Liczymy pasujące modele…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
I accidentally threw my AM3 brackets away so printed this as a replacement. I used a PETG version to attach an Aerocool Core Plus to an M4A88T-M/USB3 motherboard and it worked well. Also, crank up your infill/perimeters/shells to give it…
Very minimal supports are needed for the mounting bracket. This is optimized to save space on the wall. It also has storage in the rear. You can store the lead cables there.
I wanted to make as small case as possible, so all headers must be removed from the ESP DevKit V1 board in order to fit it in. Optionally AM312 PIR mount can be mounted with two #6-32 screws. Enclosure can also host mmWave Radar mounted…
This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…
This is a multimeter I designed specifically to hold my AstroAI AM33D multimeter. It is inspired by Coat's Multimeter case and I've also used several of the smaller parts from his file along with the “multimeter” word cutout, thus the…
first of all, I have to thank @m2rechtin_272754 for the brilliant gearbox design https://www.printables.com/model/202734-801-nema-17-planetary-gearbox The model I am fondly sharing, is designed to assist in the polar alignment of ZWO am3…
I use a couple of AM312 hooked onto one sonoff basic. Instead of bringing the Sonoff close to the place needed, I decided to make a stand alone enlosure for just the AM312 motion sensor. This is the one I use:…
This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and…
Since an Alienware laptop has failed me it was time to switch back to self-build computers where I can repair/swap defective components myself. After the MMX video editing hell I knew I needed some more digital horsepower's and decided to…
I've been using a variation of this case on the MK3 but it is for a PiCam2. When I upgraded to PiCam3's I realized the case this is based on (https://www.thingiverse.com/thing:2956323) does not work, so I remodeled it. Requires an M3x16mm…
An old AM3+ Motherboard CPU cooler bracket has broken. I designed a new one and you can print without support! I Recoomended to print from normal PETG (PETG HF has lower temperatur resistent) or ABS or ASA. The standing orientation is…
Simple camera mount for the A1. The supplied adapter will handle the Wyze Cam v3. Simple print then slide the parts together and the camera into adapter (upside down). Then slide onto the end of the filament cut trigger on the right side…
Gridfinity - AstroAI AM330 Multimeter Stand Holder for AstroAI AM330 Multimeter Fusion365 Fusion 360 File included for easy remixing Other Models Check out my other models https://www.printables.com/@Micah_754861 Category: Organization
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
Box for 20 CPUs on sockets: AM2 AM3 mPGA754 mPGA939 FM1 FM2 FR5 and more 40x40mm CPUs
This is a pegboard holder for the AstroAI AM33D Multimeter. It doesn't get much use, so I put a cradle for the 9V as well to avoid battery corrosion. It also has spots for the contacts as well as the small screw for the battery…
Box for four AA batteries. I tried other battery boxes but they tended to need a rubber band to hold them together in an overnight bag. This has a sliding lid that grips all round so should be secure. Just enough room for most types to…
This is a simple 3D printed bracket designed to upcycle old AMD stock CPU coolers. I've tested it on an AM3 stock CPU cooler but it may be compatible with others also. It requires two M3 screws to bolt the “AM3 Cooler Catch” to the “AM3…
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor. Sensor gets mounted with a single M2 - M3 screw and nut while the switchplate gets screwed into the wall using 4 tiny wood screws around M3. The hole this mounts…
Corsair H100i AMD CPU socket adapter. AM3 & AM4 *use Intel hardware for mounting (thumb-nuts, standoffs and screws) 28OCT18- Updated the design to allow for the Corsair Link cable to be plugged into the pump...my earlier revision did not…
AM32 ESC Mount for the Wet Biscuit
A holder for AstroAI AM33D Multimeter with optional accessory forks compatible with DDD Printable Wall Control System. Two versions are available: a 2x deep holder without accessory forks and another 3x deep with forks to hold probes and…
This is a bracket mount for the DHT22 temperature and humidity sensor. double sided tape can be used on the bottom or there’s a relief for a round magnet (12x2mm magnet size).
All parts separated so you can utilize Cura's 'Print one at a time' feature, and for general convenience Category: Household
This mount has a section for the Multimeter itself, the two cable ends and a space for the batteries so they don't passively drain when not in use for extended periods. Two mounting options are available - either via command strip via the…
Inlay is design by myself The monkeys comes from thingiverse from Cathy29 make sure the inlay is fitting - measure your box in the imags you can see my slicer settings (ground layer 0 - wall 1) works for the green and the pink version of…
Here's a cover for the vat on the Beam3D. This makes it more reasonable to leave resin in your vat for a period of time.
Wall mount for AstroAI AM33D Multimeter using command strips. I wanted to get my multimeter up off my desk and onto the wall for more desk space. I noticed that all of the models for my model multimeter were either HSW or pegboard. I…
Description Info for 3D model: You can use this bracket for Noctua NH D14 on AM3 platform. Tested with PLA material on Asus M4A4BT-E (Socket AM3) with CPU AMD Phenom II x6 1090T. You can use original back plate. BOM list: Bolts M4x20 mm…
The original CBT36 Constant Beamwidth Transducer line array was invented, designed and built by Don Keele. For several years, you could by a kit for a pair of these innovative speakers but they are no longer available. This is my…
This is a mount for the Mini Talon and the Runcam 3. A Gopro Session will fit as well but will need a 1mm spacer behind the camera to keep it full forward in the mount. The mount mates up with the foam fuse perfectly, due to the design…
Fram3 is a modular & 3D-printable cover for the CMF Phone 2 Pro that reflects CMF's values of taking pride in how one's tech looks & having accessible designs . Owners can express themselves with customizable inserts that can be 3D…
None of the different counterweights tell you what diameter of bar thaty are intended for, I bought a Sky-Watcher 11-Pound Counterweight for AZ-EQ6 for my AM3 because ZWO doesn't sell a counterweight, turns out it has a different diameter…
* Update 10-5-2018 * Added eagle2 model with 18mm lens opening for larger lenses * Update 10-3-2018 * Added file velcro 1piece version for runcam eagle2 and runcam 3 * Update 11-17-2018 * Added 1 piece for rc3 and eagle2 pro * Update…
This is a lightweight cockpit you can print for the Nano Skyhunter to easily provide mounting for the Nerdcam3d MK1 or MK2 and your video transmitter. It prints in two pieces, either the mk1 file or the mk2 file and the lip file. Use CA…
Mounts the runcam3 camera to the diatone crusader gt2 Printed with saintsmart TPU 220 degrees 1.1 retraction Printing can be tricky since TPU doesn't handle bridges well. For best results, print face down and as slowly and cool as…
About This model is a set of inserts for the Fram3 cover that is compatible with the CMF Phone 2 Pro. Additional Supplies 1mm Acrylic (dimensions below) Sand A sealer (RTV silicone is recommended, but I used petroleum jelly) Charms to…
https://cad.onshape.com/documents/e53894ac34ef602544636635/w/a7f60dc66abf0e514d1e42f6/e/3d0d05c81abdfc2f6054f3c6 en allant sur oneshape vous trouverez les bagues de diam 8 a diam 30
Simple mount for a Runcam3 or GoPro session for on the Awesom F200 Print in TPU for the cam to fit in. Might be updated after feedback *** MAY THE FORTH 2018 update: version 2.1 hopefully fixxed the issues from the feedback Category: R/C…
This is a protective cover, and case along with a pivot mount for the Nerdcam3D MK2. I have it mounted on my rcexplorer tricopter. Awesome camera and tricopter! Enjoy * Update * Added file nerdcam3d-mk2_cover_mobius which is a cover with…
This is a mount I designed to put a Nerdcam3D onto a Cinetank MK2. All you need is this print and the mounting hardware supplied with the Cinetank to mount it to the stock hole locations on the forward top of the Cinetank MK2 upper plate.…
About This model is a set of inserts for the Fram3 cover that is compatible with the CMF Phone 2 Pro. Additional Supplies 1mm Acrylic (dimensions below) Oil (Optional, Note: Can get messy) A sealer (RTV silicone is recommended, but I used…
Mount for the RunCam 3s rubbersuit ( https://www.thingiverse.com/thing:3216295 ) on the Diatone Taycan cinewhoop frame with 10 degree uptilt Print Settings Printer: Renkforce RF2000 Rafts: No Supports: No Resolution: 0,25mm Infill: 35…
This is a simple tool holder for the included tools for an EnduraLam3 cold laminator. I got tired of moving the useless plastic bag of tools around. The holder mounts to the front of the machine using VHB double-sided tape or similar.…
This is a camera mount for a Runcam3 (or session) and 1177 or Arrow (or similar) cameras for the Ritewing Z3. This is a fairly old plane but I've had the kit for years and finally got around to finish building it. So I needed a mount for…
About This model is a set of inserts for the Fram3 cover that is compatible with the CMF Phone 2 Pro. The design is inspired by a combination of liquid motion timers and rainmakers. This insert was supposed to be a liquid motion timer but…
Runcam3 Skin with strap slot Print with TPU No supports needed EDIT 14-8-2018: added a thicker skin with more protection and more rounded edges Category: R/C Vehicles
A card holder for team3 cards with sections for +,++,+++ and bonus cards. No raft or Support needed. Category: Toy & Game Accessories
When upgrading or using the enclosed frame on the Volumic Stream30 MK2 , the original stock filament guide is replaced by a new one, leaving the original snap-in mounting slot completely unused. Instead of leaving that spot empty, I…
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and…
None of the different counterweights tell you what diameter of bar thaty are intended for, I bought a Sky-Watcher 11-Pound Counterweight for AZ-EQ6 for my AM3 because ZWO doesn't sell a counterweight, turns out it has a different diameter…
ZWO AM3N Bubble Level Mount. Uses a 2.4" (60mm) bubble level from Amazon. https://www.amazon.com/dp/B097YVJ9P8
V2 adjust end cap smaller and rounder, also shaved the case back-end wall a bit to give more clearance for wiring, soldering and such.
I love iFlight Transframe X5 frame but why HD camera with uptilt 45 degree ?! So .... Category: Camera
ZWO AM3N Bubble Level Mount. Uses a 2.4" (60mm) bubble level from Amazon. https://www.amazon.com/dp/B097YVJ9P8
Runcam3 45 degree mount Camera should be inserted from the top USB connector is accessible Best printed in TPU or other flexible materials -=I DID NOT TEST PRINT THIS YET=- Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator…
Runcam3 35 degree mount Camera should be inserted from the top USB connector is accessible Best printed in TPU or other flexible materials -=I DID NOT TEST PRINT THIS YET=- Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator…
I received an old AM3+ motherboard and processor with its backplate and retention brackets missing. The latter I could find here. Sadly I found no suitable backplate so I whipped out Fusion and made one. I recommend you to print with…
an adapter to use AM3/AM4 coolers on x99 motherboards
This adapter lets you replace that noisy 80 mm fan on the stock AM3 cooler (which is also compatible with Ryzen CPUs using the AM4 socket). The adapter clicks into the place of the original fan. I have printed it with HT PLA, and it…
Minimalistic housing for the AM312 motion sensor. Remove pins from sensor to make it fit inside. Added fusion360 file for easy mixing. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0,2…
Photo holder composed by 3 principal parts: back front support (spport_1 + support_2) It is fully scalable with locked proportions (otherwise it won't work)
I had an old core 2 duo system that was broken, with a decent cooler on it, and just the stock one for my AMD FX CPU, so I decided to make an adaptor for it. I used M3xH4 threaded inserts for the intel cooler with the screws from…
