Liczymy pasujące modele…
Corner mount for tapo camera C520WS C510W I made the model so the camera holes fit in those models, if you need any other size just let me know or remix it. I've also added a PDF with the 1:1 scale of the entire thing, just print it on an…
Wydruk około 7,98 €–9,76 € nettoWstępna wycena jednego wariantu
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! The thin ring front means you can see the LEDs on the camera when they're on whether the cover is opened or closed. This uses a print-in-place…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
A box to contain an arduino nano connected with a rc522 rfid module. Not Fully satisfy by Dgoma box design ( http://www.thingiverse.com/thing:1413827 ) I decide to make my own. Like Dgoma I could only recommend the Miguelbalboa's work for…
Make sure you have everything wired correctly before pushing the cover in, disassembling is a bit tricky, used small tolerances.
Hanging brackets made for M3 screws. I recommend having the bridges and supports set up properly beforehand. Added version of bottom piece with screw holes inside.
This is a case to hold the RFID sensor. The leads protrude from the back and can be plugged into a breadboard easily. I made it to hold my DIY Prototyping projects. It also supports Inventr.io kits. It snaps together and can be plugged…
This is case for MFCR522 RFID reader and Arduino Nano. It's part of a bigger project you can find on GitHub . The other parts are Arduino firmware and C#/.NET library for communicating with the reader trough serial port. Print…
Rohový držák pro kamery TP-Link Tapo C520WS. Díry pro upevnění kamery pro vyřezání závitu M4. Corner bracket for TP-Link C520WS camera. Thread cutting holes M4.
This is a Remix, but i can´t find the Original Post. A simple Webcam mount for my Prusa i3 MK3s and the Webcam Logitech C525. You need to disassemble the webcam housing, but that is not too difficult and saves a lot of space. If you want…
Enclosure for the popular rc522 module. A ring indicates the location of the antenna. To be mounted with double sided adhesive tape (like for bathroom mirrors). There are extra areas to apply the tape on the back side. Thereby it can be…
Corner mount for Tapo cameras - C520WS (likely for C510W C500 C530WS too). Enough space within to hide the cables.
Pignon de remplacement pour l'imprimante HP C5280 qui a tendance à se fissurer avec le temps. A imprimer tel que dans le fichier Replacement gear for the HP C5280 printer that tends to crack over time Infill 100%
držák pro kameru TP-Link Tapo C520WS material ABS
Made this privacy cover for my Logitech C525 webcam. It consists from two parts and does not require any screws or additional materials, just print. Print holder facing lens part down (as shown on one of the images) with supports, so…
A simple Cam holder for Logitech C920 for Sovol SV06. Its a modified C920 Cam. I removed the monitor mount.
Keychain Hymer Camp C524 RV
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
I wanted to use an old Logitech C525 I had laying around for use with my Octoprint setup. The easiest thing I could think of was to simply print an adapter that would let me mount the webcam securely to a standard tripod.
Recommended to print in TPU for a tighter fit, but PETG and PLA will also do. UPDATE 2025-07-12 - Increased depth of the lid for a tighter fit
Print with normal snug supports, magnets holes on top, as supplied in the files. for the magnets, you'll need: • 4* disc magnets, 20mm * 5mm, with 5mm holes • 4* M4 10mm countersunk bolt screws (a bit more than 10mm can fit as the Tapo…
A box to keep the cables out of sight and that can be user as a base for the camera. I only printed it em PLA to test fit and it was ok. Will post photos of the aplication soon.
Mountable cover for a RFID RC522 module. Screw holes are 3mm in diameter. I mounted this in lauan plywood for an escape room puzzle. I wanted to make sure the module was as close as possible to pick up the RFID tag. Most models I saw were…
This is an easy remix of fasteddys “hinged privacy shutter for a Logitech C615 webcam” to fit on logitechs c525 model. I raised the back slides to be longer, so it also reaches the cable of the c525 webcam. That makes it more stable. I…
I printed https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed which works great except it doesn't securely hold my webcam. I designed a compatible adapter by remixing the webcam holder with another C525-specific holder…
Tire and Rim to WPL Axis 1/16 scale Tire: 56mm RIM: 28 mm Category: R/C Vehicles
Bracket to mount an Logitech C525 webcam on the Ender 3. Used the open source drawings for the X-limit-switch bracket to design a new bracket. Topological optimization is used to generate the structure between the limit-switch bracket and…
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
I saw a bunch of mounts for a C270 type of camera for my Prusa i3 MK3S but I had bought a C525. I didn't realize it at the time but the C270 has a screw that allows you to remove the folding mount so you can use the hinge to mount it to…
Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…
mount for c525 Ender 3 Max neo No support
My wife's EPSON document camera has become broken under warranty. I needed some temporary replacement for her work while the EPSON is being repaired. So I've quickly, made a stand for Logitech C525 webcam to make it a makeshift Document…
I needed to hide POE injector. you can print it without supports, I just draw one in the middle of the of the bottom cover to have cleaner bridges. After print remove artificial blockings of the holes to pass through cables and screws…
Simple webcam mount for Logitech C525 webcam for the inside of lack table enclosure.
This is a mashup/remix of 2 models to create a more seamless adapter that can work with my older DC52 Dyson vacuum & newer V8+ Dyson accessories as well as Simpleway pet vacuum accessories. Printed with PLA+, .35mm layer height, 30%…
Logitech C525 Privacy Cover, with add-on 6mm x 2mm magnets to retain open closed positions.
Full height brackets for HP NC523SFP 10GbE nic recommend using a resin printer, but i have added a flat sided bracket if you want to print it sideways on a FDM Category: Computer
Printed in PETG on a Creality K1
All the credit goes to the original creators. StuTravers and Stewpercharged. StuTravers Logitech mount didn't fit my webcam, so I extended it a bit and added a hole for the USB cable which was hanging and moving my webcam all the time.…
Halterung für Logitech C 525
Ich habe mit die Tapo C52A mit Farbnachtsicht zur Überwachung meines Druckers zugelegt. Jedoch hat mit die Originale Halterung nicht gefallen, da diese zu viel Platz in Anspruch nimmt. Hier findet Ihr eine Halterung zur Überkopf Montage…
Way, way back in the year 2005, the Intel SC5295UP was sold as a rack-mountable workstation/server case. The OEM accessory for the hot swap conversion, APP3HSDBKIT, included an adapter with a fan for behind the drive bays. Obviously, this…
Cam Holder for Tronxy X5SA / Pro Do you like my work? then Support me https://www.paypal.me/joseprieto86/ This is a remix from https://www.thingiverse.com/thing:3384633 Print Settings Printer: Tronxy X5SA Pro Rafts: No Supports: No…
Remix for ESP8266 D1 mini and RC522 mini that I had laying around. You only need to change the bottom part. Print the others parts from the original project .
This mount holds a Logitech C525 webcam up on the "ceiling" of a IKEA LACK enclosure... or anything else you can get a few wood screws into. I wanted something to hold the camera for use with an OctoPi but still be able to easily and…
Got the idea from this and adjusted it to mount on my Hypercube Evolution printer. The frame mount fits an 3030 extrusion T-profile with 8mm gap. The parts are press-fit together and still allow a little rotation of the webcam. Print…
My wife's EPSON document camera has become broken under warranty. I needed some temporary replacement for her work while the EPSON is being repaired. So I've quickly, made a stand for Logitech C525 webcam to make it a makeshift Document…
Simple support for Logitech C565. Uses a carbon fiber tube (square, 6mm x 6mm, or round, 6mm diameter)
I've remixed the parent model to accept the guts of a C525 instead. You can use the screws that originally held the PCB. Use the outer body/second shell and the mounting brackets from the parent model by Itzo. Note that the PCB mounting…
This is a vented front panel cover for the Intel SC5295UP server/workstation case. There are a few versions: single 5.25" drive bay cover single floppy drive bay cover full cover (2 5.25" & floppy cover) Category: Computer
I created a supplementary mount for Tapo C520WS for hiding its cables away nicely for ceiling mounting. There is ample space to put all the white cable that comes out of the camera and an additional hole to let your ethernet/power cable…
i printed out this raspberry pi case here. https://www.printables.com/model/605060-raspberry-pi-5-case-wpower-button-v2 but with my initial raspberry pi project id like a screen and rfid reader. I found a case for the oled screen no…
I needed a way I could monitor prints from other rooms in the house and I had this old c525 laying around. This mounts to the z-axis motor mount by replacing the two screws with two m3 screws that are about 18mm long. Originally there was…
just use a 3mm screw
Simple roof for the Tapo camera, integrated cable holder. I didn't quite trust the tiny screws that came in the box. Print Settings Material: PETG Perimeters: 4 Texture: Fuzzy Skin (looks great and hides layer lines)
This holder is compatible with following models and Logitech WebCam C525:
This is designed to snuggly brace the reader for LEGO applications. The disk is a spacer to for soldered leads.
Extended the front-fit webcam mount to get a better angle for my C510, a narrow-angle webcam. The .3mf is pre-cut with rod connectors so it will print on a Prusa Mini+. Here is a quick sample timelapse with this webcam mount:
This remix adds a custom camera holder designed specifically for the Logitech C525 webcam. It mounts securely onto a standard tripod, making it perfect for streaming, video calls, or 3D print monitoring. The design includes a threaded…
Prints without supports.
Mount for ATAS FT4C52R spindle. 70% infill ABS https://www.makerfr.com/en/cnc/r-cnc/
This is a mount for a Logitech C525 webcam mounted on a IKEA Kallax cabinet. I keep my Ender 3 on an IKEA Kallax cabinet. Untill recently I was using an old tripod as a mount for my Logitech C525 webcam but I was getting tired of it being…
Camera mounting for the Logitech C525 (without the useless mouting equipment of the camera see https://craftunique.com/forums/view-thread/2375 ) I have printed it in the orientation in that it will be mounted (upside down what thingiverse…
Koncovka proudnice C52.
Adapter to use a 40mm OD Hoover attachment with an older Dyson (DC52 is what I have). You will need to add a single layer of electrical tape onto the male part of the Hoover attachment to get a solid attachment as otherwise you are just…
Kodak cherish C525 - camera holder - 45°
Das sind die Gehäuse Teile für einen Raspberry PI 4 und einer RFID-RC522 Platine , sowie einer Ablage für einen Barcode Scanner , dem PI Gehäuse und eines Ablage Fach . Das eigentlich Projekt ist ein Werkzeug Ausgabe-Rückgabe System , Das…
Bracket is compatible with the Promaster XC522 tripod when in a monopod configuration for getting a top-down adjustable webcam mount.
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
I needed a light for lighting my 3d prints. I modified Oleksii Zelivianskyi his model adding a mount for an LED light. The LED light itself is controlled through a Raspberry Pi running OctoPi with the OctoLight plugin (…
Das sind die Gehäuse Teile für einen Raspberry PI 4 und einer RFID-RC522 Platine , sowie einer Ablage für einen Barcode Scanner , dem PI Gehäuse und eines Ablage Fach . Das eigentlich Projekt ist ein Werkzeug Ausgabe-Rückgabe System , Das…
