Liczymy pasujące modele…
The badge on my E91 looked terrible and I've decided to design and print a replacement, because this is what people with 3D printers do, right? This badge has a diameter of 82mm and is designed to replace the hood badge of a BMW E90 , I…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
I recently purchased a well-used camera lens which came with a lens cap that was missing the springs on one side. Seeing as I own a 3D printer and have access to the internet, that should be a not-really-a-problem that is easy to solve. I…
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
For my filament box I wanted to have a spool roller with following features: Shall save space in the filament box. Enable easy replacement of filament spool. Shall work for 1kg spools with ⌀200mm. Shall be robust and avoid jumping out of…
Lid with Labeling for Jars and Pickle Jars This lid is specifically designed for Twist-Off 82mm jars and is perfect for storing dry foods such as rice, pasta, nuts, lentils, and similar pantry items. Please note that the lid is not…
Model of a Soviet 82 mm mine on a scale of 1:1. Stabilizers are printed separately and glued.
Simple and effective ventilation grille.
This strainer has been design to be sturdy and to filter smaller element than the main strainers. The gaps are about 2mm wide, which keep a goood water flow while filtering. Can be scaled up/down to fit your sink drain. All other…
This is a remox for slightly longer drives, 182mm. Resized it to fit my Pioneer BD-R S08 Blu-Ray recorder.
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small…
Attention! The coil consists of two parts! Update: ESUN made new spool with diameter 76mm. Added v2 version It is too expensive to print adapters. The adapter should provide excellent clamping of the side faces, I will try to come up with…
Simple drill template for 2 sockets, 71mm distance, cirkel at 82mm. (aftekenmal) I would like to see how other people made and use this for themselfs, a ‘make’ would be very nice. Thank you.
Honeycomb storage wall section that i cut off a few hexagons and now it is 88mm X 82mm so that it can fit on smaller print bed sizes. Please post a make if you made it!
82 MM for Trunk and Bonnet Logo. Be a part of Bimmer On Budget squad!
Filamentive introduced a new spool core. This is significantly smaller than the original refill spool. Printed in PETG at 0.2mm layer height.
While I was sitting with artificial intelligence, I wanted to use it to invent a fruit fly trap. The task was clear - it had to be as effective as possible. And it also had to fit into an 82mm jar (pickles). I modeled the cone to the lid…
publishing this for a friend.
I designed these to vent my router table vacuum cupboard. Just drill an 82mm hole in your surface with a hole saw, and pop these in. There are 3 screw holes if you want to fix them in place. See them installed here;…
Adapter for stock Holder
This mount makes it easy to put up your model and take it off without getting stuck. Note: Please print sideways for maximum strength.
if you want to add a logo or something, you can use any CAD program. the easiest is probably TinkerCAD but if you have any local CAD programs (Fusion360, AutoCAD, SolidWorks, Rhinoceros3D) those will probably give you a better result. I…
While the Original required a cardboard core this remix is made to work without a Cardboard core. I also optimised the model in terms of vertix count and material used. The inner diameter of the adapter is supposed to be ~82mm while the…
AstroSolar filter & mask holder for camera thread 82mm
(Google translated) The arrow stand is 220x200x82mm, for 8x8 arrows (64). The holes get larger and larger, from 6.7mm, 7.7mm and 8.6mm. Fits my ID 4.2, 5.2, 6.2 carbon arrows from min.1000 to 500 spine. The distance between the holes is…
Wanted a way to stow away camera lens caps instead of just stuffing it in my pockets, yet I do not use a camera strap and so the existing solutions do not work for me. Instead of a clip I decided with a loop, which has the added benefit…
hex perforated kilner jar lid 82mm
It should fit any milk container/bottle that is up to 82mm. The tolerance is 0.5mm. So it’s 82.5mm. If using abs maybe set the shrink to 99.7%.
I printed at 0.15mm in PLA Pro to test, and it works perfectly with my cheap Tilta matte box and 50mm DZO Vespid2. The threads are a little tight the first time. I plan to reprint in PA612-CF for actual use. I don't plan to make…
Introducing the "82mm Antilock Filter Washer" - the ultimate solution to safeguard your precious camera lenses from filter-related mishaps. Designed to address the common issue of filters getting stuck onto lenses. This ensures filters…
Lens cap mount for 45mm wide Peak strap. The mount has a 10° chamfer to make the cap sit very firm. I shaked the holder hard with the 77mm cap mounted and it wouldn't come loose. UPDATE 08.05.2026 - Added an model with space for 82mm cap
This is a support for fitting smaller downlights in a pre-existing hole, the insert is added to the upper side of the hole and is glued or taped in place, it allows plaster to be added in the gap between the existing ceiling and the part…
Insert pro Machi Koro od MindOk - velikost krabičky 113*182mm.
Printed in black PETG with supports for the inside overhang. Ideal for drilling holes for electrical outlets without creating a lot of airborne dust particles. So far still holding up great after 17 holes.
Adapter C-tech Refill (82mm paper) to Prusament (95mm plastic)
Lightweight grommet for use in 8mm plywood and 83mm sized holesaw
Red dot finder adapter for 82mm bino. Probably it will work with other ATM like binos.
Threaded parts that can be used to clamp Master Spool components to a refill spool of AzureFilm filament. The cores fit the new refill spools (82 mm) and have a centre hole of 54mm so it fits onto the standard spool holder of the Core One…
Designed in response to AvE's clear view attempt I dont have a printer so have not been able to test yet. Parts 14 m6 1 counter sunk screws 82mm uv filter 1/4 npt hose for air line. 6mm airsoft bbs for ball bearings Custom Section…
This is a 2 part design, simply print the 3mf file twice and insert 12 3x6mm Magnets. The case fits all round Filters up to 82mm diameter and 6mm thickness which should cover most fixed filters. I also attached a .Step File for easy…
Material: PETG Infill: 40% Layers: 5 walls
Description DISCLAIMER : This model is only for display and educational purposes. It does not contain any explosives and can not be modified into doing so. This a display model and can not be modified to be used as a real projectile!!…
Wanted a way to stow away camera lens caps instead of just stuffing it in my pockets, yet I do not use a camera strap and so the existing solutions do not work for me. Instead of a clip I decided with a loop, which has the added benefit…
Description DISCLAIMER : This model is only for display and educational purposes. It does not contain any explosives and can not be modified into doing so. This a display model and can not be modified to be used as a real projectile!!…
I made this pen holder grommet for my old IKEA Effektiv desk that has an uncommon 84mm hole. It replaces the original holder that had too small a pass-thru for all my wires. This new one has a larger opening. It is about 65mm deep. I…
Added spurs on side to enable easy twist opening. Reduced dia by 0.5mm I also have one with my logo but please use the standard one. This remix wouldn't be possible without the step file provided by the original designer. I thank him for…
I needed a place to store the cap whilst shooting and didn't find an adjustable solution so I made my own. It's attached using a 1/4 UNC screw and adjustable to fit lens caps (or filters) from 49-82mm. When adjusting the screw needs to be…
These are step-up rings designed to cover a range of lens fronts to work with the Camera Lens Mounted Teleprompter . It can be a pain to find your specific set of matching sizes for maybe only one specific use case – in this case, to…
First of all, this is limited right now to one size range, as it was requested and not too difficult to resolve. I’m including the STEP file, but for the threads you’ll want to refer to this config file . Pitch of .75, which is most common.
This is a remix of sarky_marky's light switch cover 4128200 but reduced to an 82mm square version to fit my light switch. My switch has a slight chamfer to it so the original design overhung the front of the switch faceplate.…
Having trouble removing a filter or extension ring? This tool will help. Use a strong filament like PETG or ABS to print. You can resize the model to accommodate the specific ring you need to remove.
Two lens cap holders I printed using the remixed parametric design. The lens caps are for my Sony 20mm f1.8 G lens, Tamron 28-200, and Sony 55mm f1.8 Zeiss. The second (triple) lens cap is for a friend who has a Sony GM 24-70 GM I, Sony…
Very easy to print adapter for most cardboard spools. The length between the 2 Flanges is 65mm (i just looked into my spools and found 1 wider one) Rotates effortlessly. Thread is pretty loose (because it does not have to withstand ANY…
Annular gauges for measuring the diameter of cylindrical objects. Gauges are 16mm tall and 4mm thick. Sizes range from 20mm to 29.82mm inner radius. These are part of a set. For similar ring gauges in different sizes, use this search .
Annular gauges for measuring the diameter of cylindrical objects. Gauges are 32mm tall and 4mm thick. 10mm to 19.96mm. These are part of a set. For similar ring gauges in different sizes, use this search .
Annular gauges for measuring the diameter of cylindrical objects. Gauges are 16mm tall and 4mm thick. Sizes range from 30mm to 39.82mm inner radius. These are part of a set. For similar ring gauges in different sizes, use this search .
Annular gauges for measuring the diameter of cylindrical objects. Gauges are 16mm tall and 4mm thick. Sizes range from 40mm to 49.82mm inner radius. These are part of a set. For similar ring gauges in different sizes, use this search .
