1192 modeli
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've designed two different print in place support free axle benders for pinewood derby cars. They are used to bend standard axles, 0.087 inches in diameter by 1 inch long. One is a hardware free version that bends a single angle ~ 3…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
I'm releasing the second subset of my future RC car (a 1/10 UNIMOG chassis as accurate as possible - that's the goal !). The first subset was a limited slip differential you can find at…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This is a rear axle for the C24, B16 and probably other vehicles by WPL. You need to have the metal parts; bearings, rod, gears, etc. It may also work with the stock parts. The margins are tricky, you may have to do some post processing…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Had success printing it in ABS, PETG was to weak and snapped.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
[edit - the current gcode file prints a model with fairly substantial walls. This makes for a robust moon, but is not ideal for lighting purposes. Currently working on slimming down via the model creation process.] I could not find a moon…
Wydruk około 47,43 €–57,97 € nettoWstępna wycena jednego wariantu
Print the dino-clip in place without supports. Print two sets of axles for each hole with supports. Works great at 0.2mm. Set Infill to any percentage, I am using 20%. Works best to insert both outer axle pieces at the same time or do the…
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
A mount to support a thru-axle bike vertically against a wall. Take off your front wheel, roll your bike to the wall, and push. Important Notes - Use at your own risk. Be aware of cranks/pedals! Pedals will inevitably ding a wall, your…
Wydruk około 7,97 €–9,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
an axle mount for the steering servo that also adds a 10 mm lift wpl c24 or c14
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Axle hook left and right for RC model MN82s and MN82.
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These feet are designed to mount a self-adhesive, dampening foot to the printer. I've gone with some 1.5" Hemispherical Sorbothane feet from Isolate-it , but you can use anything you'd like. Remove the existing feet, leaving the extrusion…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out the magnetic version : BOM PETG T spring nuts M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or 3d printed nuts for 3030 for M3 screws M3 screws - 10 mm - https://a.aliexpress.com/_EHrTBG4 A1 silicone brush -…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bought a new wheel for my wheelbarow and the new wheel had a bigger diameter for the axle than the old one. So could buy a new axle or print a adapter. So here is my adapter. I used some ‘long live lube’, but anything should do. Can be…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Fixed the axle to ensure the wheels are not scarping against the sides of the holder and fixed the axle so it locks the spring properly. It all works nicely now! Many many thanks to Joe Mike Terranella for his original remix of the…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
VidaXL awning cylinder holder 450cm The awning cylinder was sagging, rubbing against the mounting screw. The manufacturer does not sell the holder separately.
Wydruk około 7,13 €–8,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Feet to mount 52mm or smaller Sorbothane hemispheres.
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alternate hands for certain Kotobukiya Mega Man model kits such as Mega Man, X, Zero, and Axl, and other such figures. (Model kit not included.) The following pairs of left and right hands are included: Angrily Curled Clenched Fist Finger…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eibos Easydry PrusaXL Side Mount, Fits above Sunlu S4 dryer on my brackets I also designed. Works with or without Prusa XL Enclosure. Requires 2 3030 nuts and holes are sized for M4x16mm hex socket cap screws My Eibos has the extended box…
Wydruk około 13,08 €–15,99 € nettoWstępna wycena jednego wariantu
MegaXL Spigot SCAR The MegaXL Spigot SCAR (or Silly Scar) is a SCAR attachment for 16mm OD aluminum Nerf hobby barrels that stabilizes darts, is easy to attach and detach, is fully air-sealed, and it allows you to fire MegaXL darts off…
This is a modification of my original Print-in-Place Modular truck with just one rear axle. Modules for transporting lower weight cargo (e.g. freight box, car transporting platform etc.) fit this the best. Wheels spin, engine compartment…
Keep your chain on fake cogs to help with chain cleaning after taking off rear wheel. This tool fits 12mm thru axles. Sized with slop to allow shifting of the derailleur. No reason to pay $$ for one from Park Tool etc.. No overhangs, no…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
All normal LEGO Brick from the application LEGO Studio. 21 real Bricks LEGO (with the logo on it)
Axle stands to display your 1/10 scale RC crawler without worrying about getting flat spots on your tires. Keeping the load on the suspension instead of the center skid plate helps to keep the normal ride height - it just looks cooler.…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Earth with a Lego axle hole at the bottom so that it can be used with this Lego orrery: https://rebrickable.com/mocs/MOC-11790/Kaero/planet-orrery-with-shining-sun-mod I printed the earth in two halves and glued them together afterwards.…
Model height ~ 4.6 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) 3D PRINTING SETTINGS Layer Height: 0.1 - 0.2mm Wall Thickness: 0.8 - 1.2mm Infill…
This model is compatible with the lego system.
All Technic Axle and Pin Connector LEGO Brick from the application LEGO Studio. 13 real Bricks LEGO (with the logo on it)
This model is compatible with the lego system.
Draxlotl is its name, its a hybrid between a dragon and a axlotl, it was made with a mindset of something cute, various versions if you check my other files, they are made with a loving mindset, with my boys in mind, one isnt here…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! Most common 73 parts are included: 3704 Black Technic Axle 2 3705 Black Technic Axle 4 3705 Green Technic Axle 4 3705 MdStone Technic Axle 4…
This model is compatible with the lego system.
This model is compatible with the lego system.
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
This model is compatible with the lego system.
I started a project of a fire train. I needed a big water wagon, so I designed the 120 t, 8 axl tank wagon. It is a bit big and printing can get tricky. I also printed it with 50% + infill to get some weight. The wheels are standard 10.4…
You will need six 18x12x4mm bearings, M3x12 screws, M3 nuts and two M4x16 screws and two M4 Nuts. I recommend to use 8mm aluminium hex rod to make the axle, instead of the printed hex rod. The rims get screwed together by tiny 2x10mm wood…
This model is compatible with the lego system.
This model is compatible with the lego system.
The combination of replacing the “kludgy” filament slot with an air-tight collet with gasket and PTFE tubing along with adding a gasket to the base groove and sealing the humidistat/thermostat with silicon makes the case near air-tight –…
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…
This model is compatible with the lego system.
This model is compatible with the lego system.
The original model is entirely glued together, this fulfills a request to make one end of the axle threaded so it can be easily disassembled to refill or replace the pod. Use all other parts (including one axle cap still glued) from the…
32039-Technic Axle Connector with Axle Hole
This model is compatible with the lego system.
Don't use a brim. It will prevent the axle from fitting easily through the bearing in the auto-rewinder. There is not a ton holding the print to the bed but I haven't had any problems with the part popping off during printing on the Prusa…
To help protect your SCX24 Axle housings while out Crawling around your backyard or your neighborhood. The mount will fit Stock SCX24 Axle diff covers, and will also fit Injora diff covers on Stock Axles. Mounting holes on both ends of…
Print Settings: Material: PLA Layer Height: 0.15 Wall loops: 3 Outer wall: 60 mm/s Infill: 25 % Print all parts vertically (as modeled) No support required Brim recommended for the axel
This model is compatible with the lego system.
This model is compatible with the lego system.
This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…
PrusaXL Purge Tray R1 Few people had issues installing the original. The two clamps options are designed to grip the bed tray outside the foam protected area. The tray is spanning across the print bed retained by the two clamps. Use the…
This model is compatible with the lego system.
This model is compatible with the lego system.
I love making toy cars, and all cars need wheels. This is the best snap fit wheel and axle combination I have found after many attempts and months of testing. I use this on all of my models that are at the appropriate scale. This design…
This model is compatible with the lego system.
This model is compatible with the lego system.
Bracket for road- or gravel bike to safe space during bike transport. Printable without support if layed on the side. I recomend to drill out the 12mm hole after printing due to schrinkage. I printed it with 5% infill and just 2…
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
lego pice 4032 or rounded 2x2 plate with axle hole.
This is the transaxle required for the VW Engine model. The transaxle includes the transmission and axle differential. Updates: 9/14/2026: Updated Instructions - Throwout bearing assembly uses 4-6700zz bearings, not 6701zz.
LEGO Compatible 32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole
Simple limiting strap mounts for the front and rear axles on the SCX24. Front axle is for axles upgraded to an ES08MA II steering servo with one of the typical kits. I printed in PETG for the toughness. ABS would also be an excellent…
This is a recreation of Lego Technic part 6332570 (axle and pin connector). I printed on my Prusa i3 MK3S at .10 detail. After printing, I would recommend either the .07 or .05 ultradetail. The part works perfectly but it is not totally…
This model is compatible with the lego system.
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
Needed a way to mount bikes with thru-axles in the back of my van. Decided on this clamping design as its easier to load and unload bikes rather than solid thru axle mounts that I used in the past. This was designed to work with 12x100mm,…
This is a ball-bearing axle that fits in the Polymaker PolyDryer dry box to reduce the friction when feeding TPU and other sensitive filaments. I found that the cardboard spool on my Siraya Tech 85A TPU tended to hang up on both the…
This model is compatible with the lego system.
