147 modeli
I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 This is my version of the Ocarina of Time in Alto C . If you like it, leave a like, if you really like it and you want to support me, donations are welcome…
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
12/6 - Check out my latest contest entries and give me a vote!!: https://www.printables.com/model/671865-easy-print-6-hole-pendant-ocarina This beautiful item took a lot of experimentation (and a ton of ABS) to get right... but the final…
Wydruk około 3,59 €–4,39 € nettoWstępna wycena jednego wariantu
Original model can be found here: https://www.thingiverse.com/thing:2846575
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
A double chamber ocarina based on this model file. The only change is that I added in the second thumb hole for the right thumb on the larger of the two chambers. I printed with 100% infill and supports.
Wydruk około 14,21 €–17,37 € nettoWstępna wycena jednego wariantu
A Lithophane in the size of 110 x 110 mm depicting the Carina Nebula that was captured with the James Webb Telescope . The Image of the Carina Nebula is framed in a hexagon grid resembling the James Webb Telescope. It consists of two…
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
I've created a handful of breakable pot designs: Two (simple and patterned) versions inspired by pot designs in The Legend of Zelda: Ocarina of Time for Nintendo Switch 2 One (retro) version inspired by the pot design in The Legend of…
Wydruk około 2,71 €–3,32 € nettoWstępna wycena jednego wariantu
This is a remix of @Bubbleology's amazing JWST Carina Nebula lithophane, modified to print flat and in multiple colors for printers with Bambu Labs AMS or the MMU Printed at 100% infill, layer height of 0.12, and at standard speed on my…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
Rejoins nous : https://www.facebook.com/groups/492474174608397/ Category: Other
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
I noticed some issues with the model when getting ready to print it. I could not find any other models that addressed theses issues or even any comments that reference these weird issues. I used MeshLab to select the vertices of these…
I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 This ocarina is designed to be easy printed and to be small enough to fit on my VORON0. It is supposed to be printed at the mouthpiece without the need of…
I added tree supports to the original ocarina. It printed really well.
I Remixed The Hookshot from https://www.myminifactory.com/object/3d-print-ocarina-of-time-hookshot-11032 and the Chain from https://www.thingiverse.com/thing:965905 to look more Accurate. Based on the Render from OoT 3DS and the Colors…
This is a 5-hole ocarina that ranges relatively well from C5 to D6. Refer to the chart to see how far it deviates from the ideal frequency at each note compared to other 3D printed ocarinas. Its small size is suitable for tiny hands…
I've gone through quite a few iterations of test ocarina's to arrive at this tone-accurate musical instrument that prints without support and without assembly in your resin printer. …and it looks like a butterfly cocoon as it hangs down…
A pendant remixed from the small 6 holes ocarina, plays well
A stand to hold the ocarina from The Legend of Zelda: Ocarina of Time.
🗡 🛡 The Legend of Zelda's 37th birthday This model was made by Dany Sánchez . Celebrate 37 years of Link's adventures with us! Back in 2014 this was the first model based on a Zelda location that we ever made. Now in 2023, we updated it…
This is a 4-hole ocarina that you can print and play right off the build plate! No supports or raft necessary. It goes through one full scale and sounds essentially like a store-bought one: and here's another print by CircuitsAndStrings:…
Couldn't find a OoT small key model with the old-school polygonal look (nor a rip of the original model), so I made my own.
I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 If you like it, leave a like, if you really like it and you want to support me, donations are welcome ;) PayPal This ocarina has a completely redesigned…
🌋 🔥 Death Mountain This model was made by Dany Sánchez . Death Mountain is a location in many games of The Legend of Zelda, typically an active volcano and home of the Gorons , a rock-eating, mountain-dwelling race of peaceful people.…
Highly printable 5-hole ocarina, based on the model from @ Julius3E8 . But when printing that model, I noticed some less than perfect overhangs on the sides near the bottom, where the overhang was the steepest. Therefore I recreated and…
Wasnt able to find the fairy ocarina online so remixed and made one, enjoy!
Please give a like a follow me! I make a lot of Zelda models. If you make it, please post your make! And if you have any issues, just let me know.
This is a middle C 4-hole ocarina that you can print and play right off the build plate! No supports or raft necessary. It goes through one full scale and sounds essentially like a store-bought one: and here's another print by…
I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I…
I've made many-an-Ocarina in my time and this is the first model you can wrap around your neck and carry with you to on a hike or join the marching band for a toot-along (I'm sure they'd appreciate it). It also makes a good Xmas ornament.…
Print and sing.
This a 50% scaled down version of the regular 6 Hole Ocarina for a pendant-sized good time. This one stands at about 4.7mm in height. Here's a link to the normal-sized one: https://www.thingiverse.com/thing:1012353 If you found this…
This ocarina is a quick and easy print with no supports needed. It is designed to print on it's side as oriented in the STL. I've printed it with a 0.4 nozzle and a 0.6 nozzle and it sounded the same on each. I printed it at .2 layer…
🐔 Kakariko Village 🏡 Inspired by The Legend of Zelda: Ocarina of Time , MiniWorld 3D celebrated the 20th Anniversary of The Legend of Zelda: Ocarina of Time with this multicolor model of Kakariko Village, featuring a rotating windmill and…
I love The Legend of Zelda: Ocarina of Time , and so I created these detailed push blocks that are often found in puzzles inside dungeons in the game. The various versions of the patterns are as follows: Crescent & star , from the N64…
The Boomerang inspired from Ocarina of time, part of the october free zelda commission requests, you all asked for it so here it is! Please make sure to add a make of you download this, thank you!
You want this 3D Model ? Contact Me :) My Youtube Channel : https://www.youtube.com/c/BODY3D My Facebook : https://www.facebook.com/Body.3D.Youtube TEAM BODY3D : https://www.facebook.com/groups/492474174608397/ My Designs :…
I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 This is a funny little toy. So… this ocarina is not in a specific tune. It is loud and annoying. It is fun to play. How to use it: Close the slot with a…
Remixed Nimaid's untested "a014" fully rounded finger hole version and added a Triforce symbol. Still learning how to play, but as you can see in the video this version also has trouble with the high notes (C and D). Nevertheless, still a…
🌋🐊 Inspired by The Legend of Zelda: Ocarina of Time MiniWorld3D 's entry for Prusa Printers Halloween Contest 2019 was this model of Dodongo's Cavern , the iconic second dungeon of The Legend of Zelda: Ocarina of Time, full of stunning…
Part of the collection of the 3 Spiritual Stones, the stone of water.
Inspired by The Legend of Zelda: Ocarina of Time MiniWorld3D celebrated Halloween of 2018 with this model of the Graveyard in Kakariko Village full of stunning details, from the tombstone inscriptions to the entrance to the Shadow Temple!…
⛪ The Temple of Time ⏳ Inspired by The Legend of Zelda: Ocarina of Time , MiniWorld3D artist @dude2k5 created this model of the exterior the Temple of Time that fits together with this separate model of the interior ! Due to the amazing…
These are a new neck and ring for the original ocarina to give it the look of the one seen in the new remake
Máscara Keaton de la saga de The Legend Of Zelda, concretamente de Majora's Mask y Ocarina Of Time. Pronto habrá más modelos de máscaras de este juego y mi idea es hacer todas las máscaras de la saga completa. Hago encargos…
Stand to hold Ocarina by @E.C.3D
As part of the October free Zelda commissions, here is the Kokiri Sword! let me know what you all think and make sure to post your makes and let me know if there is any trouble with the files, it does have a 0 tolerance for the blades so…
This is a remix of the original base for Dycus' Ocarina of Time Spiritual Stones. The base was cut into individual pieces for each stone and the total area reduced to use less filament as well as fit in smaller spaces. The prints from the…
Dead Hand Watch out for its infinite hands! Aim for its head! - Navi Terrible monsters plague Hyrule, and Link must conquer them throughout his adventures! This simple and small Zelda enemy figurine is inspired by its appearance in…
Deep past the sands of the Haunted Wasteland lies the colossal statue of the Gerudo goddess of the desert and entrance to the Spirit Temple. Inspired by The Legend of Zelda: Ocarina of Time , we bring you this miniature model of the…
⛪ The Temple of Time ⏳ Inspired by The Legend of Zelda: Ocarina of Time , MiniWorld3D artist @dude2k5 created this model of the interior the Temple of Time that fits together with the separate model of the exterior ! Due to the amazing…
Volvagia, the subterranean lava dragon that eats Gorons for breakfast and a disdain for hammers. This one is approximately 38mm scale and sits nicely on a 60mm base. The dragon and the lava base are printed separately.
Inspired by The Legend of Zelda: Ocarina of Time For the spookseason of 2021 we brought you his miniature model of the Bottom of the Well in Kakariko Village . This childhood-destroying, life-scarring, nightmare-inducing dungeon of The…
I wanted to make something that sits on my desk so it's not real scale. I used screenshots and based it off of what the game's graphics from the N64 looked like to me. The only thing that isn't based from the game is the shoulder of the…
I have made this over the course of 3 years
The intention of this experimental Ocarina design was to try to improve the fipple to make the upper notes work better right off the print bed before sanding. I guess you might call this a work in progress mainly because it needs some…
T he floating fortress of the King of Evil… From the location in The Legend of Zelda: Ocarina of Time , here is Ganon's Castle! Everything prints entirely without supports , parts can be printed separately and assembled after. Check out…
This simple Zelda figurine is inspired by its appearance in Ocarina of Time, originally for Nintendo 64, where, in the Bottom of the Well dungeon, Link has to play Zelda's Lullaby on a Triforce symbol on the floor to make water stop…
This model is compatible with the lego system.
120% scaled ocarina :)
Mexican themed ocarina (You have to print it in gold filament, let's see if the British museum tries to steal your newly made golden ocarina too) Return what was stolen, thieves!!! Layers: 3-4 Infill: 20-40% (Gyroid) :)
Here is the Bomb from the Legend of Zelda Ocarina of time, part of the Ocarina of time collection set, i recommend the orb facedown with organic supports though they are not required inside the orb itself.
This is a simple stand to fit Ocarina - fully playable by seggybop and Ocarina of Time by hockenmaier. Print Settings Printer Brand: FlashForge Printer: Creator Pro Infill: 20% Category: Music
Ocarina Stand for Night By Noble Ocarina. Just a stand for my ocarina.
Easy to print model, without supports but with rafts… I printed it with 25% gyroid infill, 3~4 walls and it sounds great
Ocarina Stand with Logo Print at 10% infill with a layer height of 0.1mm with a base layer of 0.2mm Filaments Used: Elegoo PLA Galaxy Black I really liked the ocarina stand made by Kytor - Ocarina Stand by Kytor | Download free STL model…
Works with most filament, let me know how it sounds coming from your printer
I searched for small stand to display my ocarina. Didn't find one… so i used my low tinkercad skills to create this. I just have a single color printer so i used pause command and color switch at layer hight to get second color. If you…
Basic model of the small dungeon key from Ocarina of Time. Will update once I get a chance to run it through my printer Added a second model which is smaller and added a keyring. Category: Video Games
Small Key from both The Legend of Zelda: Ocarina of Time and Majora's Mask. I couldn't find an STL of the key from these games, so I designed one in Fusion 360. I included the key by itself, and both a small earring sized loop and a…
Hey guys i went back and noticed that my original Sage medallions post were not as game accurate as i would of liked so i remade them. These contain the more coin shape that they appear to have in the original n64 versions.
Petite modélisation du bouclier de Link, dans Zelda Ocarina of Time, sur Nintendo 64 / n64. Merci Nintendo ! Personnal design of the Link's shield, from Zelda Ocarina of Time, on Nintendo 64 / n64. Thanks Nintendo !
I remixed based on feedback to make mouthpiece touch the bedplate and make the airflow less restrictive. I have not printed but it seems to slice correctly. I haven't printed myself but there is one make! Thanks and enjoy! I recommend…
The two sizes included are the sizes show in the photos. The larger one can be used to hold things like pens and pencils, flowers, etc. The smaller ones are just fun. All of the items are of the smaller size, but any of these models…
Daa-daaa-daaa-doneeee! You got the Boss Key! Now you can get inside the chamber where the boss lurks! Queen Gohma? Barinade? Morpha? What awaits behind that door? Use this key to find out! I included two different versions of the gem,…
Dual Ocarina stand for Soprano C and Alto C ocarina designed by E.C.3D https://www.printables.com/model/845214-ocarina-sc https://www.printables.com/model/474058-ocarina-of-time-12-hole-alto-c-ocarina I've printed many ocarinas here, but…
I decided to merge (and improve) the 45 degree mouth piece I made with this particular Ocarina so everything prints together in one integrated unit. I included my Fusion 3D project and step file along with the .stl file Looks like I am…
This is stand for Updated 12 Hole Ocarina Print Settings Printer: Artillery Genius Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 15 How I Designed This I really like Ocarina by RobSoundtrack. At the moment, I already have…
voici la Princesse Zelda en version Chibi ! Ce modèle est conçu pour être à la fois fun à imprimer et riche en détails. Accessoire : Zelda tient l'Ocarina en cristal. Le socle : Assorti à ma collection de bustes Zelda, avec des gravures…
Here is a recreation of the original Sage's Medallions from the n64 Legend of Zelda, Ocarina of time, if you enjoy this print, leave a like, comment, and follow on my media's for upcoming projects!
Update 1 ; 4/30/2026: I added a full length chain file so that it doesn't have to be printed in three parts. Update 2 ; 5/1/2026: I fixed the sizing of the screw on Hookshot_P2, so use the one that says fixed, and not the one that says DO…
I needed the name Carina in the Toyota font but couldn't find one, so I created it.
Thanks to NeoRame | Printables.com for the hookshot remix. Hookshot - Zelda: Ocarina of Time by NeoRame | Download free STL model | Printables.com These are additional parts to help with the final assembly. x2 different sleeves to help…
just a 6 holed ocarina i printed it and it worked for me
Petite modélisation du bouclier de Link, dans Zelda Ocarina of Time, de N64, dans une version porte-clés. Merci Nintendo ! Personnal design of the Link's shield, from Zelda Ocarina of Time, on N64, on a keychain version. Thanks Nintendo !…
Includes a .2mm gap between parts for easier assembly for those with less precise machines. Does require supports. Make sure to like and comment if you enjoy this print, the zelda item commission is still being held on tiktok, insta, and…
I designed a slip-on mouth piece for this particular ocarina in Fusion 360 that changes the angle of this Ocarina mouth piece by 45 degrees to make it more comfortable to play. I printed my ocarina at 80.7% scaling (Eb tuning) so I…
This simple and small figurine is inspired by The Legend of Zelda: Ocarina of Time video game for Nintendo 64, where Link encounters these large stone statues depicting an ominous bird on a tall pedestal, especially in the Shadow Temple.…
lithophane Poster Legend of Zelda Ocarina of Time N64 Nintendo Voici un lithophane d'un magnifique poster sur le thème de Legend of Zelda Ocarina of Time de Nintendo N64. Faites vous plaisir ! This is a lithophane from a beautiful Legend…
Hey guys after some requests I reuploaded the hookshot and Longshot to use a lot less material, also includes an alternate style hook for those who want a closer to classic look. (I plan to release a full line up of classic and remaster…
Rear Bumper Support Clip Toyota Corona Carina 92-96 T19
Part of my Ocarina of Time N64 Collection, here is the Golden Skulltula Token. Scale it up or down to use as coins or coasters at your leisure. Join my free Patreon to get updates on upcoming files and exclusives as well as place requests…
For people having trouble with the upper notes not playing on their Ocarina. I found a way to fix it with this sanding tool I created based on this model. I know this works because I just used it to fix mine! Use it to get a smooth sharp…
I tried to recreate the Longshot as close as possible while remaining as true to Nintendo's Original Render as much as I could. I also hollowed out the model as much as possible to reduce material cost, though do expect to use around…
The Ocarina Stand with a Master Sword Cutout in the Side of it. Also a Normal Stand Option but as an stl instead of a 3mf.
This is a zero tolerance version of my Hookshot Design. On high precision machines this print slots together with pressure and would not require glue to assemble.
This is a teardrop-shaped ocarina commonly found as a souvenir in Peru. It can also be worn around your neck by threading a strap through the hole. Notes: PLA is recommended for printing. Can be printed without a brim. Make sure to clean…
