I built for a CARF Models P51 Mustang including the seat, left and right panels and the rear radio stack. It was built using a combination of FDM and RESIN 3D printed parts. The Exhaust stack and instrument panel will…

HexiBox Series: Dayton Audio DCS165-4 6.5" 6th Order Bandpass

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

2021 iPad mini case (6th generation)

2021 iPad mini case (6th generation) The night I purchased my iPad mini my puppy jumped into my lap to see what was in my hand and the iPad almost slipped through my fingers. After looking at cases online ranging from $20 to $60 (why…

Timberjack 240A - 1:16th Scale

Timberjack 240A - 1:16th Scale Holes will need to be drilled out for screws. These holes are marked with indents. Uses M4 and M2 screws. Uses M2 x 200mm Rods

MTB BASH RING / CHAIN GUARD 104BCD 32-34T & 36T

Chain ring guard for MBT/ATB cranks (Shimano/Sram etc) having 104BCD (bolt circle diameter). Mainly intended to protect your trousers getting dirty from the chain. Suitable for 32 to 34T chainrings. Works wel when converting from 2 or 3…

Inserts for Catan 6th Edition All-in-One Storage Solution

This 3D printable storage solution consolidates all components into the 6th Edition red box, saving space and streamlining setup and cleanup. Designed by me with Tinkercad, this organizer keeps your tiles, cards, ships, and player pieces…

Bottom Bracket Tool 44mm 16T for (Bafang, G510, Ultra)

Bottom Bracket Tool for Bafang mid-drive use a plier to tighten the nut ( size of the hex is 45mm) Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30-50% Filament:…

Perfectly Sized Sanding Block - 1/8th and 1/16th Sheet of Sandpaper

Update: Uploaded a new model of the 2.25 sander as well as new 1.125 sander. New models facilitate easier printing. A sanding block that perfectly fits a 1/8 sheet of 9x11in sand paper. Tear the sand paper sheet in half the short ways.…

90° Brake tube bending die for 4.75mm 3/16th brake tube for cars and bikes

Because I couldn't get consistent results I designed this easy to use die to bend the brake tube around. It works a treat! I've download other peoples files and I'm happy that I can pay back with a useful design of my own :) Here's the…

FCAS 6th generation fighter jet

6th GEN fighter mockup ripped from the wikipedia page. It's scaled and fixed to be printable. It wasn't made to be printed, good luck with finding good supports settings. The tail wings are one layer thick so very fragile.

4th generation Tacoma/6th gen 4Runner BIG cup holder MOLLE panel

Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…

MST - Bevel gear 36T

Bevel gear for rc model MST XXX-rally. Update: I made adjustments to the first version and tried with a brushless motor. Print instructions Infill 30% with support. I printing with nylon from fiberlogy. Temperature HB 110-115°C, HE…

16th birthday medal

16th birthday medal you can make for your son or daugter. Best printed with the color change function, see pictures. I used 4 colors, Prusament Galaxy-Black, Gentlements-Grey, Copper and Gold.

Helical Gears 45 degrees 36t + 12t, Lego compatible

Imported from my designs on Thingiverse. Original upload was 03.11.2019 (dd.mm.yyyy) Helical gears. These are 45 degrees. Resin printers are better than FDM to make the gears smooth. FDM will work but you have to do the instruction below…

Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale

***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…

The Codpiece - Accurate 16th Century Groin Armor

Although an April's Fools joke, this is still a wearable and fully functional knight's crotch armor design. This 3D printing file kit accurately matches 16th century codpieces from museums. An absolute masterpiece, I believe this is my…

Ariane 6 1/256th

The 9th of July, Europe regained its access to space with Ariane 6's launch! For this event I thought it would be nice for fans to be able to print a 1/256 Ariane 64 (sized to fill the entire height of a X1C). This is the most detailed…

Fireplace 1/6th scale for Barbie

This is a fireplace I made for my Barbie house. It's printed in separate pieces and I had to put it together on a 3D base I made of MDF. You could probably use cardboard as well. I used clay and stamps to make the inside portion and some…

Case International 4894 Tractor - 1:16th Scale

Case International 4894 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab

Dune imperium 5th/6th player pack.

There are numbers next to the model for how many of each you have to print. This assumes both the Rise of IX as well as Immortality expansions. A suggestion for playing with more than 4 players - how to get an extra starting deck? We put…

Chisel Plow - 14 Shank - Style 1 - 1:16th Scale

Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses

1/16th scale Euro Pallet

This is an accurate 1/16th scale model of a 1200x800 Euro Pallet. It is printed in 4 pcs (2 identical) and snaps together. (with slightly more force then you feel like you should apply😁) It is best printed with a 0.25mm nozzle, and 0.1mm…

Allis-Chalmers 7580 4WD - 1:16th Scale

Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws

Drift Wheels and tire combined and HEX for MJX Hyper Go 16th scale

Drift wheels and tire combined, its a very simple design, not made for looks, but to be functional, balanced and easy to print. Dimensions: Wheel+tire diameter - 70mm - smaller than the standard 80mm, for better throttle control and lower…

VEX V5 Compatible 36T High Strength Gear

Printed with an SLA machine so it might need to be reoriented for proper FDM printing.

GT2 16T Pulley - 3mm bore for 6mm belts

Remix to allow for using 6mm wide belts on 3mm motor shafts.

Versatile 935 4WD 1:16th Scale

Versatile 935 4WD 1:16th Scale Uses M1, M2, and M4 screws

6th Finger Prosthetic V1

A prosthetic to put on the end of your right hand to give you 6 fingers. Used inMoov pinky for finger. Print everything except “builtinring” with no supports. Use filament for the joints. Other items needed: Elastic bracelet cord Fishing…

Stalk Shredder Chopper - 1:16th Scale

Stalk Shredder Chopper - 1:16th Scale - Inspired by the John Deere 27 Stalk Shredder Uses M2 and M4 screws We used 3mm diameter Rivets to hold the tires on, but M3 Screws work too. Some areas that need holes drilled for screws have been…

Intel NUC 6th generation Desk / Wall mountplate

Simple NUC6 mount plate for under desk or wall mounting.

Toyota Celica 6th Gen wiper arm cover

Replacement wiper arm cover for the sixth gen Toyota Celica. Mine was never missing I just thought it seemed like something which could easily get lost. The fitment is pretty good, though not perfect, so might revisit it. The one…

16th Century Mughal Jali Pierced Screen Lamp

I was inspired by a 16th century Mughal jali (pierced window screen) on display at the New York Metropolitan Museum of Art . Thus, I replicated the 2 different Islamic Geometric Patterns into something easier to print and light up with a…

General Guan Yu on Horseback, 16th C CE

General Guan Yu on Horseback, 16th C CE, now in the collection of the Minneapolis Institute of Art. Testing out using Specularity UV textures as a displacement to add details to low poly models. The details on this may show up better on a…

Center Console Organizer for 6th Gen CR-V

Custom center console tray/insert/organizer for 6th generation Honda CR-V. Has space for small hand sanitizer bottle, credit/gift/loyalty cards, quarters, and a universal opening in the center. Has a nice friction fit with the center…

1/16th Scale Construction Site Rock Sifter

Here is a two-piece scale construction site rock sifter. Included are pictures of the sifter in use. I printed the base laying angled face down to the bed with minimal support on my Bambu Lab X1.

International 4366 4WD 1:16th Scale

International 4366 4WD 1:16th Scale Uses M2 and M4 Screws

Oliver 2655 4WD - 1:16th Scale

Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.

Manure Slurry Tank Wagon - 1:16th Scale

Manure Slurry Tank Wagon - 1:16th Scale Uses M4 & M2 Screws Certain holes will need drilled. Indents on parts show drill locations Two 6.4mm x 152.4mm (0.25in x 6.00in) rod for axles Needs rubber hose with 10mm Outer Diamater x 8mm Inner…

International 4586 4WD 1:16th Scale

International 4586 4WD 1:16th Scale Uses M2 and M4 screws

Simple iPod Case (Thick or Thin 5th, 6th, 7th, Gen Classic, Video)

3D model description Frame for Thin or Thick Model iPod models from 2005-2013 (5th 5.5 6th &7th Gen) included. YOU WILL NEED: 4x M3x16 or M3x17mm Screws (Thin) 4x M3x19mm or M3x20mm Screws (Thick) 4xm3 Nuts (acorn nuts give a finished…

2001-16T Custom Tornado Siren

This is a custom siren! It's a dual tone 2001 siren, the chopper port is a 4/6, but if it was a real siren it would be 8/12. You could print the chopper model with the ports separated and could be glued together, or the chopper model that…

Manure Spreader - Style 1 - 1:16th Scale

Manure Spreader - 1:16th Scale Uses M2 Screws and 6.4mm diameter x 138mm(1/4in diameter x 5-7/16in) rod for axle 1.75mm TPU can be used for hydraulic hoses

Traxxas 3953 Revo 3.3 Spur gear 36t mod 1

Traxxas 3953 Revo 3.3 Spur gear 36t mod 1 Mod: 1 Tooth : 36T Center Hole Diamter: 10.8mm Gear Thickness: 6.5mm Tooth Pressure Angle: 14.5 Video : This is Revo 3.3 converted to brushless Print Settings Printer Brand: Robo 3D Printer: R1…

Chisel Plow - 10 Shank - 1:16th Scale

Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses

5/16ths and m8 nut

These two nuts are actually really easy to print if your printer is well calibrated and they work great. I only had the opportunity to test the 5/16ths but I'm confident the m8 nut is good as well. They are totally standard dimensions and…

hpi spur gear 66t 48p

hpi spur gear for sport 3 chassis

Chisel Plow - 12 Shank - 1:16th Scale

Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses

Round Bale Feeder - 1:16th Scale

Round Bale Feeder - 1:16th Scale Real life dimensions: 8ft diameter x 4ft 3in height Print with tree supports for easier post processing.

Intek TQ81Bc Paper Shredder Replacement Compound Gear - First Stage 7T 36T Helical

Replacement compound gear for an Intek TQ81Bc paper shredder 7T Straight Press = 30-deg module = 1.61 36T helical, 15-degree Press = 20-deg module = 0.82 FreeCAD file included When printing, you could slice the bottom of the model at…

Case 2470 Tractor - 1:16th Scale

Case 2470 Tractor - 1:16th Scale Uses M4 & M2 Screws Uses Chunky Crab Planetary Rims and Tires (See other models from us)

White 4-210 1:16th Scale

White 4-210 Tractor 1:16 Scale Uses M4 & M2 Screws

Ariane 6 1:256th Lauch tower & Base

Stand with optionnal tower to print for my Ariane 6 model (1/256th scale)

Case 4890 - 1:16th Scale

Case 4890 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab

Configurable IPSC 1/6th scale Targets

These are 1/6th scale IPSC target models meant for use in your dryfiring training. Every model has within it several 6mmx2mm magnet pockets which allows you to easily configure your target to the presentation you want. The pockets are…

Apple A1521 6th Gen. Airport Extreme Base riser stand, wall mount, joiner

I designed this to raise the airport fan from being so close to desk and the scratching of the bottom of the Airport. A 2nd Airport also fits underneath if wanted to stack two or more. Put a rubber band around bottom of Airport to make…

MTB Chain guide for 36T chainring (Raymon ebike)

I have a Raymon Trailray e-Mtb, changing my chainring from 38T to 34T I needed a new chainguide because the original one leaves a big gap, so the chain could fall off while riding. Based on the old one I created a new one to be flush with…

3/4" Loc-Line to 1/4"-20 for Viltrox L116T LED Video Light

UPDATE 2025-10-20 - Another user has created what is probably a better model for this application. Mine cracked (after a good bit of use, but still). At some point, I was going to redesign it to be stronger (and I still might) but at…

Wishek - 18ft Offset Disk - 1:16th Scale

Wishek - 16ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 43 copies of 28in disk blades and 1 copy of 25in…

GEAR PINION 26T 3MM SHAFT MOTOR RC CAR CRAWLER

Gear for any universal 3mm shaft, this is lock tight version so its will permanantly attached make sure to use glue or locktite Onl y print with resin 3D PRINTING SETTINGS Standard type resin only, not suitable for water washable…

Watch Part Tray TR35-006T

Watch part tray with a 35mm Center. Based on traditional design. This has handles and indexing for safe stacking.

Chunky Crab Planetary Rim - 1:16th Scale

Chunky Crab Planetary Rim - 1:16th Scale Uses M2 and M4 screws Basic Chunky Crab Planetary Tire with several sizes of rims.

Surron Ultra Bee Chain Guide / Guard 56T

This is for sur-ron ultra bee chain guide once you change the rear sprocket to a bigger one you need to adjust or change the guide that why I create this. It is also integrated which you can change next time the skid of the chain only

iPod Nano 6th gen car vent (vertical) holder

Sixth generation iPod Nano holder ready to slide into the vertical ventilation grille in your car. Ready for power cable and headphone cable (for AUX input to the car). iPod is rotated towards the driver from the right side. iPod is…

Kui Xing (God of Literature), 16th C CE

Kui Xing (God of Literature), 16th C CE by Minneapolis Institute of Art is licensed under CC Attribution-NonCommercial-ShareAlike Fixed in Makeprintable. Minor changes to thin areas of statue. Added some poly as well then smoothed in MS…

Case 1470 Closed Station Tractor - 1:16th Scale

Case 1470 Closed Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles

Center console organizer for 6th generation Honda CRV Sport

This is a center console organizer for a 6th generation Honda CRV Sport. Includes honeycomb slots for pens, cables and other small items, three larger pockets, and a "trash can" that can be lined with a plastic grocery bag.

iPad Mini 6th Gen Arri 3/8 mounting plate.

IPad Mini 6th Gen simple mount with Arri 3/8" pin lock pack. The IPad is held in with slight overhangs on the frame and a small pring loaded clip that pushes into the top. I highly recommend running a 3/8-16" tap into the threaded holes…

Customizable 6th Finger/Toe Stylus

You can create a custom, 3D-printable capacitive stylus that can be used by individuals with limited hand control to interact with a smartphone or tablet. You'll need to install a free copy of OpenSCAD. Instructions at:…

Car Wars 6th Ed game organizer

Specifically for Car Wars Sixth Edition from Steve Jackson Games. http://www.warehouse23.com/products/car-wars-core-set A huge revamp of the classic 1980's hit game of cars and combat, this game delivers in a monster 29 cm by 29 cm box…

HardiePanel Sierra 8 4ft x 8ft x 5-16ths 1:12 Scale Model

You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…

Subaru Outback 6th Gen Fuse box cover

Subaru Outback 6th Gen Fuse box cover for adding addition buttons and switches. Feel free to leave your comments.

1/16th Scale Standard US Pallet

Standard US 4-way stringer pallet that is 1/16th scale. There are two different STL files you can download. One has the "planks" (deck boards) on the top and bottom of the pallet, the other STL file has the deck boards on the top only and…

HardiePanel Sierra 8 4ft x 8ft x 5-16ths 1:12 Scale Model Actual Texture

You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…

Guitar Buzz Tuner - Low E (6th string)

Concept Overview This is a simple mechanical tuner concept that's based on the resonance of a weighted cantilever element. The geometry is designed such that the tuner generates an audible “buzz” when excited by a specific frequency -…

6 Ts Puzzle - 6TP

Puzzle where six T-shaped pieces need to fit perfectly into a box. It’s a great brain teaser for puzzle lovers, with multiple possible solutions. Inspired by a wooden version, it's now designed for 3D printing. The simple concept makes it…

4th Gen Tacoma/6th Gen 4Runner Dash side cubby lid with Leatherman holder

Want to add a little pop of color inside your 4th generation Tacoma or 6th gen 4Runner? This model replaces the blanking plug covering the small dash cubby on the drivers side, have a little fun with your color choice and even a custom…

Remixed Inserts for Catan 6th edition and Seafarers Expansion(s)

Adjusted the tolerances of some of the slots, Added lids for the Chitlet holder and the player pieces, Reduced how deep

Catan piece box for 6th edition & sliding lid

Adjusted the model to fit the 6th Edition's slightly bigger roads and changed to a sliding lid as we found it more secure for vertical storage and careless handling! Prints without supports.

Offset Disk - 16ft - Style 1 - 1:16th Scale

Offset Disk - 16ft - Style 1 - 1:16th Scale Inspired by the Case International Harvester IH 770 Uses M2 and M3 screws Uses 3/16 inch (4.8mm) rod to attach blades to build. There are holes that need to be drilled out. These spots are…

EMCO Unimat lathe indexing and dividing plates (24T, 32T, 36T, 40T, 48T)

EMCO Unimat Lathe Indexing and Dividing Plates Used for operations such as gear cutting and other indexed machining tasks on the lathe or milling attachment. The indexing plates fit the Unimat DB/SL Lathe Indexing & Dividing Attachment…

Gridfinity bin for Wera 826T and Wera 816RA

I made a Gridfinity bin for a Wera 826T and 816RA. Bin size is 3x4x7 units. A 1 wide bin was slightly too narrow for either tool so I combined them in a 3 wide bin. Bin is stackable.

Autel MaxiSys MS906TS

VCI (OBD bluetooth) mount for AUTEL MaxiSys MS906TS, it might work for other AUTEL models but not sure. would be nice if you could post some photos after printing

Case 1200 Open Station Tractor - 1:16th Scale

Case 1200 Open Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles Recommended to print PTO with 0.2mm nozzle, or you can use an M2 screw in place of it

Wishek - 14ft Offset Disk - 1:16th Scale

Wishek - 14ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 32 copies of 28in disk blades and 1 copy of 25in…

Samsung Jet 75 battery holder (VS20T7536T5)

When I bought my Samsung Jet 75 I got an extra battery pack with it. I create this holder so you can hang it on the wall and store the battery there. I printed it with 30% infill and I used the Prusa color change option for the orange…

OnePlus 6T Backcover

This is a replacement back cover for the OnePlus 6T. If your glass back has shattered, you can use this model as a replacement. Instructions: Remove the camera lens from the broken glass back. Attach the lens to the new cover using…

6th Gen Celica Automatic Shifter Slider

This is a replacement part for the automatic shifter slider for a 1994-1999 Celica

Prusa MK4 y-idler holder for 16T idler

Als ich feststellte das bei meinem MK4 Probleme mit Wellen / VFA auftraten habe ich mich mit dem Thema befasst. Häufig sollen defekte Pulleys am Motor das Problem sein aber nachdem ich alles gegen original Gates Bauteile ausgetauscht…

6th Gen F150 Shift Linkage Bushing

This is the bushing for the interior automatic transmission shift linkage. The stock bushing has a tendency to disintegrate. This is easy to replace, the center console cover pops up, the shift linkage is right in front of the shift…

Sketching Board for iPad Pro 12.9 6th Generation

I created this board for my iPad Pro so I can sketch and sculpt on it. It uses simple dovetail joints to put the parts together. You may add glue if you want stronger bond between the parts but the dovetail should be okay for most uses.…

Round Bale - 1:16th Scale

Round Bale - 1:16th Scale Print with no supports and fuzzy skin. Real life dimensions: 5ft 8in diameter x 4ft 8in width

16T oval gear for Spirograph by 3Domas

This is a 16 tooth Oval gear for the Spirograph frame by 3Domas... and should fit the variants. It was a bit challenging to add an oval to a ring with such large teeth, but I got it to move smoothly without snagging and it does pretty…

Nalgene Bottle Adapter for 6th Gen Honda CR-V

This is a very simple cupholder adapter for the 6th Gen (2023-2025) Honda CR-V. I printed it in ASA, no supports needed. Update 11/30/24 - Resized the base of the adapter to help prevent wobbling while in the cupholder.

6th (sixth) Gen Camaro Center Console Storage (modular)

Made as a modular system to add storage to the Camaro's center console. I am willing to share the Solidworks files for additional configurations. It routes the cables upwards for a organized look. It uses M3 screws to hold the assembly…

Parametric coffee scoop - for Bialetti Venus 6tz

A scoop to fill my moka machine (Bialetti Venus 6tz) in one go with 90ml of ground coffee. The design is parametric - you can adjust the volume in the attached source file (in user parameters) I use it along with the funnel:…

SAE Gap Gauge 1/16ths