Liczymy pasujące modele…
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
Remix of @MM7VXJ's remix of SurfinBirdmans's rails for the Yaesu FT-857/FT-857D in Armoloq's style which adds: Expansion holes M4 nut-ready. You can attach whatever you want, You can use my optional connector with these connector pannels…
Malá poklice přes šrouby.Já tiskl na dvě části 16,5mm řez, část 0.1 mm ABS a vnějšek 0,2 díl : 7D0 601 149 A
The original part is made out of PA6 GF15 but feel free to test possible alternatives. I would use at least PETG or ASA.
An adaptation of ‘SurfinBirdmans’ rails for the Yaesu-857 which adds a 5cm extension to the rear of the radio to provide more space for cable management, useful if being stored vertically in a backpack.
I've created is as 2 independent pieces which can be splited before printing to avoid huge support. Only small supports are advised for small ribs on bottom surface which should be printed upside down. Top part should be also printed…
An 11B4 Mouthpiece in two variants: beautiful (with decorations) and functional (simpler and thicker, more resistant). I recommend printing it backbore side down (cup side up) in order to obtain a smoother rim. This will make the print…
Boeing CH-47D-F Chinook Wall Art SIlhouette model. Adjustable size. I accept model suggestions.
This is a trigger guard for the Ryobi P737D 18V inflator. Found it'd get triggered sometimes when I'd toss it in my trunk when going biking. Printed in two pieces to increase the strength of the parts. Can attach with a single screw, but…
This model is compatible with the lego system.
Please note that these models are untested and are based on replacement parts which I acquired. You may have to adjust this model to get it to work. A very common problem with used Yaesu FT-857D ham radios is that the Select knob is…
27 Deg kicks 2mm Concave 58mm wheelbase
Hi Guys, I Designed some desktop stands that slide over the 737DIYSIM.com MCP Unit. Printed with 30% infill.
Its a super simple print, it will fit on the build plate of an Ender 3 so it should be fine on most printers. Just be careful when removing the nose, the propshaft is delicate.
This is a small pill despenser for seven days of a week. Two round neodym magnets 8x3mm (diameter x height) are used to hold the axis of the turnable cover. The magnets have to be inserted during a printing pause e.g. using the…
This is an adapter that converts a DELL monitor stand into a VESA stand. Compatible with stands labeled “FFT-ZS”. Please let me know if you can use this model other than those listed below. UP2516D UP2716D U2717D Print setting Layer…
Arachne generator 3 walls
I needed a support for my 7.1 Audio sound card in my virtual pinball. I could not find one so I made that version.
A set of 3D printable dashboard covers / blanks compatible with VW T4 Transporter, Multivan, Caravelle, Doca, Syncro , designed as a replacement for part 7D0 858 179 / 7D0858179 . These parts are commonly missing, broken, or modified over…
This is a great idea by Lamima , but that design was a little too short for my EOS 7D, so this is tweaked slightly. May be a snugger fit. Also incorporates a cutout to allow the pop-up flash to be used without removing the cover. Made…
Just a simple remix of Bele2009's excellent mount that adds retention tabs to keep it from sliding out front to back when mounted in a different orientation.
This is a stand for mcp/efis boxes … the brackets on top to secure the efis boxes to the mcp won't work on the standard design i flipped the right hand box so the usb cable was on the other side and i don't think i can redistribute that…
Wall mount for the P737D Ryobi Inflator. Angle of the arms allow storage upside down and will keep it in place.
I know this is a really popular project, and when I was building it, I needed something to hold the faceplate/backplate so I could work on it, and solder the wires, etc. These really helped but was the very first thing i ever made in…
Small retainer to tidy up the cable on the Shure SM7B and SM7dB microphones. > 10 min print using PLA Infill set to 75%
Ryobi P737D Inflator Trigger Guard uses existing screw holes on the side of the inflator. The original screws are not M3 machine screws but two M3 x 25mm machine screws work perfectly for this modification. Printed with Inland PETG on…
A few model iterations included, hopefully this can serve as inspiration or a good starting point for future project ideas.
This holds 3 nozzles on top of the Quick 957DW+ hot air rework station. It reuses the screws and mounting holes that are already on the case – no new hardware required. I printed in PETG, 0.2mm layer height, 10% infill. I printed it on…
Yamaha bocchino cornetta penna corta Standard 7D4D in allegato anche il progetto su fusion 360
Print instr. same as nadirs ID 18.5mm ----------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)
This model was made out of desperation, there are no publicly available models online and the real part is almost $100. There is on creator selling a similar model but they want $20 which in my opinion is highway robbery for something…
937D Soldering Station Organizer for tips, solder, and wicks. I just hot glued mine down, you could use real glue as well. Category: Tool Holders & Boxes
Der Kurbelwellendichtring beim N47D20D Motor hat keinen axialen Sitz. Der Wellendichtring könnte somit zu tief oder zu weit herausragen installiert werden. Im Extremfall könnte er nach innen in das Kurbelgehäuse gelangen. Mit diesem…
A holder for the extra nozzles and a top-mounted rest for the tool.
Jensen JC7DM There is a version specific to the Jensen JC7DM. It attaches to the slide mount that comes with the unit. This version prints nicely without supports. Generic I made the other version for my dad to use a suction cup mount.…
This is a fairly long shot that anyone is going to need this… The tripod is about 18 years old and no longer sold by 7dayshop.com (but it may have been a cheap import so may be other similar tripods out there). But I needed a second plate…
Fachzeichnen Arbeitsplanung Metall Grundstufe - Spannblock HuT017D
This is a replacement battery cover for a Commodore 797D calculator. I created this replacement part from scratch since the original cover was missing, thus i tried my best by studying various photo's to get it to match the original…
Durable cover for mks servo 57d driver. You just need 4x M3 16mm screws :)
To keep the nozzles together with the hotair gun in a way I can easily move it from the storage shelf to my desk and back without taking additional space I designed a holder to keep them under the normal hotair gun holder on the right…
SKY TOPPOWER HD-937D 60W Soldering Station with digital display: https://www.amazon.com.au/60W-Soldering-Station-Solder-Electronic/dp/B0BN1BG11V May work for the B version, untested as I don't own it but it looks identical.…
Thumbsticks for Hubsan H107D Transmitter Print Settings Rafts: Doesn't Matter Supports: Yes Infill: 100% Notes: Print sideways for strength Category: R/C Vehicles
A 1x3x7 Gridfinity container for the 3 hose attachments (3mm, 6mm, 8mm) for the Quick 957D
Adapter Plate for a Servo Gyro, or another addon you like to place. You can use the Fusion 360 file for different sizes. You need 2 cable ties (< 3mm width) to tighten the thing.
The sharp edges annoyed me so I made a TPU frame. Printed in 98A FLEX. It's for the both sizes I know of the larger 5dB and the smaller 6.7dB. If you like my designs please consider donating a coffee or any amount really, I appreciate the…
A specialized holder designed for the CYBRES phytosensor system, engineered to mount sensors securely onto plant stems and branches. Features a multi-pivot 7DoF articulated design for precise position control without placing damaging…
Although I have not tried them, the hole versions use less filament and should be just as good if not better due to ventilation. If I had to pick one again before printing I would use the triangle version as that minimizes overhangs.…
SKY TOPPOWER HD-937D 60W Soldering Station with digital display: https://www.amazon.com.au/60W-Soldering-Station-Solder-Electronic/dp/B0BN1BG11V May work for the B version, untested as I don't own it but it looks identical.…
Small retainer to tidy up the cable on the Shure SM7B and SM7dB microphones. > 10 min print using PLA Infill set to 75%
An 11B4 Mouthpiece in two variants: beautiful (with decorations) and functional (simpler and thicker, more resistant). I recommend printing it backbore side down (cup side up) in order to obtain a smoother rim. This will make the print…
This model is compatible with the lego system.
Very simple model. Printed with glow-in-the-dark PETG for flexibility and visibility. Snug fit that does not fall off, so no further retainers are necessary. Practical for outdoor operations, only around 6-7g extra weight.
2x 7day pill box with rolling shutter lid. Super easy print. No supports or glue needed. =) The box is robust with strong 5mm walls and therefore can be used on travels. It holds your pills for the day and the night in the shown separate…
Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 100 Filament brand: Inland Filament material: PETG Notes: I always use a brim when printing.
This is a replica of the classic figure D from the Heritage Miniatures Dungeon Dwellers blister pack number 1297, "Dwarves". (see…
Updated ATU-100 case for genuine N7DCC Designed style of boards. The original design doen't have enough room for the boards with the genuine Red Toroid inductors' I have also updated the rear cover to take to more popular (and more widely…
Support solder air Quick 857DW+ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: НИТ PET-G Black Notes: Speed 50mm/s Category: Machine Tools
great for those cases when you need to free your hands and at the same time the soldering dryer does not cool down Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament:…
Robust wall mount designed to hold Makita DF457D cordless drill. It's a bit overkill, but I wanted something that is hard to break and witohut risk of easily knocking drill out of holder. Rough 3D scan was used to copy the shape of the…
Project on GitHub Display 128X64 I2C SSD1306 DC Power Jack 5.5 x 2.1mm Print instructions Front and Back I printed with ABS plastic. Bottom and Top I printed with PETG plastic.
Replacement legs for the DELL RT7D50 keyboard however it can't be used on most other revisions due to a slightly differing design.
Hi all, this is a simple and compact case for the fantastic ATU100 antenna tuner kindly made open source by N7DDC. I've provided two versions, for different antenna connector diameters, but also all source files so you can tweak to your…
