Liczymy pasujące modele…
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Material: PET-G Layer high: 0.2mm Perimeters: 4 (5 for connector) Infill: 30% Cubic Holes for connectors are blind because of reliable printing. Drill them by 5-5,5mm drill. Big square is modifier - you can set bottom layers to 0, it…
Fixed solid holes on mount Please refer to https://www.printables.com/model/631300-tweaked-cable-chain-mounts-for-elegoo-neptune-4 for additonal parts. I only created to fix the missing holes on the mount.
Needs: - two extra M5 (minimum 15mm long) screws for the frame attachment. - four M5 5mm long heat set inserts for connecting adapter and holder. - four M5 8mm long screws for connecting adapter and holder. The original file has been…
Uses the original screws to attach the original spool holder to the adapter. Needs two extra M5 (minimum 15mm long) screws for the frame attachment. All holes have a diameter that enables screwing the screws directly, or using a tap…
Why? Using the Core One's rear M3 142x66 bolt pattern, I lofted that profile to a simple cylinder for 3” & 4” hose. I wanted to keep it as tight as possible to the back of the Core One, and point it vertically (90deg). For those of you…
General Description: It is possible to eat pedigree, to burn yourself third-degree and to get an academic degree, however when it comes to the well known 3d printed functional arm mounting system, at some point you get out of degrees and…
Our pump has a higher GPH output than what came with the pool and I wanted to make the path a uniform cross-section throughout. Only major change was making the elbow outlet hole round and using a radiused, 90deg bend. Update: Had to…
I had already uploaded this thing to my MyMiniFactory account after I found the cover by tcurdt which had inspired me to design this cable cover to begin with. So even though this is not technically a remix, credit where credit is due for…
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
Neptune 4 Pro extruder 90deg with chain female mirrored to connect your Extruder with the chain. Infill 100% No suppor
I needed a 90deg diverter for the exhaust vent on the enclosure. Uses the existing port screwed into this diverter. Material: PLA Supports: Yes Additional Parts: M4 x 8mm (used 4 of these to secure existing exhaust port)
Installation instructions is identical as provided by Prusa at : https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946#362491 If there are any hurdles or request, please feel free to reach out in comment or direct…
Hope you enjoy my fidget toy that can be also used as keychain. Tip. A drop of glue on the top cap would help secure it forever :D If you like my models don't forget to follow me Enjoy!
Convert your Irwin quick-grip clamp for use on corners, be that picture frames cut at 45deg or 2 x square cut planks. Simply remove the standard rubber clamp boots and slide on the precision-fit clamp ends. It's made to fit tight but can…
45/90deg railway diamond crossing track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK…
Ich nutze zur Befestigung M6 x 16 (Linsenkopf ISO 7380), da ich das Jig an dem Systainer befestige, verschraube ich das Jig von hinten und benötige den Platz. Siehe meine andern Makes. I use M6 x 16 (lens head ISO 7380) for attachment,…
Customized version of https://www.thingiverse.com/thing:62800 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=62800 Instructions Using the following options: gopro_primary_kind = triple…
Basic 90° small switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT other…
Plants naturally prioritize upward growth due to the action of the hormone auxin, resulting in apical dominance. However, by bending the apical bud 90 degrees downward, auxin redistribution occurs within the plant, stimulating the growth…
I got a new set of shelves that put the space near my window at a premium. Since the hoses for my AC unit (Hisense brand) didn't quite have the bend radius necessary to make that corner, I had to model something up to bridge the gap. And…
Hello everyone! I'm bad at modeling! I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant. For 8mm bearings, 3oz / 85g Super…
One thing to notice is that when mounting to 4mm holes there is limited access to one side (where curvature of duct direct airflow), therefore it is only possible to add M4 nuts from the sides.
Designed like my Core One version, this is a more rugged vent to mount on the back of your Centauri carbon. Unlike the Core Ones nice bolt pattern on the back, the Centauri Carbon has a wonky 3 bolt design for mounting, which poses a…
use 1 M4x12 tap m4 in the hole for easy mount If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0,24 Infill: 30%…
PVC Pipe Joint 135degx90degx27mm-OSE I'm using off the shelf 90degx90degx27mm corner joints and PVC pipe to make a frame covered in a home made tent skin to create an indoor cubby house for my grandkids, but I could not get…
A 90 degree 1/64 Diecast Car Track, now setup to use traditional connectors - printable in PLA or PETG PRINT SETTINGS PETG - 0.18 layer height on 0.6 (or 0.4) nozzle, 15% gyroid infill, 2-3 walls, 2-3 top layers, IRONING ON ALL TOP…
PVC Pipe Joint 112.5x90x27mm-OSE I'm using off the shelf 90degx90degx27mm corner joints and PVC pipe to make a frame covered in a home made tent skin to create an indoor cubby house for my grandkids, but I could not get 135degx90degx27mm…
I am building a V1E Low Rider 4, but had to make the table.... let's call it "my way" which is to say overdone. Local scrap yard had a bunch of unistrut and instead of welding i wanted to 3d print brackets to hold square but allow for…
It is a simple tool for 90deg edge sanding. I was inspired by Festool AH-ES-ETS/ETSC Sometimes is difficult to make flat 90deg edge - especialy when the board is thin. This tool set 90deg and avoid to change flat edge to concave shape. I…
[UPDATE Nov 2, 2023] .stp file added per request. I've had a lot of good/positive feedback from my X2 remix of the Delta P duct by @teookie . And a few users have requested a BEAR extruder version, so here it is. Versions: Version with…
A simple 90 degree cold-shoe adapter for using an external light-meter. To easy the readings on my external light-meter, allowing me to keep the camera on the same orientation.
version 3: Just a slice from my other model, many small improvements, now grabs the cam at the base so you can adjust focus in mounted position. Adding some silver tape to the inside of the "light guide" improves it drastically. old:…
No soldering, check the pics to see how to modify the ground connector, .step is also attached- feel free to modify This is my first shared design - let me know what you think It took a while to design so if you like this design please…
This model is a remix of the model from @VomDeich Hardware required: M8x100 - Hexagon head bolt with partial thread M8 Wing nut
90 degree bend for osVAC. Print both parts as shown in the screenshot. The female connector with the slip ring should rotate freely right after printing without any problems. Assemble both pieces, should be a tight fit. I secured the…
I just added an vertical output zu my exhaust, because bending the floppy air exhaust tube is not working good, and may block the very important hot exhaust air. Printed in PETG, PLA would most likely melt, its like at 60Celsius hot air…
Simple clip that is a tight fit on MY usb plug and adds support onto the back of the Steam Deck. Obviously, rotate it in your slicer to make the long flat side the base. FreeCAD file is included for anyone to mess with for their purposes.…
Bracket for generic 4545 extruded profiles like Bosch Rexroth (or printed profiles for less loaded applications)
Have you ever wanted to have LAN cabel from RJ45 to 90degrees? Now you can.
Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…
This tool is for marking the miter for a 90 deg 3/4" bullnose drywall edge. The tool will mark right hand or left hand miters as needed. There are two versions. One with relieved corners and the other without, so you can cut excess corner…
mounts the AD5M screen flat against the frame instead of at a angle
Here is a 90deg bracket for shelving. I used these on wooden 2"x2"s and they worked great. No Support, 20%infill
a holder for the old Festool Systainer, I used double sided tape, I drilled two holes through the top holes and fixed it from the inside with a thumbscrew Please don't forget to “Like” the model. / Bitte vergiss nicht das Modell zu “Liken”.
Rotated clamp 90 degree. Will require upright printing configuration and supports for top of clamp.
This adapter redirect Prusa Core One's exhaust 90deg upward, connecting to 100mm inner-diameter hose. The hose connection point is leveled with top panel of Core One, for ease of connecting/disconnecting from the front. Install It…
Exactly what I was looking for so I don't spend too much time on this :) Thanks Lemaru for the great fit with the wyze cam foot. Took the original stl in Fusion and added the 90degree bracket with screw holes to it. I posted the STL, F3d…
This is a new version of my old adapter which is rotated by 90deg. It is a bit less balanced (didn't notice a change however) over the extrusion, but it doesn't limit the X and Z axis as the original did so you can use your full build…
It was printed in PETG with 100% infill. After installation, it is important to balance the hinge so the doors do not slam at the end of the movement. Based on part number 20K7AX1 Hinge number 20k2e01.02
Needed an attachment to the rear outlet of my P1S to adapt to my magnetic fume extraction system but couldn't find any existing design that encompassed my needs. Remixed two existing designs and incorporated my own magnet layout so that I…
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
The 50x50x50mm (2 inch cubed) angle bracket, also see the other dimensions Category: DIY best strength in PETG infill 25% Please like ! Feel free to donate. enjoy !
Axial SCX 10 mods
I remixed the zip tie mount because I wanted to personalize my printer and the original pieces connection goes on and off so nicely so it just makes sense. I found a slight issue and the letters are 90 degrees out of rotation, goes to…
Rotating the spool holder is genius and in my 3D printer location allowed for a small over head shelf to be cleared and my printer to be located closed to the wall, saving room and shelf space!
For connecting two 100mm Flat Channel ducts at a 90 Degree angle
The Deskhaus Apex Pro Max has a cross bar preventing the chain from mounting on the inside of the back leg, and some tops on it might not make it possible to mount it on the outside, or the desk position might be such that mounting it on…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
Simple Nema 17 motor mount for 90deg mounting on a plate it needs to be strong infill use CUBE Extra on Cura overlay for less infill on the motorside the Freecad file can be edited to your needs in Distance Have fun
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
Useful to mount a cable gland at a right angle, I used this to seal solar connections on the roof of my van. Requires silicone to adhere and seal but once it cures it has been perfectly watertight. Designed for 16mm (M16) cable gland but…
With the new tvOS you can use your iPhone as a Continuity camera for FaceTime. For this I wanted a short, landscape-mode stand that I could use to hold my phone on the console under my TV. This stand won't fit a charger, it's designed to…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Small drill and screw guide 90degree. Pomůcka pro kolmé vrtání malých průměrů.
Pomůcka pro kolmé vrtání. Large drill and screw guide 90degree.
This allows you to mount a tablet or similar things to your wall. Rotation Tablet can be slided in and rotated 90 degree clockwise. If you rotate it, the tablet is locked and can not be pushed upwards. You need to rotate the tablet…
This is a remix of https://www.printables.com/model/1233888-prusa-core-one-rear-ventilation-mount-3in-4in-hose for the Core ONE L - currently just the 3inch / DN80 / 80mm variant. Printing: PLA works fine 0.4mm nozzle @0.2mm layer height…
This print ensures that the right-angle SMA connector does not rotate on its own.
modle is for wooden curtain rail (90degree angle)
Curved reversible train track piece, compatible with standard wooden style tracks. Female-to-male configuration, 90 degrees, radius 100mm from center.
120mm fan to 90mm in a 90 degree bend adapter for enclosure. 120mm to 85mm 90degree. Smaller diameter for HVAC piping to slip over and clamp onto adapter.
DIP8 90deg Right Angle Op-Amp Adapter I designed this adapter because I wanted to fit a Burson V7 discrete op-amp inside my Fosi Audio ZD3 , where there isn't enough vertical clearance to install it normally. The adapter rotates a…
Hope you enjoy my fidget toy that can be also used as keychain. Tip. A drop of glue on the top cap would help secure it forever :D If you like my models don't forget to follow me Enjoy!
Designed like my Core One version, this is a more rugged vent to mount on the back of your Centauri carbon. Unlike the Core Ones nice bolt pattern on the back, the Centauri Carbon has a wonky 3 bolt design for mounting, which poses a…
This model is a remix of the model from @VomDeich Hardware required: M8x100 - Hexagon head bolt with partial thread M8 Wing nut
mounts the AD5M screen flat against the frame instead of at a angle
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Useful to mount a cable gland at a right angle, I used this to seal solar connections on the roof of my van. Requires silicone to adhere and seal but once it cures it has been perfectly watertight. Designed for 16mm (M16) cable gland but…
a holder for the old Festool Systainer, I used double sided tape, I drilled two holes through the top holes and fixed it from the inside with a thumbscrew Please don't forget to “Like” the model. / Bitte vergiss nicht das Modell zu “Liken”.
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
Stand to rotate an Echo Show 8 Gen 1 to 90 degrees. It may fit other Echo Show models, but just in case I clarify that the measurements were taken from my Show 8 Gen 1. It is made in OnShape so anyone can easily adapt it to other…
Especially useful for Voron Trident back Z rail. It allows to place the rail right up to the T intersection (as in the picture) instead of 12mm lower and still prevent your linear rail carriage from falling out.
This cable-housing standoff anchors to the frame with a 6mm bolt and holds a 5mm housing at 90 off at a small distance. Clips onto the housing with mild force. If more holding force is needed, a small zip-tie can secure it.
Designed for PASG 30 B3, but could work with other lights mounted with a single M6 screw. Printed using PETG and 25% infill. Additional parts: 2x M5 30mm screws (any longer will also work)
magnetic saw guide used effectively to cut trim and other materials. uses 20mm magnets. Magnets can be mounted with adhesives or the provided mechanical clip. works best with Japanese flush trim style saws.
Description This is a spacer for the Philips Hue Ensis which allows you to route the cable out of the middle. Choose the version you need : 90 degree or 180 degree There are integrated tunnels for zip ties. I needed to split it in three…
Low profile Exhaust adapter for Prusa Core One with 90 degrees orientation and 75mm pipe adapter.
This model turns the Prusa MINI heatbed cable cover 90degrees and allows cable connection by zip tie.
90 degree strain relief for Creality CR-10s Pro bed. I created this to save a little space so the printer can fit on my desk without hanging to far off the front. Lay flat on build surface and can be printer with no support. I used PETG…
I took dumle29's otherwise excellent design and modified it a little. I made some indents for the nuts, cut off some height and made a chamfer on an edge. Thins makes the entire thing a bit more streamlined and easier to mount :-) I mixed…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j5Yw5kGMlrp Category: 3D Printing
Delta Fan Duct for Prusa Mini MK3S Bear: Sherpa Mini + Revo Voron with the flow split rotated 90deg. You should print the fan duct in a temperature resistant filament such as ASA/ABS, etc. PETG might also work. This remix is based on:…
The 1.5U original Keycap is faulty. This is a fixed version. The underside is not as pretty but servicable.
So I needed to connect something to the wall, always handy to have some brackets in the toolbox. Printed in PETG, 25% infill Please like and return you comments. Category: DIY
Customized version of https://www.thingiverse.com/thing:3007147 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3007147 Instructions Using the following options: extrusion_width = 40 side_length = 30…
The 30x30x30 mm angle bracket, best strength in PETG. enjoy ! Category: DIY
![#0039 [Remix] X2 Delta P Duct (MK3S+) for BEAR Extruder [New 90Deg Flow Splitter]](https://media.printables.com/media/prints/312180/images/2710296_b61d40c0-026a-420a-8038-01310ab2bd9c/x2-delta-p-for-bear.jpg)
![OEM Creality DD Gantry & Creality Dual Gear Extruder adapter [90deg version] for Hero Me Gen 5](https://media.printables.com/media/prints/60879/images/638716_95971f11-8f06-450b-bb1f-1a6d9b90dff6/large_display_adapter_90deg_v15_60879.png)
![Prusa Mini MK3S Bear: Sherpa Mini + Revo Voron - Delta Fan Duct [Flow split rotated 90deg]](https://media.printables.com/media/prints/228430/images/2081346_11522d48-2224-4d9a-9d7d-bd4bdafd56a5/delta-p-duct-r2v2-flow-split-rotated-90deg.png)
