Liczymy pasujące modele…
Compatible with any 54mm basket of Sage/Breville Barista Express, Barista Touch and Barista pro enjoy
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
Reduce mess and waste when grinding and tamping. Compatible with 54mm portafilter. Clearing for tamper. Prints with minimum organic support
Wydruk około 3,20 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a set of cubarithms, a tactile maths aid based on Braille, designed for arranging calculations physically on a grid. In standard use, cubarithms, invented by Alphonse Oury in 1886, help with learning written addition, subtraction,…
Wydruk około 4,17 €–5,09 € nettoWstępna wycena jednego wariantu
Pour raccorder un embout d'aspiration Festool au gabarit de perçage Wolfcraft 4686 https://www.wolfcraft.com/products/wolfcraft/fr/EUR/Bestellvarianten/Bestellvariante-extern/Guide-de-perçage-mobile/p/P_4686 Inclut les ergots de blocage…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter for the Sage Barista espresso machine with a 54 mm portafilter. It helps guide all the coffee into the portafilter during grinding. Before grinding, attach and lock it onto the portafilter. Then you can use the grinder…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This template is used to pre-drill the table to help install the Cobalt turnouts under the model railway layout. Printed in PLA. Position template and mark to pre-drill support.…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for the 9Barista portafilter. Holds into place with 8 5x1 mm magnets. Prints upside-down, no supports needed. You can access the 3d model via Onshape .
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This simple design creates space on top of the grinder to store your coffee equipment on it. It consists of three parts: Body: main part of the lid Top ring: separated from the body for more simplified printing Sealing: For good fitting…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Organize your coffee station with this simple storage solution. This holds paper filters that fit the Breville Barista Express portafilter. It carries two size filters: 45mm for the bottom of the puck, and 54mm for the top of the puck.…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
here be barbarians for your TTRPG needs
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
This is my character from my DnD game. He is the avatar of Thor to walk among the humans. I hope you like it and have some awesome adventures with him.
Advanced users of the Breville Barista Express espresso machine likely don't fill up the stock bean hopper, but instead only grind enough (carefully weighed) beans for a single espresso shot. The stock hopper has an issue that beans fall…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) CONAN THE BARBARIAN! This isn't your Arnold Schwarzenegger Conan the Barbarian, it's more like your Frank Frazetta Conan the Barbarian,…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
A mighty owl-man barbarian. Strong and down for anything. ANYTHING. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build…
Water chute for Breville Barista Express / Express Impress espresso machines. This sits on top of the machine and allows easy access to fill the rear water tank. Works great if your machine is under a cabinet. VERY very new to 3D modeling…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I will pull these off here if this keeps happening. I put these up for the benefit of the community. Not the monetary…
A force of nature that rips out trees as easily as we snap a twig. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate…
This is my participation for the prusa contest. I made a barbarian warrior all based on my imagination and real world research, I hope you like it.
I love espresso. I love making espresso. But I hate needles! What is this thing? A WDT tool is used to stir freshly ground coffee. By distributing the powder evenly you reduce the chance of channelling and your espresso is always perfect…
For the best look print the 3 pieces separately and assemble them (in the picture). Depends on how accurate your printer is. May need some filing and mallet action to encourage the handle to fit. Otherwise, print the 1-piece with support
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I…
Made from a full body Conan I'm working on. As usual, don't know how well it will print. Medallion, teeth and flap on his forehead are separate objects and are probably better off being removed and made by hand or printed separately.…
Same Half Orc Barbarian in two poses
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…
This funnel is designed to prevent the grinded coffee to spill over during the grinding process. Lock the funnel in place, insert the assembly in the grinder and grind ! You can remove the assembly from the grinder, and conveniently…
I recommend every hobby barista, especially those who are just starting out, to use a leveling tool. I designed this one for our SAGE Barista Touch. It is based on the original dimensions of the trimming tool from SAGE and fits perfectly…
3D Printed Warrior Figure
Willkommen im Schlumpf-Café! Diese Figur zeigt den Café-Schlumpf mit Tasse in der Hand und einem Schild mit "CAFÉ" – bereit, die Gäste zu begrüßen. Ideal für Dioramen mit Alltagsszenen oder als originelles Sammlerstück. Der Druck ist…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Meet Bari, the calm and wise barn owl who’s ready to perch right on your shelf! With soft lines, a rounded silhouette and a heart-shaped face, he brings cozy forest vibes to your 3D world in just under half an hour. Super cute and fast to…
Barbarian human wielding two axes. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Die Figur ist ca im Massstab 1:24 und ideal für Resin Druck
The perfect tamping station with a non-slip TPU bottom (glue on) for stability. Designed at the ideal height for stock Breville/Sage Barista Express portafilters (53mm). As seen in the pictures, the filter rests on both the 3D-printed…
We tweaked the model to allow our kids to start learning the basic guitar chords, since a baritone ukulele is tuned DGBE. The first one we made is in the pictures below, and it had to be modified a lot to work for the much smaller…
This tool has been designed to easily create a standard MFT like workbench and drilling 20 mm holes every 96 mm. This drilling jig has been printed in Prusa PETG from the the STL found on Thingiverse with supports. All details in 3MF file.
Warrior Conan the Barbarian
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…
Only 3 different poses this time. All three armor tiers included.
☕ "Barista Buddy" Vol. 63 // The Honest Shelf ☕ The ultimate companion for your coffee station! ✨ If You are interested of my other Designs, feel free to visit me under 👉 https://www.instagram.com/cozy.craft.studios/ I designed the…
Very minimal holder/tamping base for 54mm Breville Barista porta filters. Should also work with other similar porta filters of the same size, though I have no t tested. Prints without supports.
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
The purpose of these modifications was to reduce the angle of the overhangs on the bellows segments and also make the walls very thin to help with tearing due to the material stressing itself. It also has the added benefit of moving more…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
A sleek, 3D-printable measuring spoon designed to accurately portion 7 grams of coffee grounds for espresso and filter brews. Ideal for baristas and home brewing fans who want consistency and style in their coffee routine. ✅ Why You’ll…
Stampato in PLA, include modello monocolore
This is my 86mm long Minbari Sharlin cruiser from Babylon 5. Its in the same scale as my 92mm Omega Destroyer, and the Revell Babylon 5 station model kit. I printed it on an Anycubic Photon at a 0.05mm layer height. It is intended for…
THIS WILL FIT ONLY BARISTA EXPRESS, NOT PRO snap on barista express steam lever, please comment your opinios. very minimal simple but effective go for high perimiters (untill the thin part of the handle is 100% solid, around 5 walls) i…
A simple hook for grabbing rope and pulling underneath bands or cuffs for shibari or other rope bondage. This was designed as an accessibility aid for those with reduced finger mobility and strength, but helpful for anyone dealing with…
Fantasy Warrior Miniature – 3D Printed Model for Tabletop & Display
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
Inserted it makes a 10mm gap between the lower part of the machine and the original lid of the tray. Combined, it raises the cup 17 mm above the lower surface, allowing a standard IKEA cup to fit perfectly.
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale Usually my minis are supportless, but this one is not, so take that in mind. Still, is a funny and printable mini. You can find me…
Valdos "Cinderheart" The Survivor of Red Peak Race: Fire Genasi (Reflavored: Magma-Infused Humanoid) Class: Barbarian (Path of the Giant) – Level 5 Background: The Survivor (Custom/Outlander) Alignment: Chaotic Good Tone: Heroic / Brutal…
Organizer for 5 tools for Barista Pro. I have model BES878BSS and I don't know if it works for other models, but if you interested, we can try to work it out. You can put it on the warmer surface. I use it for next 5 tools: 53mm Coffee…
Dwarf barbarian miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
This is my Goliath barbarian wielding a halfling barbarian wielding a battleaxe. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix/update of a model…
rises the cup by 35mm diameter of the zylinders at the bottem is 10,75mm distance between the zylinders at the bottom is 32mm You need 2x M4 countersunk bolts (DIN 7991) with a lenght between 12mm and 20mm. If it fits other…
Hello. This is my first model for sla printers. Meet Sharky, the half shark - half human bulky pirate-barbarian, who wields heavy anchor as a weapon. When he fight his enemies he uses anchor, teeth and fists. Hope you enjoy!
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Material: Prusament PLA Vanilla White 1kg Layerheight : 0.20mm (SPEED) Support: Not necessary but use automatic paint for better result Support Style: Organic Infill: Lighting (For Filament Save) Perimeters: 3 (For Durable)
Are you a fan of post-apocalyptic content, or would you like to live in a devastated world while staying comfortable? Stay **sheltered** and wear this superb radioactive barrel, lit up by the LEDs inside. Surprise! if you print it with…
⚔ Vharka Skullrend, Barbarian Warlord Medium humanoid (human), chaotic neutral Armor Class 16 (hide armor, natural toughness) Hit Points 112 (15d12 + 30) Speed 40 ft. STR DEX CON INT WIS CHA 20 (+5) 14 (+2) 15 (+2) 10 (+0) 12 (+1) 13 (+1)…
Erhöhung für Espresso Tassen, Height increase espresso cups
The previous miniatures that I printed four years ago for this boardgame are looking ‘dated’. With sharper printer tech, I figured we can create more detailed models for this fun game. I also like having the letter on the back, rather…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Warrior Figurine Conan il Barbaro barbarian
These Peco rail templates help you trace and lay Peco flexible rails following the 3 curves used in Setrack: the R2, R3 and R4 curves. There are also templates for connectors between each of the curves, e.g. R2 to R4. Please note that…
Usage This is designed to be used during rope bondage/shibari to add fun and randomness to your tying, and perfect for a rope jam. The spinners operate magnetically, so spinning the back spinner will also spin the front, and they will…
Female barbarian raging with a giant sword.
This 3D model features a fierce orc barbarian raising his axe, ready for battle. Great for tabletop RPGs, display dioramas, or as a collectible.This 3D model features a fierce orc barbarian raising his axe, ready for battle. Great for…
🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a Bean Hopper Extension for the Melitta Barista Coffee Machine Series (T/TS/Smart). I was tired of having to refill the bean hopper every day, so this extension more than doubles the capacity and is a total of 80mm high including…
So many revisions... but it works! Inside I created a spring to press down the valves on this baritone. It's got .3mm clearance on the sides and 0.5, between vertical surfaces, so it prints in place without any pauses or anything else…
This is my take on a Dragonborn Barbarian. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Un petit gabarit pour répéter ou rajouter des trous sur un meuble en se basant sur le système 32. La butée positionne les premiers trous a 37 mm du bord. pour répéter facilement une série, il suffit d'insérer deux taquets dans des trous…
Introducing the Barbarian Gnome, the fiercest warrior your garden (or tabletop) has ever seen! Armed with dual battle axes and a no-nonsense glare, this muscle-bound gnome is ready to defend his realm from any threat — no matter how big.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Disclaimer This hopper does not have much finger protection when installed. It is also easy to disengage the grinder lock when installing/uninstalling the hopper. If you choose to use this, please only install/uninstall it with the…
Das Original teil der Phillips Baristina war mir zu hoch und zu klein. Beim verschieben des oberen teils hat es immer unten auf die freie Fläche getropft deswegen habe ich es länger gezogen damit es auch dort hin tropft wenn das obere…
Remixed from the original model by Simbungu: https://www.printables.com/model/80817-breville-barista-express-single-dose Refined look Added magnetic cap! Cap can be used to measure the beans! Feeder is separated as inside and outside to…
(---english below---) Ce système permet de maintenir des systainers sur des plateaux coulissants pour en faire des tiroirs. J'ai utilisé des coulisses à sortie totale de 350mm et des plateaux en CP de 400mmx305mm. Les gabarits permettent…
