Liczymy pasujące modele…
Beverage Can Opener – No more struggling with stubborn tabs or ruining your manicure! This simple but smart tool makes opening beverage cans smooth and easy. Turn off arachne mode, 3 outer walls, 20% infill, 7 bottom and top layers. ✅…
EN: The cup holder adapter is designed for the Dacia Duster, but will also be used in many other vehicles. It simply slides into the 1.5 litre holder in the centre panel in front of the rear seats and, depending on which side you insert…
I'm happy about any improvements and feedback.
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…
Wydruk około 11,25 €–13,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
quando ci si assenta per qualche giorno da casa e si lascia il cane o il gatto da soli si può collegare il beverino ad un contenitore di acqua posto in remoto al punto di ristoro
Benchy barge, sized for a 355ml can to fit neatly on board. No supports, no special instructions, send it, load it up with your beverage of choice. Cheers!
A smart can opener that also works as a protective cover! Use 3 walls, 5 bottom layers + 6 top layers, 0.15 mm layer, 25% infill, no supports required. ✅ Opens drink cans easily – no more broken nails or sore fingers ✅ Doubles as a cover…
UPDATE 7/27/24: Made a number of changes: Added a “Full” version of the 5-can model with Covers Added covers with slot in the front to make it easier to remove the cans in the top dispenser. (Thanks to @Justnice980 for the idea!) Renamed…
Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…
Amazing top cover for your beverage cans with a 100% success rate in coverage.
Self explanatory, really. Pick the sigil you like best and print it in your favorite color material. These are designed to be a slip fit with a standard 12oz aluminium can, so keep material shrinkage factors in mind. If you're not sure,…
Use 4 walls, 5 bottom layers + 25% infill. A compact 3-in-1 beverage accessory that combines a can opener, protective can cover, and bottle opener. Use the can side to easily lift and open the pull tab on standard beverage cans. After…
Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…
This is a holder for cans, bottles, glasses and wine glasses to be mounter on a metal frame garden pool. I’ve designed it for a pool made of 36mm tubes. It can be used with other diameter of tubes if the hooks are adapted. The main part…
Nested and keyed Beverage Can Dispenser for standard 12 oz “Slim” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
Please share your makes! The perfect tool for DIY security tools - the Beverage Breacher. This 3D printed template is your go-to solution for creating padlock shims from ordinary aluminum cans. Embrace the blend of traditional…
Nested and keyed Beverage Can Dispenser for standard 12 oz “Slim” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
Beverage/Coffee Coaster Set – Stylish, Practical, and Heat-Resistant The Beverage Coaster Set is a sleek and functional addition to any home, office, or café. Designed to protect surfaces from heat and moisture, these coasters are…
Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…
Nested and keyed Beverage Can Dispenser for standard 500ml cans. There are versions that hold six (6) or five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed…
Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…
Fathers days tours are difficult. You need to ride a bicycle and at the same time have a place to store your beverage, but your hands are busy. Suffer no more, because here is the solution - the bike beverage buddy. Hands on driving but…
Description New version available. In this version, 2 cords can be fed crosswise through the can holder, which should improve stability. I designed a beverage can holder (0.5L) for a friend and printed it in PETG. I haven't tested it…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix of great Michał's project. I have removed both holders for glasses.
Nested and keyed Beverage Can Dispenser for standard 7.5 oz “Mini” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
I love the Beverage holder, but it doesn't fit on my Bestway pool. I also love the wine holder but I don't drink wine (printed it anyway, though). I'm in no way a TinkerCad expert, but I managed to glue together both models so that the…
Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…
Features: Supports a whide range of cans through the adjustable top shelf and spacers. Supported cans: Ø= ~50mm min to ~103mm max / Hight= ~52mm min to ~138mm max Print settings: Wall x 3 / Layer hight=0.2mm / Infill=15% Gyroid /…
Nested and keyed Beverage Can Dispenser for standard Europeans sleek/slim soda cans (330 ml / 11.2oz). Holds seven (7) cans. Model is split into two halves so it can be printed on a standard size printer (bed size ≥ 20cm). The two halves…
Remix of @mhparsons Beverage Can Dispenser to fit Australia 375ml cans. Comes with a common front section and a choice of 5 or 6 can back section.
The trailer i found on thingiverse was way to big for the Peterbilt i made earlier. So i scaled it to 43%. I also did not like the tank design so a remade it. print at 100% The wheels and rims were also changed. print at 100% I made some…
Size: 10 x 10 x 0.4 cm To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D
Warp into some fun with this video game inspired can coozie. Complete with a sturdy handle this print actually keeps your drinks cool with a thick insulating layer. Use lightning infill to have a air barrier between your drinks and the…
Nested and keyed Beverage Can Dispenser for standard 7.5 oz “Mini” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
Nested and keyed Beverage Can Dispenser for standard 330 ml. Euro cans. Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
Nested and keyed Beverage Can Dispenser for standard 330 ml. Euro cans. Holds five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
Small stackable boxes for batteries. There is a model for AA and for AAA available.
Open, reseal, and protect your drink from insects, regardless of the can size.
Simple Holder for most beverages like Beer Cans, Energy drinks, Glas Bottles. simply glue together after printing. Just hangs over the Edge of most Steel-Wall Pools and Frame Pools. I ptinted with 0.6 and 0.4 nozzle, both work fine
Need a fun way to tell your drink apart from others'? These can-holders print quickly in vase mode and will make it easy to track your beverage. This model was designed to be printed with TPU filament. TPU makes the can-holder extremely…
Designed for the everyday dilemma of bottle ownership mix-ups, this locker ensures that no one - be it kids, schoolmates, coworkers, friends, roommates, or even your well-intentioned but forgetful girlfriend - can mistakenly snatch your…
Just a little tweak. I hope you like it.
Remix of "V2 Beverage Can Dispenser" for Monster cans (500ml)
Printed in PLA+, 30% infill, no supports. STL file is slightly revised from photos to allow for better unsupported print. Designed to snuggly hold either beer/soda cans/bottles, or larger coffee mugs.
small soda can opener super fast print, only 8-10 minutes (different setting makes different print times) perfect for the summer and the long lady nails. printet in pla on an Anycubic kobra 2 neo at 120mm/s
Universal Drink holder for a variety of glasses (see pictures) The idea was to develop a drink holder that could be taken on trips without taking up too much space. Thanks to the foldable handles, the Beverage Buddy is only 17 mm thick.…
I use this to put bevrages on my peg board. I used a lot of plastic at a little bit of infill so that it insulates the cup. Also acts as pen holder. Category: Organization
Wish you could give a proper send off to the beverage you are about to consume? Have no fear because the perfect drink coaster is here! Here lies Bev E. rage, the ultimate tombstone memorial for your drink and a practical drink coaster…
Transform Your Home Décor with 3D-Printed Honeycomb Coasters! Are you a home décor enthusiast with a passion for modern design and cutting-edge technology? Elevate your space with our stunning 3D-printed honeycomb coaster set, best when…
Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…
Reverse bowden adaptapter for Ikea Platsa and Original MK3s+ frame, with doble M10 racord. Please, use that extruder adapter to close reverse bowden circuit: https://www.printables.com/es/model/295803-prusa-i3-mk3s-reverse-bowden-set If…
Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
Just a plain beverage can, meant to be used with your own design!
This is a precision-engineered, snap-fit lid designed specifically for the standard aluminum rim of 7.5 oz soda can/12oz Comment if you would like me to add designs to these
I created a beverage holder that can hold up to 5 cans of your choosing. The design is a very tight fit so you may want to size up for cans to slide in easier. Will fit on a wheelchair that has a 1.25" rear bar Requires two zip ties to…
Syrup pump adapter for Sodasteam Say goodbye to messy syrup measurements with this syrup pump adapter! This adapter is designed for Sodastream beverage mix bottles with a 50mm diameter cap. It’s compatible with popular coffee syrup pumps…
Remix of mhparsons can dispenser sized for EuroCans
I got tired of having to label my beer at the in-laws so it didn't get accidentally taken. So i printed myself an beer organizer where if the beer is in the container, they know its mine. Enjoy
I bought a water/beverage dispenser and it came without a stand. I did not like having to put it on the edge of the table. But fate has granted me a 3D printer and some basic Blender skills. So here is my very own portable water dispenser…
Refrigerator Drawer Divider for LG Fridge Beverage Drawer Since the LG fridge only ships with one divider for the beverage drawer, the draw fits four, and they won't sell you any more, Davoxt saved the day with his model! (go show him…
Please use 100% infill.
Français Voici un fichier 3D qui vous permettra de recycler vos anciennes canettes, de coca par exemple. Il y a en fait 2 fichiers 3D : un à mettre sur les bords que vous aurez coupé dans la canette. Il est peu gourmand en matière et vous…
Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a very large beverage. Impressively given the…
This is a sign that has the Dr. Pepper Logo and says "King of Beverages," which is an old slogan of theirs. There are holes on the back for magnets that are 0.315 inches in diameter and 0.118 inches in height.
Pinball machine beverage holder mounts to 2-1/4" bolt spacing on front leg. Download is for the LEFT leg. Simply mirror along the Y axis in your slicer to print for the RIGHT leg. The beverage holder wraps around the leg and steps below…
Having received several bags of 2L bottles to turn into 3D printer filament but not looking forward to risking my skin on sketchy cuts, I set about creating a better way to cut the bottoms off the bottles. This is my first working…
In summer it is nice to refresh yourself with a cool drink. But on the glass jugs purchased, an iron lid was used. And it was poorly lacquered so it soon rusted. That's why I created a new lid for a beverage mug. It has a better thread…
Gedruckt in PETG mit dicken Wänden.
Warp into some fun with this video game inspired can coozie. Complete with a sturdy handle this print actually keeps your drinks cool with a thick insulating layer. Use lightning infill to have a air barrier between your drinks and the…
I got tired of spilling coffee and beverages on my desk when I accidentally knocked over a mug or glass. This stabilizes the cup/mug and saves your laptop and paperwork in the process. Includes a cutout for handles to sit securely. I also…
Simple Beverage Can Coaster Height: 4mm Perfectly fits typical beverage can
Remix of @mhparsons Beverage Can Dispenser to fit standard large USA cans (16 oz. / 1 pint / 473 ml). Versions for six cans.
I modified the excellent model by @mhparsons to fit smaller tonic cans. No supports are needed except for the front cross beam on the "Bottom-Front-150ml-Can-Dispenser" part. I printed at "Extra Draft" quality, which is good enough for…
This is wine glass I designed in Fusion. It requires minimal supports depending on the printer. It is also a beverage can holder! Drink your beverage in style.
This is a simple cap for your Beverage Can to protect against Insects. Always stay safe when drinking out of Cans without hidden wasps :-) You may want to use the attached gcode files created with Cura. They should work on any Prusa like…
I designed this rack to hold and dry the lids to cans after they have been dunked in Starsan ready for canning. I have printed in PLA with 0.3mm layer height with 5% infill.
If your paddelboard has some strings in front, nice, then it probably fits with ease. If these strings are very loose, problems can occur. BUT, I think velcro tape can help.
A Remix of @mhparsons five can beverage holder that has been widened for 19.2 oz cans. I don't see any strength issues with the wider design so far, will be monitoring for issues. This wider size is 8.17 inches wide x 13.16 inches deep x…
Smaller version of Beverage holder for metal frame garden pool
For places where there's just enough room for one more row of cans, but not enough room for the full height of the original model. The two pieces just barely fit on one 256mm square build plate together.
Perfect for the beach, couch, workbench, etc. This “cup holder” protects your Truly (or other tall-can beverage) from spilling and ruining your day. Don't have a 3D printer? Order already printed from:…
Are you tied of getting sand all over your tasty beverage container when you put it down at the beach? Well fear not for the solution has arrived! Introducing the Beach Beverage Buddy, otherwise known as the BBB. Just stick it in the sand…
This Planet Express Beverage Coaster is perfect for any Futurama fan! Designed with the iconic logo of the legendary delivery service, this coaster lets you pretend you've got a job with the most sometimes-successful delivery team of 31st…
This is meant to be placed in your cup holder to keep your drink higher than it is, making it easier to lift up. This is a 30cm elevation, scale up on the Z axis of your preferred slicer if you need it higher or lower.
I was enjoying some wonderful weather outside yesterday when upon taking a sip of my beverage from the can I discovered an unwelcome guest had stopped by for a visit. After frantically spitting out my stinging / biting foe I was…
Are you like me and bought a sim racing rig, but were too cheap to buy the shifter? Well, you're in luck because I can fill that empty space…with a beer holder! Enjoy! I used what would have been the shifter bolt to secure the cup holder…
Tired of struggling to carry crates on your bike? This 3D-printed holder provides a secure and convenient way to transport them on your luggage rack. Disclaimer: While it holds a crate, I am not responsible for any unexpected…
Made to stick on with adhesive tape.
Please like and follow and post your makes Print in a heavy infill I would do 50%+ and use a penny for reinforcement of where the bottle meets the opener.
Multi²Holder : Multi-Beverage : Works for Mugs, Cans, Bottles, Wineglasses & Multi-Location : The little latch can be attached to anything (Camping Chairs, Walls, 3D-Printers…) and the holder can easily be slipped on or off. Great for…
My Adirondack chair arms are sloped so drinks slipped off if you set them there, so I created this to hold beverages on the arms. (My chairs: https://www.amazon.com/gp/product/B00A7KJG58 ) I specifically designed this so that it can be…
This was used to create a beer "Lightweight Champion" award for a friend. I removed the text so it can be used to create your own design on the can.
This one-of-a-kind beverage barrel is perfect for your relaxing river and beach days while out camping this summer. This unique print holds an average 12 oz can of your choice and keeps it afloat while you relax poolside! It comes with a…
The space we use for a community meeting put in new flooring and we wanted to keep coffee drips off the floor. I designed this after trying to find drip trays to purchase, I found them overly expensive. This is the fifth iteration, I…
Connect 4 Beverage / Can Holder Meet the ultimate accessory for any get-together: the Connect 4 Beverage Holder ! This isn't just a standard koozie to keep your drink cool; it's also a classic two-player strategy game. It's designed to be…
My attempt to create Beverly Crusher from Star Trek, The Next Generation. You may need to resize to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print…
