Liczymy pasujące modele…
Especially for Valentine's Day, I created a cool version of the rose stem in maximum height (220 cm). The leaves can be shaped using a hot air dryer, as described in the original object…
Summary After a make of my previous model Led Light (Crystal on Rock) - USB powered was posted with the use of multi-colored LEDs, I decided to do more with this. It kind of ignited my imagination.... The model now presented is the…
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
After changing the nozzle on the Prusa Core One became a bit complicated, I created this tool to make things easier again. This is the revised version, you can now choose whether you would prefer the tool with or without a sock - left or…
Cooper Black font used.
There are a total of 9 spring-loaded figurines, each posed in a different way; they look hilarious when shaken. They only require monochrome printing, making the process straightforward. Before printing, we recommend cleaning the print…
This is inspired by a street skeleton puppet show( https://www.youtube.com/watch?v=MTgtbpj-dns ). Since ancient times, people's artistic expression of skeletons always contains a reflection on themselves. This Skull Statue can express…
"Commercial Script BT" font used.
Slice it up to you. I posted 3mf file for Slicer.
Hello Everyone I am sharing a design that changes the color of the print head fan housing logo. Compared to other available designs, mine works with any filament with full color coverage. Pictures do not show the full effect. The colors…
Tennis Racquet grip size can be changed by removing the “pallets” from the handle of the hairpin of the tennis racquet. I believe in the USA Head is planning to no longer make the TK82 pallets available, so this seemed opportune. The…
The Swatch Saver tool is designed to make changing Swatch watch batteries both easy and safe. It features: a tweezer with tips optimized for holding watch batteries a flat, rounded end matching the thickness and diameter of notches in…
printed with supports from plate only. Fits anything with a ¾ inch board and 3.5 inches tall. Remix of https://www.thingiverse.com/thing:4752580 but wouldnt let me link to it for some reason
I needed to remove the tyre from the rim of my NSR50 project and didn't want to damage it any more than it already is, so I designed these rim protectors. Note: The NSR's rims are pretty skinny, so I've included a small test piece so that…
The girls needed some earrings for the season. I printed the bulbs in spiral vase mode (9 at a time thanks to the new sequential printing option in PrusaSlicer 2.4, thanks slicer developers you are amazing). The screw ends print fine…
I got tired of using a piece of wood to prevent the saw blade from turning while loosening and tightening the retaining nut. I didn't want to buy a Bench Dog Blade-Loc so I designed my own with FreeCAD. I printed it on my MK3S with a 0.4…
Hello there! This is a Rotating City I designed. All 3 sections move at different speeds to give the perception that the city is changing over time. I kept the discs round so other people can make their own versions a lot easier, they can…
Small container that fits on the IKEA Myllra changing table and Myllra bed, to keep commonly used products close by. Water tight, so can be used for washing too. I ended up with multiple, they're very useful especially since IKEA's own…
"Is it magic, or is it smart engineering?" Spark curiosity and amazement with the MagicBox , a 3D-printable magic box designed to instantly transform the color of a ball right before your eyes! Place the red ball into the socket, slide…
Small container that fits on the IKEA Myllra changing table and Myllra bed, to keep commonly used products close by. Water tight, so can be used for washing too. I ended up with multiple, they're very useful especially since IKEA's own…
I case that your kid is really active during diaper changing and you have no time to bend your back to the lower shelf.
This is a sliding letter changing sign that I made! All done in Solidworks and Adobe Illustrator. I have a video linked down below on the whole process of making it if you're interested. Be sure to print 3 of the retainer pieces and 2 of…
Was having a hard time keeping everything in order on our changing table so I quickly tossed together a station to hold all of our supplies. Large top compartment holds about 15-25 diapers (depending on size) Lower tray holds your…
I remodeled the eyes to be printed flat. The Pupil is now part of the eye and slightly rased to easier painted or with manuel filament change to print in a differend colour. On 33% scale and 0.15mm layer high you have two layers I used a…
This lamp is modern and timeless; as a lamp, I would recommend the LED lamp from bambu. To see the light in other colors, you need the small disc which you then print in the desired color and place on the lamp. Here you can see my newest…
The bottom is separate to accommodate a easier print and design. The bottom can be lose or glued in place. Standard settings. It is possible to print with a 0,6mm nozzle. PETG is recommended due to easier cleaning.
*UPDATED APRIL 2026 * V 05 Same basic design but with a spring-loaded locking retainer for the blade. Two-piece design. Just superglue the back end of the spring into the top of the handle (locate the peg on the spring into the hole in…
s <iframe width="714" height="402" src=" Introducing SwapBot Tool changing rover: capable of self-tooling and equipped with interchangeable batteries. It smartly recognizes tools via I2C addresses, ensuring efficient operation. In…
The holder is attached to the top of the three screws that hold the extruder, and the other two are simply threaded through the holes for support and better flow. I have attached a photo. I designed it using the KOMPAS-3D software.
Water changing adapter for Hydroponictower from @blove_45981.
Gridfinity 4x1 Holder for Bergeon 6767 and two inserts Fully Gridfinity compatible including holes 2HU (14mm) plus 4.4mm according to Gridfinity standards I updated the model to be fully Gridfinity compliant, thinner, and have another…
A beautiful lantern with interchangeable panels and you can also stack the lanterns as often as you like. There is a lantern for electric tea lights and a lantern for the LED lamp kit 01, To stack the lantern there is an intermediate…
Remixed model for diaper changing table wipes holder. Wipes they are for is Kirkland Costco brand. fits ¾ inch board and is 3.5 inches tall. print solid side down with no supports. Remix of this model but it wont let me link it for some…
This is a two-tone, color changing, crystalline dice vault! 3D modeled from scratch with many angles to catch the light and really showcase the beautiful dual-color Matter Hacker Quantum color changing filament! It also has a neat…
The changing table on the model #1780633 Pack N Play tilts because it is only supported on one side. My wife asked me to come up with a solution because she was tired of our baby rolling off. Here's my solution. Print 2 braces - one for…
Printed from TPU! Hard fillaments may be too small or can fall off!
Parts: LED 5mm, Slow RGB Flash, fog TP4056 Lithium Battery Charger Module, USB C 5V To 3.3V DC-DC Step Down Power Supply Buck Module AMS1117 switch SS-12F15 battery H36 3.7v 150mah 30C wires Tools: Electric soldering iron Filament:…
These are labels designed to go on a dish washer so you can mark wether it is currently dirty or clean. They are setup to to be printed in 3 colors using layer change multi-material. The .3mf files are already pre-configured with the…
Horia jeweling tools come with either 3mm or 4mm replaceable spindles; this support aides in the process of changing them out. The support features 2 ends: one contains a simple taper, the other is slightly more recessed with a flat and…
After I need to show on a Halloween party that I need something (you know … a re-fill), I wanted to have a color switch on the Plumbob. So I wired my own circuit with green and red LEDs and put a holder for a switch. The battery is a…
Thanks to the idea of Surfalex2000, https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu/comments Here is my version without screws
I made these little tags to put on my tires so when I change my winter tires to my summer tires, I know where to rotate the tires.
Time for a bit of background : This build, and all of my related trefoil knot builds, were inspired by this video by “Big Clive” : https://www.youtube.com/watch?v=35xmE8Nurj8 The object in that video was actually flat, and the 3D effect…
This adapter is to be screwed to the PRUSA filament guide. Up to 5 materials can be inserted to make a manual filament change in case of missing the MMU3 upgrade for MK4. I used my old MMU2 Buffer to store the loop after pushing back the…
This is a coaster that features a color-changing inlay. When a hot beverage is set down on the coaster, a biohazard symbol emerges. The color changing filament is M3D's Chameleon 3D Ink. Because it is subjected to heat, I made the coaster…
This practical bottle holder is specially designed for changing tables with a 19mm bar. It fits most 0.5-liter bottles, ensuring essential drinks are always within reach – perfect for busy parents! The model is easy to mount and…
Do you need more space on your changing table now that your baby is getting bigger? Consider giving this attachable shelf a try. Most baby wipe warmers should fit and the shelf can be mounted on varying widths of changing table trim by…
Hello Everyone Since 2014, I am a maniac of building automation, or colloquially speaking, smart home solutions. Currently, my home is practically 100% automated. I have 7 pieces of IKEA TRADFRI On/Off Switch. It is present in few room of…
I bought this cheap nozzle tool set and wanted to organize it with Gridfinity. Thought I may as well put this out there in the off chance someone has the same kit
Support for a Graco Pack'n'Play Diaper Changing station so baby doesn't roll off
Has twist lock base for light, light is bambu MH001 style. I printed in plain white pla 4 walls helps with internal twist lock strength
We didn't have much space on top of our changing table. We had everything we needed on shelves underneath which became inconvenient quickly when changing a baby's diaper. I made a set of bins with hooks that could be interchanged. this…
Additional Parts: 2 x M6 hex nuts 2 x M6 x 25 mm hex screws 4 x M4 x 35 mm allen screw 4 x M4 hex nuts 2 x M3 x 8 mm allen screw 2x M3 x 4 inserts 2 printed M6 knobs Print: GreenTechPro or other stiff material no Support
Diese Haltung für Kosmetiktücherboxen ist für einen Wickeltisch mit einer Holzdicke von 18mm konstruiert. Die Kosmetik-/Taschentücher box ist für standard Tempo/Müller/Hofer/Aldi Boxen ca. L230xB65mm This holder for cosmetic/tissue boxes…
We use plastic grocery bags to hold the slinkiest of diapers. This little hook slides on the rail of our changing table. Put table has an 18mm rail that this hook slides onto.
for one hand operation
needed a shelf for the hatch light beside the changing table and needed storage for diapers that was out of kicking range. the changing table has ¾ inch sides these were made to fit on. The shelf prints without support on its side. The…
I bought an American Lighting Color Changing Neon Flex Light kit from Costco and wanted to put it up against some shelves I have on my wall. The kits comes with 10 brackets and I wanted more so I designed this OpenSCAD file that allowed…
Designed this to work with an IKEA Gulliver changing table as somewhere to have nappy bags open without holding them. It also avoids feet in dirty nappies. Come on we have all been there.
I needed to change a cutout for a Neutrik A-type outlet (22mm cutout) to a D-type cutout (24mm). For the main hole this is easy with a step drill, but the different position of the mounting screws is a bit messy, since they overlap with…
This lets you move the stock fan from over the z and e stepper drivers to above the x and y drivers (these are the ones overheating on e3v2). I also suggest doing 3 other things. Remove the board from under the heated bed to avoid that…
Choose a printing setting that you prefer and print. Print instructions Category: Household Summary Choose a printing setting that you prefer and print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Additional Parts: 4 x M6 x 50 mm L-screws: https://www.ebay.de/itm/123620430705?var=424477351005 4 x M6 cap nuts 4 x M4 x 35 mm allen screw 4 x M4 hex nuts 4 printed M6 knobs Print: GreenTechPro or other stiff material a few Support
This tool is essentially a wing‑nut–style wrench with a hexagonal cutout designed to fit a standard Prusa nozzle. It allows you to change your nozzle without using a traditional open‑end wrench. The main advantage over a regular wrench is…
Take the guesswork out of making sure your shower is the right temperature - not too hot, and not too cold. The temperature-sensitive thermochromic pigment in this clip changes from dark gray to orange at 88ºF / 31ºC, and from orange to…
Somewhere between kids we lost the attachment tubes that connect the changing table to the Pack ‘n play, so I designed me some! If you’re in the same pickle, hope this helps! And if you need the kickstand part, there's a couple of models…
This pumpkin is a customizable Halloween decoration featuring a range of expressive, interchangeable faces. Using 6 embedded magnets (6x2mm), the design allows you to easily swap between various face designs, from traditional spooky…
Screwdriver handle heavily "inspired" from the LTT STUBBY SCREWDRIVER. Pair it with a hex bit socket (7mm ) for easy nozzle changing. The fit between bit and handle is very thight, you might need to increase horisontal expansion.
These will connect to the top rail on a Graco Lauren Changing Table. Rail measurement 20mm x 30mm. Note: have to unscrew the rail to install. prevents failing off easy The Diaper holder can hold 6 diapers at single time. The small Basket…
Make baby care areas easy to locate with this Baby Changing Station Sign, perfect for public or private restrooms. The STL file includes a clean and modern design optimized for dual-color printing, ensuring clear visibility and a…
My son will only allow us to change his diaper now if he's watching Miss Rachel on Youtube. It's difficult to find a place for him to watch and keep him on his back. This little workup solved the problem. The Screw and Nut are remixed…
As a new parent, I got really sick of having to bend over to get the various things I needed below my baby a dozen times a day. It started as just a wipes holder, and then got a various tubes and lotions add on. And then another when we…
I saw this tower here and print it. Tried to print it with and without supports, but it does not work for me. So I decieded to print parts and put them together with screws. Print "HAPE Quadrilla Turm Rot Wechsler1.stl" twice with a…
This is a charging cradle for the Sony Xperia Z1. It works nicely, for me. However, I had to fix the cable in its hole using a bit of sugru. The cable is a cheap charging cable I found on ebay. (Like this one:…
Overview I'm proud to show you a model made specifically to aid those with sight disabilities. I consulted a sensory disability specialist while designing this. The marker on the knob and ring are very sharp and therefore tactile,…
Made 2 Hooks for the IKEA Hensvik Changing Table so my mother can hang kid backpacks on there for the home daycare she runs. Recommended to print in ABS or PETG but PLA should work
We bought a diaper changing mat from IKEA. Unfortunately, IKEA only sells changing tables as a whole, so there is no possibility to buy a chest of drawers of your choice and add attach a separate changing table-top on to the chest of…
This is my colour-changing bed lamp. It is powered from USB and can cycle through a selection of pleasing colours with the press of a button. There are also some different soothing animations. The model is designed to slip onto my…
Using the PuckDaddy extension for the Malm dresser, you will notice that there is no real mounting kit to screw it to the Ikea Malm. It will slide around and is not safe at all. Have designed this brackets to mount the extension to the…
Magical Colorchanging Cup a truly magical trick where you can chang the color of a solid cup. if you run out of magic though, you can put the white cup onto the brown one, when you take it off again squeeze it a little to hold the brown…
This attaches to Greco Lauren diaper changing stations and allows you to secure an Owlet base station inside.
There's a hole for an M5x6x7 heat-set insert, but it's not necessary. You can put a bit of silicone or CA on the threads and it will hold.
This is a 3D-printed logic puzzle called Changing Four . It’s a simple but brain-twisting game where the goal is to swap the positions of the red and blue pieces on the block — but under strict rules that force you to think ahead! 🎯 Game…
The craziest project of this year. PrusaWIRE XL StealthChanger and Prusa XL VINDX Hotend Toolchanger PrusaWIRE XL StealthChanger is currently under active development. Throughout the design process, numerous concepts and engineering…
I wanted a cool changing stand for my bip 5, so I modified(not that well tbh since I didn't want to mess with fusion360) the magnemite model, adding a charging cable hole to the screw head. I cut the screw head to reduce the use of…
The hinges can be used to add a front door to a changing table. Useful to prevent the baby from falling when it has to be left alone for a short time. It may be necessary to increase the wall height - depends on the changing table used. A…
I am learning to use Fusion 360 and this is another experiment invention I designed. Its basically a multi-purpose building block that and be use to: Build sculpture Play games like tic-tac-toe, for in a row, Othelo, and many other Make…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Only changes from the owlet base station are to extend it up higher to better secure the lamp and to make the USB slot thinner so it didn't twist around too much.
This design uses ¾ x 2.5 inch pine for most of the assembly and ¾ x 5 inch for the back.. It's soft and easy to work with. You'll need to print the clamshells for the front. They are reversible from left to right. The rear piece can be…
I wanted to do some custome changing table for our newborn. Because we dont have very much space in our flat i decided to do it difrently. I drawed a hinges and bearing surfaces and printed it (the files are here). The rest is on you. You…
This is a tool to mark the holes on the table legs to change the height of shelfs, it could be used also to check the existing hole positions in case the table doesn't fit in properlywe.
Paper towels can never be close enough when you need them. This paper towel dispenser clips onto the side rail of a Delta Children Eclipse changing table with no additional hardware needed. They're in arm's reach, but out of the way of a…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Just print two halves and screw them together using a sawed-off M3 screw (8–10 m).
A Project Box to fit the Velleman Voice Changing Electronics Kit
Hello fiends, In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which i purchased having 1.75mm full metal throat. While printing the filament jams and prints were wasted. I fed up with…
A practical mobile holder designed to hang a baby mobile – perfect above a changing table or next to the crib. No drilling required: simply use two Tesa picture hanging adhesive strips (1 kg capacity each). The mount attaches securely to…
We couldn't fix the heating lamp for our baby on the wall so I designed a system to hold the lamp above the changing table. I used 40mm wood rods as base. The System is fully movable in all direction and is fixed on the STUVA changing…
