Wyniki wyszukiwania: bai

Mini glide bait v2 (fully 3d printed)

check out the new version link -100 percent infill -glue tail on to body

[v2 abailable!] ATC Flight Progress Strip System

NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…

Bait Jar for Crab / Shrimp / Crawdad traps

UPDATE: The .stl file now has the slot in the tab! This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc.…

Baileya lamp

Remember to print the lampshade in vase mode.

WOOD CHISELS HOLDER STANLEY BAILEY

Wood chisels holder for Stanley Bailey chisels

Die Plates for Bailey Standard 4 Clay Extruder

Upgraded die plate for Bailey Standard 4 Clay Extruder. Dies sold with the machine are difficult to set up and causes a lot of clay loss out the sides during use. This 3D printed version is the entire die in a single piece, it fits snugly…

Disposable Ant Bait Station

Ant bait station for use with Terro Liquid Ant Killer or equivalent. Open top for visibility and easy refill. Handle for easy placement and disposal.

Baikal IŽ 27 choke wrench / key

Choke replacement key for Baikal IZ 27 shotgun

Tray for KORUM Bait tub

Simple inner tray for KORUM Bait Tub 1,2l

organiseur salle de bain

Ne cherchez plus chaque chose à sa place

Burj Khalifa - Dubai , UAE

🇦🇪 مرحبا بكم في دبي Welcome to Dubai! The Burj Khalifa (برج خليفة, Arabic for "Khalifa Tower" ) is a skyscraper in Dubai, United Arab Emirates (UAE) . With a total height of 829.8 m (2,722 ft) and a roof height (excluding antenna, but…

Crankbait Fishing Lure

This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) where well worth the effort. The bait is printed in two halves and then glued together. (I used super glue) Three small…

Mini Glide Bait fishing lure

3D Printed Mini Glidebait Fishing Lure The lure features a two-piece jointed body that creates a smooth, natural swimming action when retrieved. With a slim profile and slightly curved shape , it mimics a small baitfish, making it perfect…

Ultralight Crankbait Lure V2

This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…

Swimbait Fishing Lure

This lure Prints in one piece and has multiple hinged segments that loosen up once the lure is bent back and forth a few times. This gives it a swimming action and it has internal chambers for adding metal bbs for rattles.This lure prints…

axe + clip de roue pour bain de soleil GROSFILLEX

Bonjour, Pour mon bain de soleil, afin de remplacer un axe et des clips qui, avec le temps, se sont cassés, j'ai recrée ces 2 éléments. Couches : 0.3mm remplissage : 70% Matière : ABS (mais possible en PETG prusament), Avec bordures et…

Crankbait Fishing Lure

This is just another Crankbait I made.. this one a redesign of a lure I carved out of balsa wood 25 years ago. I'm still working out the best infill settings so this is a* "Work in Progress" * for now. I did a short write up on my website…

Micro Crankbait Fishing Lure

To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…

Simple Pickle with bail to be made as an ornament or even jewelry, or just.. a pickle. christmas pickle

This is a .stl and .3mf model of a pickle i created. have fun!.

Fishing lure / bait mold golden fish hoof

Easy fishing form / mold for 16cm fish 6mm screw holes 8mm cutout for eyes Enjoy

raptor mini glide bait

raptor mini glide bait

Jerkbait Fishing Lure à la Westin Swim

This lure is my go at a 3d printed jerkbait which sadly are very rare to find on printables or thingiverse. I designed this off of the Westin Swim and gave it the same details. I would be very happy about some makes or even fish you…

Fishing Softbait Shad Mold 9cm

3D printable mold to pour silicone 9cm Westin clones YOURSELF! No supports needed. Would recommend ABS/ASA at the minimum to ensure quality pouring without destroying the mold. You can print either the master itself to make your own mold…

Swimbait Fishing Lure: Detailed Minnow Design, Customizable Assembly

Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…

Deep Diving Mini Crankbait

Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…

Dummy 13 Star Wars Clone Trooper Droidbait

This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅

Fat Jerkbait - wobbler topwater

Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…

Fishing lure / bait mold

Easy mold for your lure have a nice day by water Enjoy

Crankbait Fishing Lure (Clear Lip)

This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…

Realistic Sunfish Jointed Swimbait Fishing Lure

NOTE - This is a failed project! I'm giving up on this design and moving on to other things.... I'm leaving the files up just encase anyone else is brave enough and wants to experiment with it. This is a Realistic Sunfish Jointed Swimbait…

Baby Pike Swimbait fishing Fure

My Youtube channel: LuresForAll https://www.youtube.com/@luresforall/featured You can watch me assemble it here: https://youtu.be/SQy0jy8JkJ4 You can watch me paint it here: https://youtu.be/DinvIs6oJjI You can watch it Swim here:…

Can of Worms (Bait Jar)

This is a little “bait can.” It's about 58mm tall and 100mm diameter. The lid has holes in it for the little wormies. I have also included an alternative lid (shown in orange) that is a little easier to operate, and has larger/more…

The 3.5-inch Swimmin' Frog Open Pour Bait Mold by MakingBaits.com

Introducing the 3.5-inch Swimmin' Frog Open Pour Bait Mold! Designed with meticulous attention to detail, this mold from TheMakersWorkbench and Making Baits is a must-have for anglers and DIY bait-making enthusiasts aiming to create…

Lipless Crankbait

This is another lipless rattletrap type crankbait I designed. This is a little different then a normal type lipless lure as I tried to make the body a little wider in hopes it would maybe dive a little deeper or have a different kind of…

Heydar Aliyev Center - Baku , Azerbaijan

🇦🇿 Welcome to Azerbaijan! This model was designed by Faiz Kamel @churnwalker21 The Heydar Aliyev Center is a 57,500 m2 (619,000 sq ft) building complex in Baku, Azerbaijan designed by Iraqi-British architect Zaha Hadid and noted for its…

Generic AF Glide Bait V1.5 Fishing Lure

FREE 1-page Glide Guide (recommended before your first swim test) Want the Top 5 tips to make your first glide swim right? Grab the FREE 1-page Generic AF Glide Guide → https://mailchi.mp/a695a4acc986/pr-glide-guide (Instant PDF + if it…

Double-Sided Spinner Bait Tackle Box, 100% printed

The Double-Sided Spinner Bait Tackle Box has two compartments with lids to store 15 lures with a max length of 95mm. The compartments are designed to securely hold and protect each individual Spinner Bait from damage or tangling. The box…

2.8 inch crankbait fishing lure

To assemble: Print the model. Glue 3 or 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the line tie and hook hangers.…

Ground bait ball maker

Ground bait ball maker Its quite important to have your bait on the right spot when fishing, with this tool you can make round balls from your (moist) ground bait or soft pellets. Fill up the ball maker and compress it. The slot in the…

Fishing Lure/Bait - Maggot

I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…

Jerkbait Pike Lipless Lure

First try designing a fishing lure, been making them for years from wood, but decided to model one, so everybody could use it. -it is wire trough lure, made for 0.8mm wire -i haven't printed it yet(I'll update you, as soon as i make it)…

Sun Fish Swimbait Lure

This is a remix of my Realistic Sunfish Jointed Swimbait Fishing Lure. I'd given up on that design but after learning about printing on fabric and making several other swimbaits that worked I'd though I revisit this design one last time.…

Fishing silver lure / bait mold hoof

easy printable mold for 9cm fishing lure 6mm screw holes Enjoy

Fishing lure / bait mold

Fishing 14.5cm twister lure form / mold

RC Bait Boat

Here you can print and assemble a grate fishing bait boat. This filles contain all printed parts models, main code and other files, for full assembly you need to buy additional parts. In my example i use a ESP 32 cip, and a custom board…

DIY fishing lure - crank bait 75mm

~75mm crank bait in 4 pieces with wight/sound chamber. Print the following pieces 1 x Left 1 x Right 2 x Pin Add wire to hold hooks, glue, ad the right size hooks and go catch the big ones! and to add the extra toch, paint it in your…

Garden Ant Bait Station Stake

Ants-Be-Gone parametric model was created in OpenScad using the BOSL2 library . The design is inspired on an existing commercial solution, Ants-No-More ®. All dimensions were based on the product descriptions that I've found over the…

Rubber fishing bait mold top filling

Simple top filling mold for new rubber bait a simple way to recycle your old and torn baits, just put your rest of baits to bowl and put it to microwave, then just pour that rubber to this mold, we are using abs or nylon bacouse of heat…

Flat Side CrankBait Lure

This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to duplicate it in CAD for 3D printing. There are two versions of this one... the first one I printed looked awful skinny so…

Secret compartment / Hex Cross Locket <Print in Place Hinge> with Interchangeable Bail

Update 12.23 Version 2 Update ( fixed fused hinge error during slicing) --------------------------------------------------------------------------------------- What will you put in the secret compartment? The hinge and finger toggle are…

Redesigned roach / ant trap (bait station)

This is a bait station for insects, in other words, a container that houses insecticide or poison in a way that's attractive and accessible to insects, but less accessible to pets & other wildlife. I was prompted to design this station…

Whitewater Raft, Self-bailing

Designed using parametric equations and Calculus ! (And kids still say, “ when am I ever gonna use this? ” … for shame!) Three polynomials (one for each axis) describe a beautiful curve in 3-space for half of one side tube. Then cap it…

Fishing lure / bait mold 5,5 cm TOP filling hoof

easy printable practical fishing lure mold / form for 5,5cm rubber fish

Fishing bait / lure mold, form

Easy to print mold for your own fishing twister lures Enjoy

Mouse Bait Station

It's autumn and the mice are heading back inside. Time to give them a treat. This mouse bait station will hold bait up to 30x30x60mm. I print with supports only on the hooks that snap the top to the bottom. The rest of the overhangs print…

Fishing lure / bait mold 13cm twister

Fishing lure / mold 13cm twister with belly 8mm eye cutout screw hole 6mm Enjoy

Rat Trap Mod "The Bait Cave"

Rats are crazy smart, and the success of a snap trap is often determined by the angle from which the rat tries to take the bait. This housing forces the rat to come at the bait from the front, putting it in the optimal position for…

Fishing softbait mold

Forma na výrobu gumených nástrah

Ant Bait Station

A container with a lid for use with Nippon liquid ant killer gel. There are two types. One design with a screw lid and another with a push-on lid. Both seem to print well for me. Dispense a small amount of ant killer gel into the base,…

Fishing mold / form Top filling lure / bait

Printable fishing mold for rubber fish (Top filling) Enjoy

Swimbait Minnow

This is another swimbait that I am working on using the same fabric printing technique as my last swimbait. This one is modeled after a rubber minnow swimbait so it only has three sections. More info and build pictures can be found here…

2.75" Ultralight Swimbait (Fishing Lure)

This is an Ultralight Swimbait that is designed to entice almost any type of fish. The swimbait 2 ¾ " long and is my best design yet. I have tested the stresses and have found that it can hold about 15lbs (6.8kg) max as long as you print…

SWIM BAIT

! Flexible materials are suggested ! Scalable +50% infill Supports needed Painting is suggested Add supports as shown below

Knife Baioneta M9 from CSGO

One of the bests knifes on csgo, now you can print it.

Fishing Bait Flexi

My first atempt, its not perfect but on right way. Added holes to screw in mini hook holders. And there is 3x8mm holes in middle of body sections if needed to add more weight with steel balls, weight can be added manualy in the middle of…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

Big-bait model SWIMER big lure

Overall length: 230mm Please model the lure vertically. It is already jointed, so please model it as is. There is a weight room in the width section. Use M3 nuts and M3 screws. The dorsal fin and tail fin should be modeled with TPU.…

Cedar Glide Swimbait (Fishing Lure)

This model is similar to my shiner swimbait but it is based on a actual lure. I designed this model only using Fusion 360. I like printing all my lures in 0.1mm because they don't take too long to print and it gives better looks. Once you…

Ultralight Crankbait Lure

These Ultralight Crankbaits were inspired by rallekralle11's tink crankbaits they are just a little more stream line but being so they don't have as much action (wobble) as his. They still work great and I caught a ton of Bluegills and…

Zander (Walleye) Two-Piece Swimbait lure

Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…

Jointed crankbait fishing lure

To assemble: Print the model. Glue 2 - 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the joint hardware, line tie and…

Fishing lure / bait mold dragonfly

Easy printable dragonfly form / mold for fishing Enjoy

Deep Dive Crankbait

Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…

Roach / Ant Trap (Bait Station)

after my cat got into this station, I would now recommend my own from-scratch redesign, with a clip-on lid . — Strictly speaking this is of course not a trap, rather a bait station, i.e. a small container to apply poisonous bait for…

Ant & Cockroach (Roach) Bait Station – Pet-Safe, Refillable, Reusable

This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…

Deep Diving Crankbait: Customizable, Weighted, and Easy Assembly

This versatile fishing lure is designed for customization, featuring internal cavities for adding weights (up to 11 mm in diameter, 2x), as well as a dedicated cavity for steel wires to secure your fishing line and treble hooks. For ease…

Fishing lure / bait mold nymph 18cm

Fishing lure / mold 18cm nymph for predator fishing 6mm screw hole Enjoy

Shiner Swimbait (Fishing Lure)

This is lure is based on the striped shiner, these fish can be found in Central North America (From Ontario to Louisiana). The model is fairly scalable, if you decide to scale it up, I would only recommend going up to 300% and no further…

Fishing lure / bait mold EAT ME! fish with promo

easy printable fishing lure mold with promo code :)

Baitcaster fishing reel, 3:1 ratio

This is a baitcaster fishing reel with a 3:1 ratio, Need supports. Also needs glue/welding.

Relax Crawfish Bait - Replica & Molds

Printable mold for a crawfish bait for fishing. Print the molds in PLA or ABS for good Silicone molding results. You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!

Lil Cranky Crankbait

Lil Cranky Swimming Crankbait The bait runs about 0.5m deep, length is 45mm. I recommend using an SLA printer to make one, but it might also work with FDM, didnt try that though so if you do it, please tell me how it went! The belly is…

Ide Lipless Crankbait fishing Lure

Update 1 July 2024: Fixed a symmetry issue Removed the unnecessary air chamber Changed the design of the weight chamber, it now accepts 3 x 6 mm balls Made it thicker to hold more weight For print orientation, check the 3mf file with…

Kurt Cobain funko POP!

Print & acrylic draw

Fishing silver red hoof lure / bait mold

Easy to print mold for your fishing lures, hoof 6mm screw holes 6mm cutout for eyes Enjoy

40 Gramm Crankbait / Wobbler

Instructions 1 - Print both halfs 2 - Insert 4x3 4mm lead BBs to the triangular lead holes 3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together 4 -…

Fishing lure / bait mold Top filling

easy printable fishing lure mold for 10cm fish

Fishing Lure, simple crankbait type

This is a simple lure. Assembly will require some hardware from your local fishing tackle shop. The points for the hooks are indicated by the circular bases in the ideal locations. Changing infill density will change the depth and…

Topwater Stickbait Pencilbait 7cm / 3''

I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…

Saveiro Cros G5 rebaixada

confeccionado por inteligencia artificial por isso alguns defeitos na placa dianteira e traseria mas de resto esta ok.

Rodin Le Baiser The Kiss

Commissioned by the French state in 1888, carved between 1888 and 1898. Joined the collections of the Musée du Luxembourg in 1901; transferred to the Musée Rodin in 1919. The Kiss originally represented Paolo and Francesca, two characters…

Fishing Reel Baitcaster.

Baitcaster reel. Love it on channel catfish.

Keitech Mad Wag fishing bait replica

You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!

Chomped Crankbait

This is a remix of one of my best producing crankbaits. Injured or wounded bait fish attend to attract more bites so I added a nice bite to the original crankbait (more so for fun) but maybe it will turn up the bite also…. The build…

MOULE LEURRE SOUPLE FORME POISSON BIGBAIT 18CM

Imprimé en PLA à 40% pour être sur de ne pas déformer le moule. Pour plus de détail en 0.12

Dough Bait Holder for single fishing hooks

Helps to hold dough baits such as Power bait onto single hooks. Designed for hooks #6 and smaller. Just hook the holder onto the hook and form the dough bait around the holder. This model scales well if you need to use for other size hooks.

Cat Safe Ant Bait Station

EDIT: If you download and don't post a make, shame on you. UPDATE: A new version - v10 - is now available. Printed it in PLA, looks good. Changelog: Bottom filleted (to prevent loss of digits!!! :)), as suggested by maker. Cover knurled…

Hard bait lure box

This is a hard bait storage container that can be used on both sides. It can store metal jigs, minnows, egi, etc. that are less than 100mm long. There are five compartments on each side. Each part requires some support due to protrusions,…

Fairbairn-Sykes Knife Prop

I wanted a accessible knife for my airsoft loadout and remembered this cool one from R6 siege Thatcher character. I split the knife and handle into two for testing purposes but will print the knife with TPU standing up as well as the…

USS Bainbridge DLGN-25

USS Bainbridge (DLGN-25/CGN-25) was a nuclear-powered guided missile cruiser in the United States Navy, the only ship of her class. Named in honor of Commodore William Bainbridge, she was the fourth US Navy ship to bear the name. With her…