Liczymy pasujące modele…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
This is a fully 3D Printed, ejection recovery system for 74mm model rocket fuselages. It consist of two parts, a tube (fuselage) adapter that connects the lower section to the top and also serves as the cap that will hold the shock coord…
Phillips Hue Switch Cover and adaptor for the V1 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Tool for opening and closing the oil filter cap on many VW, Mercedes-Benz, BMW, Audi and Opel engines. I have not yet been able to test the tool. But it should fit and work. If not, please leave feedback. thanks Printing PLA+ 40% - 50%…
Simple adapter to fit a Nardi wheel onto a Simucube/OSW/etc standard 70mm PCD base. Requires 6xM5 heated inserts to be fitted into the Nardi (non-recessed) holes. I used these heated inserts, M5x6x7OD size, but have also included the STEP…
I took blank version and enlarged labeling area to 13x74mm in order to fit 12mm label. Use case: you have Brother label maker and are obsessed with labeling stuff you dont need no letters printed on card you also think more wider means…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
spool adapter for winding filament onto Geetech plastic Spools with ~74mm ID. It's slightly undersized with the intention to add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printer Accessories
spool adapter for winding filament onto giant arm plastic Spools with ~74mm ID. It's slightly undersized with the intention to add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printer Accessories
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Drip tray made for small face cleaning sponge but can be used for everything. Diameter inside 74mm Insert needs to be printed without top and bottom shell layers. Infill only.
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Container and press fit lid with a knitted pattern style that is scalable down to 80% (see photo). Standard size is 74mm x 74mm (with lid). .stl & .3mf files available. Tip: remove any seams where the lid fits in the container to ensure a…
Model of the 9.3x74mmR Jagbüchse cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you want to add…
Hi Internet Virtual Hoonigans, Update My tester informed me of the 30 degree orientation change I needed to make on the model. This has been updated 17th Dec 2019. If you downloaded this as V1... download it again and it'll be right.…
I had to replace my power supply for my Prusa MINI and this print is for the aftermarket version that has different plug and wire positions. no support is required.
Outer Diiameter: 74mm Inner Diameter: 25mm Width: 59mm No support needed. only 60 gramm by 15% infill/2 perimeter
Hallo zusammen Habe hier eine Abdeckung für eine Bohrung, die mit einer 74mm Durchmesser Lochsäge gebohrt wurde. Gedruckt wurde die Abdeckung aus normalem PLA. Viel Spaß beim nachdrucken
I design this when i did some renovating at home, and adding plasterboard on the wall, the electrical switches dident fit so i added this ring and its perfect. You need lik 40-50mm M3 screws This is common i the Nordic countrys
Basic settings, works good with 0.2 default setting
Simple focus ring with 74mm inner ring diameter and a long extension arm for fine adjustment. An M3 screw and nut is used to tighten the ring. I use this for precise focusing on my DSLR negative scan rig.
One piece Centauri riser. 17mm high. 374mm x 368mm. Light cord hole in right rear. I printed it on a Elegoo Neptune 3 Max with a .8 nozzle. Sliced in Elegoo Slicer using the .32 profile. Just couldn't find what I wanted so I drew it. Any…
Suggested print settings: 0.2mm layer height 4 walls 5 top/bottom layers 40% gyroid infil
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Zaprojektowałem dwie wersje mocowania szpuli, jedna…
Lens hood with 74mm inner diameter, fits into the slots for this 35mm negative holder: https://www.thingiverse.com/thing:4620992/fileshttps://www.thingiverse.com/thing:4620992/files
L'inclinaison des trous d'aération permet d'éviter l'infiltration de l'eau en cas de pluie. Dans mon cas, cette aération sert pour l'arrivée d'air un poêle à bois. Convient pour un trou de diamètre 74mm.
Simple adapter that converts and offsets by 30 deg a 74mm PCD wheel to a 70mm quick release
Adapter for 7Xmm spools to the Eibos 3D Easdry X Filament Dryer. Adaptador para bobinas de filamento de 7Xmm para el Secador de filamentos de Eibos 3D Easdry X Apto para bobinas de filamento PRINTALOT. Print Settings Rafts: No Supports:…
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
Building a DIY battery bank requires precision and safety. These spacers are designed to securely hold 3.2V 120Ah LiFePO4 cells , ensuring they remain perfectly aligned for busbar installation while providing structural integrity to your…
Needed to mount an existing steering 74mm spaced wheel that i had in a 70mm QR hub, so i made this. You need to pause the print at Z=30 and install 6 M5 nuts on the holes, then resume the print. I think i printed this with 6 perimeters,…
I originally designed these scales because finding a replacement pen scale for the 74mm SAK line was nearly impossible. This project provides fully 3D-printable replacement scales that add a ton of utility to your knife. You can modify…
This model is made to fit Scalextric tracks, it goes underneath the track and stands it off the ground. Each stand took just under an hour to print. They are perfect for creating bridges. Hope you enjoy them. I used Black PLA to print.
my friend lost this part, asked me to draw and print it, posted it in case someone else loses it and wants to save $10 Category: Camera
modified the machine for 70mm cigarettes, also made a flexible tube from flex suitable for convenient rolling of a cigarette, I recommend printing it with a 0.4 nozzle with a layer height of 0.2mm, I used Flex from the Russian…
Collection of Gridfinity basic cups height 10 (74mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This is a thread that you can use to build projects based on the old 74mm NATO filter standard. Sometimes, you can find these filters on sale, such as:…
My wash bottles are not perfectly round so I went up to 74mm to give a little extra space. Also allows for bottom mounting. The corners started to warp a little for me, but didn't affect the fit.
Ideal for hold your hygrometer in the hole of your filament spool ( ⌀72mm > ⌀74mm). ( Hygrometer reference )
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
I wanted to display a plaque for my Holiday Light display that would allow a person that walked up to the display to easily read the plaque. I had a piece of PVC pipe with a 3" inside diameter (ID) in the garage so I decided to use that.…
Die Gewindestange lässt sich senkrecht gut ohne Supports drucken.
Add holes for 6x74mm to the already existing 6x70mm holes on the Moza Quick Release.
This is a remix from another maker, I cannot find the source from where i got this. only need the outer sleeve to which you choose which stand. Also will need 3 small screws M3*6 (#4 x 1/4" long) flat head self tapping wood screws.
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
Needed a Spacer or adapter to adapt my microscope focus ring form 76mm to 74mm or microscope form 74mm to 76mm I know it is simple LOL but it worked.
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
My wheel didn't come with a cap so it bothered me to see the bear podium behind it. Quickly modeled a cap to use the remaining 3 screws in the middle to solve this. Meant to be printed with .2 layer height, in the position provided. Play…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Since upscaling the 60mm centering disc results in too big centering hole for the spool axle i quickly modeled this disc suitable for 74mm spools such like GIANTARM or GEETECH
Quick draft to try out the idea. The opening is very slightly flared internally to grip the lip of the can. I printed in TPU 95A with 0.28 layers and it fits just right. We're using several of these now, and I found 101% scale works even…
Tromba reflex per subwoofer DIY , progettata per condotti da 74 mm di diametro interno e 78 mm di diametro esterno alla flangia. Ideale per progetti audio in bass reflex, sia per subwoofer che per casse a due o tre vie. Questo modello è…
!Not well tested! Donate if you're pleased with my work i'll appreciate it! Every donated buck will be spended for printing materials and hardware.
I upgraded my laser tube in my cutter to 100w which is 80mm and I needed to raise my mirror mounts. Here is a 74mm mirror mount with through holes for M4 threaded rod to hold the mirror tight and flat. Category: Tools
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This is a 74mm model rocket body tube adapter . It connects 2 (74mm) x cardboard body tubes. It is designed to be used with body tubes like this ones: Apogee - 74mm x 18" Body Tube (Thin Wall 3" tube) It is meant to substitute 3" Tube…
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a 74mm Model Rocket . It connects 2 (74mm) x cardboard body tubes and holds the battery and the BLIP PCB Board in place. It is designed to be used with…
This is a adapter for attaching a 140mm pc fan to a 74mm tube. I used it for a wind simulation in my racing setup. Printed with a 0.6 nozzle and 0.35 layer height. (I will add pictures of the print later)
Plastic u-channel edge protectors that allow cardboard, glass, art and other things to have protected edges. Rounded corners cover the u-channels for a finished look. These were developed to fix a childs miniature whiteboard, but have…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Phillips Hue Switch Cover and adaptor for the V2 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
Just a quick remix of the original design with a slightly bigger deameter for the flex hose.
![[Without AirTag] MacBook (Pro) - 67w (74mm x 28.5mm) power adapter cable spool](https://media.printables.com/media/prints/1a98f3f8-ebb7-424d-a0d1-ceffe5394130/images/10136203_7c457afe-4bce-4f1f-a606-e2a34d4d18bb_25c13927-7063-4029-9f77-d9cd57cfbad3/2025-07-01_12h22_36.png)
