64,829 models
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
XYZ Callibration Cube 20x20x20 Created long time ago with help of tutorial below but i used F360 instead: https://www.idig3dprinting.co.uk/news/how-to-guides/create-a-3d-printer-calibration-cube-in-freecad/
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
My MK3 printer stands on an Ikea Lack table, which is an excellent amplifier for the vibrations of the printer. So I designed these feet, and they do a good job without making the printer too wobbly. A low profile version and a small…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…
These coasters are very flexible. They are made using my version of 3D printed “fabric” and it's also the first time I publish the “fabric” itself. If you dare, you can split the pieces in slicer and form a new ornament ;). There are 3…
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Originally I have designed this to hang the broom at the wall but this mount can also be useful to attach any tools with cylindrical handles. I know it sounds a lot easier just to drill a hole to the broom handle and hit a nail into the…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
(3/28/2024) Added a new 3mf version that is ridiculously subdivided. Dont think it changes it much. but if someone wants to give it a go. Its named the same VSKUL only its 31mb Its a stretch to say this is an original model. It's a scan…
Inspired by https://www.jpl.nasa.gov/news/news.php?feature=6816 https://www.thingiverse.com/thing:2437081
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Reduced size, edited for better fit in. Remixed from: https://www.thingiverse.com/thing:4569222
We all know the ships in a bottle, but how do you put a (hard) printed message or even a 3D model inside a glass bottle? It can (almost always) be removed similar to the way it came in. Manual how to do this yourself is shared under […
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
I recommend printing it a bit bigger so it doesn't fuse together
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958
Strong corner mount brackets. Mounted using screws d=3mm :)
Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
All forbidden bricks !!! Comment wich other types you want to see !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
I was board and decided to challenge myself with this project, this is not my own idea i just copped the design from someone on "Printables". This was a decent challenge but i have made things that are harder to design, it was still…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…
This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…
(IMPORTANT) Please download the User Guide for HULA v1.0. I do my best to double-check and test the print profile I created. They are up to date with the latest changes made to the designs. If you wish to purchase ready-to-use HULA feet…
With this model you can test 6 different distances: 10mm 20mm 40mm 60mm 80mm 100mm Update 1: Added a Material Saving Variant (But this Variant is more fragile)
this is a lego compatible brick that has been made to be easier to print, as there are no small holes on the underside, which make it require supports. this version instead uses a bridge, so most decent printers can print this with ease.…
Based on my basic Brio rails [1], I created flexible/bendable rails in three different sizes (S, M, L). I find these rails pretty helpful, as sometimes you just need on little rail that's missing and with these flexible rails, you can…
The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…
A 3D Printed Toothbrush and Toothpaste Holder. This holder offers a stylish and convenient solution to store and display your oral care essentials in an elegant manner. Designed with both functionality and aesthetics in mind, this holder…
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
All forbidden bricks !!! Comment wich other types you want to see !!! Don't forget to check illegal bricks 1.0 !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
I wanted a stronger lack bracket. Print instructions 40-50% infill 3 Walls I use PETG, and 0.3mm layer height. 4 x 25mm screws works fine.
Tool holder that fits the tools provided by the Anycubic Kobra. It also has a place for calipers and a small container for anything that can fit in it (I store a multi utility tool on it)
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
All forbidden bricks !!! Comment wich other types you want to see !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
Projectvideo: My 5yr old asked me if I could make him a ring he could use with his LEGO bricks, so I designed him this Brickring. I also made it in various sizes from 15-21mm Subscribe or follow me on: YouTube:…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE UMBREON POKEMON KEYCHAIN Embrace the dark elegance of Pokémon with the 'Umbreon Pokémon Keyring'. This 3D model intricately captures Umbreon, the enigmatic Dark-type Eevee evolution, in…
Look there is a zebra in the wild!… Oh no, it is just a plant pot. But it looks amazing! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
The source marked this model as adult content.
This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…
Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…
Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…
Super Mario Brothers I've added a thicker more rigid V2 model for free-standing use/display. If you're placing Mario & Luigi on a wall, you might want to use the V1 model to save some filament. Tip: The tab on the bottom is designed for…
This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…
A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Flexi Dino Brachiosaures V2 pour compléter votre collection. D'autres Dino… sont disponible.
I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…
-All models require no supports. -Balloons and Garland are printed separately. -Polar bears have a hole on their hands to put Balloons or Garland in. -All bears were painted with acrylic paint. -2 versions for all bears (with/without…
test the quality of your prints by printing a cali dog
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
a 2x4 lego brick made from the original 2x6high.
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…
It was printed with 0.6mm nozzle but smaller the better. I recommend using PETG, but it works with any prusament just fine. :D *updated: V2 version added
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…
Modified original Pro profile to PETG, works pretty well.
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
How to print: Use inner and outer brim !!! If your printer has issues with overhang, make shure to ad support force as shown in the picture. Make shure to use qualitative filament.
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
Overview I had downloaded and printed some of the switches for brio as my son has several powered trains that need a guide. The issue with those is that the stick that comes out of the side blocks cars or ships on his playset and there…
This is a shroud for the FRC main breaker that protects it from unintended contact. It is designed to be printed with no supports, and then directly threaded into by ¼-20 hardware. Printing this in a high visibility color (like bright…
Otto, the Calibration Butterfly, is a test model designed for Prusa CORE One+ INDX. We wanted to have a test model that you will not throw away after printing and assessing its quality. It is best to print Otto as a first print, right…
This is a remix of 3aDri's Oral B toothbrush stand . I found that the peg was a bit too tight for my Pro 6000 toothbrush, so the stand would stay attached when I picked it up. I shortened the peg and then made adjustments to the pedestal…
The Brandenburg Gate is one of the landmarks of Berlin and one of the most important symbols of Germany. It stood like no other for the division of two states and became a symbol of unity. Its history, however, dates back to the reign of…
This is a remix of the original Prusa Mini Z-axis brace published by Hannes-b3 Small groove to fit with the Prusa Mini Low Profile Z axis Squash Ball by 4nthonylin Bigger holes to fit with M5 Hex Socket Head Cap Screws Added model Ultra…
NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
My first attempt at merging two different fan ducts into one to create a better cooling duct for my Anycubic Kobra. I have uploaded a “2mm offset” version of the stl file, in that file I nudged the main duct portion 2mm to attempt to find…
Use this sd card hull if your sd card has physical damage and is unreadable or not recognized by the pc. A while back the plastic hull of my sd card broke and it was no longer recognized by the pc. Using this model I was able to put the…
