Liczymy pasujące modele…
The MMC60 Switch is a cost-effective accessibility switch, an assistive device used by people with physical disabilities to control electronics (e.g. phones, computers, adapted toys, game controls, etc.). This switch is ideal for people…
The base piece slots in over the 12v charger, and the magsafe holder snaps into the large piece. The two pieces have been separated to make it easy to print. Only print in PETG or another temperature-resistent filament.
Print in PETG.
This Thing is a series of C60 buckyballs in several different versions: Balls - Just Balls B&S - Balls and Sticks Cage - Like a Cage CPK - Space Filling Model Licorice - Simply Jointed Sticks Bucky balls are actually called…
After having had several incidents where my aluminum can fell while braking, I decided to design an improved cup holder. It's made to accept standard aluminum cans as well as cardboard cups at least up to large (approximately 500 mL).…
This Volvo XC60 center console contains a slot for a handy retractable USB cable, two key ring hooks, and a slot for a few (tank) cards. To allow for the light coming in, I added an opening in the side. To be able to change the internal…
This is a lightweight filler funnel to assist with oil filling and topping up for a Volvo XC60 D4. It fits the oil filler opening nicely and incorporates air channels to allow air to escape as oil flows into the engine. This probably also…
Really liked the looks of capze 's design, but needed a way to securely and universally mount the camera to any current and future projects, and felt like it could be even thinner. The original STL was hard to make precise changes too, so…
Just a simple VOLVO keychain I made for my S60 keys. Its the exact length as the P3 key and takes vary little space and filament. Infill: 25% (I used Hexagon infill pattern with 3 walls) Material: ANY (I used SUNLU PLA Matte and it has…
Schlüsselanhänger in Form von Volvo XC60 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 10% - 100% Filament: any any Category: 2D Art
Some of the rubber holders have broken off in the cup holder of our XC60, which is a common problem. I made this insert to fit in the front cup holder so that a standard can or tall insulated bottle would stay supported and not tip over.…
This is specifically for the TOUGHBUILT C550, C600, C650, C700 sawhorses. Držiak pre stavebné kozy TOUGHBUILT C550, C600, C650, C700. TOUGHBUILT C550 TOUGHBUILT C600 TOUGHBUILT C650 TOUGHBUILT C700
Quick and dirty mount for the Tapo TC60 (Amazon version) or C100 camera, wanted to quickly mount it in the corner of our puppies crate. We use this to check on our puppy while he's in his crate as we cover it. It has been up for about 3…
The camera holder attached to the Centauri carbon glass door using the two screws on the top hinge. The housing is designed to reuse these screws so that no extra hardware is required. There are two versions of this model, a clean version…
Tapo camera mount. Mount as you need: double-sided adhesive tape, magnets, screws, cable ties, zip ties Magnets holes - 10 mm outer diameter, 5,2 mm deep
This is a 100 mm long rail model that can be easily scaled in 3 axes or just in the rail extension direction. Print without supports. Recommended fill - LIGHTNING.
SicherheitsRahmen für das Icom IC706mk2g Amateurfunkgerät. Um dieses beim Transport vor Schäden zu schützen. 2 Teile müssen gedruckt werden und man benötigt 4 Senkkopf Schrauben M5x12 um die Teile zum montieren.
Designed this phone holder for my Volvo XC60's cd slot, also has a remote holder for the garage gate. My phone (Huawei P20 Pro) has a cover and so the design includes the size for the cover as well. I have used PETG filament so that the…
Paper drinking straw C60 connector can be found here: https://www.printables.com/model/204151-paper-drinking-straw-dodecahedronc20truncated-icos @ jmckeand did provide many toothpick connectors here ……
I made this model for a samsung tablet (10") to fit in a Volvo XC60 car. Support needed. See my gcode for angles an support inspiration. It works ok without editing or damaging any panels in the car. Easy to put and remove.
Coin holder for 6 coins, fits the otherwise pretty useless small compartment in front of the shift lever. Please note this only fits earlier model years without integrated wireless charger. May also fit other models, i.e. V60/S60 and…
This is a mount for the Tripp Lite BC600R UPS so that it can be mounted in the bottom of the DeskPi RackMate T0 or T1 server rack. This UPS is the perfect size for the RackMate T0/1 and provides up to 300W of power for small form factor…
Die Auffangschale nutze ich, zum Reinigen und/oder Entkalken, meiner Jura Impressa C60 Kaffee Maschine. Dies ist mein erster Entwurf, in Freecad. Die Datei stelle ich zur Verfügen, falls jemand noch Anpassungen, für seine Maschine, machen…
Estes Rocket STM-012 Kit 7221 Fin and Nose Cone PNC60RL Templates JPG and SVG Clean drawings of the fins and Nose cone 3D models of the fins and Nose cone to the original correct scale Half Drawing of the nose cone (I used to create and…
Print with Petg for added thermal resistance I have found that printing at 0.3mm layer height is optimal
A basic model that fits snugly into the cavity right before the cupholder. The height allows the model to lock itself under the lip of the cavity and not wobble. The model has 3 pockets, one of which holds the key fob, the middle one…
This is followup on creating regular dodecahedron with 12 regular pentagon faces, with edges of toothpicks: https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/toothpick-polyhedra-fullerenes/#post-606910 Dodecahedron…
Volvo XC60 Console Organizer w/ coin holder added to front and hooks slightly redesigned to avoid needing supports.
Simple organizer to fit inside the 2015 Volvo XC60 armrest storage compartment. Without this everything I needed to access quickly was piled on top of each other. Now I keep the following items in this compartment: Notepad, pen (clipped…
Modified the original designed for the XC90, and made it fit the XC60.
Bracket/holder compatible with TP_Link C100, C110, TC60 cameras and all those with the same mounting method (with 13.2 mm ball at the base). It can be installed with the original screws. ATTENTION!! Check that the ball at the base has a…
I was looking for a center console tray for my new Volvo, and found what I liked from two different version already created by others on Thingiverse, so I merged the two into one that I liked. I've posted that result here. There are to…
3 models for display C600 protective to protect display in case of shocks, protects part of the front screen as well. full protective to protect also the center of the screen by means of a form that passes through areas without…
Bit organizer for DeWalt DWC600 DCW604 in DeWalt carrying case. Organizer must be glued with double-sided foam tape.
If you have this headphone and the part that holds the speaker on broke, then you want this.
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
This is a remix of Ender 3 Webcam mount for Logitech C300/C500/C600 or other similar. I use C500. I made the height lower to be at about the height of the bed and a bit longer. Also as a joint I use only M5 screw, seems enough. The camera…
Controlling dust in a woodshop is always an issue. The bag collector included with the Porter-Cable PC60THP planer does only a moderate job of collecting the sawdust and chips produced by the planer. Replacing the dust bag with this…
This is a camera mount for Tapo TC60 model. It fits perfectly directly onto the top bar of the Bambu Lab P1P printer. It allows you to slide the TP6c Tapo camera into the slot perfectly. When designed, i made sure that the head of the…
Mod Single Doseless HC600 Heycafe - convert Mazzer
Estes Bertha Loc4 PNC60ms-4 Loose version is same with 0.2mm smaller diameter shoulder of the other one is too tight.
DESIGN INTENTS Replacing missing charging cover on the battery. Existing one can easily be lost Need to fit snug enough to not fall off Designed and sized to be printed in flex material PRINTING PARTS Orientation : STL is already oriented…
Designed for easier handling when opening the glass box above the front doors. The geometry reflects the shape of the original finger recess for an improved grip. Printed with elastic TPU, 15% infill. The optimal printing orientation is…
Cheap vat clamps on Kelant C60 Mono 2K broke after a couple weeks so I model a new set with curved interior edge that should be stronger than the original. I took the knurled threaded insert out of the old clamp and set it in the new…
Extend your device life time by protecting it. Print with transparent filament and use it as a diffuser.
Mod Kit Doserless HC600 HeyCafe
Panasonic CW-C60YU or CW-80YU Air Conditioner grille slat. May fit similar models. Without protrusions, the slat is 106 mm by 17 mm. Protrusions are delicate, print carefully. How I printed: Process: FDM. Material: PETG. Color: White.…
Don't want to drill holes in your wall to mount your Tapo camera? Want to move your camera to a new location when going on holiday? This mount is perfect for use with command strips, pvc tape or magnets. With a thick base it fits snug…
Cover for the Jura Water Tank swimmer cover. As I know it is not available anymore :-( Should fit water tanks for these models: Jura C5-C9-C60-E8-E9-F7-F8-F9. I tried it with two different tanks, one fits very good, the other maybe need…
This is a rotating camera mount for Tapo TC60 camera, which can be mounted on the pegboard modplate for Bambu P1P.
This is the experimental determined iso electron-density surface at 0.1 and 0.5 electrons per cubic Angstroms of a fluorinated Fullerene C60F18 see: "Bond Orders and Atomic Properties of the Highly Deformed Halogenated Fullerenes C60F18…
This is a 0.8 MOD gear 65T for Pentax SMC600 F4, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or ZWO EAF stepper motor with 54T gear…
Description: This is a custom-designed 3D printable light shade adapter for the Mamen SL-C60R RGB COB Video Studio Light (also compatible with similar models like the MIAOTU G100). Key Features: - Enlarged shade diameter for improved…
The Psion MC series has two expansion slots at the back, mine came with two expansion ports, other owners have no expansion ports or covers. This design contains a “Full Expansion” model which fills the entire slot, and an “Empty…
Mount for my Tapo TC60 cam to mount it in a grow tent with 16mm poles
Multiboard mount for the Tapo TC60 camera
Als het schuifje van het ventilatierooster in het dashboard er uit springt, valt het in het ventilatiekanaal. Met deze print maak je snel een nieuwe.
OPNsense at this point in time does not sell a wall mount for the DEC600 series, only for the DEC700 series, which is not compatible with the DEC600 series. So I created these feet to serve as wallmount. You print two pair of them, one…
Zebralight SC600 flat mount. Use double sided tape to adhere. IPA all surfaces and allow to flash dry before mounting.
C60 is the buckyball: 60 carbons arranged as a truncated icosahedron with 12 pentagons and 20 hexagons. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its…
I like to use my Zebralight SC60 as bicycle-light, using a standard handle-bar to light clip. This way, I always have a good torch with me, when I get off the bike. But a normal flashlight, will blind oncoming traffic. This clip solves…
Made this because i needed one for myself and decided to post it.
5 labeled models of carbon's famous allotropes - from the diamond unit cell to a full C60 buckminsterfullerene and a carbon nanotube segment. Every atom is a sphere in standard CPK colors with its element symbol plus proton and neutron…
Wanted a way to hang my Nitecore headlamp on my SKÅDIS charging station, so I added a couple of pegs to crisb's protection cover. Nothing else is touched. Same clamp, same fit, all credit to the original.
Zebralight SC600 flat mount. Use double sided tape to adhere. IPA all surfaces and allow to flash dry before mounting.
A basic model that fits snugly into the cavity right before the cupholder. The height allows the model to lock itself under the lip of the cavity and not wobble. The model has 3 pockets, one of which holds the key fob, the middle one…
I have created a zero clearance insert for the Festool KSC60 sliding compound miter saw. I have added the .stl file as well as some print files for the Prusa mini. which you can just glue the pieces together. The print files are 100% fill…
Used to plug the “Option” syrup line for a Taylor C606 (McDonald's) Milkshake / Sundae machine; requires an O-ring for the very top channel.
Abdeckung kompatibel mit der Hinterradachse an einer Honda - CB1000R SC60 (2010) Schlüsselweite innen: 26,5mm Höhe Schlüsselweite innen 13,00mm Gedruckt mit: ESun - PETG Basic Black Schichthöhe: 0.16 Wandlinien: 4 Fülldichte: 15%…
Friend of mine fuel line clip broke in his Volvo XC60. So i designed a replacement PETG, 50% infill, support
This is my remix of JackHydrazine's PNC-60MS nose cone. Unlike his, mine is "solid" (i.e. infilled). Because it can be printed without infill (as Jack's original is), you can tinker the amount of infill as much as you like. I did it this…
Single piece mount for the Kasa EC60 Wifi Camera. No supports needed. Use two mounting screws included with the camera to secure the camera. Slide onto any 2020 extrusion to orient camera as desired.
Lateral clamping display C600 Megamo, orange or black color, also 2 specific pads in tpu to avoid slipping, Attention the support must be introduced by the narrowest side of the handlebar to the side of the fist, to avoid forcing the…
The Tapo TC60 camera mount that has a rotating head, fits perfectly onto the body of the Bambu P1P. Printed in PLA+, i have printed the 2 parts separately, came out with a perfect fit. The mount is easily removable and slides with ease on…
Holder for a Beckhoff USB license key C9900-L100 for a Beckhoff C6017. Idea is to prevent easy removal during operation. It should also make it more robust against vibrations. Could also fit the smaller model C6015.
It's a simple keychain saying Volvo XC60. Note scale the model to 150% for better results with the text.
I am using a TP Link (Tapo) TC60 to monitor my prints, and this mounts perfectly to my Anycubic Kobra 2 Pro . It may also work with other printers since it mounts to the standard aluminum profile, where the normal spool holder usually…
Simple mount plate for an AuxBeam 6 panel, BC60, that goes to the left of the radio area in a Polaris General.
