P
Printablesthall72
Lego Compatible (3713.dat) Technic Bush with Two Flanges
This model is compatible with the lego system.
- Pobrania
- 852
- Polubienia
- 62
- Ocena
- 0
Wyniki wyszukiwania: 713
Liczymy pasujące modele…
P
PrintablesFalk
Fensterdurchführung Klimaanlage für Velux Dachfenster zweiter Teil variabel 713-1000mm
Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Diesemal ist der Adapter variabel. Die Breite kann eingestellt werden zwischen 713-1000mm. Der…
- Pobrania
- 549
- Polubienia
- 34
- Ocena
- 4,5
P
Printablesthall72
Lego Compatible (67139.dat) Technic Connector Block 3 x 5 x 1 with Cutout
This model is compatible with the lego system.
- Pobrania
- 382
- Polubienia
- 56
- Ocena
- 0
P
PrintablesMouse
Roz (Rozzum Unit 7134)
Roz, from The Wild Robot. I printed Roz standing, 15% infill, Organic supports, Prusa MK4 .4mm IS. PLA works well.
- Pobrania
- 356
- Polubienia
- 22
- Ocena
- 5
P
Printablesthall72
Lego Compatible (71342.dat) Minifig Bugle
This model is compatible with the lego system.
- Pobrania
- 209
- Polubienia
- 45
- Ocena
- 5
P
Printablesjdegs
Ryobi Extended Vacuum Nozzle Customizable (Model P7131)
Inspired by thing:3802607, I believe there were some manifold errors (walls with zero and inconsistent thickness) in the prior model which is the reason for the redesign. Redesigned using OpenSCAD and Inkscape. The nozzle length is…
- Pobrania
- 130
- Polubienia
- 29
- Ocena
- 5
P
PrintablesStarGate01
Replacement for AEG Electrolux EA 150 Halter Siebträger (4071330916)
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine. https://www.massinger-ulm.de/epages/61366570.sf/de_DE/?ObjectPath=/Shops/61366570/Products/4071330916 The genuine spare part…
- Pobrania
- 118
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStawiamKlocki.pl
LEGO 75c19 / 47043 / 76257 Black Hose Rigid 3mm D. 19L 15.2cm for Star Wars Anakin's Podracer 7131
I bought incomplete LEGO 7131 Star Wars Anakin's Podracer - the only thing missing was Black Hose Rigid 3mm D. 19L 15.2cm 75c19 / 47043 / 76257 🔗 so quick Fusion360 project and it's done! Print tip! PLA is fine print 0,15mm in lower speed…
- Pobrania
- 110
- Polubienia
- 16
- Ocena
- 0
P
Printablesthall72
Lego Compatible (43713.dat) Wedge 6 x 4 Triple Curved Inverted
This model is compatible with the lego system.
- Pobrania
- 106
- Polubienia
- 28
- Ocena
- 0
P
Printablesbram17
Lego Compatible 5713.dat - Technic, Axle and Pin Connector Hub with 3L Axle
This model is compatible with the lego system.
- Pobrania
- 85
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGrant Emsley
Steam deck charger holder for Anker 713 Charger
This insert was inspired by some of the other steam deck charger holder such as the ones by Strider460 and MehStrongBadMeh , but designed completely from scratch for my second charger. It perfectly fits a US plug Anker 713 Nano II 45W…
- Pobrania
- 79
- Polubienia
- 17
- Ocena
- 0
P
Printablesthall72
Lego Compatible (27135.dat) Minifig Headgear Helmet SW Rebel Trooper (Cloud Car Pilot)
This model is compatible with the lego system.
- Pobrania
- 78
- Polubienia
- 13
- Ocena
- 0
P
Printablesbossgun5050
Impulse(12713) and Gigabots(19857) Odometery
This is my teams own custom Odometry that I designed to fit our robot perfectly, so I included the step file so you can edit it to fit your robot should you wish to do so. I 3d printed these but if y'all want to laser cut it that's also…
- Pobrania
- 70
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMAKERTEAM®
MT-SYSTEM Holder: Proxxon 27130 Hot Air Gun Holder (Proxxon Heissluftfönhalter)
This holder has especially been made for the small hobbyist hot air gun 27130 from Proxxon. The gun fits very well into the 45,5mm center hole which is slightly sloped to the user to get the gun out as easy as possible. Width: 60mm It is…
- Pobrania
- 65
- Polubienia
- 7
- Ocena
- 0
P
Printablesshopping-2
Cover für ENTRY sE-Key 7713 von Burg Waechter
Leider bricht mit der Zeit der Bügel des Transponders und man kann Ihn dann nur noch lose mitnehmen. Zum zusammebauen benötigt man noch 4 Schrauben M2 x 8 Unfortunately, the bracket of the transponder breaks over time and you can only…
- Pobrania
- 63
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarco Paganini
Ryobi ONE+ portable car vacuum (P7131) crevice cleaning nozzle
This nozzle fits in your Ryobi ONE+ P7131 car vacuum and allows you to clean crevices and other hard to reach places. It's particular useful to clean between seats in your car. I use it mostly to clean filament debris inside my 3D printer…
- Pobrania
- 58
- Polubienia
- 10
- Ocena
- 5
P
PrintablesBob
Elu 713 TGS 71 sawdust collection adapter
The inner diameter for the vacuum cleaner connection is 36mm. To mount the adapter to the saw, you have to drill two holes into the saw and cut a thread. I printed the adapter in PETG with 30% infill and a layer height of 0,25mm DRAFT on…
- Pobrania
- 50
- Polubienia
- 1
- Ocena
- 0
P
Printablesai maker
rozzum 7134
i loved the movie and i have seen models that arent to good, so i made this one to try to make it better
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBasementLAB
Stihl C26-2 TrimmerHead Eyelet Fits - Boccola Guida Filo - OEM 40027138307 -
Stihl C26-2 TrimmerHead Eye let Fits - Boccola Guida Filo - OEM 40027138307 - Mowing head AutoCut 26-2 Part Number 02640 Recommended filament: ASA - PA - PACF - ABS - PC COMPATIBILITY INFO: FS55 FS56 FS80 85 70 FS74 FS76 90 FS94 FS100…
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
PrintablesValerio
Supporto Scatola da incasso Vimar mod.V71303 ecc.
Incollare con colla a caldo o con Attak il supporto alla scatola. Si riutilizzano le viti e in 2 minuti si ripara la scatola in modo veloce e funzionale. Stampato in PLA Category: Electronics
- Pobrania
- 38
- Polubienia
- 9
- Ocena
- 0
P
PrintablesNodewave
STIHL Autocut 25-2 Mowing Head Eyelet Sleeve (repair part 4003 713 8301)
This eyelet sleeve is a repair part for the STIHL Autocut 25-2 trimmer/mowing head. Printing recommendations : Material : PC Blend or PC Carbon Fiber Print sheet: Satin or smooth PEI Printer Enclosure: recommended Nozzle : 0.4 mm Slicer :…
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCrooksUSA
Delta 713Maker Aluminum Rostock Effector Plate 3010 Part Cooling Blower Mount for Kossel
A part cooling fan mount and nozzle for the 713Maker ball cup effector plate using a 3010 blower. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 5
P
PrintablesMarco Paganini
Ryobi P7131 Car Vacuum wall mount/bracket
This is a simple yet useful bracket/wall mount for the Ryobi One+ P7131 car vacuum cleaner. It should also work on any other Ryobi tools that use the same female receiver (see pictures) as the P7131. I found a similar model somewhere else…
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 5
P
PrintablesPokédex.home
℗713 Avalugg Coaster 3D print
Printable 3D model. Avalugg coaster. Pokémon inspiration. STL file.
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJoe
Stand compatible to LEGO 71395 - Super Mario 64 Question Mark Block
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRob B
Corridor Board Game - 6713627
Original print by davemeeks Summary Board Game with the following rules: Objective: Be the first player to move your pawn to any of the nine squares opposite your starting side of the board. Setup: Each player starts with a pawn placed in…
- Pobrania
- 23
- Polubienia
- 9
- Ocena
- 0
P
Printablesnhprinter
John Deere Snow Blower Snap-In Bearing M137713
This is a quick and dirty replacement for a part on my snow blower. The original crumbled long ago, so this is not an exact copy of the part in question (M137713) but it works great. I installed it in seconds with a pair of pliers.
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCrooksUSA
Mechanical z-probe for 713Maker - SeeMeCNC Delta effector
This is a magnetic mounted z-probe using a mechanical end-stop switch. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector arms and their molded platform…
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAntherea
Ehemalige Katholische Kirche 35713 Hirzenhain Bahnhof
Das Modell der ehemalige Katholische Kirche Zum Heiligen Kreuz in Hirzenhain Bahnhof (Ortsteil von 35713 Eschenburg) ist das erste einer vorgesehenen Reihe von Modellen in absehbarer Zeit profanierter, umgebauter, umgewidmeter oder…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
Printablesvier2acht
Sanrenmu SRM 7130 Handles
You can use it with or without magnets. I designed the clips so they fit tight. With magnets is more secure but it should be fine without as well. Magnets 6x2mm:…
- Pobrania
- 17
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJim S
frame for https://www.thingiverse.com/thing:3107137
I designed this frame around https://www.thingiverse.com/thing:3107137 . It has a small hole for hanging. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Proto-Pasta pla Daffodil Notes: the…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 0
P
Printableszachnfine
raised Orbiter 2 mount and effector extension for 713maker Rostock effector plate
I designed these parts to switch my SeeMeCNC Rostock Max v2, with 713maker Rostock effector, over to using a direct-drive extruder. The parts are: Motor mount Adapts the Orbiter v2 extruder's mount to the effector plate. Also raises the…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSerpico
Yakima Baseline Foot 5022713
I designed this in SolidWorks to replace a missing Yakima Rack foot. it works perfectly. photos show original next to 3d print
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDexter Hawley
Rozzum-Unit-7134
I watched "The Wild Robot" a few weeks ago and loved it. I decided that I wanted to model my own "ROZZUM UNIT" based on photos from the DreamWorks website. While designing the model, I came to the conclusion that it would be more…
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTocache
Vivotek IP7135 enclosure
An enclosure for the bare mainboard of a Vivotek IP7135 IP Camera done on Autodesk Fusion 360 Print instructions Done using Autodesk Fusion 360, sliced using Slic3r PE and printer on a Prusa I3 MK3S printer on PLA material
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printables3d print boiiii
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 5
P
Printablesshinwachi
Flipper Spring retainer for Kenmore Refrigerator Model 795.71313.310
Flipper of Kenmore French door refrigerator (Model No. 795.71313.310) is prone to failure due to weak part (the failed plastic was lost but I think this may be better than gluing the shattered plastic back together). You can hot glue this…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJonas Wallen
Jafo Vattenlåsinsats rsk 7137020 Tool
Verktyg för att underlätta borttagning av Jafo Vattenlåsinsats rsk 7137020
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printableseight_heads
FT-5 OptiCooler for 713Maker Ultralight and Stock Hotend
This is a remix of printingotb 's OptiCooler for the Folger Tech FT-5. I am running the 713Maker Ultralight carrier with the stock MK9 hotend for now, but it may also work with the Titan Aero extruder. The fan bracket simply mounts to the…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNitro
EZABL Mount for FT5 - 713Maker
I used PLA with 75% infill. Edit - 2/7/23 I added a model for the right side that is a little close and I shrunk the height by 5mm. This time I printed with PETG.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSzwalkiewicz
Ft-6 713Maker V2
This is for a Ft-6 (maybe ft-5) with a Maker 713 Standard Carriage a 42BYGH40H-23D stepper motor and a Bondtech BMG-M with Mosquito hotend -moved the bltouch behind the hotend for better cooling with 30mm fan -moved the fan ducts for…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKen Spicer
Titan aqua mount for 713maker effector plate
Here's a E3D Titan aqua mount for 713maker effector plate I designed. This model can only be pulled off if your printer is particularly dimensionally accurate and is capable of bridging a circular gap. It's used on my ultibots D300VS+ but…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKen Spicer
BMG X2 + Cyclops Aqua + 713maker maker effector plate adapter for Rostock
This is a model to mount a Bondtech BMG X2 and E3D Cyclops+Aqua directly to a 713maker effector plate. This is one of the few dual direct extrusion methods available. Category: 3D Printer Accessories
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAndrew Rousseau
Motor run cap cover (YL-7134 motors on Craftex B2229 mill/lathe)
It was a difficult task finding new run capacitors for these motors that were the same size as the old ones. In the end I gave up and got a larger one and made this replacement cover. It's in three parts as you have to screw on the end…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesarminth
Reinforced feet for infectedfpv26's 15 Watt Laserengraver (Thing 3371373)
I have experienced that the original feet look good but break pretty easy when light force from above is applied which can easily happen while working on the floor on the machine. So I have made some more sturdy feet which can no problem…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablesbwaslo
(revised 9/2018) Cooler for FT-5 and 713maker.com Ultralight Aero extruder mount
(note! The stl for the "frame" (or cage) part has been updated to fix a reported problem with fitting at the top between the Ultralight mount's screws and the motor. With the revised "Frame.stl", no sanding should be needed now.) :)…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablesarminth
Mount with airassist 15 Watt Cronos Laser for LASER Engraver designed by infectedfpv26 (Thing 3371373)
Update as of December 29, 2021: corrected some mistakes, lowered focusholder and shifted buck converter up for more clearance to heatsink, sdapted measures for long laserholder to get better clearances added a little 3.5mm addon for the…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSzwalkiewicz
Ft-6 713Maker Tool head camera
Made to hold a micro Fpv camera on a 713maker Standard Carriage slots under stepper motor and is held in with stock 713maker screw I used the Runcam micro eagle because it's small/light and has a m12 lens I swaped it to a m12 f8.0mm for…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printableshorvaticus
Slim Rostock Max v3 Fan for 713Maker Mounts
After upgrading to the 713Maker mount ( http://713maker.com/mounts.html ) for my E3Dv6, I found that the original slim fan shroud was too small. I remixed Noircogi's design to be both longer so it'll reach the print area, and added a gap…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesmoosepilemini
Benchtop holder for POWERFIST 16 piece punch and chisel set 8547713
90x68mm footprint. Just a super simple square benchtop organizer No spot for the gauge cause we all know where that goes (powerfist is the house brand of a tool store called Princess Auto in Canada. It's our version of harbour freight)
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNickalbe
Roz - Rozzum Unit 7134
After reading the book with my class, I wanted to give each student a small robot to remember the wonderful adventure we experienced together.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablessohail AHMED
Brush roller cap for Hoover WindTunnel Rewind Upright Vacuum Cleaner, UH71330
A replacement cap for the brush roller
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRichard Rapid
Gama Panzer Model 713 - Kette
Ersatzteil aus TPU für die spröde Kette
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAndrew
Faceplate for POWERTEC On/Off Switch (71355)
The power switch on my Ridgid R4512 table saw stopped working, so I replaced it with the POWERTEC On/Off Switch (71355). This model is the housing/faceplate to replace the original Ridgid power switch housing. The screw holes are larger…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRekcik
Switch Symbol Shield (HELLA 9XT 713 compatible)
Symbol shield compatible with HELLA 6EH 007 832 switches. Print face down with a little support. Feel free to add your own symbol/icon.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMicah
Hemera/Hermes mount for FolgerTech FT5 and FT6 and 713 Maker carriage - WIth BLTouch
Pretty basic to print. Use supports to get screw head areas, obviously the big flat side down. I printed mine at 50% cubic infill for the best multidimensional bend resistance. This has been tested and works great. Category: 3D Printer…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Stand compatible to LEGO 71395 - Super Mario 64 Question Mark Block
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
P
Printables
Lego Compatible 5713.dat - Technic, Axle and Pin Connector Hub with 3L Axle
This model is compatible with the lego system.
P
Printables
Lego Compatible (43713.dat) Wedge 6 x 4 Triple Curved Inverted
This model is compatible with the lego system.
P
Printables
Delta 713Maker Aluminum Rostock Effector Plate 3010 Part Cooling Blower Mount for Kossel
A part cooling fan mount and nozzle for the 713Maker ball cup effector plate using a 3010 blower. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector…
P
Printables
Dust Port Adapter for DeWalt DWS713 Miter Saw
Adapts the 1.5" dust collection output on a DeWalt miter saw to a 2.5" dust collector hose. I printed with PETG, 15% fill, 4 perimeters. Print with support to plate only.
P
Printables
Skadis Holder for Wiha 71397 6 Piece Hex Insert Bit Set
Fits Wiha 71397 6 Piece Hex Insert Bit Set and probably other sets. Supports recommended on the overhangs.
P
Printables
Porsche Body Grommet Cone - Witches Hat - PAF008713
Porsche grommets used for interior trim pieces. This part replaces 99655585700, 971867972 and 996-555-857-00.
P
Printables
Ryobi P7131 Vacuum tool adapter
Adapter to fit some unknown brand central vacuum tool onto a Ryobi P7131.