P
PrintablesChen Hsin Yu
delonghi EC885 scale tray
It fits perfectly, so ensure the tray is aligned and push it down vertically.
- Pobrania
- 90
- Polubienia
- 10
- Ocena
- 5
Wyniki wyszukiwania: c8
Liczymy pasujące modele…
P
PrintablesJeff Chen
I/O Shield for Asus P4C800-E Deluxe
Very specific. This is an I/O Shield for the Asus P4C800-E Deluxe motherboard. Print right side up with support. It's supposed to be a bit loose. Don't worry. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEtz
Mount V2 for Carkool Portable CarPlay/AndroidAuto Display 10.26 inch (Remix for LC80)
Please read full description from original.
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
Printables3DP Solutions
Edifier Remote - RC17A/RC80B
Replacement housing for the internals of the Edifier RC17A/RC80B remote. Uses original PCB, button membrane, battery tray, and IR cover. Snap fit, print without supports. 0.2mm layers with 3 perimeters and 100% infill. Decided to throw…
- Pobrania
- 34
- Polubienia
- 10
- Ocena
- 0
P
Printablescyperous
C8 Nano Electric Scissors Case
https://www.amazon.com/Fanttik-C8-Nano-Rechargeable-Cardboard I printed it on my Qidi Plus 4 (0.4mm) No supports There are two sections on the lid and body where magnets can be inserted during the print. The magnets used are 3mm thick x…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
PrintablesIngFraBek
Siemens LC86KA670/01 range hood
I replaced the halogen lamps with LED lamps. Since the LEDs require more space than the halogen lamps, and the original cover glass no longer fit (and was also broken), I designed an alternative cover. Note: Due to their low power…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printables
Hubitat Elevation C8 Pro Hub Wall Mount
Hubitat Elevation home automation C8 Pro hub wall mount, files include five mounting options. Blank: flat on back. CS: for small poster Command Strips. Keyhole: with a keyhole slot. 20mmoc: with four holes in a 20mm grid. Skadis 40mm:…
P
Printables
Asus AC86U 60mm server fan mount
The fans work well with 5v usb ports and reduce CPU temperature from 98c to 60c but quite noisy. I print this with PETG and the 2 holes on the top turned out not good (without support). If you want to print without support, rotate 90…
P
Printables
KTM 950/990 inner clutch hub holder LC8 - 60029003000
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
P
Printables
C8 Flashlight XT30 mod for remote switch
This is a mod to attach a DIY detachable remote pressure switch to the C8 flashlight. The printed parts replace part of the stock rear switch assembly. You are also going to need XT30 connectors, and some metal strips (like those they use…
P
Printables
Hubitat Elevation Hub 3C Wall Mount for C5 C7 C8 C8Pro
3C Wall Mount Hubitat Elevation home automation hub wall mount, works on C5, C7 and C8 generations of hubs. C-5 and C-7 as well as both versions of C-8, Pro and regular. Shown with some Green Neon Acrylic paint. Holder keeps hub slightly…
P
Printables
Chevrolet Corvette C8 Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
P
Printables
Guition 10.1" ESP32P4 / JC8012P4A1C wall mount
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
P
Printables
Celestron C8 (Orange Pebble Tube) EAF Bracket REVISED 8-April-2026
EAF Bracket, Bearing Retainer/Spacer and Collar for the older Celestron C8 with Orange Pebble tube. I bought a similar design 5 years ago but, it never worked properly. I made some major changes in rigidity, functionality as well as this…
P
Printables
Window holder for MC801A box parametric
This is a holder for the MC801A box for hanging on the upper edge of the window, for better reception of the Wifi signal. After printing, I screwed two copper hooks to the upper part, which I made from copper tape. Then I hung the holder…
P
Printables
Siemens LC86KA670/01 range hood
I replaced the halogen lamps with LED lamps. Since the LEDs require more space than the halogen lamps, and the original cover glass no longer fit (and was also broken), I designed an alternative cover. Note: Due to their low power…
P
Printables
FMS FCX18 LC80 inner fenders
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
P
Printables
Celestron C8 Bahtinov Mask
This mask is designed to easy fit the standard C8 sct. the central diameter is 72 mm and gives some slack for easy fit and removal during cold nights. The other masks Ive found has an outer diameter the same as the aperature. This means…
P
Printables
DeLonghi EC890 Cup rising platform
Platform for the Delonghi Dedica EC890 to position small cups closer to the portafilter. Reduces splashing to almost zero. There is a clearance of approx. 7 cm between the platform and the portafilter for the cups. Four magnets with a…
P
Printables
Polk Audio Wall insert for RC85i
I needed an insert for sheetrock for my polk speaker. AI came up with an OpenSCAD file: // ===== SETTINGS ===== $fn = 64; IN_TO_MM = 25.4; // 1 = Left Half (Pins) // 2 = Right Half (Holes) // 3 = Both (Viewing only) PART = 1; // ---…
P
Printables
SC846 Dual U.2 NVMe Caddy — Two-Piece Skeletal Design
Two-piece parametric OpenSCAD caddy holding two Samsung PM1733 (or any 15mm U.2 2.5") NVMe SSDs in a Supermicro SC846 chassis, using twang's HDD base mount rail system. Boolean-split at the drive boundary so each half prints flat without…
P
Printables
Antec c8 PC case clip
Hand messured and drawn from my last spare clip for Antec C8 non curved version (idk if clips are diffrent). Took me few tries to get to eyeball "close enough" after printing. I'm new to this so there is definitely some improvment space.…
P
Printables
Duncan mask - old C8 collimation aid
This is a simple mask for SCT collimation. It can be printed in different materials of your liking (gluestic recommanded for PLA). Pictured is PETG leftover filaments used but I suggest you print it black of use anti-relfection material…
P
Printables
Case Fox PAD- guition jc8048w550 capacitive touch
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
P
Printables
OMRON Nebulizer Bracket NE-C801
For some reason, MFG of this Omron Air Compressor Model NE-C801 made a mount for the inlet cup that doesnt actually work! So I used this existing mount edge to make my own mount! And added a little tube holder since I dont want my…
P
Printables
Guition 10.1" ESP32P4 / JC8012P4A1C Picture Frame (with Optional Wood Grain)
This remix wraps the Guition 10.1" / JC8012P4A1C display in a clean, frame-style housing suitable for wall mounting or desktop use. What's in the download: Source: STEP files are provided so you can adjust the dimensions or mounting…
P
Printables
Accessory Mount For Celestron C8
This is an accessory mount for a Celestron C8 telescope that provides a standard 1/4 20 screw to attach a spotting scope. I designed it to mount my 3D printed 80mm f/4 refractor to my C8 telescope. It requires: one tripod screw - to…
P
Printables
HEPA Filter H12/H13 (FC8038/01, 150x120x25mm) + Activated Carbon Filter Housing for 120mm Fan
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
P
Printables
FMS FCX18 LC80 inner fenders
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
P
Printables
C8 Corvette Lightbox (Members Tier)
This is my Corvette C8 Lightbox with stand and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White Elegoo PLA - Black Elegoo PLA - Yellow Overture PLA - Fresh Red…
P
Printables
Halterung zu Fernbedienung HOMEMATIC CCU IP HM-RC-8 / HmIP-RC8
Das sind STL Dateien zur Fernbedienung aus dem Homematic Programm. Beide Varianten, teilweise mit Text... Muss man sehen was für einen passt.. ❤Lasst gerne ein Like da ! Da freut sich der Bastler!✌😉 Jeweils mit 2 Befestigungslöcher 4mm an…
P
Printables
Tri-Bahtinov Mask for C8 and Edge HD 8 Hyperstar with cooled ZWO/OGMA/Touptek 80mm diameter camera
Tri-Bahtinov Mask for C8 and Edge HD 8 Hyperstar with cooled ZWO/OGMA/Touptek 80mm diameter camera This Tri-bahtinov mask will fit C8 or Edge HD8 in the Hyperstar configuration with out having to remove the camera. outer diameter is 203mm…
P
Printables
FRC8339 - 22t Gear
1/2in Hex Bore 10mm Major Thickness 15mm Center Thickness 121mm Diameter
P
Printables
TP-Link Archer C50 C80 magnetic/screw mount
how to print Print on the supplied orientation. Enable normal snug supports (do not enable "supports on build plate only"). Remove the tiny supports with pliers. how to use magnetic version Do not use for overhead mounting. Use M3 4mm…
P
Printables
Citroen C8 Sun Screen Clip
A small clip to replace the broken original one that holds the sun screen up for a passenger window. Easy model, easy print, easy fix. I printed it with PETG and it has proven itself in mid-european summer. If your place / car tends to…
P
Printables
Corvette c8
This Corvette c8 Silhouette wall art will give your office, room or garage a unique look that will catch attention to any racing, car enthusiast and will add a subtile touch to your home design. This could be a unique gift to every…
P
Printables
Explore Scientific / Bresser finderscope to GSO 8" RC (RC8)
This simple plate allows you to attach that weird mounting foot of ES 10x60 to existing M4 holes on your GSO RC8. Insert four M4 nuts into the base Chose four M4 screws for them that won't go too far in and damage your scope body. At…
P
Printables
Celestron SP-C8 SCT Fine Focus Wheel for Metal Focus Knobs
If you find my designs useful, please consider sending a tip Remix of jggall01 's Fine Focus Knob to fit the older Black Celestron SP-C8 tubes with the metal focus knobs and to give it that honeycomb effect everyone seems to be doing for…
P
Printables
Supermicro SC847 second fan wall
After replacing both original fan walls with 3x 140mm fans I discovered that 12 rear HDD's slots overheats. This second wall will fit 3x 80mm fans and will push air to the lower part of the chasse.
P
Printables
Car model Chevrolet Corvete C8
It's a 2020 Chevrolet Corvette. You can drive it and it has lego duplo clips on the seats.
P
Printables
SC8UU replacement for IGUS Drylin RJ4JP-01-08 (LM8UU)
I wanted to upgrade my LM8UU to IGUS Drylin. First attempt was to just swap LM8UU in the existing aluminium SC8UU by IGUS Drylin RJ4JP-01-08. Result was a lot of bearing clearance. According to datasheet, the IGUS drylin bearings need to…
P
Printables
DC step up converter qs-1224cc80 rugged case
Case for qs-1224cc80 dc step up converter module and other similar models. Pretty tough, not waterproof, though. Used as 12V car laptop charger. Features open radiator design, see-through hole for status LED and vents for internal…
P
Printables
Celestron C8 (1992) Stick-Focuser - Version 2
Das ist die NEUE Version des C8 Stick-Focuser! Alte Version: https://www.printables.com/model/971030-celestron-c8-1992-stick-focuser Vorab: Das ist kein Projekt für Anfängerinnen und Anfänger. Hinreichende Kenntnisse im Löten und…
P
Printables
Hubitat Elevation C8 Pro Hub Wall Mount
Hubitat Elevation home automation C8 Pro hub wall mount, files include five mounting options. Blank: flat on back. CS: for small poster Command Strips. Keyhole: with a keyhole slot. 20mmoc: with four holes in a 20mm grid. Skadis 40mm:…
P
Printables
Wall hanger for VERILUX Happy light Mod# VT43C83
I did not like the light on the stand, it felt like if it was just shooting light in an unnatural way into my eyes. The happy light is designed to simulate daylight and give you energy, and you do need it to hit you on the eyes, however,…
P
Printables
Supermicro SC846 AIO 360 Mount
A bracket for mounting a 360 AIO into a 24-disk bay Supermicro 846 case. Requires several other models to work. This model will not fit with the stock hot-swap power supply setup. Requires ATX Power Supply Mount –…
P
Printables
HPI Venture 1:10 - Chassis Parts / Electronic Plate / RCRUN LC80 Body Mount / Etc
General Description: L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer. Unfortunately, I sold the Venture, so there won't be any more parts. Maybe the ones here can help…
P
Printables
RCRUN Toyota LC80 - Body Parts
General Description: This body is a gigantic pile of smooth plastic. It needs some refinement. To mount the body on an HPI Venture there are also body mounts available here on my Printables Site. L and R mean left and right. Most parts…
P
Printables
ZTE MC801A Tower
The only place in my apartment in which this 5G modem can have optimal reception (line of sight to the cell tower) is in a window on top of an unused radiator. Due to the structure of the wall below the window, wall mounting was not…
P
Printables
PC817 Optocoupler Optoisolator Enclosure
It is an enclosure meant to protect the board from unexpected shorts and make it easier to work with. It is designed to allow access from the top so that the screw terminals can be tightened. You can check out the completed assembly below.
P
Printables
DIN rail mount for PC817 2 channel optocoupler module
DIN rail mount for chinese dual PC817 optocoupler board (17mm / 1 part unit width) PCB has common ground on inputs, outputs may be grounded via jumpers. If you are looking for a board without any connections between both optocouplers,…
P
Printables
SC8UU mounting pad/plate 4mm
Mounting pad/plate for linear bearing SC8UU wich i needed for more elevation of Y carraige. Last layer is only 0,15mm so you need to print it with layer high not more than that.
P
Printables
Hood Vent Ducts - Subaru GC8/GF8 2.5RS Impreza Outback Forester STI
Enhance your Subaru's performance and style with this pair of hood vent ducts, specifically designed for GC8/GF8 2.5RS, Outback, and Forester models with vented hoods. These ducts effectively channel water away from critical components…
P
Printables
XSTAR VC8S Charger Wall Mount
It's a wall mount for a XSTAR VC8S Charger. Attaches with 4 screws; on the sides. This takes more space but ensures that it's impossible to accidentally pull it out. There are some 15 degree slopes, so make sure to print it with its…
P
Printables
FMS FCX10 LC80 exhaust
Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.
P
Printables
SC8UU replacement bronce bushing 8-12-12 /
Replacement für a SC8UU bearing block based on ideas from toolson - http://scheuten.me . The Mounting Holes differ from the SC8UU, the width is the same but i uses only 2 mounting hole on request i could also do a version that matches the…
P
Printables
Asus RT-AC88U Wall Mount
3 part wall mount for the Asus RT-AC88U router. Flat to the wall. design, not table top style. Fusion files and print files in the download section.
P
Printables
LM8LUU holder with SC8UU holes
Oops! I accidentally ordered LM8LUU bearings instead of LM8UU for my Anet A8 bed. Rather than going through the hassle of reordering the correct bearings, I took matters into my own hands and designed a custom bearing holder. The mounting…
P
Printables
Asus AC86U 60mm server fan mount
The fans work well with 5v usb ports and reduce CPU temperature from 98c to 60c but quite noisy. I print this with PETG and the 2 holes on the top turned out not good (without support). If you want to print without support, rotate 90…
P
Printables
FMS FCX18 LC80 Shock keys
The stepfile is only the left side. Just mirror the side for the other. printed without support.
P
Printables
TCL RC833 remote battery cover replacement
As requested and test printed by u/weeb-splat .
P
Printables
iOptron RC8 (GSO) Secondary Mirror Collimation Mask
This is a simple secondary mirror mask I made to ease collimating the focuser with a laser. If you have trouble with it like I do this makes it quick and easy. This is sized for the RC8 secondary baffle tube. I have supplied the FreeCAD…
P
Printables
Kincony KC868-A6 Case
A simple case for the Kincon KC868-A6, Includes Case Base Case Top Display Spacer Requires M3x5x4.5 inserts
P
Printables
Kincony KC868-A6 case with device model
Wall-mountable enclosure for the ESP32 six-relay module Kincony K868-A6. A model is included to facilitate further modification. No printing supports needed. Some walls are thinned - they are translucent. Alternatively, they can be easily…
P
Printables
Edifier RC80B Remote Holder
A cradle for the Edifier RC80B Remote Contol. Designed to be mounted on the side of a desktop with 2 wood screws.
P
Printables
DeLonghi Dedica EC885 EC685 modification - Display
GitHub - CaiJonas/DeLonghi-Dedica-EC885-EC685-modification Case for my first arduino project.
P
Printables
Mammoth BC8 dor
I lost one of the doors from the crossrc Mammoth BC8 model and I drew it so I could finish building the kit.
P
Printables
Suspension Bushings Pill-box ASSO RC8B4
As this was requested more then once, I made a new version of a previous model (intended for the Team Xray XB8-buggy) for the Team associated buggy. The RC8B4….-buggy uses two different sizes of "pills. Both can be stored in this box. :D…
P
Printables
KTM 950/990 inner clutch hub holder LC8 - 60029003000
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
P
Printables
Best telescope mirror alignment tool. Telescope Collimation. Celestron C8-N
When using newtonian telescope we very need make collimation. It is very difficult if you don't use any tool. That tool is good way to alignment 90 degree of secondary mirror. After that that tool is good way to alignment main mirror. The…
P
Printables
XTAR VC8 Plus Charger Wall Mount
After printing @rdeknijf_2254512's excellent charger wall mount I realized that it was not the exact same model as mine (VC8S vs. my VC8 Plus), and thus was a little larger than what I needed. To keep it snuggled tight on my wall I made…
P
Printables
Cloud C8 Phone case
For all you free government phone people who cant get cases for these off brand phones
P
Printables
Holder for Labeling Capto C8 Tools
How It Works: The holder has a "C" shaped opening that snaps onto the Capto C8 tool shank, holding it securely. The flat part at the bottom is for writing or sticking a label with the tool’s details. You can use a marker or attach a…
P
Printables
Annke - C800 - I91DM Base
This is a base for the New Annke c800 camera I91DM, you can tell if you have new version by the fact it has twist lock base and new style logo. I have created it to be deep so it can partially see my widows and also so the waterproof…
P
Printables
C8 Flashlight XT30 mod for remote switch
This is a mod to attach a DIY detachable remote pressure switch to the C8 flashlight. The printed parts replace part of the stock rear switch assembly. You are also going to need XT30 connectors, and some metal strips (like those they use…
P
Printables
Corvette C8 Keychain
Corvette C8 Keychain This keychain is modeled after the bold and futuristic Chevrolet Corvette C8 , the first mid-engine Corvette ever made. Print with a 0.2 mm nozzle for finer detail. Perfect for Corvette fans , C8 owners , and American…
P
Printables
Fatbike C80 Mini !
🔋 Battery Cover for C80 Mini Fatbike (EN) Also check out my YouTube channel and support me by subscribing and possibly watching! 👉 youtube.com/@ElektroTechNL?sub_confirmation=1 For the C80 Mini Fatbike, I have designed a simple yet…
P
Printables
Celestron C8 Fork Spacer (OTA)
These are to allow you to reinsert the fork mounting bolts back into the OTA, after you defork a C8. This way the holes are blocked, preventing insects/dust into the OTA. Also, if you screw in the original bolts back in all the way, it…
P
Printables
Celestron C8 EAF Adapter (Late 90's Celestar)
Celestron C8 EAF Adapter for a Celestron C8 Celestar Deluxe from the late 90's OTA. I tried a few different adapters and none worked, so your mileage may vary. This scope is Fastar/HyperStar compatible and is black w/ the twist lock dust…
P
Printables
Kincony KC868-A6 case extended
Thank you to the original designed for including the STEP files. It made it a lot easier to remix the models. On the left and right are mounting holes for the Cable clamps to secure electrical wiring to the base. The Cable clamps come in…
P
Printables
Gridfinity HSC8 6-6A Crimping Tool Holder – With and Without Eject Hole
This is a Gridfinity-compatible holder specifically designed for the HSC8 6-6A crimping tool. The download includes two versions: One with an ejection hole at the bottom for easier tool removal. One without the ejection hole , for a…
P
Printables
PC817 Optocoupler DIN Mount
I Installed a CPAP blower for my 3d printer. I went the optocoupler route for the meantime (as I am using a thinclient as my klipper host, and working on building the CPAP flap mod). I didn't see too many mounts that I liked so I decided…
P
Printables
Hubitat Elevation Hub 3C Wall Mount for C5 C7 C8 C8Pro
3C Wall Mount Hubitat Elevation home automation hub wall mount, works on C5, C7 and C8 generations of hubs. C-5 and C-7 as well as both versions of C-8, Pro and regular. Shown with some Green Neon Acrylic paint. Holder keeps hub slightly…
P
Printables
Cover for ZTE MC889 Outdoor Router to insert own cable
Hi all, having the problem, that the 10m cable coming with the ZTE889 is not long enough and cannot be replaced, I created my own cover to add a my own cable. This needs to be used together with a cable gland, so you can seal any round…
P
Printables
ProSteel HSC8E Safe Organizer
An organizer for the ProSteel HSC8E safe sold at Costco. I designed it for my specific use case but someone out there probably can use it too. Thus, I included the STEP model, so edit to your hearts content. Designed to hold 2 bottles of…
P
Printables
Halterung für SIGMA WC8 Tacho
Eine Lenkerhalterung für meinen SIGMA WC8 Tacho um den Tacho Lenkermittig anbringen zu können. Ich habe PETG genommen und 4 x M4 Gewindeschmelz Einsätze sowoie 4xM4x20 Schrauben. Kabelklemmen sind auch dabei um das Kabel festklipsen zu…
P
Printables
CNC85X115 case and clamping
Case and Mount Assembly for CNC85x115 PV Panel (STAR SOLAR) This case and mounting system is designed to securely house the STAR SOLAR CNC85x115 PV panel and integrate it with a camera-mount-compatible bracket. The assembly is optimized…
P
Printables
Philips FC8471 hose fastening
Vacuum cleaner pipe spare part, developed by myself, positive testing, PETG spare part
P
Printables
PC817 Optocoupler DIN Mount with Clip
This is a remix of a PC817 optocoupler mount designed to be used in control boxes or 3D printer electronics enclosures. The original model required a separate DIN rail clip. This remix integrates the DIN rail mount directly into the part,…
P
Printables
ASUS RT-AC86U Router Wall Bracket
Project from https://www.thingiverse.com/thing:3121121 I was thrilled to find that someone had already made a wall mounting bracket for the ASUS RT-AC68U, as I thought this would fit my new ASUS RT-AC86U router! It turns it the two…