Liczymy pasujące modele…
These are some butane lighter refill adapters/nozzles. The nozzles that came with the can of butane never fit my lighters quite right, so I made my own. I had the best results when they were printed with a 0.25mm nozzle. Note that there…
The Thermacell Butane cartidges are notoriously impossible to refill - forcing you to buy the refill cartidges. This is an adapter piece designed to utilize standard butane recharging cans. The adapter is designed to depress the valve in…
I bought a Coleman butane bottle but the nozzle didn't fit anything I owned. This nozzle fits a TOPKAY torch lighter, but is also fit a different Lotus butane lighter I had as well.
Lighters don't have a refill valve that is the right size. This is really annoying because then you need an adapter to fill your lighter. I tried out a bunch of different ones out there and I found that most of them did not work. So I did…
-Preguntar cualquier duda del modelo, sígueme para ayudarme a crear mas modelos, un saludo amig@. Feliz impresión 3d !!!
Cap for butane-propane camping tank. It is good to cover valve of your butane tank to protect it from getting dirty. This is simple cap designed for Coleman C500. But it should fit on any similar tank. If you want to modify this you can…
Print a few colors to keep track of which tanks are full and which are spent! My prints in 0.28 layer height were just right for a secure fit without getting stuck. If the fit is on the tight side turning with the threads will probably…
I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…
Put your torch on your board. Used this mount below and added slots for Multiboard pegs. I also added a registration line on the pegs so when you glue them on, they can be the same. Print and glue. Use super glue or Gloop, that is what I…
this is a conversion for a m4a1 Sherman with cast hull into a Israeli ambutank. STL include a new turret now engine bay, rear bay, stowage boxes, and extra handles for when they inevitably brake off. WARRNING this conversion requires some…
A stand to keep an EAGLE butane torch upright. I haven't tried any other torch, so am unsure if it will fit others. I like a tight fit, so It's tight. I usually heat it up a little and press it on.
Palet para botellas de butano de uso domestico tipo Repsol escala 1/10 Ideal como accesorio para Rc Forklift Onyx:
Donate if you're pleased with my work i'll appreciate it! Every donated buck will be spended for printing materials and hardware.
Simple stand for butane torch that attaches to an 8oz (227g) or 8.8oz (250g) butane canister. Without the stand the torch tends to be front-heavy and tips over easily. By adding the stand everything is nice and solid. Can should be a snug…
Updated 14 August 2024: Added a wider version of the small loop, and a new larger loop. The original was made for the smaller size of butane type fuel canisters used by Jetboil, MSR, et al. Advertised can capacities are ~100g and ~230g…
Couldn't find a torch holder for the highly popular Sondiko torch, I like my stuff on pegboard and my hex wall. designed so NO supports needed. I have 2 files, blank back and a 2 hole mount. Glue pegboard pins or hex on blank back. 2 hole…
TWO PIECE: Threaded pieces making a space for storage or a hand warmer. ONE PIECE: Basic protection and insulation. Meant to slide right over the top of the fuel canister with an opening wide enough for the nozzle and a cap (eg, this cap…
For use with TorchBlue butane lighters (and other similar brands). Has a spot to glue in an optional 6x2mm magnet. Positioned where a tiny screw is on the torch, to give it a little extra holding power. Does it really help? 🤷 I left the…
Got given a butane gas torch with no knob So I made a replacement Knob and still going strong
This will hold the small handheld BernzOmatic torch & a can of butane (Scripto 9.59oz). Everyone likes options so there is a left and right orientation for ya.
*update* I found out the original version was to loose on my other one and would slide straight through making it unstable, so version 1.2 has a small base to prevent this. Have left the original just in case anyone wishes to use it A…
⚠ HOW TO USE SAFELY ⚠ hold the adapter like a syringe with your thumb at the bottom, then squeeze and ignite 2-4 inches away from adapter. kinda weak so print at 25-40% infill for best results. please give feed back, as i am constantly…
This is a dedicated holder for the Sondiko Butane Torch , remixed specifically for the IKEA Skadis pegboard system. It keeps your torch upright, accessible, and securely mounted to your workspace. Remix Information This is a remix of the…
A convenient 1x1 Gridfinity holder for your Butane Fuel from Zippo. I had this sitting on my desk, but then… Gridfinity! Everyone loves a new Gridfinity. You can print these pretty light (5% infill) and I did this at very big layer…
My butane torch came with a hot air blower/soldering tip accessory, but no way to keep it together with the torch, so I designed and printed this clip so the accessory doesn't get separated and lost. My torch is a Bernzomatic ST2200, but…
Once the original breaks off, you are left with a brass stub. This knob slides on and is secured with the existing screw or a spare short m3 screw you may have laying around. Printed in PETG and PLA, both have worked well.
Replacement cap for Butane Canisters commonly used with camping stoves
Holder for small ø30 mm butane torch. Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ
I designed and use this soldering iron station almost everyday. Does the job. A dab of CA glue to adhere the cap to the fitted barrel. Be mindful about leaving a heating iron in the holder…
Butane Torch Multiboard Pushfit Holder - 63mm Use Multiboard Print Settings, 3 walls, 15% infill etc.
Simple Gridfinity bin for a cheap butane torch lighter many use in their workshop or for projects. This particular one is branded as "TECHNO", however I'm fairly certain there are multiple brands this style of lighter goes by as they're…
Gridfinity 1x1 holder for butane torch. Measures 27mm diameter and 75mm depth.
I was tired of hearing my fuel canister bounce around inside of my ultralight backpacking cook kit so I printed a TPU ring to go around the canister base, it deadens the sound and adds extra grip while cooking on smooth surfaces. I…
Not sure they even sell these anymore but I've got a couple of them so I figure other people might too. You used to get them from the big box stores under the name "MagTorch Micro Flame Butane Torch" though I suspect they get rebranded a…
this fixture is used in my outdoor kitchen in my rv holds 2 butane cans and 2 pam cooking spray cans its held in place wih small strong magnets
Filament: PETG Layer: 0.2 Print vertical, needs support, organic works great.
This is a Butane Torch Base to keep your "String Smoker" standing upright on your bench. It adds some height so the torch fits nicely in the hand while using it.
a track for a moving butane vapor flame with splitting, untested.
Not perfectly balanced but does the trick.
I created a holder for the sondiko butane torch S907 for the ikea skadis wall. Support is required for the hooks. Print settings: Infill: 10% gyroid Layer height: 0,2 mm Filament: Prusament PETG
This is a shelf, designed to attach to a Multiboard panel, that holds 2x, 110 gram Isobutane camp stove fuel cans (jetboil, pocket rocket, etc) - I have 2 versions. 1 that uses the small-thread fix point bolts, and a 2nd version that uses…
A Gridfinity bin for the Zippo Firefast Butane Torch.
Remixed Disturbed Llama3D's stl.
Wall-Mounted Butane Canister Holder (Heavy-Duty / Parametric) A rugged, wall-mounted storage sleeve engineered specifically for standard 67.65 mm nozzle-style butane canisters (Gas One, Chef Master, Coleman, Sterno, and standard 8 oz /…
Material: PLA/PETG Layer Height: 0.10 Infill % : 30 Supports: None Print Orientation: As modeled (prints with text upside down) To use, slide the lock into the recess below the button. Remove to use the torch.
I broke the base of mine so needed a replacement. Uses original screws and should be a nice fit. Also changed the shape some to be a little more stable. You can find the torch here: https://a.co/d/gZIHpr1
Lighter purchased in Base Warehouse Australia: https://thebasewarehouse.com.au/products/lighter-gas-blow-torch-refillable-freedom-designs If you have this model (or very similar looking model) of Butane Lighter, this case perfectly grips…
I wanted to put my torch on my wall, but couldn't find any models for the RAVS torch, so I made my own! If the clip is too tight, I've included the .f3d Fusion file for you to make changes. The design is parameterized, so increasing the…
Butane is the four-carbon alkane found in lighters and camping stoves. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton and…
1-Chloro-4-iodobutane (C4H8ClI, CAS 10297-05-9) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every atom carries its engraved element symbol, so no colour key is needed. Teachers who print molecules…
I was tired of hearing my fuel canister bounce around inside of my ultralight backpacking cook kit so I printed a TPU ring to go around the canister base, it deadens the sound and adds extra grip while cooking on smooth surfaces. I…
This is a shelf, designed to attach to a Multiboard panel, that holds 2x, 110 gram Isobutane camp stove fuel cans (jetboil, pocket rocket, etc) - I have 2 versions. 1 that uses the small-thread fix point bolts, and a 2nd version that uses…
Gridfinity 1x1 holder for butane torch. Measures 27mm diameter and 75mm depth.
I did not like the idea of shoving metal rods in my expensive lighter to purge the butane before refill, so I made this tool. Material: Any Infill: 15-20% print: standing up P.S. Added compact flat model if you need a longer snout let me…
Created this as the case that comes with the Dremel Butane iron kit keeps falling apart on me, and doesnt have room for extra solder and heatshrink, This is to suit the Dremel Kit (F0132000JA) and the Slim, half width packout case. You'll…
A 68mm internal diameter Multiboard Pushfit holder for cans or bottles of your choice. Use Multiboard print settings, 3 walls, 15% infill etc.
A replacement guard for the TBTeek butane torch! This may fit other torches that have a similar profile. Will include the STEP file in case someone needs to make alterations!
With this adapter, you can refill a gas lighter using a cassette-type gas canister. I recommend using PETG or ABS.
A couple of minor mods for the common-place Hot Devil butane torch. A nice solid base, and a big knob to allow for one-handed use.
A Skadis mount for Lexivon Butane soldering tool and accessories. Uses t-nut mod from 6d6178 (https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards). Soldering tool: https://amazon.com/dp/B07M9ZKK9T
Slip on belt to hold filling adapters. Filament: TPU Layer: 0.2 mm
Gridfinity Butane torch holder is a 1 x 3 with standard magnet slots
Nothing fancy, just a simple base for a small handheld butane torch. Circumference of mine at the base is 30mm
The Airhorn2Arca adapter is inspired by this thread on backpackinglight.com. Ultralight backpackers always look for ways to shave a few grams off their gear. With that in mind, even the smallest commercially available butane canister is…
I'm a huge fan of the Gridfinity organization system, and I also have a butane blow torch that I use for burning and melting the strings off of my prints, and there wasn't a convenient holder already available for it and it's flared…
Remixed to add a cutout for pegboard pegs. Peg model is included. Print the pegs flat with supports
A simple way to get my torch away from the kids! Prints easily with a dovetail assembly without adhesives.
*Additional* now comes with a stand with or without grip https://www.printables.com/model/747091-star-wars-imperial-logo-butane-soldering-iron-stan A Light saber Butane Soldering Iron Grip-for 25mm diameter x 97mm high tube. obviously you…
2 files included -one 25mm diameter for standard butane soldering iron -one to fit the lightsaber grip handle https://www.printables.com/model/745373-lightsaber-butane-soldering-iron-grip
The Catch is a little bit wider. The two holes are 2,7mm so you can use two M3x10 screws.
As I am using a roasting/flamer tool, which attaches to the MSF-1a burner, the whole system gets very front heavy and does not support itself. So I was inspired by my other cooking torch, which has a nice stand and replicated the same…
A fuller cap for standard camping butane canisters. Helpful for color coding canisters: full, used, and empty!
