Wyniki wyszukiwania: br

Sortowanie

64 836 modeli

P
PrintablesGabbox3D

Complete 3D Printer test all in one (stress test, bed level test, retraction test, calibration test, tolerance test, support test)

The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…

Pobrania
96 911
Polubienia
12 682
Ocena
4,89
P
PrintablesLoboCNC

Gravity Broom Holder

This easy-to-print broom holder uses a rolling gear and the broom's own weight to securely clamp it in place. Just lift the handle slightly as you push it in place to lift the gear, and then let it settle back down to lock in place. To…

Pobrania
86 872
Polubienia
29 432
Ocena
4,9
P
Printablesrorys3D

Sunflower fabric coaster

Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…

Pobrania
40 796
Polubienia
10 500
Ocena
4,94
P
Printablesfuchsr

Improved All-In-One Temperature and Bridging Tower -- Hi to Lo Temps, PLA/PETG/ASA/TPU/PCCF

Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…

Pobrania
37 580
Polubienia
5605
Ocena
4,91
P
PrintablesJamesThePrinter

Toothbrush Travel Case

A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…

Pobrania
32 718
Polubienia
10 295
Ocena
4,86
P
Printablescmh

Z offset calibration print

Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…

Pobrania
31 215
Polubienia
745
Ocena
5
P
Printablescodewarriorr

Toothbrush Travel Case print in place

Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…

Pobrania
24 394
Polubienia
6504
Ocena
4,89
P
Printablesguss67

Ethernet | RJ45 clip to secure/repair/fix broken tab

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…

Pobrania
21 963
Polubienia
7496
Ocena
4,84
P
Printablesfifindr

Hairbrush Cleaner

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…

Pobrania
14 279
Polubienia
3854
Ocena
4,9
P
PrintablesVC Design

Strong Corner Bracket

NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…

Pobrania
13 859
Polubienia
5155
Ocena
4,94
P
PrintablesExtrutim

Helix Test Cube / Filament Sample / XYZ Calibration

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…

Pobrania
11 972
Polubienia
1048
Ocena
4,93
P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Pobrania
11 350
Polubienia
450
Ocena
4,94
P
Printablessoozafone

Grabby the Claw - a quick calibration test for 3D printed action figures!

Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…

Pobrania
11 095
Polubienia
2415
Ocena
4,94
P
Printablesfifindr

Grease Tool - Z-Axis Lubrication

A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…

Pobrania
10 591
Polubienia
2752
Ocena
4,91
P
PrintablesPeter Farell

Skull Bride

(3/28/2024) Added a new 3mf version that is ridiculously subdivided. Dont think it changes it much. but if someone wants to give it a go. Its named the same VSKUL only its 31mb Its a stretch to say this is an original model. It's a scan…

Pobrania
9300
Polubienia
2361
Ocena
4,88
P
PrintablesKeeeal

NASA Fabric Hexagons

Inspired by https://www.jpl.nasa.gov/news/news.php?feature=6816 https://www.thingiverse.com/thing:2437081

Pobrania
8795
Polubienia
1179
Ocena
4,8
P
PrintablesPrusa Research

Extruder linearity correction calibration tower

This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA

Pobrania
8344
Polubienia
686
Ocena
4,88
P
PrintablesToby3D

Cute Mini Dogs - Many Breeds

Disclaimer : These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…

Pobrania
8282
Polubienia
1331
Ocena
4,79
P
PrintablesGabriel

OLD VERSION! All-in-One Calibration Cube 40x40x40

Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…

Pobrania
8112
Polubienia
1144
Ocena
4,94

Collapsing Broadsword (Print in Place)

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Pobrania
8072
Polubienia
1002
Ocena
4,85
P
PrintablesVC Design

Ultra Strong Corner Bracket - 5 Variations ( Parametric )

5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible

Pobrania
7751
Polubienia
3047
Ocena
4,93
P
PrintablesDomes

Toothbrush Case

Reduced size, edited for better fit in. Remixed from: https://www.thingiverse.com/thing:4569222

Pobrania
7634
Polubienia
852
Ocena
4,78
P
PrintablesWim V

Message in a Bottle (Brain Teaser)

We all know the ships in a bottle, but how do you put a (hard) printed message or even a 3D model inside a glass bottle? It can (almost always) be removed similar to the way it came in. Manual how to do this yourself is shared under […

Pobrania
6827
Polubienia
321
Ocena
0
P
PrintablesBP3D

Low Poly Dog (Golden Retriever Labrador) (Decoration) (No Supports) FIXED

The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958

Pobrania
6130
Polubienia
825
Ocena
4,88
P
PrintablesVC Design

Strongest Corner Bracket

Strong corner mount brackets. Mounted using screws d=3mm :)

Pobrania
6009
Polubienia
2215
Ocena
4,87
P
Printablestimqui

Connectors - Brio/IKEA Wooden Train Track

Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…

Pobrania
5738
Polubienia
799
Ocena
4,93
P
PrintablesAndrás Bognár

Minimalist Duplo - Brio, IKEA, Wooden Train adapter

Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…

Pobrania
5575
Polubienia
696
Ocena
4,96
P
PrintablesPrusa Research

Finger Brace (splint)

Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…

Pobrania
5574
Polubienia
1122
Ocena
4,83
P
PrintablesPrusa Research

Wrist brace (splint) - a lighter version

Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…

Pobrania
5393
Polubienia
1261
Ocena
4,95
P
PrintablesBrolin Workshop

Prusa Mini Z-axis brace

Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…

Pobrania
4880
Polubienia
985
Ocena
4,93
P
PrintablesUkrutony

Bike disc brake spacer

Hello, I know you have been given disc brake spacers with your new bike and I also know that you have lost them. So have I :) But no worries. They are easy to print :) This simple spacer should work with both Shimano/SRAM (Avid in my…

Pobrania
4326
Polubienia
478
Ocena
4,94
P
PrintablesPrusa Research

Finger extension brace (splint)

Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…

Pobrania
4158
Polubienia
987
Ocena
5
P
PrintablesM4NU

Unchain My Heart - Print in place bracelet

A simple and fast printed bracelet with heart looking rings and a simple lock system. 3 sizes : 170mm (11 hearts) 200mm (13 hearts) 230mm (15 hearts) Some ideas : Print 2 sizes to make intricated bracelets. Clip several bracelets together…

Pobrania
3736
Polubienia
686
Ocena
4,78
P
PrintablesKalleKnall

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

Pobrania
3396
Polubienia
712
Ocena
4,8
P
PrintablesCelta

Toothbrush & Toothpaste Holder

A 3D Printed Toothbrush and Toothpaste Holder. This holder offers a stylish and convenient solution to store and display your oral care essentials in an elegant manner. Designed with both functionality and aesthetics in mind, this holder…

Pobrania
3361
Polubienia
838
Ocena
4,91
P
PrintablesDJ

Phone holder/bracket for monitor

GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…

Pobrania
3359
Polubienia
1798
Ocena
5
P
PrintablesPrusa Research

Wrist brace (splint) for either hand

Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…

Pobrania
3297
Polubienia
893
Ocena
5
P
PrintablesMikolas Zuza

PSU replacing brace for MK3

If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports

Pobrania
3232
Polubienia
192
Ocena
4,89
P
Printablesdarkamikaze

Tool Holder for Anycubic Kobra

Tool holder that fits the tools provided by the Anycubic Kobra. It also has a place for calipers and a small container for anything that can fit in it (I store a multi utility tool on it)

Pobrania
3088
Polubienia
257
Ocena
4,73
P
PrintablesGreenBit

Updated! My Prusa Slicer profile for Anycubic Kobra 2 Pro

This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…

Pobrania
2988
Polubienia
71
Ocena
4
P
PrintablesHeart Labs

HAIRY Brush - Mini

HAIRY Brush - Mini Modeled after our HAIRY Brush line , the mini version packs all the features the big ones come with and is here for you to try out for FREE ! More information about the whole set and its features you will find under…

Pobrania
2951
Polubienia
858
Ocena
4,93
P
PrintablesPeter Farell

Zen Bridge and Temple

Zen Bridge and Temple. Print separately. Size to your preference.

Pobrania
2788
Polubienia
964
Ocena
5
P
Printablesashurexm

PLA Short Smart Compact Temperature Calibration Tower

Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…

Pobrania
2746
Polubienia
71
Ocena
4,86
P
PrintablesPrusa Research

Palm brace (splint)

Palm brace (splint) For fixating the wrist and palm (metacarpal fractures). The brace must be shaped into a neutral position, to prevent the shortening of tendons and ligaments and placed on the FRONT side of the forearm (see picture). If…

Pobrania
2653
Polubienia
714
Ocena
5
P
Printableslord_edel

Simple yet elegant toothbrush holder/ hanger

Inspired by the toothbrush-chaos in most of the shared appartements I know, I wanted to design something that would solve that issue in the most simple and effective way possible while also being space saving and elegant to look at. It is…

Pobrania
2639
Polubienia
421
Ocena
4,97
P
PrintablesPYC3D.ES

UMBREON POKEMON KEYCHAIN

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE UMBREON POKEMON KEYCHAIN Embrace the dark elegance of Pokémon with the 'Umbreon Pokémon Keyring'. This 3D model intricately captures Umbreon, the enigmatic Dark-type Eevee evolution, in…

Pobrania
2455
Polubienia
432
Ocena
4,77
P
PrintablesMehTechArt

Porsche 919 Hybrid Le Mans Wall-mounted

Please click if you appreciate my work :) Silence broken only by hybrid fury. This wall-mounted 3D printable model of the Porsche 919 Hybrid pays homage to the three-time Le Mans champion. With its centralized cockpit, wide aero arches,…

Pobrania
2430
Polubienia
680
Ocena
3
P
PrintablesGlennovitS 3D

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Pobrania
2392
Polubienia
500
Ocena
4,86

Bridge and overhang test

this is a model I created to test out longer bridges and large overhangs

Pobrania
2226
Polubienia
76
Ocena
4,77
P
PrintablesPrusa Research

Pinky finger/thumb brace (splint)

Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…

Pobrania
2125
Polubienia
544
Ocena
5
P
PrintablesSEARS

XBox controller and headset wall bracket

Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games

Pobrania
2067
Polubienia
227
Ocena
4,91
P
Printables3D Printy

Brick Block Puzzle Box

A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…

Pobrania
2024
Polubienia
699
Ocena
5
P
Printablesdtoux

Philips Hue Bridge Bracket

This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Pobrania
1993
Polubienia
291
Ocena
5
P
Printablesbkerler

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Pobrania
1961
Polubienia
222
Ocena
4,92
P
PrintablesDaniel

Brio Wooden Train Bridge Support (Stackable)

I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…

Pobrania
1917
Polubienia
256
Ocena
4,91
P
PrintablesLucky

Flexi Dino Brachiosaures V2

Flexi Dino Brachiosaures V2 pour compléter votre collection. D'autres Dino… sont disponible.

Pobrania
1816
Polubienia
198
Ocena
4,81
P
PrintablesTechNerd

Toy Train BRIO / IKEA compatible

I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…

Pobrania
1800
Polubienia
647
Ocena
4,88
P
Printablesjoeworks

FLSun V400 Layer Calibration Test

Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…

Pobrania
1796
Polubienia
87
Ocena
5
P
Printablestakman29

KUMATY : "Celebration" Pack

-All models require no supports. -Balloons and Garland are printed separately. -Polar bears have a hole on their hands to put Balloons or Garland in. -All bears were painted with acrylic paint. -2 versions for all bears (with/without…

Pobrania
1788
Polubienia
581
Ocena
4,97
P
PrintablesZimlorog

Vallejo, Army Painter, Reaper Paint and Brush Holder

Paint bottle holder designed to fit Vallejo, The Army Painter, and Reaper MSP paints. Each brush or tool slot has a cutout for easy cleaning if things get messy inside; it also helps fit The Army Painter triangular brushes. This model has…

Pobrania
1737
Polubienia
254
Ocena
4,95
P
PrintablesMich

Glasses Broken Frame Replacement

Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…

Pobrania
1735
Polubienia
260
Ocena
5
P
PrintablesJoeBranch

Milwaukee Packout Wallmount Bracket

I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…

Pobrania
1689
Polubienia
312
Ocena
5
P
PrintablesART TOO

SHELF BRACKET - SHELF HOLDER - (Tested)

Super strong shelf bracket, perfect to store your tools 3 sizes, let me know if you want an other size !!!

Pobrania
1611
Polubienia
830
Ocena
5

Ultimate Ender 3 Bed Level Calibration Grid (ABL workaround)

Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…

Pobrania
1591
Polubienia
61
Ocena
4,75
P
PrintablesNight Raid

Medieval Dragon Embroidered Goblet / Chalice (Game of Thrones / Rennaissance style) Fully Functional and Support Package Included

To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…

Pobrania
1582
Polubienia
380
Ocena
4,75

Bed Level Correction Calibration

Bed Level Correction Calibration Model for the Prusa Mk3/S. Instructions how to calibrate, see: https://help.prusa3d.com/article/TPGip0OmaP-bed-level-correction

Pobrania
1572
Polubienia
38
Ocena
4,92
P
PrintablesHappyAtom

Electrical Bracket for Drywall | Old Work Low-Voltage Box | 1-Gang

If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…

Pobrania
1570
Polubienia
248
Ocena
4,89
P
PrintablesMehTechArt

Heavy-Duty Reinforced Corner Brackets

Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…

Pobrania
1566
Polubienia
805
Ocena
5
P
Printablesbkerler

MK4S w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…

Pobrania
1521
Polubienia
214
Ocena
5
P
Printablesdjedje_zr7

Wall Toothbrush Holders

Use strong double-sided adhesive tape to stick it on the wall

Pobrania
1466
Polubienia
270
Ocena
4,61
P
PrintablesTechNerd

Toy Train BNSF locomotive BRIO / IKEA compatible

BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…

Pobrania
1463
Polubienia
455
Ocena
5
P
PrintablesArtyL

First Layer Calibration Creality Ender 3 / Pro

Thank you to GKMAKEIT for the original. I found this so helpful at getting the perfect first layer setup that I found myself using for all different types of materials - I have now remixed it for use on my Ender 3. In Summary, you adjust…

Pobrania
1459
Polubienia
57
Ocena
5
P
Printablesddded

Updated OpenSCAD library for HSW attachments

UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…

Pobrania
1455
Polubienia
237
Ocena
4,25
P
PrintablesCreative MinerX

Circles puzzles - Brain teaser

Very nice looking, circles shaped puzzle. Consist of 28 pieces in three colors. Hint: The solution is engraved in on the back side, so you can't lose the solution. :-) Enjoy your time!

Pobrania
1402
Polubienia
315
Ocena
4,96
P
PrintablesCraftswoman.cz

34 Snowflake silhouette collection with hanging loops / Kolekce sněhových "obrysových" vloček s očky / Schneeflocken

A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…

Pobrania
1402
Polubienia
240
Ocena
5
P
PrintablesCVD

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Pobrania
1376
Polubienia
250
Ocena
4,88
P
PrintablesPeter Farell

Broly : DragonBallz

Broly : Dragonballz

Pobrania
1361
Polubienia
233
Ocena
5
P
PrintablesART TOO

LEGO Brick - Bricks TESTED

How to print: Use inner and outer brim !!! If your printer has issues with overhang, make shure to ad support force as shown in the picture. Make shure to use qualitative filament.

Pobrania
1343
Polubienia
318
Ocena
4,8
P
PrintablesMakkuro

Compliant mechanism toothbrush holder

A perfect gripper to hold your toothbrush, realized using a compliant mechanism. It prints fast (16 minutes), needs only 2g of filament. Its print-in-place, no supports are needed. Its automatically gripping your toothbrush and only…

Pobrania
1343
Polubienia
430
Ocena
4,3
P
Printablestbutters

Chainmail - 3D Printable Fabric - Modified for Prusa Mini

This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…

Pobrania
1339
Polubienia
135
Ocena
4,79
P
PrintablesSheepMe!

PC Extension Card Slot Brackets in 30 Variation for Standard and Low Profile

Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…

Pobrania
1334
Polubienia
679
Ocena
4,75
P
Printablescgillstrap

Brio - Mechanical (Geared) Interchange/Switch - M1 Track

Overview I had downloaded and printed some of the switches for brio as my son has several powered trains that need a guide. The issue with those is that the stick that comes out of the side blocks cars or ships on his playset and there…

Pobrania
1319
Polubienia
273
Ocena
4,52
P
Printablescadandcookies

FRC Main Breaker Shroud

This is a shroud for the FRC main breaker that protects it from unintended contact. It is designed to be printed with no supports, and then directly threaded into by ¼-20 hardware. Printing this in a high visibility color (like bright…

Pobrania
1315
Polubienia
43
Ocena
5
P
PrintablesPrusa Research

Otto the Calibration Butterfly

Otto, the Calibration Butterfly, is a test model designed for Prusa CORE One+ INDX. We wanted to have a test model that you will not throw away after printing and assessing its quality. It is best to print Otto as a first print, right…

Pobrania
1306
Polubienia
220
Ocena
4,94
P
PrintablesJADV

IKEA LACK table strong and robust reinforcement bracket

Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…

Pobrania
1253
Polubienia
236
Ocena
4,97
P
Printablesnikoladeon

Electric Toothbrush Holder for a family (2x Philips Sonicare + 2x Oral B)

Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…

Pobrania
1238
Polubienia
143
Ocena
5
P
Printableskrisvda

Triple & quadruple gravity broom holder + gear for smaller diameter broom sticks

A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…

Pobrania
1236
Polubienia
164
Ocena
4,81
P
PrintablesOhio

Anycubic Kobra Cooling Fan Duct

My first attempt at merging two different fan ducts into one to create a better cooling duct for my Anycubic Kobra. I have uploaded a “2mm offset” version of the stl file, in that file I nudged the main duct portion 2mm to attempt to find…

Pobrania
1234
Polubienia
101
Ocena
4,71
P
PrintablesSebastian

Fix broken SD Card (3d-print plastic hull)

Use this sd card hull if your sd card has physical damage and is unreadable or not recognized by the pc. A while back the plastic hull of my sd card broke and it was no longer recognized by the pc. Using this model I was able to put the…

Pobrania
1227
Polubienia
68
Ocena
4,67
P
PrintablesPrusa Research

Big toe brace (splint)

Big toe brace (splint) Not suitable for walking! The brace is neither sturdy nor comfortable enough for that - only for fixation, but without stepping on the injured foot. For pain relief from non-dislocated fractures of the first or…

Pobrania
1209
Polubienia
426
Ocena
5
P
PrintablesGeekMomProjects

Print In Place Rotating Hearts Bracelet

A great print for Valentine's Day! The uploaded models of the bracelet have two sizes: 6 links (approximately 190 mm, 7.5") 7 links (approximately 215 mm, 8.5") You can remix the model to add more links or change the heart to a different…

Pobrania
1203
Polubienia
269
Ocena
4,91
P
PrintablesTijnoz

Unifi AP AC-LR mounting bracket

Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…

Pobrania
1190
Polubienia
66
Ocena
5
P
PrintablesGP

Table angle bracket / corner brace (LACK-compatible)

Light tables like IKEA LACK family are not sturdy enough to withstand horizontal vibrations caused by a printer, they start shaking and wobbling worsening print quality, causing even more ringing, etc. This simple brace will make a table…

Pobrania
1189
Polubienia
196
Ocena
4,88
P
PrintablesShmoee

Friendship Bracelet Maker Braiding Loom

These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…

Pobrania
1166
Polubienia
163
Ocena
4,88
P
Printablesdtoux

Philips Hue Bridge Bracket v2

This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Pobrania
1120
Polubienia
127
Ocena
4,79
P
PrintablesAlgernon

Airbrush stencil ST-TX007-wood-texture-num2-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Pobrania
1115
Polubienia
246
Ocena
5
P
PrintablesTperroneDesign

Friendly Articulated Brain

Great original models by Molodos and Oak . I combined the two models to make a Friendly Articulated Brain with arms and legs. Note: Prints well at 75% if you want to go smaller. Share a picture if you print one!

Pobrania
1113
Polubienia
164
Ocena
5
P
PrintablesJakub Starý

Bruni the Fire Salamander Frozen 2

Postavička z Ledového království 2 Zdroj z Thingiverse: DMag24 https://www.thingiverse.com/thing:4041259 Barveno akrylýtovými barvami

Pobrania
1098
Polubienia
140
Ocena
4,92
P
PrintablesPYC3D.ES

BROKEN HEART PENDANT KEYRING

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE BROKEN HEART PENDANT KEYRING This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain…

Pobrania
1073
Polubienia
148
Ocena
5
P
PrintablesSarusani

Hydraulic Disc Brake Alignment Tools

Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…

Pobrania
1068
Polubienia
156
Ocena
5