Liczymy pasujące modele…
I liked Jonathan's design, and it fits my Mitutoyo calliper well, though upside down. This turns it over (right way up) with a slightly higher box at 7U and provides for a wider range of callipers. (My digital ones didn't fit the long…
The base model is great for things that fit tightly or are short, but thinner or taller things didn't work quite so well. Simple change, increase the depth of the holes.
Prints with no supports needed, and looks great on a textured bed in matte filament. A case for the INBN0BV1287UD VFD module. The case is a single-piece print with a recessed bezel for the VFD glass and a friction-fit pocket that grips…
This is rambros ' excellent EMD GP7 model for Dragon Railway , remixed into a GP7u and with an ORHS 471 livery. ORHS 471 is an EMD GP7u owned by the Orrville Railroad Heritage Society of Orrville, Ohio. It started life in 1950 as MEC 571,…
This is a cable holder that will rest on the handle of your performance case with part of it fitting into the gap of the handle. The insert piece is optional but provides a place to store knurlies, picks, and other odds-and-ends. If you…
This is a wall mount that uses double sided tape to mount a stand for your phone using the Belkin Wireless Charger F7U05 I have an Iphone 13 it works with it I Have to take off the case but i think its just the case. used 20% infill and I…
Die Halterung wurde für ein Monitornetzteil von einem LG Display (27UP850-W) entwofren und ist für die Montage unter einem Tisch gedacht. Die Schrauben fixieren das Netzteil sicher, es kann dennoch leicht entnommen werden. Das Netzteil…
The caps are quite similar, but have a slight difference in the font and in the inscription around the circle. Also, I did not make holes for the screws, you can drill them yourselfthe caps are quite similar, but have a slight difference…
Update: Higher position and further away from screen for less bleed on screen. Since the back base of the monitor is thick the original mount won't hold on it without this adapter. It is a snug fit on the monitor, so the adapter plate…
Remixed the design to 7U in height to fit the power adapter inside the module and maintain stackability with other Gridfinity units.
The Ocktron MD is a 3D printable medium sized home lab rack, perfect for projects up to 7U height(12.25 inches). Engineered with our new Frame 2.0 with easy paint design , less screws, ergonomic handlebars, art-deco style and functional…
This is a 3D-printable case for creating a mechanical keyboard with an HHKB layout, with a split backspace and blockers. It is compatible with most 60% PCBs, but specifically I have assembled with with the XD60 and DZ60 soldered PCBs.…
I liked Jonathan's design, and it fits my Mitutoyo calliper well, though upside down. This turns it over (right way up) with a slightly higher box at 7U and provides for a wider range of callipers. (My digital ones didn't fit the long…
The base model is great for things that fit tightly or are short, but thinner or taller things didn't work quite so well. Simple change, increase the depth of the holes.
I designed myself a mini 10" rack to fit inside an IKEA KALLAX compartment. I paused the print before the top layers and filled the infill with steel beads, in heindsight I dont feel like this was necesarry but it helps with stability The…
Background on the TeensyMaestro The TeensyMaestro is a custom-built hardware controller first designed by Len (KD0RC) to interface with FlexRadio transceivers - specifically models in the 6000 and 8000 series. It performs some, but not…
Prints with no supports needed, and looks great on a textured bed in matte filament. A case for the INBN0BV1287UD VFD module. The case is a single-piece print with a recessed bezel for the VFD glass and a friction-fit pocket that grips…
How it works Two wedges grip the monitor from the sides (left & right) and hold it securely at a 15° tilt (leaning backward). The design provides an ergonomic viewing angle without additional brackets or screws. Same design for both…
With this model you can build a cheap and nice-ish looking rack that's also more flexible than off the shelf alternatives with fixed width. You'll need an Ikea EKET (25 or 35cm depth, your choice) and 4x 6U or 7U posts (eg…
These are 7U rails to replace the original 5U rails. I have also included the new side panels. For those the just want to add 2U i included some extensions.
I printed out this Mount for my Asus Monitor and im happy with it. it works. Metal stand should hold minimum 8 kg screen. Print instructions I printed out with support.
Headphone Holder remix so it fit my Asus PB27UQ screen better. Decreased depth, length and the radius of the inside fillet. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 20…
Box pro 3 HDD ORICO 2577U3-BK-BP Externí box pro 2,5" disky, max. kapacita 2 TB, USB 3.0, USB-B a Micro USB B 3.2 Gen 1
Holder to attach iPhone to LG monitor (27UN880), the iPhone works as Continuity Camera during video calls.
3D modeled to fit and mount Roland electronic drum modules that use MDP-7U mounts. This includes TD-10, TD-20 and more. PETG is recommended for printing! I recommend supports for the underside. I have many drum parts available for sale,…
Eurorack Modular Synth 7U Stand This object was designed on request for a friend, Brett. The idea is simply to raise and tilt his modular synth setup. The model is simple 2 pieces, a front and back connected via M5x20 screws/nuts, which…
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
Designed with the LG 27UL550 monitor and the iPhone 14 Pro or iPhone 15 Pro Max dimensions in mind. I print this on its side (the longest side on the Z axis) so that it doesn't require supports.
Mounting plate for PoKeys 57U CNC controller. This is to make mounting in a metal cabinet easier and removes the risk of anything shorting the back of the board. The holes are sized for 4 x 3.5mm M3 brass inserts. I printed in PLA, 30%…
A simple phone stand that should fit most mobile phones and integrates the wireless Belkin charger F7U054. Print instructions Printed in PETG, 0,2mm, supports & brim.
Used the parametrized power brick model from @jodoll_223877 to create a version fitting the LG monitor power brick.
GPS mount of Walksnail GPS and ViFly GPS backpack for the AOS 7 UL.
If you are using silencing rings mod on your Realforce 87U, the whole action is moved down a little. At about 0.5mm thickness of the rings, some keys (especially the longer ones, like enter or shift) may begin to touch the plate when…
